Tag: M.W:100-200

Some common heterocyclic compound, 626248-56-4, name is 3-(2H-1,2,3-Triazol-2-yl)aniline, molecular formula is C8H8N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 626248-56-4

Step 5: To a clean 150 mL flask were added to following reagents: compound J21 (100 mg, 0.29 mmol), 3-(2H-l,2,3-triazol-2-yl)aniline (compound J4, 94 mg, 0.58 mmol), fine-powder cesium carbonate (293 mg, 0.90 mmol), Q-Phos (l,2,3,4,5-pentaphenyl-l ‘-(di- tert-butylphosphino)ferrocene) (21 mg, 0.03 mmol; Aldrich No.675784) and Pd(dba)2 (bis(dibenzylideneacetone)palladium(O)) (35 mg, 0.06 mmol; Aldrich No.227994). To the mixture was then added 20 mL toluene. The resulting slurry was degassed using argon stream gently for 3 min. It was then sent to 110C bath with an air-cooled condenser on top and stirred under argon for overnight. The mixture was then cooled to RT and concentrated on rotovap to remove all the solvent. To the residue were added 150 mL EtOAc and 50mL water. After vigorously stirring for 15-30 min, the organic phase was separated, and the aq phase and the black junks between org and aq phases were all discarded. The EtOAc phase was then washed with brine twice. The organic phase was dried over MgS04, concentrated and subjected to flash column with 0%-10% EtOAc in DCM to isolate the desired product, compound J22.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 626248-56-4, its application will become more common.

Reference:
Patent; PORTOLA PHARMACEUTICALS, INC.; JIA, Zhaozhong, J.; SONG, Yonghong; XU, Qing; KANE, Brian; BAUER, Shawn, M.; PANDEY, Anjali; WO2012/61418; (2012); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 815588-93-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 815588-93-3, name is 1-Methyl-1H-1,2,4-triazole-5-carboxylic acid, This compound has unique chemical properties. The synthetic route is as follows.

A mixture of 1 -methyl-1 H-1 ,2,4-triazole-5-carboxylic acid (7.0 g, 55.1 mmol) in SOCI2 (20 mL) was heated to 70 °C for 2 h. The mixture was concentrated to dryness. The residue was dissolved in Nh /MeOH (7M, 40 mL) and stirred at rt overnight. The precipitated solid was filtered off, extracted with Et20 and dried under reduced pressure to give the title compound

The chemical industry reduces the impact on the environment during synthesis 1-Methyl-1H-1,2,4-triazole-5-carboxylic acid. I believe this compound will play a more active role in future production and life.

Reference:
Patent; PHENEX PHARMACEUTICALS AG; STEENECK, Christoph; DEUSCHLE, Ulrich; ALBERS, Michael; HOFFMANN, Thomas; (64 pag.)WO2018/141855; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

Step C: (2-(2H-1,2,3-triazol-2-yl)phenyl)((1S,4S,6R)-6-((5-(trifluoromethyl)pyridin-2-yl)amino)-2-azabicyclo[2.2.1]heptan-2-yl)methanone To the title compound of step B (30 mg) and intermediate A-1 (19 mg, 0.10 mmol) in DMF (1 mL) was added DIPEA (94 muL, 0.55 mmol) and HATU (38 mg, 0.10 mmol), and the reaction mixture was stirred at room temperature for 1 h. The reaction was quenched by the addition of H2O and the aqueous layer was extracted with 4:1 EtOAc/hexanes (3*). The combined organics were washed with H2O, 5% aqueous LiCl, brine, dried with Na2SO4, filtered, and concentrated. Purification via silica gel chromatography (25-100% EtOAc (with 10% MeOH) in hexanes) gave the title compound (20 mg). MS (ESI) mass calcd. C21H19F3N6O, 428.2; m/z found 429.1 [M+H]+. 1H NMR (400 MHz, DMSO-d6, Compound presents as a mixture of rotamers, major rotamer reported) delta 8.10 (s, 2H), 7.94-7.77 (m, 1H), 7.70 (d, J=8.1 Hz, 1H), 7.67-7.49 (m, 2H), 7.28 (td, J=7.7, 1.5 Hz, 1H), 6.96-6.82 (m, 1H), 6.77-6.56 (m, 2H), 3.96 (br. s, 1H), 3.64 (br. s, 1H), 3.33-3.25 (m, 1H), 3.23-3.14 (m, 1H), 2.15-2.00 (m, 1H), 1.44-1.33 (m, 1H), 1.23-1.03 (m, 2H), *1H buried under DMSO-d6 peak.

The synthetic route of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; GELIN, Christine F.; LEBOLD, Terry P.; SHIREMAN, Brock T.; US2014/275118; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 4928-87-4, A common heterocyclic compound, 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To an ice-cold solution of CLB (0.21 g, 1.0 mmol) in DMF (1.2 mL), TCA (0.14 g, 1.2 mmol), iPr2NEt (0.52 mL, 3.0 mmol) and bromotripyrrolidinophosphonium hexafluorophosphate (PyBrOP) (0.67 g, 1.44 mmol) were added sequentially. The reaction mixture was stirred at ambient temperature for 2 h and then diluted with EtOAc. The organic phase was washed twice with a 5% aq solution of NaHCO3 and thrice with H2O, dried over Na2SO4 and evaporated to dryness to afford an oily residue. Conjugate 8 was purified with FCC. Yield: 0.25 g (80%); white foam; Rf (CHCl3/MeOH 8:2): 0.26; IR (KBr, cm-1): 3122, 3028, 2927, 2840, 1655, 1541, 1426, 1334, 1256, 1062, 807, 739; MS (ESI, 30 eV): m/z 637.19 [2 M+Na], 346.33 [M+K], 330.39 [M+Na], 308.41 [M+H]; HRMS (m/z): [M+H]+ calcd for C12H14N5O5, 308.0995. Found: 308.0948; 1H NMR (d6-DMSO, 40 C): delta 8.40 (s, 1H), 8.13 (d, J = 8.8 Hz, 2H), 7.68 (d, J = 9.2 Hz, 1H), 7.62 (d, J = 8.8 Hz, 2H), 7.61 (s, 1H), 7.00 and 6.99 (two s, 2H), 5.13 (d, J = 2.4 Hz, 1H), 4.22-4.15 (ddt, J = 2.4, 7.6 and 9.2 Hz, 1H), 3.66 (1H, dd, J = 7.6 and 10.8 Hz), 3.52 (1H, dd, J = 7.6 and 10.8 Hz); 13C NMR (d6-DMSO): delta 172.6, 158.1, 152.0, 146.9, 135.6, 127.6 (2C), 123.5 (2C), 69.4, 61.0, 56.7.

The synthetic route of 4928-87-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Magoulas, George E.; Kostopoulou, Ourania N.; Garnelis, Thomas; Athanassopoulos, Constantinos M.; Kournoutou, Georgia G.; Leotsinidis, Michael; Dinos, George P.; Papaioannou, Dionissios; Kalpaxis, Dimitrios L.; Bioorganic and Medicinal Chemistry; vol. 23; 13; (2015); p. 3163 – 3174;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C2H2BrN3

5-Bromo-l-(4-methoxy-benzyl)-lH-[l,2 4]triazole In a 100 mL round-bottomed flask, 3-bromo-lH-l,2,4-triazole (3 g, 20.3 mmol, Eq: 1.00), 1- (chloromethyl)-4-methoxybenzene (3.18 g, 20.3 mmol, Eq: 1) and N-ethyl-N-isopropylpropan-2- amine (5.24 g, 40.6 mmol, Eq: 2) were combined with acetonitrile (101 ml) to give a light yellow solution. Potassium iodide (1.68 g, 10.1 mmol, Eq: 0.5) was added. The mixture was heated to reflux for 2 hours. The mixture was cooled down and poured into water (50 mL) and extracted with EtOAc (3×50 mL), the combined extracts were washed with water (50 mL) and brine (50 mL), dried over anhydrous Na2S04, concentrate to afford the crude product. Purify the compound by column chromatography (hexanes/ EtOAc = 70/30) to afford the oil 1.1 g (20percent).

According to the analysis of related databases, 7343-33-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; DING, Qingjie; JIANG, Nan; WEIKERT, Robert James; WO2014/135472; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 81606-79-3, name is 2-(1,2,4-Triazol-1-yl)acetonitrile, A new synthetic method of this compound is introduced below., Quality Control of 2-(1,2,4-Triazol-1-yl)acetonitrile

Preparation 148 N-hydroxy-2-(1H-1,2,4-triazol-1-yl)ethanimidamide Method as for preparation 1 using 2-(1H-1,2,4-triazol-1-yl)acetonitrile (J.Org.Chem. USSR, 18; 2; 1982; 407) (2.16 g, 20 mmol) as starting material. The crystalline precipitate was filtered off and washed with cold MeOH and Et2O to afford the title compound (2.37 g)

The synthetic route of 81606-79-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Datta, Usa; US2002/151535; (2002); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-70-2, These common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[0752] Compound 1 (4 mg, 50 f.tmol) was dissolved inMeCN (1 mL) and dry 4N HCI in dioxane (0.5 mL). Themixture was stirred for 1 0 minutes and then concentratedunder reduced pressure to yield Compound 2, which wascarried to the next step without purification

The synthetic route of 16681-70-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 1001401-62-2, These common heterocyclic compound, 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of [6-(hexahydro-pyrrolo[3,4-c]pyrrol-2-yl)-2-trifluoromethyl-pyrimidin- 4-yl]-dimethyl-amine (50 mg, 0.17 mmol), 2-[1 ,2,3]triazol-2-yl-benzoic acid (34.5 mg, 0.18 mmol), HATU (94.6 mg, 0.25 mmol) and DIPEA (0.09 mL, 0.50 mmol) in DMF (4.0 mL) was stirred at room temperature for 30 minutes. The reaction mixture was diluted with ethyl acetate (60.0 mL) and washed with water (2 X 100 mL). The organic phase was dried (Na2SO4), filtered and concentrated to dryness. The crude product was purified using Agilent HPLC (Basic system) to yield pure title compound (34.0 mg, 43.4 %). MS (ESI) mass calcd. for C22H23F3N8O, 472.47; m/z found 473.2 [M+H]+ 1 H NMR (CDCI3): 7.98 (d, J = 8.1 , 1 H), 7.70-7.69 (m, 2H), 7.56-7.49 (m, 1 H), 7.45-7.37 (m, 2H), 5.20- 5.10 (m, 1 H), 3.90-3.66 (m, 4H), 3.60-3.28 (m, 4H), 3.08 (s, 6H), 3.02-2.89 (m, 2H).

Statistics shows that 2-(2H-1,2,3-Triazol-2-yl)benzoic acid is playing an increasingly important role. we look forward to future research findings about 1001401-62-2.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; CHAI, Wenying; LETAVIC, Michael, A.; LY, Kiev, S.; PIPPEL, Daniel, J.; RUDOLPH, Dale, A.; SAPPEY, Kathleen, C.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; SOYODE-JOHNSON, Akinola; STOCKING, Emily, M.; SWANSON, Devin, M.; WO2011/50198; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, A new synthetic method of this compound is introduced below., Quality Control of 4-[1,2,4]Triazol-1-yl-benzaldehyde

Step 1 (E)-3-(4-(1,2,4-Triazol-1-yl)phenyl)acrylic Acid 1.9 g of (E)-3-(4-(1,2,4-triazol-1-yl)phenyl)acrylic acid were prepared as described for (E)-3-(4-(methanesulfonyloxy)phenyl)acrylic acid, using 4-(1,2,4-triazol-1-yl)benzaldehyde instead of methanesulfonic acid 4-formylphenyl ester. 1H-NMR (DMSO-d6) delta 6.60 (d, 1 H); 7.65 (d, 1 H); 7.90 (AB, 4 H); 8.30 (s, 1 H); 9.40 (s, 1 H); 12.50 (br, 1 H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Peschke, Bernd; Pettersson, Ingrid; US2003/195190; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 6818-99-1, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 6818-99-1 as follows.

General procedure: 3,5-Dibromo-1,2,4-triazole (1; 658 mg, 2.9 mmol) or 3-chloro-1,2,4-triazole (300 mg, 2.9 mmol), o-quinone methide precursor 2 (2.9mmol), and K2CO3 (1.2 g, 8.7 mmol) were refluxed for 4 h in DMF (10mL). After completion of the reaction, the mixture was cooled, andpoured into H2O (30 mL). The precipitate formed was collected by filtration,washed with H2O, dried, and recrystallized.

According to the analysis of related databases, 6818-99-1, the application of this compound in the production field has become more and more popular.

Reference:
Article; Osipov, Dmitry V.; Osyanin, Vitaly A.; Voskressensky, Leonid G.; Klimochkin, Yuri N.; Synthesis; vol. 49; 10; (2017); p. 2286 – 2296;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics