Tag: M.W:100-200

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

300 mg of Intermediate 4, 133 mg of potassium carbonate,And 3 mL of DMF was added 132 mg of 3-bromo-1 H-1,2,4-triazole under ice cooling.After stirring for 2.5 hours under ice cooling,Saturated multilayer aqueous solution was added to the reaction mixture,And extracted with ethyl acetate. The organic layer was washed with water,And washed with saturated brine,And dried over anhydrous sodium sulfate.The obtained organic layer was dried under reduced pressure.The obtained residue was subjected to silica gel chromatography,370 mg of the present compound 12 described below was obtained.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 5-Bromo-1H-1,2,4-triazole, in my other articles.

Reference:
Patent; Sumitomo Chemical; Ikari, Kaori; (123 pag.)JP2019/6686; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-70-2, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

[0394] (2S,4S)-4-Amino-5-biphenyl-4-yl-2-methoxymethylpentanoicacid ethyl ester (16 mg, 47 fllllOI) was dissolvedin DMF (0.3 mL). 1H-1,2,3-Triazole-4-carboxylicacid (5.3 mg, 47 f.tmol) and HATU (18 mg, 47 f.tmol) wereadded followed by DIPEA (25 f.LL, 141 fllllOI). The mixturewas stirred for 30 minutes and concentrated under reducedpressure to yield Compound 1, which was used in the nextstep without purification.

I am very proud of our efforts over the past few months and hope to 1H-[1,2,3]Triazole-4-carboxylic acid help many people in the next few years.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 3641-08-5, name is 2H-1,2,4-Triazole-3-carboxamide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 3641-08-5

A stirred mixture of 1H-1,2,4-triazole-3-carboxamide (500 mg, 4.46 mmol) in 1,2-dichloroethane (4.46 mL) treated at room temperature with 2,6-lutidine (2.08 mL, 17.84 mmol) and triethylsilyl trifluoromethanesulfonate (3.03 mL, 13.38 mmol) and heated under a nitrogen atmosphere at 50C. After 4 hours of heating the reaction solution allowed to cool to room temperature and diluted with dichloromethane (25 mL), washed with water (25 mL), 0.5M hydrochloric acid (25 mL), water (25 mL), dried over MgSO4, filtered, and evaporated to solid. The solid was flash chromatographed (silica gel, 10-65% ethyl acetate:hexane) to give the product as a white solid (683 mg).1H NMR (CDCl3, 500MHz, ppm) 0.89 (q, J=8Hz, 6H, CH2), 1.03 (t, J=8 Hz, 9H, CH3), 6.77 (s, 1H, NH), 8.63 (s, 1H, triazole H-5).LC/MS m/z (positive ion scan) M+l= 227.20.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 3641-08-5.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SCYNEXIS, INC.; GREENLEE, Mark, L.; WILKENING, Robert; APGAR, James; SPERBECK, Donald; WILDONGER, Kenneth, James; MENG, Dongfang; PARKER, Dann, L.; PACOFSKY, Gregory, James; HEASLEY, Brian, Haid; MAMAI, Ahmed; NELSON, Kingsley; WO2010/19204; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 3641-08-5, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 3641-08-5, name is 2H-1,2,4-Triazole-3-carboxamide, molecular formula is C3H4N4O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

EXAMPLE I Preparation of 1(and 2 and 4)-Acetyl-s-triazole-3-carboxamide A mixture of 0.2 g. of 1,2,4-triazole-3-carboxamide and 0.5 ml. of acetic anhydride is heated on an oil bath at a temperature of 150 C. for 20 minutes. The wet solid mass is triturated with diethyl ether and collected and washed with diethyl ether yielding 0.2 g. of colorless solid. This solid is recrystallized from acetonitrile giving a colorless solid, m.p. 212-215 C. (dec).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 2H-1,2,4-Triazole-3-carboxamide, hurry up and to see.

Reference:
Patent; American Cyanamid Company; US4006159; (1977); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 27996-86-7, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, molecular formula is C9H7N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The intermediate products, 4-(1H-1,2,4-triazol-1-yl)benzaldehyde (TABA), were prepared from 1,2,4-triazole and 4-fluorobenzaldehyde as literature reported. The mixture of TABA (2.424 g, 14 mmol) and 3,4-diaminobenzoic acid (2.890 g, 19 mmol) in 25 mL toluene was refluxed for 4 h at 110 C, then cooled to 5 C and kept on stirring for 15 min, dark yellow precipitate was collected and washed with ice-cold toluene and diethyl ether. The golden yellow microcrystal L1 ligand can be obtained by refluxing the previous precipitate in 70 mL MeOH at 50 C for 10 min (yield: 2.014 g, 46.8%). Elemental analysis: Calc. for C16H13N5O2: C, 62.53; H, 4.26; N, 22.79. Found: C, 62.59; H, 4.30; N, 22.71%. IR (KBr) numax = 3456, 3338, 3152, 2926, 2900, 2800, 2625, 2586, 2555, 2517, 2025, 1680, 1605, 1524, 1410, 1296, 1267, 1210, 1148, 968, 872, 829, 768, 669, 522, 420 cm-1.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 27996-86-7.

Reference:
Article; Ou, Yong-Cong; Chen, Han-Cheng; Liang, Yuan-Hao; Tang, Jun-Jie; Feng, Shao-Bin; Peng, Liang; Wu, Jian-Zhong; Inorganica Chimica Acta; vol. 435; (2015); p. 215 – 222;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 5-Bromo-1H-1,2,4-triazole

To a 250 mL reaction flask was added 3-bromo-1H-1,2,4-triazole (5 g, 33.8 mmol), CuI (0.644 g, 3.38 mmol) and Cs2CO3 (11.01 g, 33.8 mmol). The flask was evacuated/backfilled with nitrogen gas, and then DMSO (33.8 ml) and 1-iodo-4-(trifluoromethoxy)benzene (4.87 g, 16.90 mmol) were added. The reaction mixture was heated to 100° C. for 20 hours (h). The reaction was cooled to room temperature (RT), diluted with EtOAc and filtered through a plug of Celite®. The Celite® was further washed with EtOAc. Water was added to the combined organics, and the layers were separated. The aqueous phase was neutralized to pH 7, and further extracted with EtOAc. The combined organics were concentrated in vacuo. Purification via flash chromatography (silica/EtOAc/hexanes) yielded 3-bromo-1-(4-(trifluoromethoxy)phenyl)-1H-1,2,4-triazole as an off-white solid (3.78 g, 12.27 mmol, 72.6percent): mp 69-70° C.; 1H NMR (400 MHz, CDCl3) delta 8.44 (s, 1H), 7.70 (d, J=8.9 Hz, 2H), 7.38 (d, J=8.5 Hz, 2H); 19F NMR (376 MHz, CDCl3) delta ?58.04; EIMS m/z 307.

If you are hungry for even more, make sure to check my other article about 7343-33-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dow AgroSciences LLC; GIAMPIETRO, Natalie C.; CROUSE, Gary D.; WHITEKER, Gregory T.; US2014/275563; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-70-2, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

3H-l,2,3-triazole-4-carboxylic acid (3.4 mg, 30 muiotaetaomicron) was combined with HATU (1 1 mg, 30 muiotaetaomicron) in DMF (0.3 mL) and stirred at room temperature for 10 minutes; (1407) DIPEA (1 eq.) was added and the mixture was stirred for 1 minute. Compound 2 (10 mg, 30 muiotaetaomicron) in DMF (0.5 mL) was combined with DIPEA (5.2 muEpsilon, 30 muiotaetaomicron), then added to the activated acid solution. The resulting solution was stirred at room temperature for 30 minutes; LC/MS showed the mass of the desired product. The solvent was removed in vacuo and the crude residue was purified by reverse phase chromatography to yield Compound a (6.1 mg) as a TFA salt. MS m/z [M+H]+ calc’d for C27H31CIFN5O4, 544.21 ; found 545.2.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-[1,2,3]Triazole-4-carboxylic acid.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 6818-99-1, name is 3-Chloro-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 6818-99-1

2- [6-Chloro-3- (ethanesulfonyl) pyridin-2-yl] -3-methyl-6- (pentafluoroethyl)-3H-imidazo [4,5-b] 300mg, sodium hydride (60 %, in a mixture of oil) 45mg and DMF 1.3mL, was added under ice-cooling 3-chloro-1H-1,2,4-triazole 116mg. The reaction mixture was stirred under ice cooling for 20 hours, water was added to the reaction mixture, followed by extraction with ethyl acetate. The resulting organic layer was dried over anhydrous sodium sulfate, and then dried under reduced pressure. The resulting residue was subjected to silica gel chromatography, the compounds of the present invention beta33 referred to below was obtained 240mg.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 3-Chloro-1,2,4-triazole help many people in the next few years.

Reference:
Patent; SUMITOMO CHEMICAL COMPANY LIMITED; NAKAJIMA, YUJI; OKAWARA, YUICHI; (263 pag.)JP2016/102104; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1001401-62-2, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, molecular formula is C9H7N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A mixture of 2-(2H-l,2,3-triazol-2-yl)benzoic acid (100 mg, 0.528 mmol) in SOCl2 (251.5 mg, 2.11 mmol) was stirred at RT for 0.5 h, then concentrated in vacuo. To a solution of the product from Step 3 (110 mg, 0.48 mmol) and Et3N (145.7 mg, 1.44 mmol) in DCM (1 mL) at 0 C was added a solution of the above residue in DCM (1 mL) dropwise. The resulting mixture was stirred at 0 C for 2 h, then quenched with water (1 mL) and extracted with DCM (2 mL x 3). The combined organic layers were washed with brine (2 mL), dried over Na2SC>4, filtered, and concentrated in vacuo. The residue was purified by prep-TLC (50% EtOAc in petroleum ether) to give the title compound as a oil. LRMS m/z (Mu+Eta) 400.0, 402.0 found, 400.1, 402.1 required.

This is the end of this tutorial post, and I hope it has helped your research about 1001401-62-2!

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; LIVERTON, Nigel; LUO, Yunfu; (85 pag.)WO2016/100156; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 81606-79-3, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 81606-79-3, name is 2-(1,2,4-Triazol-1-yl)acetonitrile, molecular formula is C4H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To the solution of 3-[2-[tert-butyl(dimethyl)silyl]oxyethyl]benzaldehyde (1223. OOmg, 4.62mmol) , Toluene (2.5mL), Triethylamine (L95mL, l3.87mmol) was added 2-(lH- l,2,4-Triazol-l-yl)acetonitrile (874.9lmg, 8.09mmol) . The resulted mixture was microwaved at 150 degrees for 3 h. LCMS was shown some product and still had some remained starting material. The reaction mixture was worked up with water (50 mL) and DCM (50 mL x 2). The organic layer was brined and dried with MgS04. The concentrated crude was purified by prep HPLC Shimadzu to obtain 3-[3-[2- [tert-butyl(dimethyl)silyl] oxycthy I ] phenyl ] -2-( 1 ,2,4-triazol- 1 -yl)prop-2-enenitrile ( 120.00mg) with 7.3 % yield. LC-MS m/z: 355[M+l]

In the meantime we’ve collected together some recent articles in this area about 81606-79-3 to whet your appetite. Happy reading!

Reference:
Patent; PRINCIPIA BIOPHARMA INC.; LOU, Yan; OWENS, Timothy Duncan; BRAMELD, Kenneth Albert; GOLDSTEIN, David Michael; (171 pag.)WO2019/99576; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics