Tag: M.W=0-100

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, A new synthetic method of this compound is introduced below., category: Triazoles

General procedure: A mixture of 1,2,4-triazol-3-amine 1 (1 mmol), aromatic aldehydes2a-o (1 mmol) and 1,3-cyclohexanedione 3 (1 mmol) were taken into a RB flask, irradiated under MW at 150 W for 60 s. The progress ofthe reaction was observed by TLC. After cooling, the reaction mass becamegummy,washed thoroughlywith 1:1 hexane and ethyl ethanoateto afford the compounds 4a-o (Scheme 1).

The synthetic route of 61-82-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sompalle, Rajesh; Arunachalam, Prabhakarn; Roopan, Selvaraj Mohana; Journal of Molecular Liquids; vol. 224; (2016); p. 1348 – 1357;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 584-13-4, A common heterocyclic compound, 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

An EtOH solution of 4-amino-1,2,4-triazole (1.26 g, 15 mmol) and 2-pyridinecarboxaldehyde (1.61 g, 15 mmol) was refluxed for 3 h, a large amount of precipitate of the ligand L was filtered off after cooling and dried under vacuum. Yield 80%, 2.08 g. Anal. Calcd. (%) for C8H7N5: C, 55.49; H, 4.04; N, 40.46. Found: C, 55.53; H, 3.97; N, 40.40. IR (cm-1, KBr pellet): 3094 (s), 1617 (w), 1587 (m), 1503 (s), 1475 (s), 1439 (m), 1392 (w), 1315 (w), 1287 (m), 1223 (m), 1173 (s), 1093 (w), 1058 (s), 995 (m), 982 (w), 964 (w), 939 (w), 869 (m), 781 (s), 760 (w), 743 (m), 622 (s), 521 (m), 505 (w).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Dang, Dong-Bin; Li, Meng-Meng; Bai, Yan; Zhou, Rui-Min; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 103; (2013); p. 101 – 107;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, A new synthetic method of this compound is introduced below., SDS of cas: 61-82-5

General procedure: A mixture of 2-aminobenzimidazole or 3-amino-1,2,4-triazole (1.0 mmol), arylaldehyde (1.0 mmol), dimedone (1.0 mmol), and 15 mol % p-TsOH.H2O was stirred in 5 cm3 acetonitrile as solvent at 40-50 C for the appropriate time (Table 3). The progress of the reaction was monitored by TLC. After completion of the reaction, a thick precipitate was obtained. The solid product was filtered off and washed with acetonitrile and subsequently dried in air. The pure product was characterized by conventional spectroscopic methods.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Mousavi, Mir Rasul; Maghsoodlou, Malek Taher; Monatshefte fur Chemie; vol. 145; 12; (2014); p. 1967 – 1973;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 288-36-8

Intermediate G To a mixture of 2-bromo-4-fluorobenzoic acid (30 g, 137 mmol), cesium carbonate (89.26 g, 274 mmol), and copper(I) iodide (5.27 g, 27.4 mmol) in DMF (200 mL) were added N,N’-dimethylcyclohexane-l,2-diamine (3.7 mL,23.3 mmol) and lH-l,2,3-triazole (18.92 g, 274 mmol). The resulting mixture was stirred at 110 C overnight, cooled, concentrated in vacuo, and diluted with water (150 mL). The aqueous layer was extracted with EtOAc (300 mL x 3). The aqueous layer was acidified with 2 N HC1 and extracted with EtOAc (300 mL x 4). The combined organic layers were washed with brine (150 mL x 3), dried over Na2S04, filtered, and concentrated in vacuo. The residue was purified by silica gel column chromatography gel (petroleum ether : EtOAc = 100: 1 – 5 : 1) to provide the title compound as a solid. LRMS m/z (M+H) 208.0 found, 208.0 required.

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; LIVERTON, Nigel; LUO, Yunfu; (85 pag.)WO2016/100156; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-88-0, name is 1H-1,2,4-Triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C2H3N3

Intermediate 71; 1-Ethyl- IH-I, 2,4-triazole; A solution of DBU (220.2 g, 1.736 moles) in THF (200 ml) was added dropwise to a mechanically stirred suspension of 1, 2,4-triazole (100 g, 1.44 moles) and ethyl iodide (318 g, 2.026 moles) in dry THF (1 L) at 0 C, over a period of 3 hrs via addition funnel. The reaction mixture was allowed to warm to RT and stirred for overnight. The reaction mixture was filtered through celite and washed with THF (2x250ml). The combined filtrates were concentrated and the residue was distilled under reduced pressure to give the product as colorless liquid. (55gm) NMR (400 MHz, CDC13, delta): 1.51(t, 3H), 4.21 (q, 4H), 7.92 (s, IH), 8.05 (s, IH).

The synthetic route of 288-88-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; PEER MOHAMED, Shahul, Hameed; WATERSON, David; WO2010/67125; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, A new synthetic method of this compound is introduced below., Safety of 1-Methyl-1H-1,2,3-triazole

Bis(1-Methyl-1H-1,2,3-triazol-5-yl)methanone A solution of 1-methyl-1H-1,2,3-triazole (0.954 g, 11.4 mmol, prepared according to PCT Int. Appl., 2008098104) in THF (22 mL) was stirred at ?-70 C. under argon while n-BuLi (2.56 M in hexanes, 4.29 mL, 11.0 mmol) was added dropwise over 5 minutes. After stirring for another 5 minutes, a solution of ethyl methoxy(methyl)carbamate (0.665 g, 4.99 mmol) in THF (3 mL) was added dropwise over 5 minutes. After stirring at ?-70 C. for an additional 5 minutes, the cold bath was removed and the light slurry was allowed to warm to room temperature with stirring for 1 hour 20 minutes. The reaction was then quenched at room temperature with 5 M aqueous NH4Cl (3 mL) and the aqueous layer was extracted with THF (1*6 mL). The combined organic layers were dried (Na2SO4), filtered, and concentrated. A portion of the residue was crystallized from ?30 mL toluene to provide, after washing the filter cake with ether (1*3 mL) and heptane (1*3 mL), to yield the title compound as blunt needles.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; Jones, William Moore; Goldberg, Steven; US2015/105366; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-88-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-88-0 as follows.

To a stiffing solution of 4-fluorobenzaldehyde (10.0 g, 80.6 mmol) in DMF (150 mL) were added K2CO3 (13.3 g, 96.7 mmol) and 1,2,4-triazole (6.67 g, 96.7 mmol) and the resultant reaction mixture was stirred at 120 C. for 6 h. After completion of reaction (by TLC), the reaction mixture was diluted with H2O and extracted with EtOAc (3¡Á100 mL). The combined EtOAc layer was washed with H2O and brine, dried over Na2SO4, and concentrated under reduced pressure to afford the title compound as a solid (9.0 g, 65%): mp 145-149 C.: 1H NMR (400 MHz, CDCl3) delta 10.08 (s, 1H), 8.70 (s, 1H), 8.16 (s, 1H), 8.06 (d, J=8.0 Hz, 2H), 7.92 (d, J=8.0 Hz, 2H); ESIMS m/z 173.9 ([M+H]+).

According to the analysis of related databases, 288-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171308; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 41253-21-8, Safety of Sodium 1,2,4-triazol-1-ide

EXAMPLE 1 A mixture of 2,2′-(5-methyl-1,3-phenylene)di(2-methylpropiononitrile), (2.26 g), N-bromosuccinimide (1.78 g), benzoyl peroxide (0.05 g) and carbon tetrachloride (50 ml) was heated under reflux for 2 h, cooled and filtered, and the filtrate was evaporated to dryness under reduced pressure. The residue was dissolved in dimethylformamide (20 ml), sodium triazole (1.8 g) was added, and the mixture was stirred at room temperature for 18 h. Water (100 ml) was added, and the mixture was extracted twice with ethyl acetate. The extracts were combined, dried and evaporated to dryness under reduced pressure, and the residue was purified by flash column chromatography, eluding with ethyl acetate, to give 2,2′-[5-(1H-1,2,4-triazol-1-ylmethyl)-1,3-phenylene]di(2-methylpropiononitrile), mp 81-82 after crystallisation from ethyl acetate/cyclohexane.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Sodium 1,2,4-triazol-1-ide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Imperial Chemical Industries plc; US4935437; (1990); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C3H6N4

(a) Ethyl 3-oxo-3-(pyridin-2-yl)propanoate (400mg, 2.07mmol) was taken in AcOH (10mL) in a 50mL round bottom flask under N2. To it was added 5-methyl-4H-1,2,4-triazol-3-amine (334mg, 2.49mmol). The reaction mixture was heated at 115C for 12h. The reaction mixture was then evaporated to dryness using toluene as an azeotropic solvent and triturated with diethyl ether. This was finally dried under high vaccum which affored 66a as a brown solid (350mg, 75%). This was then used in the next step without any further purification. LCMS(ESI) m/z 226.03 [M-H+]; 56% (purity).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4923-01-7.

Reference:
Article; Zuniga, Edison S.; Korkegian, Aaron; Mullen, Steven; Hembre, Erik J.; Ornstein, Paul L.; Cortez, Guillermo; Biswas, Kallolmay; Kumar, Naresh; Cramer, Jeffrey; Masquelin, Thierry; Hipskind, Philip A.; Odingo, Joshua; Parish, Tanya; Bioorganic and Medicinal Chemistry; vol. 25; 15; (2017); p. 3922 – 3946;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, A new synthetic method of this compound is introduced below., Recommanded Product: 3,5-Diamino-1,2,4-triazole

2-acetylthiophene (8.20 g) and N,N-dimethylformamide diethyl acetal (13.6 mL) were heated to reflux at 130¡ãC in xylene (13 mL) for two days. The reaction liquid was concentrated under reduced pressure, and after subjected to azeotropic distillation with toluene, crystallized with a mixed solvent of toluene-hexane and 3-dimethylamino-1-thiophen-2-ylpropenone (11.52g, yield 98percent) was obtained. The obtained 3-dimethylamino-1-thiophen-2-ylpropenone (10.78 g) was dissolve in toluene (160 mL) and stirred at 100¡ãC with 3,5-diamino-1,2,4-triazole (14.15 g) added. After 10-camphor sulfonic acid (13.82 g) was added, it was heated to reflux for 1.5 hours. After having cooled to room temperature, the supernatant was removed (decantation). The residue was suspended and washed with 5percent sodium carbonate/10percent ethanol aqueous solution, 10percent ethanol water, absolute ethanol and methylene chloride in this order and dried under reduced pressure and the title compound was obtained (8.55 g, yield 66percent).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; NIPPON KAYAKU KABUSHIKI KAISHA; EP1674454; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics