Tag: M.W=0-100

Adding a certain compound to certain chemical reactions, such as: 61-82-5, name is 1H-1,2,4-Triazol-5-amine, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 61-82-5, SDS of cas: 61-82-5

A mixture of aldehyde (1 mmol), dimedone (1 mmol), 3-amino-1,2,4-triazole (1 mmol), and [C4(H-DABCO)2][HSO4]4 (16 mg) washeated in an oil bath (90 C) under solvent-free conditions. Aftercompletion of the reaction, as identified by TLC, using n-hexane:EtOAc (7:3) as the eluent, 10 mL of water was added and stirredfor 10 min. The catalyst was dissolved in water and the solid wasfiltered off and washed with warm EtOH, to obtain the pure targetmolecule.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-1,2,4-Triazol-5-amine, and friends who are interested can also refer to it.

Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-88-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-88-0 as follows.

Example 10; The same procedure and work-up treatment as Example 9 were performed, except that DMF (26.4ml) was used in place of DMSO (26.4ml), to give (2R, 3S)-2-(2,4-difluorophenyl)-3-methyl-2-[(1H-1,2,4-triazol-1-yl)methyl]oxirane (9.3g, yield 37.0%, optical purity (HPLC condition-1) 100% e.e., mp 89C).

According to the analysis of related databases, 288-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Sumitomo Chemical Company, Limited; EP1818332; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, A new synthetic method of this compound is introduced below., Formula: C3H5N3

General procedure: Methyl 2,6-difluoro-4-{[(4-iodophenyl)sulfonyl]amino}benzoate (4.5 g, 9.9 mmol) was dissolved in N-methylpyrrolidone (90 ml), and 1,2,3-triazole (1.50 g, 21.7 mmol), copper(I) iodide (1.20 g, 6.30 mmol), potassium phosphate (6.0 g, 28 mmol), and trans-N,N?-dimethylcyclohexane-1,2-diamine (1.50 g, 10.5 mmol) were added thereto, followed by stirring at 145 C. for 12 hours in the presence of nitrogen gas. After cooling to room temperature, the reaction solution was diluted with water, followed by extraction with ethyl acetate (150 ml¡Á5). The extraction liquids were combined, washed with saturated aqueous sodium chloride, and dried over anhydrous sodium sulfate. Then, the solvent was removed. The obtained residue was purified by silica gel column chromatography (petroleum ether/ethyl acetate=2:1 to 1:1) to obtain methyl 2,6-difluoro-4-({[4-(1H-1,2,3-triazol-1-yl)phenyl]sulfonyl}amino)benzoate (M-17) (650 mg, 17%) and methyl 2,6-difluoro-4-({[4-(2H-1,2,3-triazol-2-yl)phenyl]sulfonyl}amino)benzoate (M-18) (800 mg, 20%). The title compound (252 mg, 4%) was obtained as a white solid by subjecting methyl 2,5-difluoro-4-[(4-iodophenyl)sulfonylamino]benzoate (7.00 g, 15.5 mmol) and 4-methyl-1H-triazole (2.50 g, 30.1 mmol) to the same methods as in Examples 15 to 18. [1338] 1H NMR (400 MHz, DMSO-d6): delta 11.18 (s, 1H), 8.67 (s, 1H), 8.15 (m, 2H), 8.06 (m, 2H), 7.68-7.63 (m, 1H), 7.34-7.29 (m, 1H), 3.80 (s, 3H), 2.33 (s, 3H)

The synthetic route of 27808-16-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AJINOMOTO CO., LTD.; Ueno, Hirokazu; Yamamoto, Takashi; Takashita, Ryuta; Yokoyama, Ryohei; Sugiura, Toshihiko; Kageyama, Shunsuke; Ando, Ayatoshi; Eda, Hiroyuki; Eviryanti, Agung; Miyazawa, Tomoko; Kirihara, Aya; Tanabe, Itsuya; Nakamura, Tarou; Noguchi, Misato; Shuto, Manami; Sugiki, Masayuki; Dohi, Mizuki; US2015/51395; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-36-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-36-8 as follows.

Example 120: Preparation of 4,5-dibromo-lH-pi,2,31triazoleRr Br. BrN^ NH *” ‘ \V NVNH To a solution of IH-[1, 2,3]triazole (1.26 ml, 21.7 mmol) in water (10 ml) at 5tfC, was added bromine (1.5 ml, 29 mmol). The reaction mixture was stirred at 5CPC for 1.5 hours. The white solid (2.375 g) was isolated via filtration and washed with water (5 ml). To the combined filtrates was added more bromine (1.5 ml, 29 mmol). The reaction mixture was stirred at room temperature for 20 hours. More white solid (1.83 g) was isolated via filtration and washed with water (5 ml). To the combined filtrates was added more bromine (1.5 ml, 29 mmol). The reaction mixture was stirred at room temperature for 20 hours. More white solid (375 mg) was isolated via filtration and washed with water (5ml). The white solids were combined and dried to give 4,5-dibromo- IH-[1, 2,3]- triazole (4.92 g, 93percent yield). M.p. 194.7C.

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SYNGENTA LIMITED; WO2007/96576; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 27808-16-8, The chemical industry reduces the impact on the environment during synthesis 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, I believe this compound will play a more active role in future production and life.

Example 74 N-((1S)-2-hydroxy-2-methyl-1-(4-(trifluoromethoxy)phenyl)propyl)-5-(4-methyl-1H-1,2,3-triazol-1-yl)pyrazolo[1,5-a]pyrimidine-3-carboxamide A solution of (S)-5-chloro-N-(2-hydroxy-2-methyl-1-(4-(trifluoromethoxy)phenyl)propyl)pyrazolo[1,5-a]pyrimidine-3-carboxamide (200 mg), 4-methyl-1H-1,2,3-triazole (46.5 mg) and potassium carbonate (97 mg) in N,N-dimethylformamide (2 mL) was stirred at 80 C. for 2 hr. Water was added to the reaction mixture at room temperature, and the mixture was extracted with ethyl acetate. The extract was washed with water and saturated brine, and dried over anhydrous magnesium sulfate. The solvent was evaporated under reduced pressure, and the residue was fractionated by HPLC (C18, mobile phase: water/acetonitrile (0.1% TFA-containing system)). The obtained fraction with a shorter retention time was added saturated aqueous sodium hydrogen carbonate solution, and the mixture was extracted with ethyl acetate. The extract was washed with water and saturated brine, and dried over anhydrous magnesium sulfate. The solvent was evaporated under reduced pressure. The residue was crystallized from hexane/ethyl acetate to give the title compound (37.5 mg).MS (API+): [M+H]+476.2.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Methyl-1H-1,2,3-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; Kawasaki, Masanori; Mikami, Satoshi; Nakamura, Shinji; Negoro, Nobuyuki; Ikeda, Shuhei; Nomura, Izumi; Ashizawa, Tomoko; Imaeda, Toshihiro; Seto, Masaki; Sasaki, Shigekazu; Marui, Shogo; Taniguchi, Takahiko; (130 pag.)US2016/159808; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-36-8, name is 1H-1,2,3-Triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2H3N3

A solution of 5-bromo-2-chloro-6-methylnicotinonitrile (8.5 g, 36.7 mmol), 2H-1,2,3-triazole (5.07 g, 73.4 mmol) and potassium carbonate (15.2 g, 110.2 mmol) in acetonitrile (150 mL) was stirred at 40 C. overnight. The mixture was filtered and washed with ethyl acetate (200 mL*3). The filtrate was concentrated to afford a crude product. The crude product was purified by flash column chromatography over silica gel (eluent: petroleum ether/ethyl acetate from 100/0 to 30/70). The eluent was collected and the solvent was concentrated under reduced pressure to give the product as a yellow solid (7 g, 72% yield). 1H NMR (400 MHz, DMSO-d6) delta ppm 2.71 (s, 3H), 8.31 (s, 2H), 8.90 (s, 1H). LC-MS: (ES, m/z): [M+1]+ 264.0

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Janssen Biotech, Inc.; Lu, Tianbao; Allison, Brett Douglas; Barbay, Joseph Kent; Connolly, Peter J.; Cummings, Maxwell David; Diels, Gaston; Edwards, James Patrick; Kreutter, Kevin D.; Philippar, Ulrike; Shen, Fang; Thuring, Johannes Wilhelmus John Fitzgerald; Wu, Tongfei; (412 pag.)US2018/170909; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2-iodobenzoic acid (3.0 g, 12.1 mmol) in DMF was added 1,2,3- triazole (1.5 g, 21.7 mmol), Cs2C03(7.1 g, 21.7 mmol), Cul (114 mg, 0.6 mmol), and trans-N,K- dimethylc)rclohexane-l,2-diamine (310 mg, 2.2 mmol). After heating at 120 C for 10 min in a microwave reactor, the mixture was cooled to room temperature, diluted with EtOAc, and filtered through Celite. The filtrate was concentrated in vacuo and the crude residue was purified by silica gel chromatography (MeOH in DCM with 0.1% AcOH) to give Intermediate H as the faster eluting isomer. 1H NMR (DMSO-d6 , 500MHz) delta 13.05 (brs, 1 H), 8.12 (s, 2H), 7.81-7.52 (m, 4H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-1,2,3-Triazole, its application will become more common.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; REGER, Thomas, S.; SKUDLAREK, Jason, W.; (0 pag.)WO2016/85784; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 4923-01-7, A common heterocyclic compound, 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3-methyl-1H-1,2,4-triazol-5-amine (4.7747 g, 48.7 mmol, 1 eq.) and 2- bromomalonaldehyde (8.08 g, 53.5 mmol, 1.1 eq.) were dissolved in AcOH (50 ml) and heated15 at 60 C for 18 hours under inert conditions. The reaction mixture was concentrated under vacuo, then the crude material was redissolved in EtOAc and filtered. The filtrate was combined with NaHCO3, and the aqueous layer was extracted with EtOAc (x3). The combined organic extracts were dried over Na2SO4, filtered and concentrated in vacuo. The crude material was absorbed onto silica and purified by column chromatography (Si02, 100% DCM, then 98:2 DCM:MeOH)20 to give 6-bromo-2-methyl-[1,2,4]triazolo[1,5-a]pyrimidine (2.22g, 21%, mlz: 215.1 [M+H]+) as an off-white solid.

The synthetic route of 4923-01-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; GILLESPIE, Robert Jack; HASANE, Ratni; SARIE, Jerome Charles; (89 pag.)WO2016/184832; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, molecular formula is C3H5N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 74205-82-6

Step 2. Preparation of 1-(chloromethyl)-1H-1,2,4-triazole To a solution of (1H-1,2,4-triazol-1-yl)methanol (1.0 g, 10.09 mmol) in dichloroethane (20 ml) thionyl chloride (1.105 ml, 15.14 mmol) was added and the reaction mixture was stirred at 100 C. for 4 hours. The reaction mixture was cooled to 30 C., poured into H2O (25 mL) and extracted with dichloromethane (3*20 mL). The combined organic layers was washed with H2O (50 mL) & brine solution (50 mL), dried over Na2SO4 and evaporated in rotavapor under vacuum to yield 1-(chloromethyl)-1H-1,2,4-triazole (0.570 g, 48%) as brown liquid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 74205-82-6, its application will become more common.

Reference:
Patent; CADILA HEALTHCARE LIMITED; DESAI, Ranjit C.; PINGALI, Harikishore; (40 pag.)US2016/83380; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of compound 10 (500 mg, 1.03 mmol), 4-methylpyridin-2-ol (168 mg, 1.54 mmol) and K2CO3(283 mg, 2.05 mmol) in DMF (5 mL) was stirred at 80 oC for 10 hoursand then concentrated in vacuo to remove DMF. The residue was diluted withwater and extracted with EtOAc. The organic layer was washed with brine, driedover Na2SO4, filtered and concentrated in vacuo. Theresidue was purified by column chromatography (PE : EtOAc = 1 : 1) to give theproduct of 1r (400 mg, yield: 83%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; He, Shuwen; Li, Peng; Dai, Xing; McComas, Casey C.; Du, Chunyan; Wang, Ping; Lai, Zhong; Liu, Hong; Yin, Jingjun; Bulger, Paul G.; Dang, Qun; Xiao, Dong; Zorn, Nicolas; Peng, Xuanjia; Nargund, Ravi P.; Palani, Anandan; Tetrahedron Letters; vol. 55; 14; (2014); p. 2212 – 2216;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics