Tag: M.W:200-300

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 22300-52-3, name is 4,5-Dibromo-2H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C2HBr2N3

The 10.0g (44.1mmol) 4,5- dibromo -2H-1,2,3- triazole (commercially available) was dissolved in 90ml of tetrahydrofuran was added 6.1g (44.2mmol) of potassium carbonate, cooled to -10 , was added 7.5g (53mmol) of methyl iodide.In the 35 ~ 40 to react until the reaction is complete.50ml of water was added, the tetrahydrofuran was distilled off, 90ml and extracted with methyl tert-butyl ether, dried over anhydrous magnesium sulfate, and concentrated to dryness under reduced pressure, the residual solid was added methyl tert-butyl ether, 10ml, 70ml of n-hexane was added slowly, solid precipitation, the addition was completed, stirring at room temperature for 1 to 2 hours.Filtered to give pure 4,5-dibromo-1-methyl -1H-1,2,3- triazole 5.8g, 57% yield.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 22300-52-3, and we look forward to future research findings.

Reference:
Patent; The Haiya Chemical Co., Ltd.; Jiang, Yueheng; Que, Limin; Xu, Jun; Qin, Dongguang; Cai, Tong; (17 pag.)CN105585534; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid

General procedure 9Ar2-COOH (1 eq; prepared according to WO 2008147518 for compounds 49-51 ), HOBT (1 eq) and EDCI. HCI (1.5eq) dissolved in dichloromethane (5ml/mmol) were stirred at 25 C for 0.5-2hours, then intermediates 67-68 dissolved in dichloromethane were added. After 18 hours the mixture was poured in an aqueous saturated solution of NaHCO3 and extracted with dichloromethane. The crude was purified by silica gel column chromatography (DCM to DCIWMeOH = 9/1 )

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 956317-36-5.

Reference:
Patent; ROTTAPHARM S.P.A.; STASI, Luigi, Piero; ROVATI, Lucio; WO2011/6960; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 23579-79-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 23579-79-5, name is 3,5-Dibromo-1-methyl-1H-1,2,4-triazole, molecular formula is C3H3Br2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

In a 25 mL round bottomed flask, 3,5-dibromo-1-methyl-1H-1,2,4-triazole (Int-41, 442 mg, 1.84 mmol) was dissolved in DMF (4 mL) and potassium carbonate (483 mg, 3.5 mmol), followed by 3-fluorophenol (200 mg, 1.75 mmol) were added. The reaction mixture was stirred for 18 h at 100 C. After cooling, it was concentrated in vacuo, the residue was purified directly by column chromatography (silica gel, 70 g, eluting with ethyl acetate / n-heptane, gradient 0: 100 to 20:80 v/v) to afford the title compound as white solid (397 mg, 83%). HPLC (method LCMS_fastgradient) tR= 1.05 min. 1H NMR (CDCl3, 300 MHz): delta 3.78 (s, 3 H), 6.94-7.02 (m, 1 H), 7.06-7.14 (2 H), 7.34-7.43 (m, 1 H). MS (ES+) m/z 272.1, 274.1 [M+H, Br isotopes].

In the meantime we’ve collected together some recent articles in this area about 3,5-Dibromo-1-methyl-1H-1,2,4-triazole to whet your appetite. Happy reading!

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 217448-86-7, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 217448-86-7, name is Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, molecular formula is C11H9F2N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A 250 mL two-necked round bottomflask was charged with sodium azide (6.10 g, 93.8 mmol), compound2 (1.90 g, 6.84 mmol), and water (20 mL). After the solidwas completely dissolved, compound 1a (5.0 g, 31.37 mmol) andCH3CN (80 mL) were added. The mixture was stirred at room temperaturefor 3 h, and then the CH3CN layer was separated. To theCH3CN solution were added Cu2O-NP (0.42 g) and compound 4(2.80 mL, 31.3 mmol), and the reaction mixture was stirred for8 h at room temperature under protection of inert gas. The mixturewas filtered and the filtrate was concentrated, and was chargedwith methanol (40 mL) and 35% ammonia in water (100 mL). The mixture was heated to 65 C and refluxed for 4 h, cooled to roomtemperature, and filtered. The resulting solid was washed withwater and methanol to obtain rufinamide (5.25 g, 71.6%) as colorlesscrystalline product. Mp: 242-244 C. 1H NMR (400 MHz,DMSO-d6) d 8.549 (s, 1H), 7.842 (br s, 1H), 7.566-7.470 (m, 2H),7.215-7.174 (m, 2H), 5.723 (s, 2H). 13C NMR (100 MHz, DMSOd6)d 162.5, 161.7, 160.0, 143.3, 132.3, 127.4, 112.4, 111.5, 41.66.MS (ESI+): 239.06.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, hurry up and to see.

Reference:
Article; Wang, Jing-Han; Pan, Cheng-Wen; Li, Yong-Tao; Meng, Fan-Fei; Zhou, Hong-Gang; Yang, Cheng; Zhang, Quan; Bai, Cui-Gai; Chen, Yue; Tetrahedron Letters; vol. 54; 26; (2013); p. 3406 – 3409;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid

HOBt.H2O (1.1 g, 7.4 mmol) and EDC.HCl (1.4 g, 7.4 mmol) were added to a solution of 3,3-diethoxypropan-1-amine (0.96 mL, 5.9 mmol) and 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (1.0 g, 4.9 mmol) in DMF (18 mL), followed by stirring at room temperature for 3 hours. An aqueous NaHCO3 solution was added to the reaction solution, followed by extraction with EtOAc. The organic layer was washed with water and brine and was dried with Na2SO4. The desiccant was then removed by filtration, and the solvent was distilled off under reduced pressure. The resulting residue was purified by column chromatography (KP-Sil: 25 g, hexane/EtOAc=85/15 to 0/100) to give the titled compound (1.6 g, colorless solid). MS (ESI pos.) m/z: 333 [M+H]+

If you are hungry for even more, make sure to check my other article about 956317-36-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; TAISHO PHARMACEUTICAL CO., LTD.; Suzuki, Ryo; Futamura, Aya; Abe, Masahito; Kashiwa, Shuhei; Hattori, Nobutaka; Nozawa, Dai; Ohta, Hiroshi; Araki, Yuko; US2014/81025; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 956317-36-5, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride(WSCHCl) (37.4 g, 0.20 mol) was added to a solution of Nethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-1-yl] ethanaminedihydrochloride (50 g, 0.16 mol), 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (33.9 g, 0.18 mol), 1-hydroxy-1H-benzotriazolehydrate (HOBtH2O) (26.4 g, 0.20 mol) and triethylamine (TEA)(39.5 g, 0.39 mol) in THF (500 mL) at 0 C, followed by stirring atroom temperature for 20.5 h. The solvent of the reaction solutionwas distilled off under reduced pressure. An aqueous NaHCO3 solutionand EtOAc were added to the resulting residue, followed byextraction with EtOAc. The organic layer was washed with water,and the solvent was distilled off under reduced pressure to yieldthe crude product (72 g). An additional 196.7 g of the crude productwas synthesized using the same method from N-ethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-1-yl] ethanamine dihydrochloride(140 g, 0.46 mol) and 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoicacid (94.8 g, 0.50 mol). The obtained crude product (268.7 g) wasrecrystallized with heptane and EtOAc. The deposited solid wasthen collected by filtration. The obtained solid was dried by heatingunder reduced pressure to yield the title compound 27e as acolorless powder (217.3 g).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, hurry up and to see.

Reference:
Article; Suzuki, Ryo; Nozawa, Dai; Futamura, Aya; Nishikawa-Shimono, Rie; Abe, Masahito; Hattori, Nobutaka; Ohta, Hiroshi; Araki, Yuko; Kambe, Daiji; Ohmichi, Mari; Tokura, Seiken; Aoki, Takeshi; Ohtake, Norikazu; Kawamoto, Hiroshi; Bioorganic and Medicinal Chemistry; vol. 23; 6; (2015); p. 1260 – 1275;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 23579-79-5, name is 3,5-Dibromo-1-methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 23579-79-5

In a 25 mL round bottomed flask, 3,5-dibromo-1-methyl-1H-1,2,4-triazole (Int-41, 536 mg, 2.23 mmol) was dissolved in DMF (4 mL) and potassium carbonate (615 mg, 4.45 mmol), followed by 4-fluoro-3-(trifluoromethyl)phenol (401 mg, 350 mu, 2.23 mmol) were added. The reaction mixture was stirred for 18 h at 100 C. After cooling, it was concentrated in vacuo, the residue was dissolved in dichloromethane (15 mL) and saturated aqueous solution of sodium carbonate (15 mL). Phases were separated, the aqueous layer was extracted with dichloromethane (2 x 15 mL), the combined organic layers were dried (sodium sulfate) and concentrated in vacuo. The crude product was purified by column chromatography (silica gel, 20 g, eluting with ethyl acetate / n-heptane, gradient 0: 100 to 50:50 v/v) to afford the title compound as white solid (737 mg, 97%). HPLC (method LCMS_fastgradient) tR= 1.28 min. 1H NMR (CDCl3, 300 MHz): delta 3.80 (s, 3 H), 7.23-7.31 (m, 1 H), 7.53-7.61 (m, 2 H). MS (ES+) m/z 340.0, 342.0 [M+H, Br isotopes].

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 3,5-Dibromo-1-methyl-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 7411-23-6, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

3,5-dibromo-iH-1,2,4-triazole (48.1 mg, 0.212 mmol) and BF3OEt2 (53 mul, 0.418 mmol) were added to a stirred solution of Intermediate 6 (25.4 mg, 0.042 mmol) in 1,2- dichloroethane (0.42 ml). The reaction mixture was a yellow solution that was heated to 50C. After 1.5 hr, the reaction mixture had become an orange suspension. LCMS and 1H NMR showed complete consumption of Intermediate 6. The reaction mixture was cooled to room temperature, the solvent was evaporated, and the resulting residue was placed under high vacuum. The residue was dissolved in methanol and purified using a single HPLC run on a 19 x 150 mm Sunfire Prep C 18 OBD 10 mum column by eluting with acetonitrile/water + 0.1% TFA. The HPLC fractions of the faster eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 33 A (2.1 mg) as a white solid. The HPLC fractions of the slower eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 33B (25.9 mg) as a white solid.EXAMPLE 33A:1H NMR (CD3OD, 600 MHz, ppm) delta 0.76 (s, 3H, Me), 0.76 (d, 3H, Me), 0.82 (d, 3H, Me), 0.84 (d, 3H, Me), 0.85 (d, 3H, Me), 0.89 (d, 3H, Me), 0.90 (s, 3H, Me), 1.03 (s, 3H, Me), 1.16 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.35 (m), 1.40-1.44 (m), 1.46-1.52 (m), 1.55-1.65 (m), 1.75-1.97 (m), 2.12-2.22 (m), 2.25-2.31 (m), 2.38 (dd, 1H, H13), 2.84 (s, 1H, H7), 2.85 (d, 1H), 3.49 (d, 1H), 3.56 (dd, 1H), 3.56 (d, 1H), 3.61 (d, 1H), 3.96 (d, 1H), 4.19 (d, 1H), 5.53 (dd, 1H, H5), 5.92-5.98 (m, 1H, H14).Mass Spectrum: (ESI) m/z = 795.22 (797.22) (M+H).EXAMPLE 33B:1H NMR (CD3OD, 600 MHz, ppm) delta 0.76 (s, 3H, Me), 0.76 (d, 3H, Me), 0.84 (d, 3H, Me), 0.85 (d, 3H, Me), 0.87 (d, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 0.93 (s, 3H, Me), 1.15 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.34 (m), 1.39-1.43 (m), 1.47-1.65 (m), 1.75-1.96 (m), 2.10-2.22 (m), 2.34 (dd, 1H, H13), 2.84 (s, 1H, H7), 2.96 (d, 1H), 3.48 (d, 1H), 3.54 (dd, 1H), 3.54 (d, 1H), 3.58 (d, 1H), 3.84 (d, 1H), 3.93 (d, 1H), 5.49 (dd, 1H, H5), 5.71-5.77 (m, 1H, H14).Mass Spectrum: (ESI) m/z = 795.21 (797.19) (M+H).

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 7411-23-6.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SCYNEXIS, INC.; GREENLEE, Mark, L.; WILKENING, Robert; APGAR, James; SPERBECK, Donald; WILDONGER, Kenneth, James; MENG, Dongfang; PARKER, Dann, L.; PACOFSKY, Gregory, James; HEASLEY, Brian, Haid; MAMAI, Ahmed; NELSON, Kingsley; WO2010/19204; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 25537-64-8, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 25537-64-8, name is 4,5-Dibromo-1-methyl-1,2,3-triazole, molecular formula is C3H3Br2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The 2.0g (8.30mmol) 1- methyl-4,5-dibromo -1H-1,2,3- triazole was dissolved in 15ml of tetrahydrofuran, cooled to -10 deg.] C, was added dropwise 4.77ml (9.55mmol) 2.0 M isopropylmagnesium chloride / tetrahydrofuran solution (commercially available, concentration 2.0M), 15ml of hydrochloric acid, using 20ml methyl tertiary butyl ether, and the extract was dried over anhydrous magnesium sulfate and concentrated under reduced pressure to 5ml, it was cooled to 0-5 crystallization, filtration, 40 dried in vacuo to give 4-bromo-1-methyl -1H-1,2,3- triazole 1.55 g, yield 90%

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 4,5-Dibromo-1-methyl-1,2,3-triazole.

Reference:
Patent; The Haiya Chemical Co., Ltd.; Jiang, Yueheng; Que, Limin; Xu, Jun; Qin, Dongguang; Cai, Tong; (17 pag.)CN105585534; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7411-23-6, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of 3,5-dibromo-lh-l,2,4-triazole (150.0 g, 661.2 mmol) in tetrahydrofuran (1500 mL) was slowly added p-toluenesulfonic acid (17.1 g, 99.2 mmol), followed by 3,4-dihydro-2h-pyran (166.9 g, 1983.6 mmol) at 0 C. After addition, the reaction mixture was heated at 70 C for 3 h and concentrated under reduced pressure. The residue was poured into water (500 mL) and adjusted to pH = 9 by addition of saturated aqueous sodium bicarbonate. The resulting mixture was extracted with ethyl acetate (3 x 400 mL). The combined organic layers were dried over sodium sulfate and concentrated under reduce pressure. The resulting crude product was washed with methanol (2 x 50 mL), dried under reduced pressure to give crude 3,5-dibromo-l-tetrahydropyran-2-yl-l,2,4- triazole (155 g, 75%) as a white solid. XH NM (400 MHz, CDCI3) delta 5.49 – 5.46 (m, 1H), 4.12 – 3.99 (m, 1H), 3.72 – 3.61 (m, 1H), 2.38 – 2.26 (m, 1H), 2.18 – 2.07 (m, 1H), 1.98 – 1.90 (m, 1H), 1.78 – 1.60 (m, 3H).

I am very proud of our efforts over the past few months and hope to 3,5-Dibromo-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; CHEN, Huifen; HAMILTON, Gregory; PATEL, Snahel; ZHAO, Guiling; DANIELS, Blake; STIVALA, Craig; (208 pag.)WO2019/72942; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics