Tag: M.W=0-100

Synthetic Route of 288-36-8, A common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In the reactor,Add 90% acetone (volume fraction) 400mL,Stirring,26.2 g of compound (01)Then 34.5 g of potassium carbonate powder was added,0.38 g copper iodide (CuI),1,2,3-triazole.External temperature was raised to 70 ,During the heating process, a large amount of gas is generated,The reaction was stirred at reflux for 5 hours.The reaction mixture was then distilled under reduced pressure at 40 C,When the reaction system is more viscous, add 45mL of water and continue to reduce the steam to distillate without acetone (no acetone in the gas phase). Distilled residue was added 300mL of water, 25% sulfuric acid was added dropwise at room temperature to adjust the pH to 1-2, a yellow suspension.Stir for 30 minutes, filter, and the solids are washed three times with water, 60 mL each. The resulting solid was dried to dryness at 70 C in vacuo,Have pale green solid 19.48g,Compound (1), purity 95.06%.

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; He Bifei; Liu Guangyuan; Fan Yuping; (6 pag.)CN104557744; (2017); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 61-82-5, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

The chemical industry reduces the impact on the environment during synthesis 1H-1,2,4-Triazol-5-amine. I believe this compound will play a more active role in future production and life.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 74205-82-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

Step 2–Preparation of 1-(chloromethyl)-1,2,4-triazole hydrochloride A 4 neck 1 liter flask equipped with condenser, addition funnel and mechanical stirrer was charged 45 gms of 1-(hydroxymethyl)-1,2,4-triazole (0.464 mole) in 500 ml of THF was heating to 40 C. with vigorous stirring. Then SOCl2 (61 ml, 0.84 mole) was added dropwise maintaining the temperature at 45 C. During the addition, a precipitate formed and the mixture was stirred for an additional 2 hours. The product was filtered, washed three times with ethyl acetate and vacuum dried at room temperature. 67.3 gms of product having a melting point of 118-130 C. resulted (94.2% yield).

The synthetic route of (1H-1,2,4-Triazol-1-yl)methanol has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Rohm and Haas Company; US5087635; (1992); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7170-01-6 as follows.

Step 1. Preparation of 3-methyl-1-(4-nitrophenyl)-1H-1,2,4-triazole A mixture of 1-fluoro-4-nitrobenzene (1.54 g, 10.9 mmol), 3-methyl-1H-1,2,4-triazole (1.00 g, 12.0 mmol) and K2CO3 (1.66 g, 12.0 mmol) in DMF (30 ml) was stirred at 75 C. for 12 hours. After being cooled to room temperature, the reaction mixture was concentrated in vacuo. The mixture was dissolved in EtOAc, washed with saturated aq. NaHCO3, dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by column chromatography on SiO2 (Hex:EA=2:1) to give the desired product (0.500 g, 22%) as a brown solid. 1H NMR (400 MHz, CDCl3) delta 2.52 (3H, s), 7.85-7.88 (2H, m), 8.37-8.40 (2H, m), 8.58 (1H, s). LC-MS m/z=205.0 [M+H]+.

According to the analysis of related databases, 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CHEMIZON, A DIVISION OF OPTOMAGIC CO., LTD.; US2012/53180; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-88-0, name is 1H-1,2,4-Triazole, This compound has unique chemical properties. The synthetic route is as follows., Safety of 1H-1,2,4-Triazole

Example 91 Preparation of 4-(1H-1,2,4-triazol-1-yl)benzaldehyde (DI5) To a stirring solution of 4-fluorobenzaldehyde (10.0 g, 80.6 mmol) in DMF (150 mL) were added K2CO3 (13.3 g, 96.7 mmol) and 1,2,4-triazole (6.67 g, 96.7 mmol) and the resultant reaction mixture was stirred at 120 C. for 6 h. After completion of reaction (by TLC), the reaction mixture was diluted with water and extracted with EtOAc (3*100 mL). The combined EtOAc layer was washed with water and brine, dried over Na2SO4, and concentrated under reduced pressure to afford the title compound as a solid (9.0 g, 65%): mp 145-149 C.: 1H NMR (400 MHz, CDCl3) delta 10.08 (s, 1H), 8.70 (s, 1H), 8.16 (s, 1H), 8.06 (d, J=8.0 Hz, 2H), 7.92 (d, J=8.0 Hz, 2H); ESIMS m/z 173.9 ([M+H]+).

According to the analysis of related databases, 288-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171314; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, A new synthetic method of this compound is introduced below., Recommanded Product: 16681-65-5

To a flask containing 1-methyl-1H-1,2,3-triazole (160 mg, 1.93 mmol) was added THF (12 mL) and the colorless solution was cooled to -43 C. using a CH3CN-CO2 bath. Then, n-BuLi, (2.5 M in hexanes, 0.72 mL, 1.8 mmol) was added which afforded an opaque white suspension. The suspension was stirred at -40 C. for 20 minutes, then a homogeneous solution of (2-chloro-4-methoxy-3-(2,2,2-trifluoroethyl)quinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (350 mg, 0.88 mmol, Intermediate 59: step c) in 5 mL THF, was introduced at -40 C. The reaction mixture was allowed to warm gradually to 0 C. over 25 minutes, then quenched with aqueous NH4Cl solution. The aqueous portion was extracted with EtOAc (3*35 mL). The combined organics were washed with brine, dried over Na2SO4 and MgSO4, filtered and concentrated to give a brown solid. Chromatography on silica gel (3% MeOH-DCM increasing to 10% MeOH) provided the title compound as a tan amorphous solid. 1H NMR (500 MHz, CD3OD) delta ppm 8.22 (d, J=1.8 Hz, 1H), 8.05 (d, J=8.9 Hz, 1H), 7.70 (dd, J=8.9, 2.0 Hz, 1H), 7.48 (s, 1H), 6.91 (s, 1H), 4.09 (s, 3H), 4.03-3.89 (m, 5H), 3.69 (s, 3H), 2.66 (s, 3H). MS (ESI): mass calcd. for C21H20ClF3N6O2, 480.1. found, 481.1 (M+H)+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1455-77-2, Recommanded Product: 3,5-Diamino-1,2,4-triazole

solution of 9.Og 3,5-diamino-1 ,2,4-thazole and 22.4ml diethyl phenylmalonate in N,N-dibutylbutan-1-amine is heated under microwave irradiation to 1800C for 8h. The reaction mixture forms two layers after cooling to room temperature. The top layer is removed and the solvent of the lower layer is evaporated. The residue is treated with water and acidified with 5N HCI. The precipitated product is collected by filtration and dried. The crude product is used without further purification. MS (M+1 ): 244

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; BAYER SCHERING PHARMA AKTIENGESELLSCHAFT; WO2009/21992; (2009); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 61-82-5, A common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of aldehyde (1 mmol), dimedone (1 mmol), 3-amino-1,2,4-triazole (1 mmol), and [C4(H-DABCO)2][HSO4]4 (16 mg) washeated in an oil bath (90 C) under solvent-free conditions. Aftercompletion of the reaction, as identified by TLC, using n-hexane:EtOAc (7:3) as the eluent, 10 mL of water was added and stirredfor 10 min. The catalyst was dissolved in water and the solid wasfiltered off and washed with warm EtOH, to obtain the pure targetmolecule.

The synthetic route of 61-82-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7343-34-2,Some common heterocyclic compound, 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole, molecular formula is C4H7N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Under an atmosphere of argon, (2S,4R)-N-(1-cyanocyclopropyl)-4-(4-fluorophenylsulfonyl)- 1- (1- (trifluoromethyl)cyclopropanecarbonyl)pyffolidine-2-carboxamide (example 33, step b, 0.1 g, 211 imol) was combined with N,Ndimethylacetamide (2.00 mL) to give a colorless suspension. 3,5-Dimethyl-1H-1,2,4- triazole (41.0 mg, 422 imol) and cesium carbonate (138 mg, 422 imol) were added.The reaction mixture was stirred over the weekend at ambient temperature. The crude materialwas purified by preparative HPLC (Zorbax Eclipse XDB-C18; 21,2x50mm; flow: 25 mL/min; gradient: acetonitrile / water (+0.1percent formic acid) = (95percent-5percent to 5percent-95percent) in 6 mm; collected by 254 nm detector) to yield the title compound as a colorless viscous oil (13.2 mg, 11.4 percent). mlz = 551.17 [M+H41.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3,5-Dimethyl-4H-1,2,4-triazole, its application will become more common.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HAAP, Wolfgang; KUHN, Bernd; LUEBBERS, Thomas; PETERS, Jens-Uwe; (93 pag.)WO2017/144483; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 61-82-5, The chemical industry reduces the impact on the environment during synthesis 61-82-5, name is 1H-1,2,4-Triazol-5-amine, I believe this compound will play a more active role in future production and life.

General procedure: A mixture of aromaticaldehyde (1.0 mmol) and dimedone(1.0 mmol) with 2-aminobenzimidazole or 3-amino-1,2,4-triazole (1.0 mmol) was stirred in acetic acid (5 mL) at 60 Cfor the appropriate time (Tables 3, 4). The progress of thereaction was monitored by TLC. After completion of thereaction, a thick precipitate was obtained. The solid productwas filtered off and washed with acetic acid (3 ¡Á 2 mL) togive the pure products 4 and 6, and subsequently dried in air.The pure products were characterized by conventional spectroscopicmethods. Physical and spectral data for the compounds,4b, 4c, 4h, 4j, 6a, 6c, and 6h are represented below:

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,4-Triazol-5-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Mousavi, Mir Rasul; Maghsoodlou, Malek Taher; Hazeri, Nourallah; Habibi-Khorassani, Sayyed Mostafa; Journal of the Iranian Chemical Society; vol. 12; 8; (2015); p. 1419 – 1424;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics