Tag: M.W=0-100

Application of 16681-65-5,Some common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The title compound was prepared according to the patent application WO2008/135826. To a 50 mL 2-necked flask containing 1-methyl-1H-1,2,3-triazole (1.0 g, 12.0 mmol, prepared according to PCT Int. Appl., 2008098104) was added THF (45 mL) and the colorless solution was cooled to -40 C. Then, n-BuLi (2.5 M in hexanes, 4.8 mL) was added dropwise which afforded a dark reddish-brown viscous solution. The mixture was stirred between -30 to -20 C. for 45 minutes, then neat DMF (3 mL, 38.5 mmol) was introduced at -10 C. The mixture was allowed to warm up to room temperature and stirred for 60 minutes, followed by pouring into water. The aqueous portion was extracted with EtOAc (4*50 mL) and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated. The aqueous portion was back-extracted with DCM (3*50 mL) and dried as above. The combined organics were concentrated to give a light brown oil that was much more UV active than the starting material. TLC in either 25% CH3CN-DCM or 25% EtOAc-DCM showed the product to have a slightly higher Rf than the starting material. Chromatography on silica gel (100% DCM increasing to 25% CH3CN-DCM) provided the titled material as a colorless oil.

The synthetic route of 16681-65-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-36-8, name is 1H-1,2,3-Triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

The 2 H – 1, 2, 3 – triazole (3.45 g, 50 mmol), 2 – iodo -5 – methyl benzoic acid (5.24 g, 20 mmol), cesium carbonate (11.72 g, 36 mmol), trans – N, N’ – dimethyl – 1, 2 – diaminocyclohexane (0.51 g, 3.6 mmol), cuprous iodide (0.38 g, 2 mmol) and N, N – dimethyl formamide (30 ml) are added to the 100 ml round bottom flask in a single port, under the protection of nitrogen reaction solution gradually raising the temperature to 100 C reaction 4 hours. Stopping the reaction, cooling, liquid water (60 ml) diluted with water and ethyl acetate (200 ml ¡Á 2) extraction. The water layer is acidified to pH concentrated hydrochloric acid for 1 – 2, then adding ethyl acetate (200 ml ¡Á 2) extraction, the resulting organic layer dried with anhydrous sodium sulfate, filtered, filtrate turns on lathe does after separation and purification by column chromatography (dichloromethane/methanol (v/v)=50/1) to obtain the title compound (yellow solid, 2.76 g, 68%).

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Zhang Yingjun; Xue Yaping; Lao Jinhua; Nie Biao; Xu Juan; (35 pag.)CN107759620; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 61-82-5, A common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

The synthetic route of 61-82-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8, Formula: C2H3N3

To a solution of lH-l,2,3-triazole (5.0 g, 72.3 mmol) and K2CO3 (9.1 g, 65.8 mmol) in acetone at 560C was added benzyl bromide (7.8 ml, 65.8 mmol) drop wise over 90 minutes. The reaction mixture was heated at reflux for a further Ih, cooled to room temperature and quenched with distilled water (4 ml). Acetone was evaporated in vacuo and the remaining aqueous phase back extracted with DCM (3 x 20 ml). The combined organic layers were dried (MgStheta4), filtered and concentrated in vacuo to provide the title compound (9.8 g, 94% yield) as off-white solid. LCMS data: Calculated MH+ (160); Found 97% MH+ m/z (160), Rt = 1.44 mins.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; EVOTEC NEUROSCIENCES GMBH; WO2009/95394; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 1455-77-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: 2-Naphthalenesulfonyl chloride (60 mmol, 13.5 g) was slowlyadded to a solution containing 5-amino-1,2,4-triazole (60 mmol,5.04 g) (for anstrz synthesis) or 3,5-diamino-1,2,4-triazole (60 mmol,5.95 g) (for danstrz synthesis) and pyridine (60 mmol, rho = 0.978 g/mL,4.85 mL) in 100 mL of acetonitrile (dry) under a N2 atmosphere at55 ¡ãC. Then, the temperature reaction was raised to 85 ¡ãC and themixture stirred for 16 h. Afterwards, the mixture was brought toroom temperature and later on placed in an ice bath for 1 h. Thesolid was filtered, washed with water and dichloromethane, anddried to constant weight.

The chemical industry reduces the impact on the environment during synthesis 3,5-Diamino-1,2,4-triazole. I believe this compound will play a more active role in future production and life.

Reference:
Article; Herna?ndez-Gil, Javier; Ferrer, Sacramento; Cabedo, Nuria; Lo?pez-Gresa, Mari?a Pilar; Castin?eiras, Alfonso; Lloret, Francesc; Journal of Inorganic Biochemistry; vol. 125; (2013); p. 50 – 63;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 1H-1,2,3-Triazole

A solution of 2-bromo-3-thiophene carboxylic acid (1.50 g, 7.24 mmol), 1H-1,2,3-triazole (0.600 g, 8.69 mmol), potassium carbonate (2.00 g, 14.5 mmol), and copper iodide (0.138 g, 0.724 mmol) in DMF (36.2 mL) was sparged with nitrogen and heated to 75C for 96 h. The cooled reaction mixture was diluted with water, washed with ether, and acidified with cone. HCl. The acidic aqueous solution was extracted 3x with EtOAc and the combined organic fractions washed with brine, dried over MgS04, filtered, and concentrated in vacuo. The crude material was purified by silica gel chromatography [0-70% (1% acetic acid in EtOAc) in hexanes], to provide the title compound as an off-white solid. LRMS m z (M+H) 196.2 found, 196.1 required.

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; BESHORE, Douglas C.; KUDUK, Scott D.; LUO, Yunfu; MENG, Na; YU, Tingting; WO2015/18027; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8, HPLC of Formula: C2H3N3

To a mixture of the product from step 2 (7.9 g, 38 mmol), Cs2C03 (24.8 g,76 mmol) and Cul (2.88 g, 7.6 mmol) in DMF (200 mL) were added 2H-[l,2,3]triazole (5.24 g,76 mmol) and N,N’-dimethyl-cyclohexane- 1,2-diamine (0.9 g, 6.5 mmol) and the mixture was stirred at 110 C overnight. The cooled mixture was adjusted to pH ~12 with 1M sodium hydroxide and extracted withEtOAc (50 mL x 3). The aqueous layer was adjusted to pH ~4 with 1M HC1 and extracted with EtOAc (50 mLx4). The extracts were dried over Na2S04, filtered, the filtrate concentrated in vacuo and the residue purified by chromatography on silica (Petroleum ether:EtOAc =10:1) to provide the title compound. LRMS m/z (M+H) 196.0 found, 196.0 required.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; KUDUK, Scott D.; BESHORE, Douglas; LUO, Yunfu; MENG, Na; YU, Tingting; (114 pag.)WO2016/65585; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, Safety of 3-Methyl-1H-1,2,4-triazole

2-(5-Bromo-1-methyl-1H-imidazol-2-yl)-6-chloro-3-(ethylsulfonyl)pyridine (200 mg, 0.55 mmol, 1.0 eq) was dissolved in 42 dimethylformamide (5 ml), and 50% 41 sodium hydride (32 mg, 0.66 mmol, 1.1 eq) was added. Subsequently, the mixture was cooled to 0 C. 70 3-methyl-1H-1,2,4-triazole (50 mg, 0.61 mmol, 1.1 eq) was added thereto, and then stirred overnight at room temperature. The aforementioned reaction solution was added to a saturated aqueous solution of 48 sodium hydrogen carbonate, and extraction with ethyl acetate was carried out. The obtained organic layer was washed with water and a saturated aqueous solution of 24 sodium chloride, dried over anhydrous magnesium sulfate, and filtered. The filtrate was concentrated under reduced pressure, and the obtained residue was purified by column chromatography with silica gel. Thereby, the objective 71 product was obtained in an amount of 91 mg (yield 40%).1H-NMR of the obtained objective product is shown below. 1H-NMR (400 MHz, CDCl3) delta: 9.04 (1H, s), 8.61 (1H, d), 8.07 (1H, d), 7.17 (1H, s), 3.84 (2H, q), 3.65 (3H, s), 2.53 (3H, s), 1.35 (3H, t).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Nippon Soda Co., Ltd.; SAKANISHI, Keita; IWASA, Takao; AOYAMA, Hikaru; SAKIYAMA, Norifumi; USHIJIMA, Daisuke; MATSUI, Maki; KOBAYASHI, Tomomi; US2019/185459; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, Computed Properties of C3H5N3

4-Fluoro-2-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile and 4-fluoro-2-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. A solution of 2,4-difluorobenzonitrile (7.07 g, 50.8 mmol) and 3-methyl-1H-1,2,4-triazole (4.22 g, 50.8 mmol) in N,N-dimethylformamide (45 ml) was treated with powdered anhydrous potassium carbonate (10 g) and the resulting mixture was stirred at 22 C. for 18 h. The solid was then filtered and the filtrate was concentrated in vacuo. The residue was diluted with ethyl acetate, washed with water and brine, dried over anhydrous magnesium sulfate and concentrated. The mixture containing the 2 and 4-triazolyl-benzonitriles was purified by a combination of chromatography on silica gel (elution gradient of ethyl acetate in hexane) and on reversed phase silica gel to give 1.86 g (18% yield) of 4-Fluoro-2-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile and 0.526 g (5% yield) of 4-fluoro-2-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. 4-Fluoro-2-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate/hexanes). mp 117-118 C. 1HNMR 400 MHz (CDCl3) delta (ppm): 2.54 (3H, s, CH3), 7.24 (1H, m, CH), 7.62 (1H, dd, J=2.5 Hz and J=9.1 Hz, CH), 7.84 (1H, dd, J=5.6 Hz and J=8.6 Hz, CH), 8.82 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71. Found: C, 59.25; H, 3.32; N, 27.81. 4-fluoro-2-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane). mp 120-121 C. 1HNMR 400 MHz (CDCl3) delta (ppm): 2.56 (3H, s, CH3), 7.30 (1H, dd, J=2.5 Hz and J=8.1 Hz, CH), 7.39 (1H, m, CH), 7.91 (1H, dd, J=5.5 Hz and J=8.6 Hz, CH), 8.06 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71. Found: C, 59.35; H, 3.70; N, 27.77.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/129379; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7343-34-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

(c) Preparation of 1-decyl-3,5-dimethyl-1,2,4-triazole A mixture of 3,5-dimethyl-1,2,4-triazole (6.0 parts; 0.062 mol ex (b) above) and 1-bromodecane (14.4 parts; 0.065 mol) in dimethylformamide (16 ml) was heated together at 120¡ã C. for 23 hours. The cooled reaction mixture was diluted with water (100 ml), a solution of sodium hydroxide (2.62 parts; 0.065 mol) in water (100 ml) added, and the product extracted into ether (3*50 ml). After drying over magnesium sulphate the solution was evaporated to yield a pale yellow oil (3.3 parts; 22percent theory). Infra red analysis: vmax (film): 2923, 2853, 1515, 1341, 701cm-1. Proton NMR: delta(CDCl3; 0.9(t,3H); 1.2-1.4(m,14H); 1.7-1.9(m,2H); 2.3(s,3H); 2.4(s,3H); 4.0(t,2H)ppm. Mass spec: m/z(Br): 238(M+H+, 100percent).

The synthetic route of 3,5-Dimethyl-4H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zeneca Limited; US5620595; (1997); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics