Tag: M.W:100-200

Adding a certain compound to certain chemical reactions, such as: 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4928-87-4, 4928-87-4

A mixture of lH-l,2,4-triazole-3-carboxylic acid (22.6 mg, 0.2 mmol), EDCI (76.7 mg, 0.4 mmol), and 1-hydroxybenzotriazole (27 mg, 0.2 mmol) in DMF (2 mL) was stirred at room temperature for lOmin. Crude 2-(5-(5-((lR,3s,5S)-8-azabicyclo[3.2.1]octan-3-yl)-8H- pyrazolo[l ,5-a]pyrrolo[3,2-e]pyrimidin-3-yl)pyridin-2-yl)propan-2-ol from step 6 (0.25 mmol) was added followed by N,N-diisopropylethylamine (0.18 mL, 1 mmol). It was stirred further for 20 minutes at room temperature at which time LC/MS analysis confirmed full consumption of starting material. Pure compound ((lR,3s,5S)-3-(3-(6-(2-hydroxypropan-2- yl)pyridin-3-yl)-8H-pyrazolo[l,5-a]pyrrolo[3,2-e]pyrimidin-5-yl)-8-azabicyclo[3.2.1]octan-8- yl)(lH-l ,2,4-triazol-3-yl)methanone was isolated by preparative HPLC.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,2,4-Triazole-3-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MENG, Zhaoyang; PATEL, Mehul, F.; SIDDIQUI, M. Arshad; REDDY, Panduranga Adulla, P.; NAN, Yang; WO2013/16164; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The chemical industry reduces the impact on the environment during synthesis 4314-22-1, name is 2-(1H-1,2,3-Triazol-1-yl)acetic acid, I believe this compound will play a more active role in future production and life. 4314-22-1

Step C N-Methoxy-N-methyl-2-(1-(1, 2, 3-triazolyl)) acetamide Oxalyl chloride (0.95 mL, 11 mmol) was added dropwise to a suspension of 2- (1-1, 2,3-triazolyl)) acetic acid (Step B, 1.27 g, 10 mmol) in 10 mL CH2C12 containing 0.05 mL DMF. Vigorous effervescence was observed. This mixture was stirred at room temperature for 4 h and cooled to-78C. A solution of N. O- dimethylhydroxylamine hydrochloride (1.2 g, 13 mmol) and diisopropylethyl amine (6.0 mL, 35 mmol) in 10 mL CH2C12 was added slowly over 3 min. The mixture was then allowed to warm to room temperature and stirred overnight. The reaction mixture was then diluted with ether until no additional precipitate appeared. The solid was filtered and washed with ether. The filtrate was concentrated and the residue was purified on silica gel using EtOAc as solvent to provide the title compound as amorphous solid.

The chemical industry reduces the impact on the environment during synthesis 4314-22-1. I believe this compound will play a more active role in future production and life.

Reference:
Patent; MERCK & CO., INC.; WO2005/44785; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

6523-49-5,Some common heterocyclic compound, 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, molecular formula is C8H8N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of formamidine from Step 1 (151 mg) and 4-triazolylaniline(100 mg) in AcOH (5 ml) were heated to 125 for 3 h. The cooled reaction mixture was basified with 2N NaOH and the precipitate isolated by filtration and purified by column chromatography on silica gel with DCM:MeOH (2.5%) as eluant. This gave the title compound (200 mg).1H NMR delta 10.1 (IH, s), 9.3 (IH, s), 8.83 (IH, s), 8.63 (IH, s), 8.26 (IH, s), 8.19 (IH, d, J 8.85Hz), 8.07 (2H, d, J 8.85Hz), 7.92 (2H, d, J 8.85Hz), 7.85 (IH, d, J8.85Hz), 7.76 (IH, d, J 2.5Hz), 7.70 (IH, d, J 5Hz), 7.27 (IH, m); LC-MS rt 2.39 m/z369 ES-.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-(1,2,4-Triazol-1-yl)aniline, its application will become more common.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common compound: 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 4928-87-4

5-(3-oxa-9-azabicyclo[3.3.1]nonan-7-yl)-3-(6-phenylpyridin-3-yl)-8,9- dihydropyrazolotl,5-a]pyrido[3?2-e]pyrimidin-6(7H)-one (49.78 mg, 0.44 mmol) in DMF (2 mL) was treated with EDCI (129.47 mg, 0.678 mmol) and HOBt (45.6 mg, 0.339 mmol). Then substrate 5-(3-oxa-9-azabicyclo[3.3.1]nonan-7-yl)-3-(6-phenylpyridin-3-yl)-8,9~dihydropyrazolo[l,5-a]pyrido[3,2-e]pyrimidin-6(7H)-one (122 mg, 0.21 rnmol) followed by DIEA (0.29 mL, 1.69 mmol) was added. After 30 min, the reaction mixture was treated with water (0.4 mL) and DMSO-MeCN (3:1, 3 mL). Pure compound 5-((lR,5S)-9-(lH- 1,2,4- triazole-3-carbonyl)-3-oxa-9-azabicyclo[3.3.1]nonan-7-yl)-3-(6-phenylpyridin-3-yl)-8,9- dihydropyrazolo[l,5-a]pyrido[352-e]pyrimidin-6(7H)-one was isolated by preparative HPLC. HPLC-MS 4.35 min (UV 254 r.m). Mass calculated for formula C30H27N9O3 561.2; observed MH+ (LCMS) 561.98 (m/z).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4928-87-4, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SCHERING CORPORATION; MENG, Zhaoyang; REDDY, Panduranga Adulla, P.; SIDDIQUI, M. Arshad; MANDAL, Amit, K.; LIU, Duan; ZHAO, Lianyun; MCRINER, Andrew; WO2012/27234; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, A new synthetic method of this compound is introduced below., 6523-49-5

A mixture of the formamidine from step 1 (528 mg) and 4-triazolylaniline (294 mg) in AcOH (5 ml) was heated to 125 for 3 h. After cooling, the mixture was diluted and basified with IN NaOH (80 ml). The resulting cream ppt was isolated by filtration, and dried to give the title compound (495mg, 70%).1H NMR delta 10.3 (IH, br s), 9.34 (IH, s), 8.9 (IH, s), 8.67 (IH, s), 8.31 (IH, s),8.23 (IH, dd, J 8.85, 1.9Hz), 8.15 (2H, d, J 8.85Hz), 7.92 (4H, m), 7.19 (2H, d, J8.85Hz), 4.2 (2H, m), 2.72 (2H, m), 2.3 (6H, s); LC-MS rt 1.96 m/z 452 ES+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common compound: 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 7343-33-1

3-Bromo-1H-1,2,4-triazole (3 g, 20.28 mmol), copper (II) acetate (7.37 g, 40.56 mmol), phenylboronic acid (4.945 g, 40.56 mmol), pyridine (3.208 mL, 40.56 mmol), and crushed and activated 4 A molecular sieves (15 g) were combined in a 1000 mL round bottom flask. The mixture was diluted with dichloromethane (300 mL), and stirred over the weekend with the cap loose at room temperature. The reaction mixture was filtered through Celite and washed with methanol (approximately 100 mL). Celite was added and the mixture was concentrated to dryness under reduced pressure and purified by silica gel chromatography (80 gram Gold column (ISCO); 0-100percent ethyl acetate/hexane). Possible regioisomer observed in 1H NMR and in LC/MS (impurity runs faster). No separation on normal phase. Combined the desired fractions and concentrated to dryness under reduced pressure. The enriched material was diluted with dimethylsulfoxide and purified by reverse phase chromatography (275 gram Gold C-18 column (ISCO); 10-100percent acetonitrile/water with trifluoroacetic acid modifier). The pure fractions were concentrated to dryness under reduced pressure to give 3-bromo-1-phenyl-1,2,4- triazole (1.72 g, 38percent). 1H NMR (400 MHz, OMSO-de) delta 9.31 (s, 1H), 7.88 – 7.76 (m, 2H), 7.65 – 7.52 (m, 2H), 7.46 (t, J = 7.4 Hz, 1H) ppm. ESI-MS m/z calc. 222.9745, found 223.97 (M+l)+; Retention time: 2.66 minutes.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7343-33-1, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; BETHIEL, Randy Scott; CAO, Jingrong; COLLIER, Philip, N.; DAVIES, Robert J.; DOYLE, Elisabeth; FRANTZ, James Daniel; GOLDMAN, Brian Anthony; GREY, Ronald Lee; GRILLOT, Anne-laure; GU, Wenxin; KOLPAK, Adrianne Lynne; KRAUSS, Paul Eduardo; LIAO, Yusheng; MAGAVI, Sanjay Shivayogi; MESSERSMITH, David; PEROLA, Emanuele; RYU, Elizabeth, Jin-Sun; SYKEN, Joshua; WANG, Jian; (491 pag.)WO2018/106646; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

4928-87-4, Name is 1,2,4-Triazole-3-carboxylic acid, 4928-87-4, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

Step D – Synthesis ((1R,3s,5S)-3-(7-amino-6-(methylsulfonyl)-3-(6-phenylpyridin-3- yl)pyrazolo[1,5-a]pyrimidin-5-yl)-8-azabicyclo[3.2.1]octan-8-yl)(1H-1,2,4-triazol-3- yl)methanoneA mixture of 1 H-1 ,2,4-triazole-3-carboxylic acid (29.4 mg, 0.26 mmol), EDCI (76.7 mg, 0.4 mmol), and 1-hydroxybenzotriazole (27 mg, 0.2 mmol) in DMF (2 mL) was stirred at room temperature for 10 min. The 5-(8-azabicyclo[3.2.1]octan-3-yl)-6- (methylsulfonyl)-3-(6-phenylpyridin-3-yl)pyrazolo[1 ,5-a]pyrimidin-7-amine HCI (0.2 mmol) was added, followed by N,N-diisopropylethylamine (0.17 mL, 1 mmol). It was stirred further for 20 min at room temperature at which time LC/MS analysis confirmed full consumption of starting material. This crude compound was purification by HPLC to afford the desired title product.

Statistics shows that 1,2,4-Triazole-3-carboxylic acid is playing an increasingly important role. we look forward to future research findings about 4928-87-4.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SCHERING CORPORATION; SIDDIQUI, M. Arshad; NAN, Yang; PATEL, Mehul, F.; REDDY, Panduranga Adulla P.; MANSOOR, Umar Faruk; MENG, Zhaoyang; VITHARANA, Lalanthi Dilrukshi; ZHAO, Lianyun; MANDAL, Amit, K.; LIU, Duan; TANG, Shuyi; MCRINER, Andrew; BELANGER, David, B.; CURRAN, Patrick, J.; DAI, Chaoyang; ANGELES, Angie, R.; YANG, Liping; DANIELS, Matthew Hersh; WO2011/90935; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 4928-87-4 as follows. 4928-87-4

To prepare the nanoparticles of 1, 50ml solution of lead(II) nitrate (0.01 M) in water was positioned in a high-density ultrasonic probe, operating at 40 kHz with a maximum power output of 305 W. Into this aqueous solution a 50 ml solution of the ligand 1H-1,2,4-triazole-3-carboxylic acid (0.01 M) and sodium hydroxide (0.01 M) and potassium bromide (0.01 M) were added dropwise. The obtained precipitates were filtered off, washed with water and then dried in air. m.p.?180 C. (Found C 8.61, H 0.89, N 10.12%). IR (cm-1) selected bands: 466 (s), 661 (s), 1106 (s), 1309 (m), 1373 (m), 1465 (vs), 1610 (s) and 3373 (br).

According to the analysis of related databases, 4928-87-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Safarifard, Vahid; Morsali, Ali; Joo, Sang Woo; Ultrasonics Sonochemistry; vol. 20; 5; (2013); p. 1254 – 1260;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 3641-08-5, name is 2H-1,2,4-Triazole-3-carboxamide, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3641-08-5. 3641-08-5

A stirred mixture of 1H-1,2,4-triazole-3-carboxamide (500 mg, 4.46 mmol) in 1,2-dichloroethane (4.46 mL) treated at room temperature with 2,6-lutidine (2.08 mL, 17.84 mmol) and triethylsilyl trifluoromethanesulfonate (3.03 mL, 13.38 mmol) and heated under a nitrogen atmosphere at 50C. After 4 hours of heating the reaction solution allowed to cool to room temperature and diluted with dichloromethane (25 mL), washed with water (25 mL), 0.5M hydrochloric acid (25 mL), water (25 mL), dried over MgSO4, filtered, and evaporated to solid. The solid was flash chromatographed (silica gel, 10-65% ethyl acetate:hexane) to give the product as a white solid (683 mg).1H NMR (CDCl3, 500MHz, ppm) 0.89 (q, J=8Hz, 6H, CH2), 1.03 (t, J=8 Hz, 9H, CH3), 6.77 (s, 1H, NH), 8.63 (s, 1H, triazole H-5).LC/MS m/z (positive ion scan) M+l= 227.20.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2H-1,2,4-Triazole-3-carboxamide.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SCYNEXIS, INC.; GREENLEE, Mark, L.; WILKENING, Robert; APGAR, James; SPERBECK, Donald; WILDONGER, Kenneth, James; MENG, Dongfang; PARKER, Dann, L.; PACOFSKY, Gregory, James; HEASLEY, Brian, Haid; MAMAI, Ahmed; NELSON, Kingsley; WO2010/19204; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The chemical industry reduces the impact on the environment during synthesis 6818-99-1, name is 3-Chloro-1,2,4-triazole, I believe this compound will play a more active role in future production and life. 6818-99-1

200 mg of intermediate 35, 60% sodium hydride(Oily) 37 mg, and DMF 2 mL,Under ice-cooling, 67 mg of 3-chloro-1H-1,2,4-triazole was added. After stirring for 2.5 hours under ice cooling,Saturated multilayer aqueous solution was added to the reaction mixture,And extracted with ethyl acetate. The organic layer was washed with water and saturated brine, and dried over anhydrous sodium sulfate.The obtained organic layer was dried under reduced pressure.The obtained residue was subjected to silica gel chromatography,171 mg of the present invention compound 246 described below was obtained.

The chemical industry reduces the impact on the environment during synthesis 6818-99-1. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Sumitomo Chemical; Ikari, Kaori; (123 pag.)JP2019/6686; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics