Tag: M.W=0-100

Reference of 61-82-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of 3-amino-1,2,4-triazole or benzimidazole (1.0 mmol), benzaldehyde (1.0 mmol), dimedone (1.0 mmol), and acetonitrile (5 mL) was taken in a round bottom flask and added iodine (10 mol %) and stirred at 80 C for 10 min. After completion of the reaction, as monitored by TLC, the reaction mass was cooled to room temperature and the solid separated was filtered and washed with water and dried at reduced pressure.Data of representative examples

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,4-Triazol-5-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Puligoundla, Ravinder Goud; Karnakanti, Shuklachary; Bantu, Rajashaker; Nagaiah, Kommu; Kondra, Sudhakar Babu; Nagarapu, Lingaiah; Tetrahedron Letters; vol. 54; 20; (2013); p. 2480 – 2483;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 41 : 5-Fluoro-2-[1 ,2,3]triazol-2-yl-benzoic acid.5-Fluoro-2-[1 ,2,3]triazol-2-yl-benzoic acid. To a solution of 5-fluoro-2-iodo- benzoic acid (3.86 g, 14.65 mmol), 2H-[1 ,2,3]triazole (2.5 g, 36.2 mmol), CS2CO3 (8.62 g, 24.5 mmol), trans-N, N’-dimethyl-cyclohexane-1 ,2-diamine (0.4 ml_), Cul (244 mg) and DMF (13 ml_) were added to a microwave ready vessel and heated to 100 C for 10 min. The mixture was cooled, diluted with water, and extracted with EtOAc. The aqueous layer was acidified and extracted with EtOAc. The organic layer was dried over Na2SO4 and concentrated. The residue was purified by FCC (SiO2, gradient DCM to 10% MeOH/1 %HOAc/DCM) gave the product as a white powder, (2.14 g, 71 %). 1H NMR (400 MHz, CD3OD): 7.91 (s, 2H), 7.76 (dd, J = 8.9, 4.8 Hz, 1 H), 7.59 (dd, J = 8.5, 2.9 Hz, 1 H), 7.49 – 7.42 (m, 1 H).

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; BRANSTETTER, Bryan, James; LETAVIC, Michael, A.; LY, Kiev, S.; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; WO2011/50202; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7170-01-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7170-01-6 as follows.

Example 4; Preparation of Compound C’ from Compound B’ (Example 2); Compound B’ (60.00 g, 0.274 mol) (prepared as in Example 2) was added in portions to a melt of 3-methyl-1,2,4-triazole (113.8 g, 1.369 mol) under argon at 110-120 C. The mixture was heated to about 143 C. and the resulting solution was stirred at 142-44 C. for 17 h. After cooling to 120 C., 1-methyl-2-pyrrolidinone (NMP) (60 mL) was added quickly. The solution was further cooled to about 95 C. and water (300 mL) was added slowly (about 30 min.) keeping the temperature at 85 and 95 C. resulting in crystallization of the product. The slurry was cooled slowly to 0-5 C. and held for about 1 h. The cold slurry was filtered and the cake washed with cold H2O (2¡Á75 mL) then dried in vacuo at 55 C. for 16 h affording 34.5 g Compound C’ as a crystalline, tan solid (54.9%), HPLC AP 98.2. If necessary, the product could be further purified by recrystallization from ethyl acetate. 1H NMR (400 MHz, CDCl3) delta 2.55 (s, 3H), 4.05 (s, 3H), 6.73 (dd, 1H, J=2.9, 2.6), 7.42 (dd, 1H, J=2.9, 2.8), 7.57 (s, 1H), 9.16 (s, 1H), 10.29 (bs, 1H). Anal. Calcd for C11H11N5O: C, 57.63; H, 4.84; N, 30.55. Found: C, 57.37; H, 4.74; N, 30.79.

According to the analysis of related databases, 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Bristol-Myers Squibb Company; US2006/293304; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 584-13-4, These common heterocyclic compound, 584-13-4, name is 4H-1,2,4-Triazol-4-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

Statistics shows that 4H-1,2,4-Triazol-4-amine is playing an increasingly important role. we look forward to future research findings about 584-13-4.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

Example 48 b. 3-methyl-l-(4-nitrophenyl)-lH-l,2,4-triazole3-methyl-lH-l,2,4-triazole (648 mg, 7.8 mmol) and potassium carbonate (2.0 g, 14.2 mmol) were added to a solution of l-fluoro-4-nitro-benzene (1.0 g, 7.1 mmol) in DMF (10 mL). The reaction mixture was heated in a sealed tube at 800C overnight, cooled to room temperature and filtered through a pad of Celite. The solids were washed with dichloromethane and the filtrate was concentrated under reduced pressure. The residue was taken in water and the resultant precipitate was collected by filtration, washed with water and dried under high vacuum to afford 950 mg of the title compound (67 % Yield). 1H NMR (400 MHz, CHLOROFORM-d) delta ppm 2.51 (s, 3 H) 7.83 -7.89 (m, 2 H) 8.36 – 8.41 (m, 2 H) 8.58 (s, 1 H). MS m/z: 205 [M+l]+ .

The synthetic route of 3-Methyl-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; LO-ALFREDSSON, Yvonne; PAULSEN, Kim; RAKOS, Laszlo; ROTTICCI, Didier; WALDMAN, Magnus; WO2010/132015; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below., HPLC of Formula: C2H3N3

The 2 H – 1, 2, 3 – triazole (3.45 g, 50 mmol), 2 – iodo -5 – methyl benzoic acid (5.24 g, 20 mmol), cesium carbonate (11.72 g, 36 mmol), trans – N, N’ – dimethyl – 1, 2 – diaminocyclohexane (0.51 g, 3.6 mmol), cuprous iodide (0.38 g, 2 mmol) and N, N – dimethyl formamide (30 ml) are added to the 100 ml round bottom flask in a single port, under the protection of nitrogen reaction solution gradually raising the temperature to 100 C reaction 4 hours. Stopping the reaction, cooling, liquid water (60 ml) diluted with water and ethyl acetate (200 ml ¡Á 2) extraction. The water layer is acidified to pH concentrated hydrochloric acid for 1 – 2, then adding ethyl acetate (200 ml ¡Á 2) extraction, the resulting organic layer dried with anhydrous sodium sulfate, filtered, filtrate turns on lathe does after separation and purification by column chromatography (dichloromethane/methanol (v/v)=50/1) to obtain the title compound (yellow solid, 2.76 g, 68%).

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Zhang Yingjun; Xue Yaping; Lao Jinhua; Nie Biao; Xu Juan; (35 pag.)CN107759620; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The 1, 2, 3-triazole (3.45g, 50mmol), 2-iodo-5-methyl benzoic acid (5.24g, 20mmol), cesium carbonate (11.72g, 36mmol), trans-N, N ‘-dimethyl -1 , 2-cyclohexanediamine (0.51g, 3. 6mmol), cuprous iodide (0.38g, 2mmol) and N, N-dimethyl formamide (30 ml) are sequentially added to the 100 ml round bottom flask in a single port, the resulting reaction mixture under the protection of nitrogen is gradually heated up to 100 C, reaction 4 hours. Stop the reaction, cooling to room temperature to be reacted, water (150 ml) is diluted, and using ethyl acetate (200 ml ¡Á 2) extraction . Remove organic layer, the aqueous layer with concentrated hydrochloric acid (the mass fraction is 36.5%) acidified to pH to 1-2, then using ethyl acetate (200 ml ¡Á 2) extraction, and combined with the organic layer dried with anhydrous sodium sulfate. Filtering, the filtrate concentrated under reduced pressure, the resulting residue is purified by silica gel column chromatography (dichloromethane / methanol (v / v) = 50/1) to obtain the title compound as yellow solid (2.76g, 68%) .

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong East Sunshine Pharmaceutical Co., Ltd.; Jinchuan, Fei; Gao, Heng; Zhang, Ji; Zhang, Yingjun; (84 pag.)CN105461699; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 74205-82-6,Some common heterocyclic compound, 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, molecular formula is C3H5N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of indolines 6 (1.0 mmol) dissolved in acid (1.0 ml) in an icebath was added (1H-1,2,4-triazol-1-yl)methanol 5 (ammount as given in Table 1). Themixture was then stirred under the temperature and time given in Table 1. After completion of the reaction (TLC), the reaction mixture was poured intoice water, and 20% NaOH solution was added slowly to adjust the pH to 9. The product was extracted with dichloromethane. After removal of the solvent, theresidue was chromatographed over silica gel using dichloromethane-methanol togive 7 (yield as given in Table 1). The analytical and spectroscopic data for 7b and 7c are given below

The synthetic route of 74205-82-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; He, Yi; Li, Xiaolong; Li, Jue; Li, Xiaocen; Guo, Li; Hai, Li; Wu, Yong; Tetrahedron Letters; vol. 55; 29; (2014); p. 3938 – 3941;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 1H-1,2,3-Triazole

Compound 8 was prepared by adapting a procedure described. 13 A degased solution of Pd2(dba)3 (20 mg, 90 mumol) and 2-di-tert-butylphosphino-3,4,5,6-tetramethyl-2′,4′,6′-triisopropyl-1,1′-biphenyl (104 mg, 0.22 mmol) in toluene (6 mL) was heated at 120 C for 5 min and transferred to a degased mixture of K3PO4 (5.1 g, 24 mmol), 1,2,3-triazole (0.83 mL, 14 mmol) and 1-bromo-4-(trifluoromethoxy)benzene (1.8 mL, 12 mmol) in toluene (6 mL). The resulting mixture was heated under argon at 120 C for 24 h. CH2Cl2 (30 mL) was added, the organic phase was washed with NH4Cl-saturated water (10 mL) and brine (10 mL), and the solvent was evaporated. The crude product was purified by chromatography over silica gel (eluent: heptane/AcOEt 95:5) to afford the pure compound in 96% yield as a beige powder: mp <50 C; IR (ATR): 1606, 1511, 1411, 1386, 1251, 1207, 1193, 1152, 1100, 1084, 1056, 962, 949, 921, 852, 821, 731, 664 cm-1; 1H NMR (CDCl3, 300 MHz) 7.32-7.36 (m, 2H), 7.82 (s, 2H), 8.11-8.15 (m, 2H); 13C NMR (CDCl3, 75 MHz) 120.4 (2CH), 120.6 (q, C, J = 256 Hz), 122.0 (2CH), 136.0 (2CH), 138.4 (C), 148.3 (C); 19F NMR (CDCl3, 282 MHz) -58.0. The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings. Reference:
Article; Nagaradja, Elisabeth; Bentabed-Ababsa, Ghenia; Scalabrini, Mathieu; Chevallier, Floris; Philippot, Stephanie; Fontanay, Stephane; Duval, Raphael E.; Halauko, Yury S.; Ivashkevich, Oleg A.; Matulis, Vadim E.; Roisnel, Thierry; Mongin, Florence; Bioorganic and Medicinal Chemistry; vol. 23; 19; (2015); p. 6355 – 6363;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-65-5,Some common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 1-methyl-1H-1,2,3-triazole (12.9 g, 155 mmol) in THF (260 mL) was cooled to -45 C. Maintaining a temperature of <-35 C., n-BuLi (62.1 mL, 2.5 M in hexanes, 155 mmol) was added over 10 minutes. The reaction mixture was stirred for 30 minutes with cooling to -45 C. and then treated with a sub-surface stream of CO2(g) for a period of 2 hours. After flushing the -35 C. slurry with N2(g) for 5 minutes, thionyl chloride (11.8 mL, 163 mmol) was added. The mixture was allowed to warm to room temperature with stirring over 1.25 hours. Then, N,O-dimethylhydroxylamine hydrochloride (18.14 g, 186 mmol) and N,N-diisopropylethylamine (68.3 mL, 396 mmol) were added and the resulting mixture stirred for 15 hours. Aqueous sodium carbonate (500 mL, 10 wt %) was then added, and the layers were mixed and separated. The aqueous layer was washed with dichloromethane (250 mL and then 125 mL), and the combined organic layers were dried over MgSO4, filtered, and concentrated. The residue was taken up in ethyl acetate (225 mL), treated with MgSO4, and filtered through a pad of silica gel (115 g). The silica gel pad was washed with additional ethyl acetate (800 mL). The eluent was concentrated to provide the title compound as a yellow solid. The synthetic route of 16681-65-5 has been constantly updated, and we look forward to future research findings. Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; Jones, William Moore; Goldberg, Steven; US2015/105366; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics