Tag: M.W:100-200

These common heterocyclic compound, 162848-16-0, name is 4-[1,2,4]Triazol-1-yl-benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: Triazoles

A mixture of Cd(NO3)2¡¤4H2O (0.0308g, 0.1mmol), Hcpt (0.0189g, 0.1mmol) and DMF/CH3CN/H2O (8mL, 6:1:1, v/v/v) was placed in a tightly capped 20mL vial under ultrasonic irradiation to produce a clear solution, which was then heated at 85C for 3days and cooled to room temperature at a rate of 10Ch-1. Colorless block shaped crystal of 1 were collected in 56% yield (based on Cd). The resulting crystals were rinsed with DMF three times and then dried at room temperature. Elemental analysis for C10H7CdN3O4 (Mr=345.60) (1): calcd: C 34.75, H 2.04, N 12.16%; found: C 34.68, H 2.09, N 12.47%. The phase purity of the bulk crystals was proved by their powder X-ray diffraction (PXRD) pattern (Fig. S1).

The synthetic route of 4-[1,2,4]Triazol-1-yl-benzoic acid has been constantly updated, and we look forward to future research findings.

Reference:
Article; Xia, Yu-Pei; Li, Yun-Wu; Li, Da-Cheng; Du, Yu-Chang; Yao, Qing-Xia; Dou, Jian-Min; Journal of Molecular Structure; vol. 1081; (2015); p. 362 – 365;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 3641-13-2, name is 5-Amino-4H-1,2,4-triazole-3-carboxylic acid, molecular formula is C3H4N4O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 5-Amino-4H-1,2,4-triazole-3-carboxylic acid

3-Amino-1,2,4-triazole-5-carboxylic acid hydrate (1.28g, O.OImol) was dissolved in water (50ml). Sodium nitrite (0.76g, 0.011mol) was added and the solution was stirred until the sodium nitrite had dissolved. The mixture was then added dropwise to a cooled mix of ice-water (30g) and concentrated hydrochloric acid (3.0ml) at 0-5C. The mixture was stirred for 30 minutes at 0-5C and then excess nitrous acid was destroyed by the addition of sulfamic acid. The resultant diazonium salt suspension was added slowly to a solution of 6-hydroxyquinoline (1.45g, O.OImol) in water (100ml) at pH 8-9 (adjusted with 2M NaOH) and cooled to below 5C. The reaction mixture was then stirred at 0-5C for one hour and the product was precipitated by acidification to pH 4 with 2M HCI and collected by filtration. The product was washed with water and then dried in a vacuumdesiccator to give an orange solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3641-13-2, its application will become more common.

Reference:
Patent; AVECIA LIMITED; WO2004/108834; (2004); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 4928-87-4, These common heterocyclic compound, 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (226 mg, 2.0 mmol) and butan-l-amine (0.21 mL, 2.1 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (337 mg, 2.2 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’-ethylcarbodiimide) (422 mg, 2.2 mmol) followed by N- methylmorpholine (0.88 mL, 8.0 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using EtOAc and Hexanes (80:20) as eluents to get the desired amide 12 (32 mg, 10 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): <514.75-14.44 (m, 1H), 8.58 (br s, 1H), 8.41 (br s, 1H), 3.26- 3.20 (m, 2H), 1.54-1.45 (m, 2H), 1.35-1.23 (m, 2H), 0.89 (t, J= 7.2 Hz, 3H) ppm. MH+ = 169.2 m/z. Statistics shows that 1,2,4-Triazole-3-carboxylic acid is playing an increasingly important role. we look forward to future research findings about 4928-87-4. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 6818-99-1, name is 3-Chloro-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6818-99-1, SDS of cas: 6818-99-1

A suspension of (1S,4aR,6aS,7R,8R,10aR,10bR,12aR,14R,15R)-14-(acetyloxy)- 15-[2-(dimethylamino)-2,3-dimethylbutoxy]-8-[(lR)-1,2-dimethylpropyl]- 1,6,6a,7,8,9,10,10a,10b,11,12,12a-dodecahydro-l^deltaJOa-tetramethyl–oxo-4H-l^a-propano- 2H-phenanthro[1,2-c]pyran-7-carboxylic acid (the compound of Example 130 in International Patent Publication No. WO 2007/127012, herein incorporated by reference in its entirety; 20 mg, 0.03 mmol), 3-chloro-iH-1,2,4-triazole (26.8 mg, 0.259 mmol) and boron trifluoride etherate (75 muL, 0.592 mmol) in dichloroethane (0.7 mL) was blanketed with nitrogen and placed in a 50C oil bath for 24 hours. The mixture was cooled to room temperature, evaporated and the residual oil was separated by reverse phase EtaPLC using a 19 x 150 mm Sunfire Preparative C18 OBD column. The product containing fractions were evaporated and freeze-dried from a mixture of ethanol and benzene to give EXAMPLE 9A as a white solid (3.4 mg), EXAMPLE 9B as a white solid (2.0 mg) and EXAMPLE 9C as a white solid (2.0 mg).EXAMPLE 9A:1H NMR (CD3OD, 600MHz, ppm) delta 0.70 (d, 3H, Me), 0.77 (d, 3H, Me), 0.80 (s, 3H, Me), 0.86-0.98 (multiple Me signals), 1.09 (s, 3H, Me), 1.16 (s, 3H, Me), 1.18 (s, 3H, Me), 1.29-1.48 (m), 1.52-1.57 (m), 1.70 (s, 3H, Me), 1.67-1.86 (m), 1.94-1.99 (m), 2.20-2.26 (m), 2.52 (dd, 1H, H13), 2.54 (dd, 1H, H13), 2.74 (s, NMe2), 2.80 (s, NMe2), 2.82 (s, NMe2), 2.85 (s, NMe2), 3.09 (s, 1H, H7), 3.58 (d, 1H), 3.62 (dd, 1H), 3.68 (d, 1H), 3.79 (d, 1H), 3.85 (d, 1H), 5.60 (br m, 1H, H14), 5.79 (dd, 1H, H5), 5.80 (dd, 1H, H5), 9.04 (br s, 1H, triazole). Mass spectrum: (ESI) m/z = 715.38 (M+H).EXAMPLE 9B:1H NMR (CD3OD, 600MHz, ppm) delta 0.72 (d, 3H, Me), 0.76 (d, 3H, Me), 0.80 (s, 3H, Me), 0.88 (d, 3H, Me), 0.89 (d, 3H, Me), 0.91 (d, 3H, Me), 0.92 (d, 3H, Me), 0.95 (d, 3H, Me), 0.96 (s, 3H, Me), 1.09 (s, 3H, Me), 1.16 (s, 3H, Me), 1.29-1.48 (m), 1.52-1.57 (m), 1.67 (s, 3H, Me), 1.68-1.86 (m), 1.90-1.99 (m), 2.04-2.09 (m), 2.19-2.26 (m), 2.37 (dd, 1H, H13), 2.39 (dd, 1H, H13), 2.66-2.72 (m), 2.71 (s, NMe2), 2.79 (s, NMe2), 2.81 (d, 1H), 3.09 (s, 1H, H7), 3.17 (d, 1H), 3.57 (d, 1H), 3.60-3.64 (m), 3.68 (dd, 1H), 3.72 (d, 1H), 3.80 (d, 1H), 3.86 (d, 1H), 3.99 (d, 1H), 4.20 (d, 1H), 5.72 (m, 1H, H14), 5.77 (dd, 1H, H5), 8.07 (s, 1H, triazole). Mass spectrum: (ESI) m/z = 715.38 (M+H).EXAMPLE 9C:1H NMR (CD3OD, 600MHz, ppm) 50.72 (d, 3H, Me), 0.75 (d, 3H, Me), 0.77 (d, 3H, Me), 0.80 (s, 3H, Me), 0.86-0.96 (multiple Me signals), (s, 3H, Me), 1.03 (s, 3H, Me), 1.05 (s, 3H, Me), 1.09 (s, 3H, Me), 1.17 (s, 3H, Me), 1.19 (s, 3H, Me), 1.28-1.48 (m), 1.50 (s, 3H, Me), 1.52-1.54 (m), 1.69 (s, 3H, Me), 1.60-1.81 (m), 1.90-1.98 (m), 2.20-2.26 (m), 2.46 (dd, 1H, H13), 2.48 (dd, 1H, H13), 2.76 (s, NMe2), 2.80 (s, NMe2), 2.81 (d, 1H), 3.09 (s, 1H, H7), 3.10 (s, 1H, H7), 3.52-3.68 (m), 3.71-3.90 (m), 5.60 (m, 1H, H14), 5.76 (dd, 1H, H5), 8.63 (s, 1H, triazole).Mass spectrum: (ESI) m/z = 715.38 (M+H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Chloro-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP &amp; DOHME CORP.; SCYNEXIS, INC.; GREENLEE, Mark, L.; WILKENING, Robert; APGAR, James; SPERBECK, Donald; WILDONGER, Kenneth, James; MENG, Dongfang; PARKER, Dann, L.; PACOFSKY, Gregory, James; HEASLEY, Brian, Haid; MAMAI, Ahmed; NELSON, Kingsley; WO2010/19204; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 3641-13-2,Some common heterocyclic compound, 3641-13-2, name is 5-Amino-4H-1,2,4-triazole-3-carboxylic acid, molecular formula is C3H4N4O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of benzil (0.01 mol), aldehydes (0.01 mol), 3-amino-1,2,4-triazole-5-carboxylic acid (0.01 mol), ammonium acetate (0.01 mol) and ceric ammonium nitrate (15 mol%) as a catalyst were refluxed in ethanol (15 mL) for about 3-4 h. The progress of the reaction was monitored by TLC. After completion of reaction, the mixture was cooled to room temperature. The solid formed was filtered and dried. The crude products were recrystallized by ethanol.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Amino-4H-1,2,4-triazole-3-carboxylic acid, its application will become more common.

Reference:
Article; Nikalje, Anna Pratima G.; Ghodke, Mangesh S.; Kalam Khan, Firoz A.; Sangshetti, Jaiprakash N.; Chinese Chemical Letters; vol. 26; 1; (2015); p. 108 – 112;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3179-31-5, name is 1H-1,2,4-Triazole-3-thiol, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C2H3N3S

A. 3-(3-Bromophenyl)-lH-l,2,4-triazoIe. In a sealed tube, a solution of 3- bromobenzaldehyde (1.Og, 5.0 mmol) was treated with dimethylformamide dimethylacetal (5 mL) at 100 C for 6 h. Upon completion of the reaction, the volatiles were removed under reduced pressure. The crude product was treated with hydrazine (2 mL) and acetic acid (10 drops) at room temperature for 1 h. The volatiles were removed under reduced pressure. The crude product was dried under high vacuum, and used without further purification in the next step. MS (ESI) m/z 226.1 [M+l]+.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3179-31-5.

Reference:
Patent; SIGNAL PHARMACEUTICALS, LLC; WO2008/51493; (2008); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7343-33-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

2 – (6 – chloro – 3 – ethanesulfonyl – pyridin – 2 – yl) – 3 – methyl – 6 – trifluoromethyl – 3 H – imidazo [4,5 – b] pyridine300 mg,Potassium carbonate133 mg, and N, N-dimethylformamide 3 mL, 3-boule132 mg of lomo-1 H-1,2,4-triazole was added. And the mixture was stirred for 2.5 hours under ice coolingAfter that, a saturated multilayer aqueous solution was added to the reaction mixture, and the mixture was extracted with ethyl acetate. Water and saturated organic layerWashed with Japanese salt water, and dried with anhydrous sodium sulfate. The obtained organic layer was dried under reduced pressure.The obtained residue was subjected to silica gel chromatography, and the following compound 3 described below was separated by 370 mg.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Bromo-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SUMITOMO CHEMICAL COMPANY LIMITED; NISHIGUCHI, NAONOBU; SUNAMURA, EIRIKI; (25 pag.)JP2017/52702; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 13273-53-5,Some common heterocyclic compound, 13273-53-5, name is 4-Bromo-1-methyl-1H-1,2,3-triazole, molecular formula is C3H4BrN3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of 6-1 (50 mg, 0.13 mmol, 1.0 eq) and 6-la (28 mg, 0.17 mmol, 1.30 eq) in dioxane (2 mL) and H20 (0.5 mL) was added Na2C03 (38 mg, 0.36 mmol, 2.7 eq) and Pd(dppf)Cl2 (10 mg, 13 umol, 0.1 eq) in one portion under N2. The mixture was stirred at 100 C for 16 h. LCMS showed the starting material was consumed completely and one peak with desired MS was detected. The reaction mixture was concentrated under reduced pressure to remove solvent, and then added CH3CN (5 mL), filtered to give a black-brown liquid. The residue was purified by prep-HPLC. LCMS and XH NMR confirmed Compound 6 was obtained (2.06 mg, 5.5 umol, 4.2% yield, HC1). LCMS (ESI): RT = 0.752 min, mass calcd. For Ci6H22N402S, 334.15 m/z found 334.9[M+H]+.1H NMR (400MHz, DMSO-c) 58.76 (s, 1H), 8.34 (br s, 1H), 7.95 (d, J=2.00 Hz, 1H), 7.60 (dd, J=8.80, 2.00 Hz, 1H), 6.91 (d, J=8.80 Hz, 1H), 4.13 (s, 3H), 3.11 (s, 3H), 2.60 – 2.53 (m, 1H), 2.02 – 1.89 (m, 2H), 1.74 – 1.63 (m, 2H), 1.62 – 1.51 (m, 1H), 1.49 – 1.26 (m, 5H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Bromo-1-methyl-1H-1,2,3-triazole, its application will become more common.

Reference:
Patent; VIVACE THERAPEUTICS, INC.; KONRADI, Andrei W.; LIN, Tracy Tzu-Ling Tang; (294 pag.)WO2019/40380; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, A new synthetic method of this compound is introduced below., SDS of cas: 16681-70-2

1,2,3-Triazole-4-carboxylic acid (0.0274 g, 0.242 mmol), DIPEA (169 muL, 969 mumol) and HATU (92 mg, 242 mumol) were combined in DMF (0.2 mL) and stirred for 5 minutes at room temperature. This was then combined with (2S,4R)-4-amino-5-biphenyl-4-yl-2-hydroxymethyl-2-methyl-pentanoic acid 2-piperidin-1-yl-ethyl ester (103 mg, 242 mumol), predissolved in DMF (0.2 mL) and DIPEA (0.5 eq.). The resulting mixture was stirred for 15 minutes and the reaction was quenched with AcOH. The product was purified by preparative HPLC and lyophilized to yield the title compound (40 mg; purity 95%). MS m/z [M+H]+ calc’d for C29H37N5O4, 520.28. found 520.4.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 15988-11-1, These common heterocyclic compound, 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of dimedone (1 mmol), aldehyde or isatin (1 mmol) and 4-phenylurazole (1 mmol), and catalyst (0.01 g, 5 mol%) in water (5 mL) was refluxed. After completion of the reaction that was monitored by TLC (EtOAc:n-hexane, 1:3), the reaction mixture was cooled to room temperature. Then, the precipitated product was filtered and washed with water and cooled with ethanol to afford the pure product.

The synthetic route of 15988-11-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Seyyedhamzeh, Mozhdeh; Shaabani, Shabnam; Hamidzad Sangachin, Mona; Shaabani, Ahmad; Research on Chemical Intermediates; vol. 42; 4; (2016); p. 2845 – 2855;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics