Tag: M.W:100-200

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

[0861] lH-1,2,3-triazole-4-carboxylic acid (9.8 mg, 87f.tmol) and HATU (36.4 mg, 96 f.tmol) were combined in DMF(3.0 mL) and stirred at room temperature for 15 minutes.Compound 1 ( 40.3 mg, 87 fllllOI) and DIPEA ( 46 flL, 261f.tmol) were added and the resulting solution was stirred atroom temperature for 15 minutes, after which time LCMSindicated desired product formation. The solvent wasremoved in vacuo and the crude residue was purified byreverse phase chromatography to yield Compound a ( 5 .2 mg)as a TFA salt. MS m/z [M+Ht calc’d for C28H33CIFN50 4 ,558.22. found 558.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-[1,2,3]Triazole-4-carboxylic acid ,and how the biochemistry of the body works.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 64922-04-9, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 64922-04-9, name is Ethyl 1H-1,2,4-triazole-5-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation of Intermediate 1: 4-(3-Methanesulfonyloxymethyl-[l,2,4]triazol-l- yl)-piperidine-l-carboxylic acid tert-butyl esterStep 1: 4-(3-Methoxycarbonyl-[l,2,4]triazol-l-yl)-piperidine-l-carboxylic acid tert-butyl ester; To a solution of IH-[1, 2,4]triazole-3-carboxylic acid ethyl ester (1.05 g, 8.23 mmol) in dimethylformamide (50 rnL) was added sodium hydride (60%, 0.395 g, 9.88 mmol). The solution was stirred at room temperature for 20 minutes followed by 1 hour at 70 0C. 4-methanesulfonyloxy-piperidine-l-carboxylic acid tert-butyl ester (2.3 g, 8.23 mmol) was then added in a single portion and heated at 70 0C for 40 hours. The solution was cooled to 0 0C and the salt precipitate was removed by filtration. The filtrate was diluted with dichloromethane and washed with water, brine, dried over sodium sulfate, filtered and concentrated in vacuo. The residue was purified by flash chromatograph on silica gel with Hexanes and EtOAc to afford the desired product. 1H NMR (CDCl3): 5 8.18 (IH, s), 4.40 (IH, m), 4.22 (2H, m), 3.96 (3H, s), 2.82 (2H, m), 2.12 (2H, m), 1.94 (2H, m), 1.41 (9H, s).

In the meantime we’ve collected together some recent articles in this area about 64922-04-9 to whet your appetite. Happy reading!

Reference:
Patent; METABOLEX, INC.; WO2009/14910; (2009); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7343-33-1, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, molecular formula is C2H2BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

3-bromo-1H-1,2,4-triazole (32.1 mg, 0.217 mmol) and BF3OEt2 (54 mul, 0.426 mmol) were added to a stirred solution of Intermediate 6 (26.0 mg, 0.043 mmol) in 1,2- dichloroethane (0.43 ml). The reaction mixture was a light yellow solution that was heated to 50°C. After 1.75 hr, LCMS and 1H NMR showed complete consumption of Intermediate 6. The reaction mixture was cooled to room temperature, the solvent was evaporated, and the resulting residue was placed under high vacuum. The residue was dissolved in methanol and separated using a single HPLC run on a 19 x 150 mm Sunfire Prep C18 OBD 10 mum column by eluting with acetonitrile/water + 0.1percent TFA. The HPLC fractions containing the fastest eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6A (3.6 mg) as a white solid. The HPLC fractions containing the second eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6B (13.1 mg) as a white solid. The HPLC fractions containing the slowest eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6C (5.8 mg) as a white solid.EXAMPLE 6A:1H NMR (CD3OD, 600 MHz, ppm) delta 0.76 (s, 3H, Me), 0.76 (d, 3H, Me), 0.81 (d, 3H, Me), 0.84 (d, 3H, Me), 0.85 (d, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 0.94 (s, 3H, Me), 1.16 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.35 (m), 1.40-1.44 (m), 1.46-1.65 (m), 1.73-1.96 (m), 2.11-2.22 (m), 2.43 (broad dd, 1H, H13), 2.79 (broad d, 1H), 2.84 (s, 1H, H7), 3.49 (d, 1H), 3.53 (d, 2H), 3.60 (d, 1H), 3.73 (broad d, 1H), 3.94 (d, 1H), 5.50 (dd, 1H, H5), 5.72-5.80 (broad m, 1H, H14), 9.29 (broad s, 1H, triazole). Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).EXAMPLE 6B:1H NMR (CD3OD, 600 MHz, ppm) delta 0.75 (s, 3H, Me), 0.76 (d, 3H, Me), 0.79 (d, 3H, Me), 0.83 (d, 3H, Me), 0.84 (d, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 0.91 (s, 3H, Me), 1.13 (s, 3H, Me), 1.19 (s, 3H, Me), 1.22-1.34 (m), 1.39-1.43 (m), 1.46-1.56 (m), 1.58-1.64 (m), 1.72-1.95 (m), 2.09-2.21 (m), 2.30 (dd, 1H, H13), 2.83 (s, 1H, H7), 2.85 (d, 1H), 3.48 (d, 1H), 3.48 (d, 1H), 3.54 (dd, 1H), 3.60 (d, 1H), 3.88 (d, 1H), 3.95 (d, 1H), 5.47 (dd, 1H, H5), 5.71-5.77 (m, 1H, H14), 8.10 (s, 1H, triazole).Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).EXAMPLE 6C:1H NMR (CD3OD, 600 MHz, ppm) delta 0.76 (s, 3H, Me), 0.77 (d, 3H, Me), 0.82 (d, 3H, Me), 0.85 (d, 3H, Me), 0.86 (s, 3H, Me), 0.86 (d, 3H, Me), 0.89 (d, 3H, Me), 0.92 (s, 3H, Me), 1.16 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.34 (m), 1.39-1.44 (m), 1.48-1.65 (m), 1.76-1.96 (m), 2.11-2.22 (m), 2.41 (dd, 1H, H13), 2.72 (d, 1H), 2.84 (s, 1H, H7), 3.47 (d, 1H), 3.50 (d, 1H), 3.52 (dd, 1H), 3.58 (d, 1H), 3.72 (d, 1H), 3.91 (d, 1H), 5.48 (dd, 1H, H5), 5.51-5.57 (m, 1H, H 14), 8.52 (s, 1H, triazole).Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).

I am very proud of our efforts over the past few months and hope to 5-Bromo-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SCYNEXIS, INC.; GREENLEE, Mark, L.; WILKENING, Robert; APGAR, James; SPERBECK, Donald; WILDONGER, Kenneth, James; MENG, Dongfang; PARKER, Dann, L.; PACOFSKY, Gregory, James; HEASLEY, Brian, Haid; MAMAI, Ahmed; NELSON, Kingsley; WO2010/19204; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 13273-53-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 13273-53-5, name is 4-Bromo-1-methyl-1H-1,2,3-triazole, molecular formula is C3H4BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a mixture of 2-morpholino-N-(6-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)isoquinolin-3-yl)acetamide (LXV) (675.4 mg, 1.7 mmol), 4-bromo-1-methyl-1H-1,2,3-triazole (LXVI) (0.55 g, 3.4 mmol) and SPhos Pd G4 (135 mg, 0.17 mmol) in dioxane (10 mL) was added 2 N aqueous K3PO4 (1.7 mL, 3.4 mmol). N2 gas was bubbled into the mixture for 10 min and then heated to 90 C. for 24 h. The reaction mixture was partitioned between EtOAc and aqueous saturated NaHCO3. Insoluble solids were removed by filtration and the organic layer separated and washed with water and brine. The organic layer was separated, dried (MgSO4) and concentration to dryness under vacuum. The crude was then combined with the insoluble solid, dissolved in a mixture of chloroform/MeOH, absorbed on silica gel and was purified by column chromatography (0%?70% CHCl3/10% 7N NH3 MeOH in CHCl3) to give N-(6-(1-Methyl-1H-1,2,3-triazol-4-yl)isoquinolin-3-yl)-2-morpholinoacetamide 11 as a brown solid (170.0 mg, 0.482 mmol, 28.4% yield). 1H NMR (499 MHz, DMSO-d6) delta ppm 2.55-2.61 (4H, m), 3.25 (2H, s), 3.63-3.69 (4H, m), 4.14 (3H, s), 8.04 (1H, dd, J=8.51, 1.65 Hz), 8.13 (1H, d, J=8.78 Hz), 8.33 (1H, s), 8.50 (1H, s), 8.74 (1H, s), 9.13 (1H, s), 10.07 (1H, s); ESIMS found for C18H20N6O2 m/z 353.2 (M+1).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 4-Bromo-1-methyl-1H-1,2,3-triazole is helpful to your research.

Reference:
Patent; Samumed, LLC; KC, Sunil Kumar; Mittapalli, Gopi Kumar; Chiruta, Chandramouli; Hofilena, Brian Joseph; Mak, Chi Ching; Eastman, Brian Walter; Bollu, Venkataiah; (158 pag.)US2019/119263; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C9H9N3O

General procedure: A 10mL microwave tube was loaded with6a(1.4mmol), paraformaldehyde (4mmol), the appropriate alcohol (4.5mmol) and were irradiated for 20min. The internal temperature reached 150C. The alcohol excess was evaporated under reduced pressure. The residual solid product was purified by column chromatography on silica gel and eluted with an increasing polarity gradient mixture of hexane and ethyl acetate (9/1). For the product 7e was used 5mL of chloroform as solvent.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, in my other articles.

Reference:
Article; Jordao, Alessandro K.; Novais, Juliana; Leal, Bruno; Escobar, Ana C.; Dos Santos Junior, Helvecio M.; Castro, Helena C.; Ferreira, Vitor F.; European Journal of Medicinal Chemistry; vol. 63; (2013); p. 196 – 201;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 4314-22-1, name is 2-(1H-1,2,3-Triazol-1-yl)acetic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C4H5N3O2

In a manner analogous to that described in Example 8 from (E)-2(R)-[1(S)-(benzyloxycarbamoyl)-4-phenyl-3-butenyl]-4-methyl-2′-(2(S)-methylbutyl)valerohydrazide and using 1,2,3-triazole-1-acetic acid in place of N-tert-butoxycarbonyl-beta-alanine there was obtained (E)-2(R)-[1(S)-(benzyloxycarbamoyl)-4-phenyl-3-butenyl]-4-methyl-2′-(2(S)-methylbutyl)-2′-[2-(1H-1,2,3-triazol-1-yl)acetyl]valerohydrazide in the form of a gum. MS: 589 (M+H)+.

If you are hungry for even more, make sure to check my other article about 4314-22-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Hoffmann-La Roche Inc.; US6239151; (2001); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 3641-13-2, name is 5-Amino-4H-1,2,4-triazole-3-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 5-Amino-4H-1,2,4-triazole-3-carboxylic acid

General procedure: A mixture of benzil (0.01 mol), aldehydes (0.01 mol), 3-amino-1,2,4-triazole-5-carboxylic acid (0.01 mol), ammonium acetate (0.01 mol) and ceric ammonium nitrate (15 mol%) as a catalyst were refluxed in ethanol (15 mL) for about 3-4 h. The progress of the reaction was monitored by TLC. After completion of reaction, the mixture was cooled to room temperature. The solid formed was filtered and dried. The crude products were recrystallized by ethanol.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 3641-13-2

Reference:
Article; Nikalje, Anna Pratima G.; Ghodke, Mangesh S.; Kalam Khan, Firoz A.; Sangshetti, Jaiprakash N.; Chinese Chemical Letters; vol. 26; 1; (2015); p. 108 – 112;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-70-2, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a mixture of (E)-3-(4-chloro-2-((5-methyl-2 H-tetrazol-2-yl)methyl)phenyl)- 1 -(4-(pi peridi n-4- yl)piperazin-i-yl)prop-2-en-i-one, dihydrochloride salt (Example 149, step 2)(130 mg, 0.259 mmol), DIPEA (0.316 ml, 1.810 mmol) and 1H-i ,2,3-triazole-4-carboxylic acid (38.0 mg, 0.336 mmol) in DMF (1.5 ml) was added T3P, 50% solution in EtOAc (0.302 ml, 0.517mmol). The resultant mixture was stirred at room temperature over the weekend. Water (0.5 ml) was added and the solvent removed in vacuo. The residue was purified by reverse phase preparative HPLC to afford the title compound as the trifluoroacetate salt;LC-MS: Rt 0.87 mins; MS mlz 525.3 (M+H)+; Method 2minLowpHvo2

In the meantime we’ve collected together some recent articles in this area about 1H-[1,2,3]Triazole-4-carboxylic acid to whet your appetite. Happy reading!

Reference:
Patent; NOVARTIS AG; BEATTIE, David; BAETTIG, Urs; LEGRAND, Darren Mark; LISTER, Andrew Stuart; MCKENNA, Jeffrey; PEARCE, David William; SANDHAM, David Andrew; STEWARD, Oliver Ross; THOMSON, Christopher; WO2015/8230; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 27996-86-7, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, molecular formula is C9H7N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: To a glass vessel suitable for sealing with Teflon cap (for microwave vials) were added 1-(chloromethyl)-4,5-dimethoxy-2-nitrobenzene (1 equiv.) [34] and benzaldehyde derivative (3 equiv.) The vessel was capped and then evacuated and backfilled with N2 (thrice-repeated process). Anhydrous DMF (3.5mL/mmol) was introduced and the solution was vigorously stirred for 20minat-20C. TDAE (1.06 equiv.) was added slowly and the mixture was stirred for one hour. Then, the reaction was stirred at room temperature overnight. After LC-MS analysis clearly showed that the chloride had been totally consumed, the reaction was hydrolyzed with water. The mixture was then extracted with ethyl acetate. The combined organic layers were washed with water and brine, dried over Na2SO4, filtered off, and concentrated under reduced pressure to afford the corresponding crude product.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 4-[1,2,4]Triazol-1-yl-benzaldehyde is helpful to your research.

Reference:
Article; Da Costa, Laurene; Scheers, Els; Coluccia, Antonio; Rosetti, Alessia; Roche, Manon; Neyts, Johan; Terme, Thierry; Cirilli, Roberto; Mirabelli, Carmen; Silvestri, Romano; Vanelle, Patrice; European Journal of Medicinal Chemistry; vol. 140; (2017); p. 528 – 541;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 16681-70-2, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

[0427] To a stirred solution of (2S,4S)-4-amino-5-bipheny1-4-y 1-2-(3 -hydroxypropoxymethy l)pentanoic acid ethy Iester (18 mg, 47 flillOI) in DMF (0.3 mL), was added IH-1,2,3-triazole-4-carboxylic acid (5.3 mg, 47 f.tmol) and HATU (18mg, 47 f.tmol), followed by DIPEA(25 f.LL, 141 f.tmol). Themixture was stirred for 30 minutes, then concentrated underreduced pressure to yield crude Compound I, which was usedin the next step without purification.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 16681-70-2, Happy reading!

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics