Tag: M.W:100-200

These common heterocyclic compound, 63666-11-5, name is Ethyl 5-amino-4H-[1,2,4]triazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: Ethyl 5-amino-4H-[1,2,4]triazole-3-carboxylate

Method A. To a suspension of 2-(2,3-dihydro-l -benzofuran-5-yl)-l,3-thiazole-4-carboxylic acid (381 mg, 1.54 mmol) and ethyl 5-amino-l,2,4-triazole-3-carboxylate (219 mg, 1.54 mmol) in 5.4 ml dry pyridine at boiling 2-(lH-benzotriazole-l-yl)-l,l53,3-tetramethyluronium hexafluorophosphate (HBTU) (643 mg, 1.70 mmol) was added in portions while solid dissolves gradually; clear solution forms 5 minutes after all 2-(lH-benzotriazole-l-yl)~l, 1,3,3- tetramethyluronium hexafluorophosphate (HBTU) was added. The solution war kept at stirring at 80 C during 15 h. Pyridine was evaporated to dryness, residue was washed with water, an aqueous NaHC03 solution, water, diluted aqueous AcOH and again water. The residue was dissolved in hot N,N-dimethylfonriamide, filtered, filtrate was evaporated to dryness, the residue was treated with boiling ethanol, cooled and filtered off. The procedure was repeated twice after which the residue was washed with ether and dried to give (339 mg, 0.88 mmol, 57 %) pure product. lE NMR (400 MHz, DMSO-c) delta ppm 14.16 (s, 1H, NH), 11.95 (s, 1H, NH), 8.46 (s, 1H, CH-thiazole), 8.08 (s, 1H, CH-Ar), 7.88 (d, J = 8.2 Hz, 1H, CH-Ar), 6.84 (d, J = 8.3 Hz, 1H, CH-Ar), 4.65 (t, J = 8.7 Hz, 2H, OCH2CH2), 4.34 (q, J = 7.0 Hz, 2H, OCH2CH3), 3.30 (t, J = 8.7 Hz, 1H, OCH2CH2), 1.37 (t, J = 7.1 Hz, 3H, OCCH3). LC/MS [M+H]+: 386.0

The synthetic route of Ethyl 5-amino-4H-[1,2,4]triazole-3-carboxylate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; 4SC DISCOVERY GMBH; LEBAN, Johann; ZAJA, Mirko; WO2014/202638; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 4928-87-4

A mixture of l-(7-Amino-5-(-8-azabicyclo[3.2.1]octan-3-yl)-3-(6-phenylpyridin-3- yl)pyrazolo[l,5-a]pyrimidin-6-yl)ethanone (131.4mg, 0.30 mmol), N2H4.H2O (150 ul, 3.0 mmol) in NMP (10 ml) was heated first at 100C for 30 min and then at 200C for 60 min under microwave condition. The mixture was put on rotovap and concentrated at 60C for 2h to remove excess N2H4.H20. lH-l,2,4-triazole-3-carboxylic acid (101.7 mg, 0.90 mmol), EDC (229 mg, 1.20 mmol), HOBt (121.5 mg, 0.90 mmol) and DIEA (521.6 uL, 3.0 mmol) were then added and the mixture was stirred at room temperature for lh. Purification with prep-LC pro ided (( 1 R,3 s,5 S)-3 -(3 -methyl-6-(6-phenylpyridin-3 -yl)- 1 H-dipyrazolo [1,5- a:4′,3′-e]pyrimidin-4-yl)-8-azabicyclo[3.2.1]octan-8-yl)(4H-l,2,4-triazol-3-yl)methanone.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4928-87-4.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MENG, Zhaoyang; PATEL, Mehul, F.; SIDDIQUI, M. Arshad; REDDY, Panduranga Adulla, P.; NAN, Yang; WO2013/16164; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 40253-47-2,Some common heterocyclic compound, 40253-47-2, name is Ethyl 5-methyl-1H-1,2,4-triazole-3-carboxylate, molecular formula is C6H9N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of ethyl 5-methyl-lH-l,2,4-triazole-3-carboxylate (1.0 g, 6.44 mmol) and l-bromo-3-(bromomethyl)benzene (1.77 g, 7.08 mmol) in THF (32 mL), K2CO3 (1.78 g, 12.88 mmol) was added. The mixture was stirred at 50°C for 18 h then filtered. The filtrate was concentrated under reduced pressure and the crude product was purified on a Biotage pre-packed silica gel column with a gradient of 12percent to 100percent EtOAc:Hexanes to afford ethyl l-(3-bromobenzyl)-5-methyl-lH- l,2,4-triazole-3-carboxylate (1.25 g, 60percent) as a viscous oil. MS(ES+) Ci3H14BrN302 requires: 323, 325 found: 324, 326 [M+H]+(l :l).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Ethyl 5-methyl-1H-1,2,4-triazole-3-carboxylate, its application will become more common.

Reference:
Patent; JONES, Philip; DIFRANCESCO, Maria, Emilia; PETROCCHI, Alessia; CARROLL, Christopher, L.; MARSZALEK, Joe; CZAKO, Barbara; JOHNSON, Ryan; THEROFF, Jay; WO2014/31936; (2014); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 4928-87-4, The chemical industry reduces the impact on the environment during synthesis 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, I believe this compound will play a more active role in future production and life.

A solution of intermediate 42 (0.288, 0.58 mmol) was dissolved in 50 mmol of HOBT(: 1 (0.178, 0.89 mmol)EDCl(0.118, 0.83 mmol)After stirring, lH-1,2,4-triazole-3-carboxylic acid (0.078, 0.62 mmol) was added at room temperatureStirring 12h, TLC detection, the end of the reaction, the liquid spin the crude product, the crude product by silica gel G column chromatography [eluent (methanol: dichloromethaneHexane: aqueous ammonia = 50: 500: 1 (nu: nu: nu)] to give 0.23 g of the title compound of Example 30-a, yield 36%

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,2,4-Triazole-3-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Beijing Foreland Pharma Co., Ltd; Zhang, Xingmin; Wang, Ensi; Niu, Shengxiu; Guo, Jing; Dai, Zhuolin; Zheng, Nan; Ji, Qi; Li, Qinyan; Liang, Tie; (109 pag.)CN104411706; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 4-(1,2,4-Triazol-1-yl)aniline

A stirred solution of N’-(4-bromo-2-cyano-phenyl)-N,N-dimethyl-formamidine (0.5g, 2mmol, leq) and 4-[l,2,4]triazol-l-yl-phenylamine (0.32g, 2mmol, leq) in acetic acid (4mL) was heated to reflux for 2 hours then allowed to cool. After cooling, addition of diethylether afforded a yellow precipitate. The precipitate was collected by filtration, washed with diethylether then dried in vacuo to afford the desired compound as the acetate salt. (0.53g, 62%). 1H-NMR (DMSO-^6) delta 1.88 (s, 3H), 7.77 (d, IH), 7.90 (d, 2H), 8.02 (dd, IH), 8.08 (d, 2H), 8.25 (s, IH), 8.68 (s, IH), 8.90 (d, IH), 9.29 (dd, IH), 10.04 (s, IH). LC-MS rt 2.30 m/z 368 ES+.

The synthetic route of 6523-49-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 13423-60-4, The chemical industry reduces the impact on the environment during synthesis 13423-60-4, name is 1-Phenyl-1H-1,2,4-triazole, I believe this compound will play a more active role in future production and life.

General procedure: To a stirred, cooled (0 C) solution of 2,2,6,6-tetramethylpiperidine(0.50 mL, 3.0 mmol) in THF (5 mL) was added BuLi(about 1.6 M hexanes solution, 3.0 mmol). After 15 min at 0 C,ZnCl2TMEDA (0.25 g, 1.0 mmol) was added, and the mixture wasstirred for 15 min at this temperature before introduction of thesubstrate (2.0 mmol). After 2 h at room temperature, a solutionof I2 (0.74 g, 3.0 mmol) in THF (5 mL) was added. The mixturewas stirred overnight before addition of an aqueous saturated solutionof Na2S2O3 (10 mL) and extraction with CH2Cl2 (3 20 mL).The combined organic layers were dried over Na2SO4 and concentratedunder reduced pressure before purification by flash chromatographyon silica gel. 4.4.1 5-Iodo-1-phenyl-1H-1,2,4-triazole (6a) Compound 6a was prepared from 1-phenyl-1H-1,2,4-triazole (2a) using the general procedure 2 and was isolated (eluent: heptane/AcOEt 4:1) in 51% yield as a white powder: mp 109 C; IR (ATR): 3066, 2244, 1598, 1499, 1475, 1364, 1323, 1273, 1165, 994, 908, 761, 730, 693, 666 cm-1; 1H NMR (CDCl3, 300 MHz) 7.54 (br s, 5H), 8.10 (s, 1H); 13C NMR (CDCl3, 75 MHz) 99.8 (C), 126.1 (2CH), 129.4 (2CH), 129.8 (CH), 137.5 (C), 155.0 (CH). HRMS (ASAP): calcd for C8H7IN3 [M+H]+ 271.9685, found 271.9684. Crystal data for 6a (CCDC 1058467). C8H6IN3, M = 271.06, monoclinic, P21/c, a = 6.7529(2), b = 7.2343(2), c = 18.0011(6) A, beta = 95.0770(10), V = 875.95(5) A3, Z = 4, d = 2.055 g cm-3, mu = 3.600 mm-1. A final refinement on F2 with 2000 unique intensities and 109 parameters converged at omegaR(F2) = 0.0636 (R(F) = 0.0252) for 1886 observed reflections with I > 2sigma(I).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Phenyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Nagaradja, Elisabeth; Bentabed-Ababsa, Ghenia; Scalabrini, Mathieu; Chevallier, Floris; Philippot, Stephanie; Fontanay, Stephane; Duval, Raphael E.; Halauko, Yury S.; Ivashkevich, Oleg A.; Matulis, Vadim E.; Roisnel, Thierry; Mongin, Florence; Bioorganic and Medicinal Chemistry; vol. 23; 19; (2015); p. 6355 – 6363;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 27996-86-7, A common heterocyclic compound, 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, molecular formula is C9H7N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of 4-(1 H-1 ,2,4-triazol-1-yl)benzaldehyde (400 mg, 2.28 mmol) in dry MeOH (5 ml_), NaBH4 (93 mg, 2.74 mmol) was added at 0 C and the resulting mixture was stirred at RT for 2 h. After completion of the reaction, ice water was added and the mixture was extracted with EtOAc (2 x 20 ml_). The combined organic layer was washed with brine (2 ml_), dried over Na2S04 and concentrated under vacuum. The resulting crude product was purified by flash chromatography (Eluent: 34% EA in pet ether) to get the title product. Yield: 67% (271 mg, white solid). 1H NMR (400 MHz, DMSO-cfe): d 9.27 (s, 1 H), 9.25 (s, 1 H), 7.78 (d, J = 8.6 Hz, 2H), 7.13 (d, J = 8.6 Hz, 2H), 4.85 (s, 1 H), 3.96 (s, 2H). LCMS: (Method A) 176.1 (M+H), Rt.1.04 min, 99.79% (Max).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ASCENEURON S. A.; QUATTROPANI, Anna; WISHART, Grant; KULKARNI, Santosh S.; RAKESH, Paul; (338 pag.)WO2020/39027; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine, molecular formula is C8H8N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C8H8N4

General procedure: 3-Amino-1,2,4-triazole 8a?f (1.0 mmol), o-hydroxybenzaldehyde9a?e (1.0 mmol), acetone (10) (0.22 ml,3.0 mmol), and abs. EtOH (2 ml) were mixed in amicrowave process vial, and then 4 N solution of HCl indioxane (0.07 ml, 0.3 mmol) was added. The mixture wasirradiated at 150°C for 30 min. The reaction mixture wascooled by an air flow and stirred for 24 h at roomtemperature for complete precipitation of the product. Theprecipitate was filtered off, washed with EtOH (1 ml) andEt2O (3×1 ml), and dried. Compounds 1a?w were obtainedin a form of white solids.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4922-98-9, its application will become more common.

Reference:
Article; Guemue?, Mustafa K.; Gorobets, Nikolay Yu.; Sedash, Yuriy V.; Chebanov, Valentin A.; Desenko, Sergey M.; Chemistry of Heterocyclic Compounds; vol. 53; 11; (2017); p. 1261 – 1267; Khim. Geterotsikl. Soedin.; vol. 53; 11; (2017); p. 1261 – 1267,7;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, A new synthetic method of this compound is introduced below., Application In Synthesis of (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol

To a mixture of (1-methyl-1H-1,2,4-triazol-3-yl)methanol (400 mg, 3.54 mmol) and iodobenzene diacetate (1.25 g, 3.89 mmol) in dichloromethane (10 mL) was added TEMPO ((2,2,6,6-tetramethylpiperidin-1-yl)oxyl) (56 mg, 354 mumop. The mixture was stirred at 15-20 C. for 2 h. The mixture was concentrated in vacuo. The residue was purified by silica gel chromatography (petroleum ether:ethyl acetate=1:2) to give 1-methyl-1H-1,2,4-triazole-3-carbaldehyde (300 mg, 2.70 mmol, 76% yield). 1H NMR (chloroform-d 400 MHz) delta 10.01 (s, 1H), 8.19 (s, 1H), 4.06 (s, 3H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; H. Lundbeck A/S; Juhl, Karsten; Jessing, Mikkel; Langgard, Morten; Vital, Paulo Jorge Vieira; Kehler, Jan; Rasmussen, Lars Kyhn; Clementson, Carl Martin Sebastian; Marigo, Mauro; US2019/185489; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C3H3N3O2

1,2,3-Triazole-4-carboxylic acid (14 mg, 124 mumol), DIPEA (86.3 muL, 496 mumol) and HATU (47.1 mg, 124 mumol) were combined in DMF (0.2 mL) and stirred for 5 minutes at room temperature. This was then combined with (2S,4R)-4-amino-5-biphenyl-4-yl-2-hydroxymethyl-2-methyl-pentanoic acid dimethylcarbamoylmethyl ester (49 mg, 120 mumol). The resulting mixture was stirred for 15 minutes and the reaction was quenched with AcOH. The product purified by preparative HPLC and lyophilized to yield the title compound (51 mg; purity 95%). MS m/z [M+H]+ calc’d for C26H31N5O5, 494.23. found 494.2.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 16681-70-2, its application will become more common.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics