Simple exploration of 1001401-62-2

The synthetic route of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid has been constantly updated, and we look forward to future research findings.

Reference of 1001401-62-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

Example 22 2-(2H-1,2,3-Triazol-2-yl)-N-(2-{[4-(trifluoromethyl)pyridin-2-yl]methyl}cyclopentyl)benzamide Triethylamine (0.099 ml, 0.71 mmol), 3H-[1,2,3]triazolo[4,5-b]pyridin-3-ol (0.039 g, 0.29 mmol) and EDC (0.055 g, 0.29 mmol) were added to a solution 2-{[4-(trifluoromethyl)pyridin-2-yl]methyl}cyclopentan-1-amine (Intermediate 12; 0.058 g, 0.24 mmol) and 2-(2H-1,2,3-triazol-2-yl)benzoic acid (CAS number 1001401-62-2; 0.054 g, 0.29 mmol) in DCM (3 ml). The reaction was stirred at room temperature for 24 hours and then diluted with DCM (40 ml) and washed with a saturated solution of sodium bicarbonate (10 ml). The organics were dried over magnesium sulfate, filtered through a hydrophobic frit and concentrated in vacuo. The crude product was purified by column chromatography (silica, 0-80% ethyl acetate/petrol) to afford the title compound. 1H NMR (400 MHz, DCM-d2) delta ppm 1.19-1.31 (m, 1H), 1.39-1.49 (m, 1H), 1.50-1.64 (m, 2H), 1.65-1.75 (m, 1H), 1.91-2.02 (m, 1H), 2.48-2.59 (m, 1H), 2.68-2.76 (m, 1H), 3.00-3.08 (m, 1H), 4.36-4.45 (m, 1H), 6.45-6.53 (m, 1H), 7.30-7.34 (m, 1H), 7.37 (s, 1H), 7.48-7.54 (m, 1H), 7.55-7.61 (m, 1H), 7.62-7.66 (m, 1H), 7.71-7.75 (m, 1H), 7.82 (s, 2H) and 8.59-8.62 (m, 1H). MS ES+: 416 Example 23 2-(2H-1,2,3-Triazol-2-yl)-N-(2-{[4-(trifluoromethyl)pyridin-2-yl]methyl}cyclopentyl)benzamide Prepared according to the procedure for 2-(2H-1,2,3-triazol-2-yl)-N-(2-{[4-(trifluoromethyl)pyridin-2-yl]methyl}cyclopentyl)benzamide (Example 22) except this was then was chirally separated using SFC (Waters prep30/MS system using 20% Ethanol, Daicel IA 10 mm id¡Á250 mm long columns at 30 ml min, 40 C. and 100 bar) to afford the title compound as a single enantiomer. 1H NMR (300 MHz, DCM-d2) delta ppm 1.15-1.35 (m, 1H), 1.35-1.79 (m, 4H), 1.85-2.06 (m, 1H), 2.42-2.63 (m, 1H), 2.64-2.79 (m, 1H), 2.95-3.16 (m, 1H), 4.28-4.53 (m, 1H), 6.44-6.59 (m, 1H), 7.26-7.43 (m, 2H), 7.43-7.68 (m, 3H), 7.69-7.77 (m, 1H), 7.82 (s, 2H), 8.54-8.68 (m, 1H). MS ES+: 416

The synthetic route of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Takeda Pharmaceutical Company Limited; Fieldhouse, Charlotte; Glen, Angela; Maine, Stephanie; Fujimoto, Tatsuhiko; Robinson, John Stephen; US2015/232460; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Continuously updated synthesis method about 16681-70-2

The synthetic route of 16681-70-2 has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, A new synthetic method of this compound is introduced below., HPLC of Formula: C3H3N3O2

Example 6 2-{(R)-3-(5?-Chloro-2?-fluorobiphenyl-4-O-2-[(1H-[1,2,3]triazole-4-carbonyl)amino]propyl}-2-methylmalonic Acid [0413] 1H-1,2,3-triazole-4-carboxylic acid (3.3 mg, 29 mumol) and HATU (10.5 mg, 28 mumol) were dissolved in DMF (2.0 mL) and stirred for 15 minutes at room temperature. 2-[(R)-2-Amino-3-(5?-chloro-2?-fluorobiphenyl-4-yl)propyl]-2-methylmalonic acid (12.0 mg, 32 mumol) and DIPEA (9.2 muL, 53 mumol) were added, and the resulting mixture was stirred for 15 minutes at room temperature, at which time LCMS indicated the mass of the desired compound. The mixture was concentrated in vacuo and the residue was purified by preparative HPLC to yield the title compound (5 mg) as a TFA salt. MS m/z [M+H]+ calc’d for C22H20ClFN4O5, 475.11. found 475.

The synthetic route of 16681-70-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/209352; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Analyzing the synthesis route of 16681-70-2

The synthetic route of 1H-[1,2,3]Triazole-4-carboxylic acid has been constantly updated, and we look forward to future research findings.

These common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 1H-[1,2,3]Triazole-4-carboxylic acid

Example 15 (R)-5-(5?-Chloro-2?-fluorobiphenyl-4-O-2-hydroxymethyl-2-propyl-4-[(3H-[1,2,3]triazole-4-carbonyl)amino]pentanoic Acid (isomers a and b) [0434] (R)-4-Amino-5-(5?-chloro-2?-fluorobiphenyl-4-yl)-2-hydroxymethyl-2-propylpentanoic acid (isomer a; 40 mg, 90 mumol, 1.0 eq.) and DIPEA (40 muL, 228 mumol, 2.5 eq.) were dissolved in DMF (200 muL). 1H-1,2,3-triazole-4-carboxylic acid (17 mg, 150 mumol, 1.5 eq.), HATU (45 mg, 120 mumol, 1.5 eq.), and DIPEA (40 muL, 228 mumol, 2.5 eq.) were dissolved in DMF (600 muL) and stirred at room temperature for a few minutes. The solutions were then combined and the resulting mixture stirred at room temperature until LC/MS analysis revealed consumption of starting material. The mixture was concentrated in vacuo and purified by preparative HPLC to yield the title compound (isomer a; 15.7 mg). LCMS (ESI): calc. C24H26ClFN4O4=488; obs. M+H=489.2. Retention time: 5.03 min. [0436] (R)-4-Amino-5-(5?-chloro-2?-fluorobiphenyl-4-yl)-2-hydroxymethyl-2-propylpentanoic acid (isomer b; 60 mg, 140 mumol, 1.0 eq.) and DIPEA (40 muL, 228 mumol, 1.6 eq.) were dissolved in DMF (300 muL). 1H-1,2,3-triazole-4-carboxylic acid (24 mg, 210 mumol, 1.5 eq.), HATU (57 mg, 150 mumol, 1.0 eq.), and DIPEA (80 muL, 456 mumol, 3.2 eq.) were dissolved in DMF (900 muL) and stirred at room temperature for a few minutes. The solutions were then combined and the resulting mixture stirred at room temperature and when the reaction was complete (as determined by LC/MS analysis), the mixture was concentrated in vacuo and purified by preparative HPLC to yield the title compound (isomer b; 33.7 mg). LCMS (ESI): calc. C24H26ClFN4O4=488; obs. M+H=489.2. Retention time: 4.98 min. [0437] LC/MS Method: flow rate: 1.5 mL/min; Buffer A: 0.1% TFA/H2O; Buffer B 0.1% TFA/MeCN; gradient elution from 5%-100% B over 9.6 minutes, then 100% B for 1.0 minute, detection at 254 nm.

The synthetic route of 1H-[1,2,3]Triazole-4-carboxylic acid has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/209352; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Discovery of 16681-70-2

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-[1,2,3]Triazole-4-carboxylic acid, and friends who are interested can also refer to it.

Adding a certain compound to certain chemical reactions, such as: 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16681-70-2, Recommanded Product: 16681-70-2

General procedure: To a stirred solution of 680 mg (1 .78 mmol) (3aR,4S,7R,7aS)-8-{[2-(trifluoro-methyl)phenyl]sulfonyl}octahydro-1H-4,7-epiminoisoindole hydrochloride (1 :1 ) (Intermediate 1) in 10 mL DMF were added 301 mg 1 H-1 ,2,3-triazole-4-carboxylic acid (2.66 mmol, 1 .5 eq), 590 mu 4-methylmorpholine (5.3 mmol, 3 eq) and 1 .01 g HATU (2.66 mmol, 1 .5 eq). After stirring for 16 h at RT, the solution was subjected to preparative HPLC to yield 473 mg (60 %) 1 H-1,2,3-triazol-5-yl[(3aR,4S,7R,7aS)-8-{[2-(trifluoromethyl)phenyl]sulfonyl}octahydro-2H-4,7-epiminoisoindol-2-yl]methanone. LC-MS (Method A1 ): Rt = 0.98 min; MS (ESIpos): m/z = 442 [M+H]+ 1 H NMR (400 MHz, DMSO-d6): delta [ppm] = 1 .40 – 1 .65 (m, 4 H) 2.80 – 3.01 (m, 2 H) 3.1 1 (dd, 1 H) 3.44 (dd, 1 H) 3.93 – 4.10 (m, 1 H) 4.23 (br s, 2 H) 4.39 (br s, 1 H) 7.83 – 7.96 (m, 2 H) 7.98 – 8.07 (m, 1 H) 8.23 – 8.29 (m, 1 H) 8.34 (br s, 1 H) 1H-NMR (400 MHz, DMSO-d6) delta [ppm]: 0.851 (1 .86), 1 .154 (4.18), 1 .171 (8.33), 1 .189 (4.15), 1 .232 (5.06), 1 .352 (1 .25), 1 .476 (3.05), 1 .498 (3.54), 1.545 (3.32), 1 .568 (2.64), 1.907 (4.52), 1 .987 (16.00), 2.006 (1.15), 2.332 (1 .00), 2.518 (4.20), 2.523 (3.25), 2.673 (1 .07), 2.686 (1 .44), 2.727 (2.10), 2.869 (1.54), 2.888 (4.37), 2.900 (1.51), 2.919 (1.42), 2.936 (1.81), 2.950 (1.59), 3.079 (1.93), 3.098 (1.95), 3.112 (2.32), 3.133 (1.78), 3.418 (1.78), 3.437 (1.88), 3.450 (2.13), 3.469 (1.64), 3.987 (3.57), 3.999 (1.42), 4.017 (5.50), 4.021 (3.40), 4.034 (3.49), 4.052 (1.15), 4.229 (4.91), 7.884 (3.44), 7.886 (3.44), 7.894 (3.96), 7.901 (8.45), 7.905 (3.69), 7.913 (4.08), 7.918 (4.32), 7.932 (1.44), 7.936 (1.00), 8.004 (4.86), 8.010 (4.74), 8.022 (2.59), 8.027 (3.37), 8.256 (4.32), 8.261 (3.10), 8.274 (4.15), 8.279 (3.47), 8.342 (1.47).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-[1,2,3]Triazole-4-carboxylic acid, and friends who are interested can also refer to it.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; KOPPITZ, Marcus; SIEBENEICHER, Holger; STEUBER, Holger; TER LAAK, Antonius; NUBBEMEYER, Reinhard; ROTTMANN, Antje; IRLBACHER, Horst; BADER, Benjamin; PETERS, Michaele; WAGENFELD, Andrea; (110 pag.)WO2018/114677; (2018); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Continuously updated synthesis method about 7343-33-1

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromo-1H-1,2,4-triazole, its application will become more common.

Synthetic Route of 7343-33-1,Some common heterocyclic compound, 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, molecular formula is C2H2BrN3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of the intermediate 5 300 mg, potassium carbonate 133 mg and N,N-dimethylformamide 3 mL was added 3-bromo-1H-1,2,4-triazole 132 mg at 0¡ãC. The mixtures were stirred at 0¡ãC for 2.5 hours and to the reaction mixture was added saturated aqueous sodium hydrogen carbonate solution and extracted with ethyl acetate. The organic layers were washed with water and brine and dried over anhydrous sodium sulfate. The resulting organic layers were concentrated under reduced pressure. The resulting residues were subjected to a silica gel column chromatography to give the following present compound 3 370 mg. H1-NMR (CDCl3) delta: 9.04 (1H, s), 8.81 (1H, br s), 8.73 (1H, d), 8.35 (1H, br s), 8.26 (1H, d), 3.92 (3H, s), 3.81 (2H, q), 1.39 (3H, t).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromo-1H-1,2,4-triazole, its application will become more common.

Reference:
Patent; Sumitomo Chemical Company, Limited; TANABE, Takamasa; MIZUNO, Hajime; OKAMOTO, Hiroshi; (41 pag.)US2017/135348; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Continuously updated synthesis method about 27996-86-7

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 27996-86-7, its application will become more common.

Some common heterocyclic compound, 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, molecular formula is C9H7N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C9H7N3O

Weigh 5.73 g (36 mmol) of 2-methyl-8-hydroxyquinoline, 5.19 g (30 mmol)4-(1-1,2,4-triazolyl)benzaldehyde and 100 mL of acetic anhydride,Add to a 250 mL round bottom flask,The reaction is completely dissolved at room temperature,Move to the magnetic heating mixer.Warming up to 145 C,Heating back,TLC tracking.After 5 hours of reaction,Stop the reaction,Cool and stand still,A large amount of yellow solid precipitated in the reaction solution.Atmospheric pressure filtration,Wash the solid three times,drying,Recrystallization of acetonitrile,Obtained a yellow-brown floc product of 5.31g,Yield 49.71%

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 27996-86-7, its application will become more common.

Reference:
Patent; Fuyang Normal College; Liu Jie; Miao Hui; Qiao Rui; Liu Zhaodi; (18 pag.)CN109206405; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-70-2

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 16681-70-2, its application will become more common.

Some common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 1H-[1,2,3]Triazole-4-carboxylic acid

[0838] lH-1,2,3-triazole-4-carboxylic acid (2.3 mg, 20f.tmol) was combined with HATU (7.7 mg, 20 flillOl) in DMF(2 mL) and stirred at room temperature for 15 minutes. Compound3(7.7 mg, 18 flillOl) andDIPEA(9.6 f.LL, 55 f.tmol)werethen added. The solution was stirred at room temperature for15 minutes, at which time LCMS showed reaction completion.The solvent was removed in vacuo and the crude residuewas dissolved in EtOH (2 mL). A solution of IN LiOH (183f.LL, 183 f.tmol) in water was added, and the resulting solutionwas stirred at room temperature for 30 minutes, at which timeLCMS showed reaction completion. The solvent wasremoved in vacuo and the crude residue was purified byreverse phase chromatography to yield Compound a (3 mg) asa TFA salt. MS m/z [M+Ht calc’d for C23H25ClFN50 4 ,490.16. found 488.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 16681-70-2, its application will become more common.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 4-(1,2,4-Triazol-1-yl)aniline

According to the analysis of related databases, 6523-49-5, the application of this compound in the production field has become more and more popular.

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 6523-49-5 as follows. Safety of 4-(1,2,4-Triazol-1-yl)aniline

Step 1 intermediate (310 mg) was treated with DMF-DMA (5 ml) in DMF(3 ml) at 80 for 3 h. The mixture was evaporated, dissolved in toluene and concentrated to a pale yellow solid which was dried overnight. A portion of this material (74 mg) was treated with 4-triazolylaniline (57 mg) in AcOH (1 ml) at 80 for 2 h. The cooled mixture was basified with aq sodium bicarbonate and the resulting precipitate filtered, washed with water, ether and MeCN to give the title compound (88 mg, 59 %). 1H NMR delta 10.5 (IH, brs), 9.26 (IH5 s), 8.87 (IH5 s), 8.59 (3H5 m), 8.23 (IH5 s), 8.1 (3H5 m), 7.84 (5H, m) 7.47 (5H, m), 7.18 (2H, m), 5.29 (2H5 s); LC-MS rt 2.23 m/z472 ES+.

According to the analysis of related databases, 6523-49-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The origin of a common compound about 4-[1,2,4]Triazol-1-yl-benzaldehyde

Statistics shows that 4-[1,2,4]Triazol-1-yl-benzaldehyde is playing an increasingly important role. we look forward to future research findings about 27996-86-7.

Electric Literature of 27996-86-7, These common heterocyclic compound, 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of azolyl ketone (1a/1b) (1 mmol) and aryloxy benzaldehyde (2a-f) (1 mmol) were dissolved in 10% NaOH-EtOH (5 mL), it was stirred at room temperature for 9-10 h. After completion, 5 mL water was added to the reaction mixture. The separated solid compound was filtered and washed with water. It was purified by crystallization with methanol/chloroform or basic alumina column chromatography to give the desired compounds (3-13).The compounds (16-31) were prepared by the reaction of their corresponding aldehyde and ketone partners.

Statistics shows that 4-[1,2,4]Triazol-1-yl-benzaldehyde is playing an increasingly important role. we look forward to future research findings about 27996-86-7.

Reference:
Article; Marrapu, Vijay K.; Chaturvedi, Vinita; Singh, Shubhra; Singh, Shyam; Sinha, Sudhir; Bhandari, Kalpana; European Journal of Medicinal Chemistry; vol. 46; 9; (2011); p. 4302 – 4310;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Continuously updated synthesis method about 5-Bromo-1H-1,2,4-triazole

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7343-33-1, SDS of cas: 7343-33-1

To a 100 mL round bottomed flask, equipped with a stir bar, was added copper(I) iodide (0.397 g, 2.08 mmol), 3-bromo-1H-1,2,4-triazole (4.62 g, 31.2 mmol), and cesium carbonate (6.79 g, 20.83 mmol), as solids. These solids were diluted with anhydrous dimethyl sulfoxide (34.7 mL). Then 1-iodo-4-(trifluoromethoxy)benzene (1.65 mL, 10.4 mmol) was added as a liquid. The flask was placed under nitrogen atmosphere, and the suspension was heated to an internal temperature of 100¡ã C. for 20 hours. The reaction mixture was allowed to cool to room temperature and filtered through a pad of Celite?, washing with excess ethyl acetate (200 mL). The filtrate was poured into a brine solution (200 mL), and the layers were partitioned. The aqueous phase was extracted with additional ethyl acetate (2*100 mL). The combined organic layers were dried over anhydrous magnesium sulfate, filtered, and concentrated. The resulting residue was purified via flash column chromatography using 10-50percent ethyl acetate/hexanes as eluent to afford the title compound as a white solid (1.80 g, 54percent): 1H NMR (400 MHz, DMSO-d6) delta 9.35 (s, 1H), 7.97 (d, J=8.9 Hz, 2H), 7.60 (d, J=8.4 Hz, 2H); 19F NMR (376 MHz, DMSO-d6) delta -57.06; ESIMS m/z 308, 310 ([M+H]+).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; DOW AGROSCIENCES LLC; Fischer, Lindsey G.; Baum, Erich W.; Crouse, Gary D.; DeAmicis, Carl; Lorsbach, Beth; Petkus, Jeff; Sparks, Thomas C.; Whiteker, Gregory T.; US2014/274688; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics