Tag: M.W:100-200

Adding a certain compound to certain chemical reactions, such as: 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1001401-62-2, Quality Control of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

A solution of (R)-tert-butyl 5-methyl-l,4-diazepane-l-carboxylate Int A (2.50 g, 11.7 mmol) in DMF (50 mL) was treated with Int H (2.21 g, 11.7 mmol), HATU (4.47 g, 11.8 mmol), and DIEA (4.89 ml, 28.0 mmol). The reaction was stirred at room temperature overnight, then diluted with saturated, aqueous NH4CI. The solution was extracted with EtOAc (2x) and the organics were subsequently washed with brine, then with water, then with brine again, dried over MgS04, filtered, and concentrated. The crude material was purified by silica gel gradient chromatography (0-60% ethyl acetate in hexanes), providing 1-1 as an oil. LRMS m/z (M+H) 386.2 found, 386.2 required.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; REGER, Thomas, S.; SKUDLAREK, Jason, W.; (0 pag.)WO2016/85784; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 4928-87-4,Some common heterocyclic compound, 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 8-azabicyclo[3.2. l]octan-3-yl)-3-(6-phenylpyridin-3-yl)-6,7,8,9- tetrahydropyrazolo[l,5-a]pyrido[3,2-e]pyrimidine (73 mg, 0.17 mmoL), lH-l,2,4-triazole-3- carboxylic acid (22.7 mg, 0.20 mmoL), EDC (64.0 mg, 0.33mmoL), HOBt (45.2 mg, 0.33 mmoL) and DIEA (173.9 mu, 1.00 mmoL) in DMF (2 mL) was stirred at room temperature for lh. Purification with prep-LC provided (3-(3-(6-phenylpyridin-3-yl)-6,7>8,9- tetrahydropyrazolo[l ,5-a]pyrido[3,2-e]pyrimidin-5-yl)-8-azabicyclo[3.2.1 ]octan-8-yl)(4H- lf2,4-triazol-3-yl)methanone: LCMS tR = 2.48 Min (10 min run, UV254nm). Mass calculated for, M+ 531.2, observed LC/MS m/z 532.0 (M+H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,2,4-Triazole-3-carboxylic acid, its application will become more common.

Reference:
Patent; SCHERING CORPORATION; MENG, Zhaoyang; NAN, Yang; PATEL, Mehul; SIDDIQUI, M. Arshad; REDDY, Panduranga Adulla, P.; SUN, Binyuan; WO2012/27240; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 1001401-62-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, This compound has unique chemical properties. The synthetic route is as follows.

Step (vii): tert-Butyl N-{4-[(4-methoxyphenyl)methoxy]-2-[2-(2H-1,2,3-triazol-2-yl)benzamido]cyclopentyl}carbamate To a solution of tert-butyl N-{2-amino-4-[(4-methoxyphenyl)methoxy]cyclopentyl}-carbamate (1.71 g, 5.08 mmol) in dry DMF (17 ml) was added 2-(2H-1,2,3-triazol-2-yl)benzoic acid (CAS number 1001401-62-2; 1.06 g, 5.59 mmol), HATU (2.90 g, 7.62 mmol) and triethylamine (2.13 ml, 15.25 mmol). The reaction was stirred at room temperature for 72 hours then partitioned between ethyl acetate and water. The organics were washed with brine, dried over magnesium sulfate, filtered and concentrated in vacuo. The crude material was purified by column chromatography (silica, 0-100% ethyl acetate petrol) to afford the title compound. 1H NMR (400 MHz, DMSO-d6) delta ppm 1.37 (s, 9H), 1.46-1.59 (m, 1H), 1.58-1.77 (m, 1H), 1.86-1.97 (m, 1H), 2.18-2.37 (m, 1H), 3.67-3.79 (m, 4H), 3.83-4.01 (m, 2H), 4.32 (s, 2H), 6.85-6.95 (m, 2H), 7.17-7.31 (m, 2H), 7.44-7.54 (m, 2H), 7.55-7.66 (m, 1H), 7.76 (s, 1H), 7.96-8.05 (m, 2H) MS ES+: 508

The chemical industry reduces the impact on the environment during synthesis 2-(2H-1,2,3-Triazol-2-yl)benzoic acid. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Takeda Pharmaceutical Company Limited; Fieldhouse, Charlotte; Glen, Angela; Maine, Stephanie; Fujimoto, Tatsuhiko; Robinson, John Stephen; US2015/232460; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

A solution of 2-(2H-1,2,3-triazol-2-yl)benzoic acid (4.3 g, 0.023 mol) in 15 mL of 50C12 was heated at 50 C for 30 mins. After cooling to RT, the mixture was concentrated in vacuo to remove the solvent. To a solution of the product from step 1 (3.3 g, 0.02 mol) and TEA (8.7 mL, 0.06 mol) in dry DCM (10 mL) at 0 C was added a solution of the above residue inDCM (10 mL) dropwise. The resulting mixture was stirred at RT overnight. The mixture was filtered and the filtrate was concentrated in vacuo. The residue was purified by silica gel column chromatography (50% EtOAc in petroleum ether) to give the title compound as an oil. LRMS m/z (M+H) 331.1 found, 331.2 required.

The synthetic route of 1001401-62-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; LIVERTON, Nigel; LUO, Yunfu; (58 pag.)WO2016/89722; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 81606-79-3, name is 2-(1,2,4-Triazol-1-yl)acetonitrile, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 81606-79-3, Computed Properties of C4H4N4

General procedure: A solution of aryl acetonitrile 2 (50 mg), and triethylamine (1.1 equiv.) in dimethylformamide dimethyl acetal (0.5 mL, 3.76 mmol) was heated in a microwave reactor at 120 C for 20 minutes. The mixture was cooled to RT, and solvents were then evaporated. To the resulting crude product 3 was added hydrazine mono-hydrobromide (3.0 equiv.), 200 proof EtOH (1.0 mL), and H2O (0.3 mL). The mixture was heated in a microwave reactor at 120 C for 20 minutes. The mixture was cooled to RT and concentrated in vacuo. The resulting residue was subjected to liquid-liquid extraction using saturated NaHCO3 (aq) and CH2Cl2. The organic layer was collected, dried over anhydrous MgSO4, filtered and removed under vacuum to afford 4.The resulting crude product 4 and 2-arylsubstitutedmalondialdehydes or 1,1,3,3tetramethoxypropane (1.0 equiv.) were dissolved in glacial AcOH (1.0 mL) and 200 proof EtOH (1.5 mL). The mixture was heated in a microwave reactor at 120 C for 20 minutes. After cooling on ice, the precipitate was collected on a fine scintered-glass frit and washed with icecold EtOH (2 x 1.0 mL). The resulting crystals 5-32 were dried and collected.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(1,2,4-Triazol-1-yl)acetonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Singleton, Justin D.; Dass, Reuben; Neubert, Nathaniel R.; Smith, Rachel M.; Webber, Zak; Hansen, Marc D.H.; Peterson, Matt A.; Bioorganic and Medicinal Chemistry Letters; vol. 30; 2; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione, A new synthetic method of this compound is introduced below., Formula: C8H7N3O2

General procedure: General procedure for the synthesis oftriazolo[1,2-a]indazole-trione (1a-g) and2H-indazolo[2,1-b]phthalazine-triones (2a-g)To a well-ground mixture of arylaldehyde (1 mmol), dimedone(0.140 g, 1 mmol) and 4-phenylurazole (0.177 g, 1 mmol) or2,3-dihydrophthalazine-1,4-dione (0.162 g, 1 mmol), was added[Et3N-SO3H]HSO4[(0.028 g, 0.1 mmol) for the preparation of1a-gor (0.042 g, 0.15 mmol] for the synthesis of2a-g}. Theobtained mixture was firstly stirred magnetically at 90C, andafter solidification of the reaction mixture, it was stirred with asmall rod at same temperature. After the reaction was completed(as observed by TLC), the reaction mixture was cooled to roomtemperature, water (2 mL) was added, stirred for 3 min, andfiltered. The solid residue was recrystallized from EtOH/H2O(4/1) to give the pure product.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Zare, Abdolkarim; Masihpour, Fatemeh; Phosphorus, Sulfur and Silicon and the Related Elements; vol. 191; 8; (2016); p. 1160 – 1165;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16681-70-2, Product Details of 16681-70-2

[0824] lH-1,2,3-triazole-5-carboxylic acid (3.4 mg, 30f.tmol) was combined with HATU (11 mg, 30 f.tmol) in DMF(0.3 mL) and stirred at room temperature for 10 minutes;DIPEA (1 eq.) was added and the mixture was stirred for 1minute. Compound 2 (1 0 mg, 30 f.tmol) was dissolved in DMF(0.5 mL) and DIPEA (5.2 f.LL, 30 fllllOl) was added, followedby addition of the activated acid solution. The mixture wasstirred at room temperature for 30 minutes, after which timeLCMS indicated desired product formation. Half of the crudeproduct was purified using reverse phase chromatography toyield Compound a (4.3 mg) as a TFA salt. MS m/z [M+Htcalc’d for C27H31ClFN50 4 , 544.21; found 544. Half of thecrude product was used in the next step without purification.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6818-99-1, name is 3-Chloro-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

300 mg of intermediate 31, sodium hydride(60%, oil) 45 mg and DMF 1.3 mL, 116 mg of 3-chloro-1 H-1,2,4-triazole was added under ice cooling. After the reaction mixture was stirred for 20 hours under ice cooling, water was added to the reaction mixture,And extracted with ethyl acetate. The obtained organic layer was washed with water,After drying with anhydrous sodium sulfate, it was dried under reduced pressure.The obtained residue was subjected to silica gel chromatography,240 mg of the present compound 1299 described below was obtained.

The synthetic route of 6818-99-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sumitomo Chemical; Ikari, Kaori; (123 pag.)JP2019/6686; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 4928-88-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4928-88-5, name is Methyl 1H-1,2,4-triazole-3-carboxylate belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 8 A mixture of methyl 1,2,4-triazole-3-carboxylate (26.4 g, 0.21 mole) and beta-D-ribofuranosyl-1,2,3,5-tetraacetate (60.2 g, 0.19 mole) was melted and then 1.1 g of p-toluenesulfonic acid was added thereto. The reaction mixture was reacted for 5 hours, while maintaining the temperature of the reaction mixture at 95+-5¡ã C. And then, the reaction mixture was crystallized with 180.5 ml of methanol to give 68.9 g of 1-(2,3,5-tri-O-acetyl-beta-D-ribofuranosyl)-1,2,4-triazole-3-carboxylic acid methyl ester (yield: 95percent).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 1H-1,2,4-triazole-3-carboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Lee, Tai-Au; Park, Nam-Jin; Khoo, Ja-Heouk; Lee, Byung-Cheol; US2003/120064; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, A new synthetic method of this compound is introduced below., category: Triazoles

General procedure: Into a round bottom flask was added 5.71mmolof triazole type 12 or 21a in 50mL of dry THF, 17.13mmolof sodium hydride and 57.1mmolof alkyl bromide. The mixture was heated to reflux, and reaction progress was monitored by TLC. Subsequently, the solvent was evaporated and the mixture was extracted with ethyl acetate, washed with distilled water (3¡Á100mL) and dried over anhydrous sodium sulfate. The solvent was evaporated under reduced pressure, and the product was purified via silica-gel column chromatography using a gradient mixture of hexane-ethyl acetate, to afford the pure derivatives 14a-g and 23a-b.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Gonzaga, Daniel; Senger, Mario Roberto; Da Silva, Fernando De Carvalho; Ferreira, Vitor Francisco; Silva Jr., Floriano Paes; European Journal of Medicinal Chemistry; vol. 74; (2014); p. 461 – 476;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics