Extended knowledge of 7170-01-6

Statistics shows that 7170-01-6 is playing an increasingly important role. we look forward to future research findings about 3-Methyl-1H-1,2,4-triazole.

7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 7170-01-6

EXAMPLE 103 [4-(3-Methyl-1,2,4-triazol-1yl)-2-trifluoromethyl-phenyl](5H,11H-pyrrolo[2,1-c][1,4]benzodiazepin-10-yl)-methanone To a suspension of 60% sodium hydride in oil (0.3 g) in dimethylformamide (50 ml) was added dropwise 3-methyl-12,4-triazole (0.45 g).. After hydrogen gas evolution ceased, 4-fluoro-2-trifluoromethyl-phenyl-(5H,11H-pyrrolo[2,1-c][1,4]-benzodiazepine-10-yl)-methanone (1.76 g) was added and the reaction mixture was heated in a sand bath at 110 C for 18 hours.. The mixture was poured onto ice, diluted with brine, and extracted with dichloromethane.. The combined extracts were dried over anhydrous sodium sulfate and filtered through a short column of anhydrous sodium magnesium silicate.. The solution was concentrated in vacuo and the residue was triturated with diethyl ether to give 0.81 g of the title compound as colorless crystals, m.p. 148-150 C, MS m/z: 438.2 (M+H)+, 875.8 (2M+H)+.

Statistics shows that 7170-01-6 is playing an increasingly important role. we look forward to future research findings about 3-Methyl-1H-1,2,4-triazole.

Reference:
Patent; Wyeth; EP1000062; (2004); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Brief introduction of 3-Methyl-1H-1,2,4-triazole

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

7170-01-6, A common compound: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

General procedure: In a 10 mL round-bottomed flask, (2S,4R)-4-(2-chloro-4-fluorophenylsulfonyl)-N-(1- cyanocyclopropyl)- 1- (1- (trifluoromethyl)cyclopropanecarbonyl)pyffolidine-2-carboxamide (example 8b)) (400 mg, 788 imol, Eq: 1.00) was combined with DMA (5 mL) to give a colorless solution. 1H-1,2,4-triazole (111 mg, 1.58 mmol, Eq: 2.00) and cesium carbonate (513 mg, 1.58 mmol, Eq: 2.00) were added. The reaction mixture was heated to 80 C and stilTed for 3h. The reaction mixture was poured into water and extracted with EtOAc (2x). The organic layers were combined, washed with saturated aqueous NaHCO3 solution (lx),water (3x) and brine (lx). The organic layers were dried over Na2SO4 and concentrated in vacuo.The crude material was purified twice by flash chromatography (silica gel, 20g, DCM/MeOH 98/2, 19/1) and (silica gel, 20g, Heptan/AcOEt 1/2, 1/3, 1/4) to yield the title compound as a white foam (264 mg; 60%).: _Example 11 was obtained as a byproduct during the synthesis of example 10 as a white solid (34 mg; 7%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HAAP, Wolfgang; KUHN, Bernd; LUEBBERS, Thomas; PETERS, Jens-Uwe; (93 pag.)WO2017/144483; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Simple exploration of 16681-65-5

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 16681-65-5.

16681-65-5, These common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A suspension of 6-bromo-3-chloroisoquinoline (60 mg, 0.25 mmol), 1 -methyl- 1 H-1 ,2,3-triazole (41 mg, 0.50 mmol), Pd(OAc)2 (2.22 mg, 9.9 umol) and KOAc (49 mg, 0.50 mmol) in DMA (4 mL) was stirred at 150^ under microwave irradiation for 60 minutes. The reaction mixture was diluted with brine and extracted with EtOAc. The combined organic layers were washed with water and dried with Na2S04 and concentrated in vacuo. The residue was purified using Biotage silica gel column chromatography eluting with 40% EtOAc in cyclohexane to afford the title compound as a white solid (19 mg, 31 %). 1 H NMR (500 MHz, CDCI3) : delta .17 (t, J = 0.9 Hz, 1 H), 8.15 (dt, J = 8.5, 0.9 Hz, 1 H), 7.94 – 7.85 (m, 2H), 7.82 (d, J = 1 .1 Hz, 1 H), 7.67 (dd, J = 8.5, 1 .6 Hz, 1 H), 4.19 (s, 3H). LCMS (ESI) Rt = 2.00 minutes MS m/z 245 [M+H]+

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 16681-65-5.

Reference:
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; HOELDER, Swen; BLAGG, Julian; CHEUNG, Jack; ATRASH, Butrus; SHELDRAKE, Peter; WO2014/37751; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Extracurricular laboratory: Synthetic route of 41253-21-8

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 41253-21-8, its application will become more common.

Some common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 41253-21-8

To a solution of 2,4-difluorobenzonitrile (10 g, 72 mmol) dissolved in tetrahydrofuran (20 mL), and dimethylformamide (40 mL) was added the sodium salt of 1,2,4-triazole (6.3 g, 70 mmol) and the mixture was stirred at 90 C. for 3 h, filtered and concentrated. The residue was adsorbed onto Silica gel and purified by flash chromatography eluting with 0%-10%-30% ethylacetate/hexanes to give 4-fluoro-2-(1H-1,2,4-triazol-1-yl)benzonitrile as colorless needles (2.46 g, 18%) and 4-(1H-1,2,4-triazol-1-yl)-2-fluorobenzonitril as a white solid (0.746 g, 6%). 4-Fluoro-2-(1H-1,2,4-triazol-1-yl)benzonitrile. Colorless needles (2.46 g, 18% yield) 1H NMR (500 MHz, CDCl3) delta 8.89 (1H, s), 8.19 (1H, s), 7.85 (1H, dd, J=8.7, 5.6 Hz), 7.60 (1H, dd, J=8.8, 2.4 Hz), 7.28-7.24 (1H, m). LCMS (M+H) calcd for C9H6N4F: 189.05; found: 189.13. 4-(1H-1,2,4-Triazol-1-yl)-2-fluorobenzonitrile. White solid (0.746 g, 6% yield) 1H NMR (500 MHz, CDCl3) delta 8.66 (1H, s), 8.15 (1H, s), 7.79 (1H, dd, J=8.5, 6.7 Hz), 7.69 (1H, dd, J=9.5, 1.8 Hz), 7.65-7.63 (1H, m). LCMS (M+H) calcd for C9H6N4F: 189.05; found: 189.13.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 41253-21-8, its application will become more common.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/111984; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Extended knowledge of 16681-65-5

The synthetic route of 16681-65-5 has been constantly updated, and we look forward to future research findings.

16681-65-5, A common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1-Methyl-1H-1,2,3-triazole was prepared according to the literature reference W02008/98104. To a 2 L flask containing 1-methyl-1H-1,2,3-triazole (9 g, 108.3 mmol) was added THF (1500 mL) and the solution was cooled to -40 C. To this colorless homogeneous solution was added n-butyllithium (2.5 M in hexanes, 45 mL, 112.5 mmol) dropwise which immediately afforded a dark brown viscous mixture. The mixture was kept between -10 to -20 C. for 60 minutes, then a THF solution of 2,4-dimethylthiazole-5-carbaldehyde (17.2 g, 121.8 mmol in 200 mL THF) was introduced via cannula. Once the aldehyde was added the reaction was allowed to warm to room temperature. After 3 hours, the reaction was quenched by pouring it into a saturated solution of aqueous NH4Cl. The aqueous portion was extracted with EtOAc in portions, 7*400 mL. The combined organics were washed with brine, dried over MgSO4, filtered and concentrated to afford a brown oil. Chromatography on silica gel (10% acetone-DCM increasing to 50% acetone and increasing to 10% MeOH-DCM) provided the title compound as an amber solid.

The synthetic route of 16681-65-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; US2015/105404; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Discovery of 7170-01-6

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

7170-01-6, A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 2,4-difluorobenzonitrile (7.07 g, 50.8 mmol) and 3-methyl-1H-1,2,4-triazole (4.22 g, 50.8 mmol) in N,N-dimethylformamide (45 ml) was treated with powdered anhydrous potassium carbonate (10 g) and the resulting mixture was stirred at 22 C. for 18 h. The solid was then filtered and the filtrate was concentrated in vacuo. The residue was diluted with ethyl acetate, washed with water and brine, dried over anhydrous magnesium sulfate and concentrated. The mixture containing the 2 and 4-triazolyl-benzonitriles was purified by a combination of chromatography on silica gel (elution gradient of ethyl acetate in hexane) and on reversed phase silica gel to give 1.86 g (18% yield) of Intermediate 5 and 0.526 g (5% yield) of Intermediate 6. Intermediate 5 4-Fluoro-2-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile: White crystals (ethyl acetate/hexanes); mp 117-118 C. 1H NMR (400 MHz, CDCl3) delta: 8.82 (1H, s), 7.84 (1H, dd, J=5.6, 8.6 Hz), 7.62 (1H, dd, J=2.5, 9.1 Hz), 7.24 (1H, m), 2.54 (3H, s). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71. found: C, 59.25; H, 3.32; N, 27.81. Intermediate 6 4-fluoro-2-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile: White crystals (ethyl acetate-hexane); mp 120-121 C. 1H NMR (400 MHz, CDCl3) delta: 8.06 (1H, s), 7.91 (1H, dd, J=5.5, 8.6 Hz), 7.39 (1H, m), 7.30 (1H, dd, J=2.5, 8.1 Hz), 2.56 (3H, s). Anal. Calcd for C10H7FN4: C, 59.4; H, 3.49; N, 27.71. found: C, 59.35; H, 3.70; N, 27.77.

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/112190; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Sources of common compounds: 1H-1,2,3-Triazole

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

288-36-8, A common compound: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

To a soution of 23-dichoro-5-nitropyridine (lOg, 5.18 mmo) and K2003 (1.43 g, 10.4 mmo) in THF (5 m) was added 2H-1,2.3-triazoe (0.360 m, 6.22 mrnoD. The reaction mixture was stirred for overnight at RT. Since the reaction was uncompete, additiona 2H-1,2,3-triazoe (0.300 mL 5.18 mmo) was added and reaction mixture was stirred over2 days at RT. Water was added and the mixture was extracted with AcOEt. The organic ayer was washed with brine, dried over Na2SO4, fi[tered and concentrated under vacuum. The residue taken-up in DCM, the soHd was fHtered off and the fi[trate was evaporated. The residue was purified by flash cournn chromatography on si?ica g& (cycohexane/AcOEt: 1/0 to 7/3) to afford 3-choro-5-nitro-2-(2H-1 2,3-triazo-2- y)pyridine. Rt = 0.75 mm (UPLC Method BI), 1H NMR (400 MHz, DMSO-d6) O ppm:939 (d, IH), 9.15 (d, IH), 833 (s, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; NOVARTIS AG; PISSOT SOLDERMANN, Carole; QUANCARD, Jean; SCHLAPBACH, Achim; SIMIC, Oliver; TINTELNOT-BLOMLEY, Marina; ZOLLER, Thomas; (161 pag.)WO2015/181747; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The origin of a common compound about 16681-65-5

The synthetic route of 16681-65-5 has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. 16681-65-5

A solution of 1-methyl-1H-1,2,3-triazole (12.9 g, 155 mmol) in THF (260 mL) was cooled to -45 C. Maintaining a temperature of <-35 C., n-BuLi (62.1 mL, 2.5 M in hexanes, 155 mmol) was added over 10 minutes. The reaction mixture was stirred for 30 minutes with cooling to -45 C. and then treated with a sub-surface stream of CO2(g) for a period of 2 hours. After flushing the -35 C. slurry with N2(g) for 5 minutes, thionyl chloride (11.8 mL, 163 mmol) was added. The mixture was allowed to warm to room temperature with stirring over 1.25 hours. Addition of N,O-dimethylhydroxylamine hydrochloride (18.14 g, 186 mmol) and N,N-diisopropylethylamine (68.3 mL, 396 mmol) was followed by stirring for 15 hours. Aqueous sodium carbonate (500 mL, 10 wt %) was then added, and the layers were mixed and separated. The aqueous layer was washed with dichloromethane (250 mL and then 125 mL), and the combined organic layers were dried over MgSO4, filtered, and concentrated. The concentrate was taken up in ethyl acetate (225 mL), treated with MgSO4, and filtered through a pad of silica gel (115 g). The silica gel pad was washed with additional ethyl acetate (800 mL). The eluent was concentrated to dryness to provide the title compound as a yellow solid. The synthetic route of 16681-65-5 has been constantly updated, and we look forward to future research findings. Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Sources of common compounds: 3-Methyl-1H-1,2,4-triazole

According to the analysis of related databases, 7170-01-6, the application of this compound in the production field has become more and more popular.

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7170-01-6 as follows. 7170-01-6

A solution of 2,4-difluorobenzonitrile (7.07 g, 50.8 mmol) and 3-methyl-1H-1,2,4-triazole (4.22 g, 50.8 mmol) in N,N-dimethylformamide (45 ml) was treated with powdered anhydrous potassium carbonate (10 g) and the resulting mixture stirred at 22 C. for 18 h. The solid was then filtered and the filtrate concentrated in vacuo. The residue was diluted with ethyl acetate, washed with water and brine, then dried over anhydrous magnesium sulfate and concentrated. The resulting mixture was purified by a combination of chromatography on silica gel (elution gradient of ethyl acetate in hexane) and reversed phase silica gel to yield intermediates 81-84. 4Fluoro-2-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 117-118 C. 1HNMR 400 MHz (CDCl3) delta ppm: 2.54 (3H, s, CH3), 7.24 (1H, m, CH), 7.62 (1H, dd, J=2.5 Hz and J=9.1 Hz, CH), 7.84 (1H, dd, J=5.6 Hz and J=8.6 Hz, CH), 8.82 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71. Found: C, 59.25; H, 3.32; N, 27.81. 4-Fluoro-2-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 120-121 C. 1HNMR 400 MHz (CDCl3) delta ppm: 2.56 (3H, s, CH3), 7.30 (1H, dd, J=2.5 Hz and J=8.1 Hz, CH), 7.39 (1H, m, CH), 7.91 (1H, dd, J=5.5 Hz and J=8.6 Hz, CH), 8.06 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71. Found: C, 59.35; H, 3.70; N, 27.77. 2-Fluoro-4-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 133-134 C. 1HNMR 400 MHz (CDCl3) delta ppm: 2.52 (3H, s, CH3), 7.61 (1H, dd, J=2 Hz and J=9.1 Hz, CH), 7.67 (1H, dd, J=2 Hz and J=9.6 Hz, CH), 7.79 (1H, dd, J=6.5 Hz and J=8.6 Hz, CH), 8.56 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71. Found: C, 59.42; H, 3.24; N, 28.41. 2-Fluoro-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 89-90 C., 1HNMR 400 MHz (CDCl3) delta ppm: 2.69 (3H, s, CH3), 7.49-7.55 (2H, m, 2¡ÁCH), 7.83 (1H, dd, J=6.8 Hz and J=8.8 Hz, CH), 8.00 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71. Found: C, 59.17; H, 3.22; N, 28.01.

According to the analysis of related databases, 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/129379; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Discovery of 1-Methyl-1H-1,2,3-triazole

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows., 16681-65-5

To a flask containing 1-methyl-1H-1,2,3-triazole (275 mg, 3.31 mmol, prepared according to PCT Int. Appl., 2008098104) was added THF (35 mL) and the colorless solution was cooled to -50 C. Then, n-butyllithium (2.5 M in hexanes, 1.2 mL, 3.0 mmol) was added dropwise which afforded a dark reddish-brown viscous solution. The mixture was stirred between -20 to -10 C. for 30 minutes, then a homogeneous THF solution of (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,6-dimethylpyridin-3-yl)methanone (700 mg, 1.44 mmol in 4 mL THF, Intermediate 47: step f) was introduced at 0 C. The reaction mixture became a dark brown color and was allowed to warm gradually to room temperature. The mixture was stirred for 60 minutes at room temperature then quenched with aqueous NH4Cl solution. The aqueous portion was extracted with EtOAc, 3*50 mL. The combined organics were washed with brine, dried over MgSO4, filtered and concentrated to provide a brown oil. Chromatography on silica gel (1% MeOH-DCM increasing to 5% MeOH-DCM) provided the product as a light brown solid. MS m/e 586.1 [M+H]+. 1H NMR (500 MHz, CDCl3) delta ppm 8.13 (d, J=1.8 Hz, 1H), 7.76 (d, J=8.8 Hz, 1H), 7.49 (d, J=8.1 Hz, 2H), 7.37 (d, J=7.9 Hz, 3H), 6.93 (q, J=8.1 Hz, 2H), 6.80 (s, 1H), 5.51 (s, 1H), 4.36-4.22 (m, 2H), 4.07 (s, 3H), 3.90 (s, 3H), 2.49 (s, 3H), 2.32 (s, 3H). Racemic (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,6-dimethylpyridin-3-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol was separated into its individual enantiomers using the following conditions: Chiralcel OD, 20 uM (Diacel) using ethanol with 242 nM detection to give the first eluting enantiomer Example 77B: 1H NMR (500 MHz, CD2Cl2) delta ppm 8.09 (d, J=2.2 Hz, 1H), 7.79 (d, J=8.7 Hz, 1H), 7.51 (d, J=8.1 Hz, 2H), 7.44-7.36 (m, 3H), 6.95 (q, J=8.1 Hz, 2H), 6.85 (s, 1H), 4.34 (s, 2H), 4.07 (s, 3H), 3.90 (s, 3H), 2.49 (s, 3H), 2.31 (s, 3H); and the second eluting enantiomer Example 77C: 1H NMR (500 MHz, CD2Cl2) delta ppm 8.09 (d, J=2.2 Hz, 1H), 7.79 (d, J=8.7 Hz, 1H), 7.51 (d, J=8.1 Hz, 2H), 7.44-7.36 (m, 3H), 6.95 (q, J=8.1 Hz, 2H), 6.85 (s, 1H), 4.34 (s, 2H), 4.07 (s, 3H), 3.90 (s, 3H), 2.49 (s, 3H), 2.31 (s, 3H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics