Tag: M.W=0-100

Electric Literature of 41253-21-8,Some common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 2-Chloro-N-(6-alkoxybenzo[d]thiazol-2-yl)acetamide (5 mmol) and sodium 1,2,4-triazole (6 mmol)were dissolved in N,N-dimethylformamide (10 mL) and stirred for 10 h at room temperature. Half of thesolvent was then evaporated, the solution was poured in 50 mL water, and extracted with ethyl acetate(30 mL 3). The ethyl acetate layer was dried over anhydrous MgSO4. After removing the solventunder reduced pressure, the crude product was obtained and recrystallized from dichloromethane toyield a white solid. N-(6-((3-Fluorobenzyl)oxy)benzo[d]thiazol-2-yl)-2-(1H-1,2,4-triazol-1-yl)acetamide (7a). White solid in55.1%. mp: 212-213 C. 1H-NMR (300 MHz, DMSO) delta12.73 (s, 1H, -CO-NH-), 8.59 (s, 1H, triazole-H),8.03 (s, 1H, triazole-H), 7.77-7.64 (m, 2H, Ar-H), 7.52-7.40 (m, 1H, Ar-H), 7.37-7.27 (m, 2H, Ar-H),7.23-7.10 (m, 2H, Ar-H), 5.33 (s, 2H, triazole -CH2-), 5.18 (s, 2H, -OCH2-). 13C-NMR (75 MHz, DMSO) delta166.31, 162.67 (d, J = 243.8 Hz), 156.09, 155.57, 152.04, 146.23, 142.99, 140.38 (d, J = 7.5 Hz), 133.21,130.94 (d, J = 8.4 Hz), 124.07 (d, J = 2.6 Hz), 121.88, 116.15, 115.08 (d, J = 21.0 Hz), 114.77 (d, J = 21.8 Hz),106.59, 69.42, 51.57. IR (KBr) cm1: 1605.72, 1556.78 (C=N). Tof-MS: m/z [M + H]+ 383.65.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Sodium 1,2,4-triazol-1-ide, its application will become more common.

Reference:
Article; Liu, Da-Chuan; Zhang, Hong-Jian; Jin, Chun-Mei; Quan, Zhe-Shan; Molecules; vol. 21; 3; (2016);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7343-34-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 7343-34-2 name is 3,5-Dimethyl-4H-1,2,4-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

5-cWoro-3-(3,5-dimethyl-lH-l,2,4-triazol-l-yl)pyridazine (23-2): To a stirring solution of 3,5-dichloropyridazine (23-1, 5.00 g , 33.5 mmol, 1.0 eq.) in tetrahydrofuran (125 ml) at 0 ¡ãC was added cesium carbonate (17.7 g, 50.3 mmol, 1.5 eq.), followed by 3,5-dimethyl-lH-l,2,4~triazole (3.25 g, 33.5 mmol, 1.0 eq.) in tetrahydrofuran (125 mL) dropwise. The resulting reaction mixture was stirred for 1 hour at the same temperature and then warmed to room temperature and stirred for another 3 hours, then heated to 60 ¡ãC and stirred for 6 hours. The solvent was removed under reduced pressure and the residue was diluted with water (200 mL) and extracted with DCM (3 chi 80 mL). The combined organic layers were dried over Na2S04, filtered and concentrated. The residue was purified by silica gel column chromatography (70percent ethyl acetate in hexanes) to afford 5-chloro-3-(3,5-dimethyl-lH-l,2,4-triazol-l-yl)pyridazine (23-2) as a white solid. 1H NMR (300 MHz, CDC13) delta 9.11 (d, 1H, J= 2.1 Hz), 8.20 (d, 1H, J= 2.1 Hz), 2.96 (s, 3H), 2.43 (s, 3H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,5-Dimethyl-4H-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; DUDKIN, Vadim, Y.; KIM, June, J.; KUDUK, Scott, D.; MCVEAN, Carol; REGER, Thomas; STEEN, Justin; STEELE, Thomas; WO2013/52526; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 49607-51-4, name is 1-Methyl-1H-1,2,4-triazol-3-amine, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C3H6N4

3,4-Dimethylfuran-2,5-dione (550 mg, 4.36 mmol, 1.05 equiv) and 1-methyl-1H-1,2,4-triazole-3-amine (407 mg, 4.15 mmol, 1.00 equiv) were dissolved in concentrated acetic acid (15 ml) and stirred under reflux conditions for 7 h. After cooling to room temperature, water and ethyl acetate were added and the mixture was extracted. The aqueous phase was repeatedly re-extracted vigorously with ethyl acetate, and the combined organic phases were then dried over magnesium sulfate, filtered and concentrated. Final purification by column chromatography of the resulting crude product (gradient ethyl acetate/heptane) gave 3,4-dimethyl 1-(1-methyl-1H-1,2,4-triazol-3-yl)-1H-pyrrole-2,5-dione in the form of a colorless solid (90 mg, 10% of theory). 1H-NMR (400 MHz, d6-DMSO delta, ppm) 8.09 (s, 1H), 3.75 (s, 3H), 2.01 (s, 6H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 49607-51-4.

Reference:
Patent; Bayer CropScience Aktiengesellschaft; Bayer Aktiengesellschaft; FRACKENPOHL, Jens; HELMKE, Hendrik; FRANKE, Jana; REINGRUBER, Anna Maria; MACHETTIRA, Anu Bheemaiah; GATZWEILER, Elmar; ROSINGER, Christopher Hugh; SCHMUTZLER, Dirk; DIETRICH, Hansjoerg; LUEMMEN, Peter; (96 pag.)US2019/330192; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 67545-00-0, name is 4-Amino-1-methyl-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C3H6N4

A solution of (2S,3S)-2-(fluoromethyl)-7-(methylcarbamoyl)-3-phenyl-2,3-d ihydrobenzofuran5-carboxylic acid (80 mg, 0.24 minol) and HATU (111 mg, 0.292 minol) in DMSO (0.85 mL) was treated at rt with DIPEA (0.127 mL, 0.729 minol) and the reaction minxture was stirred at this temperature for 5 min then was treated with 1-methyl-1H-1,2,3-triazol-4-amine (23.8 mg, 0.243minol). The resulting minxture was stirred for 1 h at rt. Further HATU (111 mg, 0.292 minol) and DIPEA (0.127 mL, 0.729 minol) were then added and the reaction minxture left to stir at rt for 5 min before being treated with 1-methyl-1H-1,2,3-triazol-4-amine (23.8 mg, 0.243 minol). The reaction minxture was then stirred for 1 h at rt then was left to stand over the weekend. It was then purified by MDAP (method high pH) to give (2S,3S)-2-(fluoromethyl)-N7-methyl-N5-(1-methyl- 1H- 1,2,3-triazol-4-yl)-3-phenyl-2,3-dihydrobenzofuran-5,7-dicarboxaminde (69.5 mg, 70%) as a yellow solid. LCMS (method forminc): Retention time 0.89 min [M+H] = 410

According to the analysis of related databases, 67545-00-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; ATKINSON, Stephen, John; DEMONT, Emmanuel, Hubert; HARRISON, Lee, Andrew; PRESTON, Alexander, G.; SEAL, Jonathan, Thomas; WALL, Ian, David; WATSON, Robert, J.; WOOLVEN, James, Michael; (214 pag.)WO2017/174620; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, A new synthetic method of this compound is introduced below., name: 1-Methyl-1H-1,2,3-triazole

To a flask containing 1-methyl-1H-1,2,3-triazole (150 mg, 1.81 mmol) was added THF (15 mL) and the colorless homogeneous solution was cooled to -43 C. using a CH3CN-CO2 bath. n-BuLi (2.5M in hexanes, 0.7 mL, 1.75 mmol) was added drop wise via syringe which afforded an opaque mixture. The suspension was stirred at -40 C. for 30 min, then a THF solution of tert-butyl-3-(4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinoline-6-carbonyl)azetidine-1-carboxylate (430 mg, 0.8 mmol, in 2 mL THF, Intermediate 66: step b) was introduced at -40 C. The reaction mixture was allowed to warm gradually to room temperature over 45 min and then quenched with NH4Cl solution. The aqueous portion was extracted with EtOAc (3*30 mL) and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated to provide an amber gum. Chromatography on silica gel (10% acetone-hexane increasing to 30% acetone) afforded the title compound (170 mg) as a white amorphous solid. 1H NMR (500 MHz, CDCl3) delta 8.24 (d, J=2.1 Hz, 1H), 7.78 (d, J=8.8 Hz, 1H), 7.56-7.47 (m, 3H), 7.40 (d, J=8.1 Hz, 2H), 7.35 (dd, J=8.7, 2.1 Hz, 1H), 4.35 (s, 2H), 4.20 (t, J=8.8 Hz, 1H), 4.07 (s, 3H), 4.00 (dd, J=9.3, 5.6 Hz, 1H), 3.92 (dd, J=8.9, 5.7 Hz, 1H), 3.67 (s, 3H), 3.62 (t, J=8.8 Hz, 1H), 3.52-3.38 (m, 1H), 1.38 (s, 9H). MS (ESI): mass calcd. for C30H31ClF3N5O4: 618.06, m/z found 619.9 [M+H]+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-36-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 288-36-8 name is 1H-1,2,3-Triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), Cs2CO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-5, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. Data for A-5: 1HNMR (500 MHz, DMSO-d6) d 12.98 (br s , IH), 8.04 (s, 2H), 7.72-7.45 (m, 3H), 2.41 (s, 3H) ppm.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-1,2,3-Triazole, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; COLEMAN, Paul, J.; SCHREIER, John, D.; WO2010/48014; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 49607-51-4,Some common heterocyclic compound, 49607-51-4, name is 1-Methyl-1H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-chloro-7-isothiocyanate-7-de (acetamide)colchicine (54 mg, 0.12 mmol) was dissolved in DMF (1 mL). 3-amino-1-methyl-1H-1,2,4-triazole (15 mg, 0.12×1.2mmol) was added, and stirred at 80 degrees C overnight. The solvent was distilled off after the reaction. Chloroform was added and washed with saturated sodium bicarbonate solution, dried with magnesium sulfate and the solvent was distilled off. The obtained residue was purified by silica gel column chromatography (Biotage Isolera One, SANP 25 g, chloroform/methanol) to obtain title compound (a yellow solid, 42 mg, 65.8percent) .

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Methyl-1H-1,2,4-triazol-3-amine, its application will become more common.

Reference:
Patent; CHIBA UNIVERSITY; YAKULTHONSHA COMPANY LIMITED; TAKAYAMA, HIROMITSU; YASOBU, NAOKO; KITAJIMA, MARIKO; YAEGASHI, TAKASHI; MATSUZAKI, TAKESHI; NAGAOKA, MASATO; HASHIMOTO, SHUSUKE; NISHIYAMA, HIROYUKI; SUGIMOTO, TAKUYA; ONO, MASAHIRO; (176 pag.)JP5829520; (2015); B2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below., category: Triazoles

[0260] Bromine (11.59 g, 73.35 mmol) was added dropwise to a 0 C solution of 2H-l,2,3-triazole (5.00 g, 72.46 mmol) in water (50 mL), and the resulting solution was allowed to warm to room temperature and stir overnight. The precipitate was collected by filtration and dried to afford 4,5- dibromo-2H-l ,2,3-triazole (8.00 g, 49%) as a white solid. MS (ESI, pos. ion) m/z 228, 226, 230 [M+H]+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BAIR, Kenneth W.; HERBERTZ, Torsten; KAUFFMAN, Goss Stryker; KAYSER-BRICKER, Katherine J.; LUKE, George P.; MARTIN, Matthew W.; MILLAN, David S.; SCHILLER, Shawn E. R.; TALBOT, Adam C.; WO2015/74064; (2015); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of the intermediate 5 500 mg, 60% sodium hydride (dispersion in paraffin liquid) 60 mg and N,N-dimethylformamide 2.5 mL was added 3-methyl-1H-1,2,4-triazole (which was prepared by a method described in US 2006/0293304 A1) 113 mg. The mixtures were stirred at 0C for 2.5 hours. To the reaction mixture was then added saturated aqueous sodium hydrogen carbonate solution and the mixtures were extracted with ethyl acetate. The organic layers were washed with water and brine and dried over anhydrous sodium sulfate. The resulting organic layers were concentrated under reduced pressure. The resulting residues were subjected to a silica gel colunm chromatography to give the present compound 4 153 mg. H1-NMR (CDCl3) delta: 9.03 (1H, s), 8.80 (1H, br s), 8.68 (1H, d), 8.35 (1H, br s), 8.22 (1H, d), 3.92 (3H, s), 3.81 (2H, q), 2.54 (3H, s), 1.39 (3H, t).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Sumitomo Chemical Company, Limited; TANABE, Takamasa; MIZUNO, Hajime; OKAMOTO, Hiroshi; (41 pag.)US2017/135348; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 584-13-4, These common heterocyclic compound, 584-13-4, name is 4H-1,2,4-Triazol-4-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Add 0.033 mol of 4-amino-1,2,4-triazole to 60 mL of water.0.035 mol sodium carbonate, stirred for 10 min in an ice bath,Cyanuric chloride solution was added dropwise in 10 min,Stir at 100 C for 10 hours, cool to room temperature, and filter by suction.Washing three times with water at 5 C, drying at 70 C, to obtain a s-triazine-based fluorescent probe, yield 95%;The cyanuric chloride solution,Are 0.01 mol of cyanuric chloride in 30 mL of 1,4-dioxane mixed solution was obtained.

The synthetic route of 584-13-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; University of Jinan; Wang Zhiling; Kuang Xuan; Cui Yu; Sun Xu; Zhang Yong; (7 pag.)CN108047210; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics