Tag: M.W=0-100

Related Products of 288-36-8, These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 2 Preparation of 4,5-dibromo-2H-1,2,3-triazole NBS (123 g, 690 mmol), K2CO3 (0.8 g, 5.8 mmol) and IPAc (300 mL) are added into a round bottom flask with the internal temperature of the flask keep at 20 C. Then, 1H-1,2,3-triazole (19 mL, 330 mmol) is slowly added in the flask by keeping internal temperature of the reaction mixture below 40 C. The reaction mixture is stirred at 20 C. for 5 h, and then filtered. The filter cake is washed with IPAc (30 mL), and then the filter cake is discarded. The filtrate is washed with 2% NaS2O3 (100 mL). The solvent of the resulting organic layer is distilled under vacuum and the internal temperature of the solvent is kept below 45 C. After the distillation, the obtained product is recrystallized by hexanes (600 mL). The resulting solid is filtered, and the filter cake is washed with hexanes (60 mL). The resulting solid is dried under vacuum at a temperature of no more than 35 C. to afford 70.8 grams of the product. Other R1 heterocycles as contemplated in the present invention can be brominated via similar preparation procedures as outlined above.

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Boehringer Ingelheim International GmbH; Eriksson, Magnus Carl Arne; Krishnamurthy, Dhileepkumar; Wang, Xiao-Jun; Zhang, Li; US8410091; (2013); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7343-34-2, Computed Properties of C4H7N3

Intermediate 2 4-(3,5-dimethyl-lH-l,2,4-triazol-l-yl)-6-iodo-2-methylpyrimidine (Intermediate 2) A mixture of 4,6-dichloro-2-methylpyrimidine (505 mg, 3.1 mmol), 3,5-dimethyl-lH-l,2,4- triazole (300 mg, 3.1 mmol) and CS2CO3 (1.54 g, 4.7 mmol) in THF (20 mL) was heated at reflux overnight. The mixture was filtered and the filtrate was concentrated to give 4-chloro-6- (3,5-dimethyl-lH-l,2,4-triazol-l-yl)-2-methylpyrimidine that was used without further purification. MS: m/z = 224.1 (M+H). To a mixture of 4-chloro-6-(3,5-dimethyl-lH-l,2,4-triazol-l-yl)-2-methylpyrimidine (2.00 g, 8.9 mmol), KI (4.44 g, 26.8 mmol) was added 57percent aq. HI solution (20 mL, 89.2 mmol). After heating at 70 ¡ãC for 5 min, water (20 mL) was added to the reaction mixture. The white solid was filtered, rinsed with water, and dried under vacuum to give Intermediate 2 as a white solid. XH NMR (400 MHz, DMSO) delta 8.06 (s, 1H), 2.78 (s, 3H), 2.62 (s, 3H), 2.30 (s, 3H). MS: m/z = 316.1 (M+H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,5-Dimethyl-4H-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; MCCOMAS, Casey, C.; REGER, Thomas, S.; WO2014/78216; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 584-13-4, name is 4H-1,2,4-Triazol-4-amine, A new synthetic method of this compound is introduced below., SDS of cas: 584-13-4

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

1455-77-2, name is 3,5-Diamino-1,2,4-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C2H5N5

2-Hydroxybenzaldehyde (0.02 mol L1, 2 mL) in ethanol (10 mL)was added to a magnetically stirred solution of 3,5-diamino-1,2,4-triazole (0.01 mol L1, 0.99 mg) in ethanol (20 mL). The mixture was refluxed for 2 h. The reaction was monitored through TLC.During refluxing yellow precipitates started forming. It was refluxed for another half an hour. It was then cooled to room temperature, filtered, washed with cold ethanol (2 10 mL) thenwith ether (2 5 mL), dried and recrystallized in a mixture of hot ethanol and ether (2:1).2.3. 2-{(E)-[(3-{[(Z)-(2-hydroxyphenyl)methylidene]amino}-1H-1,2,4-triazol-5-yl)imino]methyl}phenol (L)Yield: (1.63 g, 75percent); mp: 244 ¡ãC; color (yellow): IR (cm-1): 3429(OH), 3195 (N-H), 1634 (HC=N), 1604 (C=N) and 1023 (N-N); 1HNMR (ppm DMSO?d6): d 12.81 (s, 1H, NH), 12.14 (s, 1H, OH), 9.16 (s,2H, C7-H, C7,-H), 6.97-7.69 (m, Ar-H); 13C NMR (DMSO?d6):d 157.19 (C8,C8,), 160.67 (C7,C7,), 168.54 (C1, C1,), 117.05-133.93(Ar-C); Mass Spectrum EIMS m/z (percent): 307.31: [M], 308.0(10),277.1(17), 204.1(13), 185.1(100), 171.1(6), 157.0(4). Anal. Calc. for C16H13N5O2 (307.31): C, 62.53 (62.45); H, 4.26 (4.20); N, 22.79(22.72).

The synthetic route of 1455-77-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sumrra, Sajjad Hussain; Kausar, Samia; Raza, Muhammad Asam; Zubair, Muhammad; Zafar, Muhammad Nadeem; Nadeem, Muhammad Arif; Mughal, Ehsan Ullah; Chohan, Zahid Hussain; Mushtaq, Fazila; Rashid, Umer; Journal of Molecular Structure; vol. 1168; (2018); p. 202 – 211;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 3-methyl-lH-l,2,4-triazole (15.0 g, 181 mmol), 1,2- difluoro-4-nitrobenzene (28.7 g, 181 mmol), and sodium bicarbonate (15.2 g, 181 mmol) in DMSO (100 mL) was heated at 80 0C for 48 h . The reaction mixture was allowed to cool to rt and was poured into water (800 mL). The aqueous mixture was extracted with EtOAc (3 x 200 mL). The combined organic extracts were sequentially washed with water (500 mL) and brine solution (100 mL). The organic layer was dried over sodium sulfate, filtered, and concentrated in vacuo. The crude reaction mixture was purified using silica gel chromatography (30-80% EtOAc/hexane, linear gradient) to afford two regioisomeric products. Pure fractions of the less polar regioisomer were combined and concentrated to afford l-(2-fluoro- 4-nitrophenyI)-3-methyl-lH-l,2>;4-triazole (7.2 g, 30.8 mmol, 17 % yield) as an off- white solid. Pure fractions of the more polar regioisomer were combined and concentrated to afford l-(2~fluoro-4-nitrophenyl)-5-methyl-lH-l52,4-triazoIe (6.23 g, 28.0 mmol, 15 % yield) as an off-white solid. Data for l-(2-fluoro-4-nitrophenyl)-5-methyHH-l,2,4-triazole: LC-MS(M+H)+ = 223.1. 1HNMR (500 MHz, chloroform-*/) delta ppm 8.18 – 8.24 (m, 2 H) 8.04 (s, 1 H) 7.69 – 7.78 (m, 1 H) 2.47-2.53 (m, 3 H).Data for 1 -(2-fluoro-4-nitrophenyl)-3 -methyl- 1 H- 1 ,2,4-triazole: LC-MS (M+H)+ = 223.1. 1H NMR (500 MHz, chloroform-tO delta ppm 8.73 (d, J-2.7 Hz5I H), 8.15 – 8.26 (m, 3 H), 2.53 (s, 3 H).

The synthetic route of 3-Methyl-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; MARCIN, Lawrence, R.; THOMPSON, Lorin, A., III; BOY, Kenneth, M.; GUERNON, Jason, M.; HIGGINS, Mendi, A.; SHI, Jianliang; WU, Yong-Jin; ZHANG, Yunhui; MACOR, John, E.; WO2010/83141; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-88-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-88-0 as follows.

Weigh 0.691 g (10 mmol) of 1,2,4-triazole,Para-fluorobenzaldehyde 1.240 g (10 mmol) and anhydrous potassium carbonate 2.760 g (20 mmol) were weighed out,Was dissolved in 25 mL of N, N-dimethylformamide,Add to a thermometer,In a 50 mL four-necked flask equipped with a stirrer,80 under the reaction after 10h stop heating,Filtered to remove potassium carbonate,Ethyl acetate extraction,After the solvent was removed by rotary evaporation,An off-white solid,Recrystallized three times with ethanol,Get pure,Drying at 50 C in vacuo for 6h gave 4- (1-1,2,4-triazolyl) benzaldehyde.

According to the analysis of related databases, 288-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Qilu University of Technology; Duan Hongdong; Xu Ting; Bu Juan; (13 pag.)CN107056716; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below., Safety of 1H-1,2,3-Triazole

Sodium methoxide, prepared from sodium (1.8 g, 79.8 mmol) and methanol (30 ml) was added to a cooled solution of 1 H-1 ,2,3-triazole (5 g, 72.5 mmol) and stirred at O0C for 30 minutes, lodomethane (5 ml, 79.8 mmol) was then added dropwise and the reaction warmed to room temperature and stirred for 24 hours. The reaction was concentrated in vacuo and the residue partitioned between dichloromethane and 1 M aqueous NaOH. The organic extract was dried over MgSO4 and concentrated in vacuo to afford the title compound as a yellow oil (2.5 g, 42% yield). 1HNMR (CDCI3): 4.11 (s, 3H), 7.53 (s, 1 H), 7.69 (s, 1 H)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; PFIZER LIMITED; WO2008/135826; (2008); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 61-82-5,Some common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of aldehyde (1.0 mmol), dimedone (1.0 mmol),1H-1,2,4-triazol-3-amine (1.0 mmol) and nano-AlPO4(SO3H) (0.1 g) was stirred in the acetonitrile (4.0 mL)at 50 C for an appropriate time. After the completion of thereaction as indicated by TLC, dichloromethane was addedto the solidified mixture and the insoluble catalyst was separatedby centrifugation. Evaporation of the solvent from thefiltrate and recrystallization of the solid residue from hot ethanolafforded the pure products in good to excellent yields

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-1,2,4-Triazol-5-amine, its application will become more common.

Reference:
Article; Sharghi, Hashem; Aboonajmi, Jasem; Aberi, Mahdi; Shiri, Pezhman; Journal of the Iranian Chemical Society; vol. 15; 5; (2018); p. 1107 – 1118;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, A common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 2-iodobenzoic acid (3.0 g, 12.09 mmol) in DMF was treated with (1.5 g, 21.7 mmol) 1,2,3-triazole, 7.08 g (21.7 mmol) CsCO3, 114 mg (0.60 mmol) CuI and 310 mg (2.17 mmol) trans-N,N’-dimethylcyclohexane-1,2-diamine. The mixture was heated at 120 C. for 10 min in a microwave reactor. The reaction was cooled to rt, diluted with EtOAc, and filtered through Celite. The residue was purified by gradient elution on SiO2 (MeOH in DCM with 0.1% AcOH) to give the faster eluting desired 2-(2H-1,2,3-triazol-2-yl)benzoyl acid, A-1. Data for A-1: 1HNMR (500 MHz, DMSO-d6) delta 13.05 (br s, 1H), 8.12 (s, 2H), 7.81-7.52 (m, 4H) ppm. The undesired 2-(1H-1,2,3-triazol-2-yl)benzoic acid eluted second.

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bergman, Jeffrey M.; Breslin, Michael J.; Coleman, Paul J.; Cox, Christopher D.; Mercer, Swati P.; Roecker, Anthony J.; US2008/132490; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 584-13-4, A common heterocyclic compound, 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a typical procedure, 3-arylimino-1,2,4-triazoles and 4-arylimino-1,2,4-triazoles 1-25 were synthesized by mixing 3-amino-1,2,4-triazole or 4-amino-1,2,4-triazole (2 mmol), substituted benzaldehydes (2 mmol) and H2SO4 (2 mL) in ethanol (15 mL). The mixtures were refluxed for 4-10 h, while progress of the reaction was monitored through thin layer chromatography. When reaction was completed, solvent was evaporated on a rotary evaporator under reduced pressure and residue was washed with hot hexane. Resulting compounds were crystallized by ethanol to give title compounds in moderate to good yields.

The synthetic route of 584-13-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Khan, Khalid Mohammed; Siddiqui, Salman; Saleem, Muhammad; Taha, Muhammad; Saad, Syed Muhammad; Perveen, Shahnaz; Choudhary, M. Iqbal; Bioorganic and Medicinal Chemistry; vol. 22; 22; (2014); p. 6509 – 6514;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics