Tag: M.W:100-200

Electric Literature of 15988-11-1, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Dimedone (0.14 g, 1 mmol), benzaldehyde (0.1 g, 1 mmol), and 4-phenylurazole (0.177 g, 1 mmol) were mixed with PEG-SO3H (0.6 g, 0.1 mmol) and the obtained mixture was stirred magnetically at 80 C for 40 min. After the completion of the reaction warm water (20 mL) was added and the mixture stirred for about 5 min. The insoluble crude product was filtered and recrystallized from EtOH/H2O 4:1 and the pure product was obtained (0.352 g, 91%). In order to recover the catalyst, the filtrate was dried under reduced pressure and recovered catalyst was washed with diethyl ether and reused after drying under reduced pressure. The equivalent procedure was used for the synthesis of triazolo[1,2-a]indazole-tetraones.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 4-Phenyl-1,2,4-triazolidine-3,5-dione.

Reference:
Article; Hasaninejad, Alireza; Zare, Abdolkarim; Shekouhy, Mohsen; Tetrahedron; vol. 67; 2; (2011); p. 390 – 400;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 1H-[1,2,3]Triazole-4-carboxylic acid

[0833] lH-1,2,3-triazole-4-carboxylic acid (3.8 mg, 34f.tmol)was combined withHATU (12.9 mg, 34 flillOI) inDMF(2 mL) and stirred at room temperature for 15 minutes. Compound3(60mg, 137 f.tmol)andDIPEA(l6f.LL, 92f.tmol)werethen added. The solution was stirred at room temperature for15 minutes, at which time LCMS showed reaction completion.The solvent was removed in vacuo and the crude residuewas purified by reverse phase chromatography to yield Compoundb (18.5 mg) as a TFA salt. MS m/z [M+Hr calc’d forC26H31CIFN50 4 , 532.21. found 532.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 16681-70-2.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

[0674] Compound 10 (32 mg, 75 fllllOl, 1.0 eq.) was dissolvedinDMF(500 f.LL). lH-1,2,3-triazole-4-carboxylic acid(25 mg, 221 f.tmol, 3.0 eq.) was dissolved in DMF (500 f.LL),followed by the additionofDIPEA (51 f.LL, 297 f.tmol, 4.0 eq.)and HATU ( 42 mg, 111 f.tmol, 1.5 eq.). The solutions werestirred at room temperature for 20 minutes, then combinedand stirred at room temperature for an additional 20 minutesand when the reaction was complete (as determined byLC/MS analysis), the mixture was diluted with water (0.5mL), the pH adjusted to 4 with 10% citric acid, then washedwith EtOAc (2×20 mL). The aqueous phase was discardedand the combined organics were extracted with saturatedaqueous NaCl (10 mL). The aqueous phase was discarded andthe organic phase was dried over Na2S04 , filtered, and concentratedin vacuo, and purified by preparative HPLC to yieldthe title compound (11 mg; purity 99.6% ). LCMS (ESI): calc.C27H31N50 4=489; obs. M+H=490.2. Retention time: 4.23mm.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 16681-70-2.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 5-Bromo-1H-1,2,4-triazole

To a 100 mL round bottomed flask, equipped with a stir bar, was added copper(I) iodide (0.397 g, 2.08 mmol), 3-bromo-1H-1,2,4-triazole (4.62 g, 31.2 mmol), and cesium carbonate (6.79 g, 20.83 mmol), as solids. These solids were diluted with anhydrous dimethyl sulfoxide (34.7 mL). Then 1-iodo-4-(trifluoromethoxy)benzene (1.65 mL, 10.4 mmol) was added as a liquid. The flask was placed under nitrogen atmosphere, and the suspension was heated to an internal temperature of 100° C. for 20 hours. The reaction mixture was allowed to cool to room temperature and filtered through a pad of Celite®, washing with excess ethyl acetate (200 mL). The filtrate was poured into a brine solution (200 mL), and the layers were partitioned. The aqueous phase was extracted with additional ethyl acetate (2*100 mL). The combined organic layers were dried over anhydrous magnesium sulfate, filtered, and concentrated. The resulting residue was purified via flash column chromatography using 10-50percent ethyl acetate/hexanes as eluent to afford the title compound as a white solid (1.80 g, 54percent): 1H NMR (400 MHz, DMSO-d6) delta 9.35 (s, 1H), 7.97 (d, J=8.9 Hz, 2H), 7.60 (d, J=8.4 Hz, 2H); 19F NMR (376 MHz, DMSO-d6) delta -57.06; ESIMS m/z 308, 310 ([M+H]+).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 5-Bromo-1H-1,2,4-triazole, in my other articles.

Reference:
Patent; DOW AGROSCIENCES LLC; Fischer, Lindsey G.; Baum, Erich W.; Crouse, Gary D.; DeAmicis, Carl; Lorsbach, Beth; Petkus, Jeff; Sparks, Thomas C.; Whiteker, Gregory T.; US2014/274688; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C8H8N4

A mixture of formamidine from Step 1 (300 mg) and 4-triazolyl-aniline (167 mg, 1 eq) in AcOH (3 ml) was heated to 80 for 2 h. Cooled, and the resulting solid was isolated by filtration, washed with sodium bicarbonate, water and MeCN. The solid was purified by column chromatography on silica gel with DCM:EtOH:NH3 (400:8:1 to 200:8:1) as eluant to give the title compound.1H NMR delta 10.36 (IH, br s), 9.29 (IH, s), 8.93 (IH, s), 8.63 (IH, s), 8.25 (2H, m), 8.03 (3H, m), 7.86 (2H, d, J 9.25Hz), 7.81 (3H, m); LC-MS rt 2.61 m/z 418 ES+.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 4-(1,2,4-Triazol-1-yl)aniline ,and how the biochemistry of the body works.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-70-2, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 41 (S)-N-(2-(2-cyanopyrrolidine-1-yl)-2-oxoethyl)-1H-1,2,3-triazole-5-carboxamide 1H-1,2,3-triazole-4-carboxylic acid (0.092 g, 0.814 mmol) was dispersed in dry dioxane (3 mL) in a round bottom flask with nitrogen. To this 1-chloro-N,N,2-trimethylprop-1-en-1-amine (0.151 ml, 1.139 mmol) was added and the reaction was stirred for 30 minutes at room temperature. The starting material dissolves over time. Then (S)-1-(2-aminoacetyl)pyrrolidine-2-carbonitrile hydrochloride (0.247 g, 1.302 mmol) with N-ethyl-N-isopropylpropan-2-amine (0.307 ml, 1.709 mmol) was added and the mixture was stirred for 2 h, evaporated to dryness and redissolved in ethyl acetate. Followed by washing with 0.1N citric acid and saturated sodium bicarbonate and brine. After drying over sodium sulfate, filtration and evaporation, the product was purified using column chromatography. Yield: 34 mg, 40% 1H NMR (400 MHz, DMSO) (9/1 mixture of trans/cis amide rotamers) delta 15.53 (s, 1H), 8.58-8.44 (s, 1H), 8.39 (s, 1H), 5.28-5.22 (m, 0.1H), 4.77 (dd, J=3.76, 7.32 Hz, 1H), 4.30 (dd, J=5.61, 16.77 Hz, 0.2H), 4.10 (d, J=5.76 Hz, 2H), 3.68 (ddd, J=4.04, 7.68, 9.39 Hz, 1H), 3.50 (td, J=6.84, 9.09 Hz, 1H), 2.31-1.88 (m, 4H). UPLC I (ESI) Rt 0.72 min, m/z 249.6 [M+H]+ (96%); LC-MS (I-B) Rt 4.0 min, m/z 249.0 [M+H]+ (96%)

In the meantime we’ve collected together some recent articles in this area about 16681-70-2 to whet your appetite. Happy reading!

Reference:
Patent; Fox Chase Cancer Center; Jansen, Koen; De Meester, Ingrid; Heirbaut, Leen; Cheng, Jonathan D.; Joossens, Jurgen; Augustyns, Koen; Van Der Veken, Pieter; US2014/357650; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-70-2, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

B. (2S,4R)-5-Biphenyl-4-yl-2-hydroxymethyl-2-methyl-4-[(3H-[1,2,3]triazole-4-carbonyl)-amino]-pentanoic acid ethyl ester (R4=H; R7=-CH2CH3) 1,2,3-Triazole-4-carboxylic acid (11.5 mg, 102 nmol, 1.2 eq.) and HATU (38.6 mg, 102 nmol, 1.2 eq.) were dissolved in DMF (0.9 mL) and stirred at room temperature for 5 minutes. DIPEA (29.5 muL, 2.0 eq.) was added to yield the activated acid. (2S,4R)-5-Biphenyl-4-yl-4-t-butoxycarbonylamino-2-hydroxymethyl-2-methyl-pentanoic acid (35 mg, 85 mumol, 1.0 eq.) was dissolved in EtOH and 4 M of HCl in dioxane (423 muL) was added. The mixture was heated to 60 C. overnight, then concentrated to dryness and purified by reverse phase chromatography (5-60% MeCN in water over 18 minutes. The clean fractions were combined and dried under vacuum to dryness, then combined with the activated acid. After 20 minutes, the reaction was quenched with water and the product was dried under vacuum and purified by preparative HPLC to yield the title compound (4 mg, >95% purity. MS m/z [M+H]+ calc’d for C24H28N4O4, 437.21. found 437.3.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-[1,2,3]Triazole-4-carboxylic acid.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 3641-13-2, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 3641-13-2, name is 5-Amino-4H-1,2,4-triazole-3-carboxylic acid, molecular formula is C3H4N4O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A mixture of benzil (0.01 mol), aldehydes (0.01 mol), 3-amino-1,2,4-triazole-5-carboxylic acid (0.01 mol), ammonium acetate (0.01 mol) and ceric ammonium nitrate (15 mol%) as a catalyst were refluxed in ethanol (15 mL) for about 3-4 h. The progress of the reaction was monitored by TLC. After completion of reaction, the mixture was cooled to room temperature. The solid formed was filtered and dried. The crude products were recrystallized by ethanol.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 5-Amino-4H-1,2,4-triazole-3-carboxylic acid is helpful to your research.

Reference:
Article; Nikalje, Anna Pratima G.; Ghodke, Mangesh S.; Kalam Khan, Firoz A.; Sangshetti, Jaiprakash N.; Chinese Chemical Letters; vol. 26; 1; (2015); p. 108 – 112;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 4928-88-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 4928-88-5, name is Methyl 1H-1,2,4-triazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 1 1-(d,l-Tetrahydropyran-2-yl)-1,2,4-triazole-3-carboxamide A mixture of methyl 1,2,4-triazole-3-carboxylate (12.7 g, 0.10 mole), 2,3-dihydropyran (16 ml), bis(p-nitrophenyl) phosphate (0.10 g) and anhydrous dimethylformamide (100 ml) was heated at 75°-80° for 3 hrs. Additional 2,3-dihydropyran (8 ml) was added and heating at 75°-80° was continued for 3 hrs. The solvent was removed in vacuo and the residue was dissolved in ethyl acetate (150 ml). The ethyl acetate solution was washed with aqueous sodium hydrogen carbonate (two 25 ml portions) and water. The solution was dried over magnesium sulfate, filtered and the filtrate was evaporated to dryness. The crude product, methyl 1-(d,l-tetrahydropyran-2-yl)-1,2,4-triazole-3-carboxylate, was treated for 20 hrs at 25° with methanol saturated with anhydrous ammonia. The solvent was removed in vacuo and the product was crystallized from ethanol to provide 14.0 g (71percent). Recrystallization from ethanol afforded 11.7 g (60percent) of pure 1-(d,l-tetrahydropyran-2 -yl)-1,2,4-triazole-3-carboxamide with mp 156°-158°. NMR (DMSO-d6) delta 8.82 (S, 1, H-5). Anal. Calcd for C8 H12 N4 O2: C, 48.97; H, 6.17; N, 28.56. Found: C, 48.95; H, 6.22; N, 28.42.

I am very proud of our efforts over the past few months and hope to Methyl 1H-1,2,4-triazole-3-carboxylate help many people in the next few years.

Reference:
Patent; ICN Pharmaceuticals, Inc.; US3991078; (1976); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16227-12-6, name is 4-Phenyl-4H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

EXAMPLE 125 4-phenyl-1-(ethyl)triazolium bromide 0.15 g (0.001 mol) 4-phenyltriazole 1 and 0.22 ml (0.32 g, 0.003 mol) 1-bromoethane 2 are combined in a pressure tube. The mixture is stirred 12 h at 110 C. Subsequently, it is cooled down to room temperature. The precipitated solid is taken up in a 1:1 mixture of THF and petroleum ether, is filtered off, and washed with diethylether. M 254.13 C10H12N3Br Yield: 0.2307 g (97%) 1H-NMR DM-226 (300 MHz/DMSO): (ppm)=1.57 (t, 3H, 8-H); 4.49 (q, 2H, 7-H); 7.71 (m, 3H, 5/5’/6H); 7.87 (d, 2H, 4/4′-H); 9.82, (s, 1H, 2-H); 10.88 (s, 1H, 1-H) 13C-NMR DM-226 (75.475 MHz/DMSO):

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 4-Phenyl-4H-1,2,4-triazole, in my other articles.

Reference:
Patent; TECHNISCHE UNIVERSITAET DRESDEN; US2011/105761; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics