Tag: M.W=0-100

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, A new synthetic method of this compound is introduced below., COA of Formula: C2H5N5

Included at room temperature3,5-diamino-1,2,4-triazole 15.6 g (0.157 mol)And dehydrated N,N-dimethylformamide 100mLAdd 53.5 g (0.157 mol) of 20percent sodium ethoxide ethanol solution to the suspension.After heating to 55~60 ¡ã C and stirring for 20 minutes,37.9 g (0.157 mol) of 3-chloropropyltriethoxydecane was added.Stir at 87~90 ¡ã C for 6 hours.After cooling the suspension reaction solution to 3 ¡ã C,Filter out insoluble matter,And the solvent of the filtrate is distilled off under reduced pressure,Obtained 42.3 g of brown viscous material (0.139 mol,Yield 88.8percent).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SHIKOKU CHEMICALS CORPORATION; MURAI,, TAKAYUKI; TANIOKA, MIYA; IIDA, SHUSAKU; KATSUMURA, MASATO; YAMAJI, NORIAKI; IMAMINE, TAKAHITO; TSUJINO, MASAHIKO; HIRAO, HIROHIKO; (52 pag.)TW2018/41929; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 584-13-4, name is 4H-1,2,4-Triazol-4-amine, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 584-13-4, HPLC of Formula: C2H4N4

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4H-1,2,4-Triazol-4-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of Sodium 1,2,4-triazol-1-ide

a stirrer after replacement with nitrogen,Add the thermometer and condenser to the reaction bottle1-(4-chlorophenyl)-4,4-dimethyl-3-butanone100g,Trimethyl thionyl chloride 63g,28 g of potassium hydroxide and 100 g of dimethyl sulfoxide (DMSO) and stirred.After 40 C reaction to 1 – (4 – chlorophenyl) – 4,4 – dimethyl -3 – pentanone reaction,Add sodium triazole sodium 60g, react at 120 C,After the reaction, desolvation, add 100 g of methylcyclohexane, and wash with 30 g of water.Layering at 70 C, recrystallization from water at 25 C,After suction filtration, the mixture was dried to obtain 130 g of tebuconazole, the yield was 91%, and the purity was 96%.

The synthetic route of Sodium 1,2,4-triazol-1-ide has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Jiangsu Qi Zhou Green Chemical Co., Ltd.; Wu Tianyu; Liu Yuchao; Tao Yachun; Cai Junyi; Wang Hai; (6 pag.)CN109336848; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1455-77-2, Application In Synthesis of 3,5-Diamino-1,2,4-triazole

The specific steps are as follows: 4 (3.34 g, 10 mmol) is dissolved in a mixture of methanol (10 ml) and acetonitrile (10 ml) at room temperature.Add two equivalents of an aqueous solution of 3,5-diamino-1,2,4-triazole for 2 h.Solid precipitated, filtered, washed with acetonitrile,The target product was obtained in a yield of 88.6percent.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,5-Diamino-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Patent; Nanjing University of Science and Technology; Lin Qiuhan; Sun Qi; Lu Ming; Wang Pengcheng; (9 pag.)CN108689959; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 61-82-5, These common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a mixture of dimedone (1 mmol), aldehyde (1 mmol), 2-aminobenzimidazole or 3-amino-1,2,4-triazole (1 mmol)and nano-SiO2 (15 mol %) in the acetonitrile (5 mL) was stirred for appropriate time (Table 2) at 25-30 C. After the completion of the reaction as indicated by TLC, dichloromethane (CH2Cl2) was added to the solidified mixture and the insoluble catalyst was separated by filtration. Evaporation of the solvent from the filtrate and recrystallization of the solid residue from hot ethanol afforded the pure products in high yields.

Statistics shows that 1H-1,2,4-Triazol-5-amine is playing an increasingly important role. we look forward to future research findings about 61-82-5.

Reference:
Article; Mousavi, Mir Rasul; Maghsoodlou, Malek Taher; Journal of the Iranian Chemical Society; vol. 12; 5; (2015); p. 743 – 749;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, category: Triazoles

General procedure: TBHP (3 eq.) was added to a solution of 3-phenyl-1,2,4-triazole (0.4 mmol) 1a, benzaldehyde 2a (0.6 mmol), followed by TBAI (20 mol%) in DCE(4 mL). The reaction mixture was stirred at 120 oC under nitrogen atmosphere for 5 h. After completion of the reaction confirmed by TLC, the reaction mixture was cooled to room temperature and partitioned between water and ethyl acetate. The organic and aqueous layers were then separated and aqueous layer was extracted with ethyl acetate twice. The combined organic extracts were dried over anhydrous Na2SO4 and concentrated under reduced pressure to afford the crude. The crude was further purified by silica gel chromatography using EtOAc/hexane as eluents to furnish the desired product 3 or 5.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Methyl-1H-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Article; Agisho, Habtamu Abebe; Esatu, Habdolo; Hairat, Suboot; Zaki, Mehvash; Tetrahedron Letters; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-36-8 as follows.

A solution of 2-iodobenzoic acid (3.0 g, 12.09 mmol) in DMF (1.0 mL) was treated with 1,2,3-triazole (1.5 g, 21.7 mmol), copper(I) iodide (0.25 g, 1.2 mmol), Cs2CO3 (7.08 g, 21.7 mmol), and trans-N,N?-dimethylcyclohexane-l ,2-diamine (0.31 g, 2.17 mmol). The mixture was heated at 120 CC for 12h. The reaction was cooled to ii, diluted with EtOAc, and filtered through Celite. The residue was purified by gradient elution on Si02 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the title compound.?HNMR (500 MHz, DMSO-d6) 3 13.05 (br s, 1H), 8.12 (s, 2H), 7.81-7.52 (m, 4H) ppm. LRMS m/z (M+H) 190.2 found, 190.2.

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KIM, Ronald; KUDUK, Scott, D.; LIVERTON, Nigel; ZHUO, Gang; (97 pag.)WO2016/100157; (2016); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In a 10 mL round-bottomed flask, (2S,4R)-4-(2-chloro-4-fluorophenylsulfonyl)-N-(1- cyanocyclopropyl)- 1- (1- (trifluoromethyl)cyclopropanecarbonyl)pyffolidine-2-carboxamide (example 8b)) (400 mg, 788 imol, Eq: 1.00) was combined with DMA (5 mL) to give a colorless solution. 1H-1,2,4-triazole (111 mg, 1.58 mmol, Eq: 2.00) and cesium carbonate (513 mg, 1.58 mmol, Eq: 2.00) were added. The reaction mixture was heated to 80 C and stilTed for 3h. The reaction mixture was poured into water and extracted with EtOAc (2x). The organic layers were combined, washed with saturated aqueous NaHCO3 solution (lx),water (3x) and brine (lx). The organic layers were dried over Na2SO4 and concentrated in vacuo.The crude material was purified twice by flash chromatography (silica gel, 20g, DCM/MeOH 98/2, 19/1) and (silica gel, 20g, Heptan/AcOEt 1/2, 1/3, 1/4) to yield the title compound as a white foam (264 mg; 60%). :_Example 11 was obtained as a byproduct during the synthesis of example 10 as a white solid (34 mg; 7%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HAAP, Wolfgang; KUHN, Bernd; LUEBBERS, Thomas; PETERS, Jens-Uwe; (93 pag.)WO2017/144483; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8, Application In Synthesis of 1H-1,2,3-Triazole

Intermediate 14f (0556) 4,5-Dibromo-lH-triazole (0557) Br2 (930 g, 5.82 mol) was added dropwise to a stirred solution of lH-triazole (300.00 g, 4.34 mol, 252.10 mL) in H20 (2 L) at 40 to 45 C. The resulting solution was stirred for a further 1 hour. The precipitate was filtered off and further Br2 (617.28 g, 3.86 mol) was added to the filtrate, then it was kept at 25 C for 16 hours. A second precipitate was filtered off. The combined filtered off solids were washed with water (1 L x 3), dried under vacuum and re-crystallized from MeOH (-400 mL) to give 4,5-dibromo-lH-triazole (Intermediate 14f; 890 g, 90.39% yield) as an off-white solid, m/z (ES+) [M+H]+ (0558) 226/228/230.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ASTRAZENECA AB; WARD, Richard, Andrew; JONES, Clifford, David; FERON, James, Lyman; (80 pag.)WO2017/80980; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Quality Control of 3-Methyl-1H-1,2,4-triazole

To a mixture of 3-methyl- lH- l,2,4-triazole (330 mg, 3.97 mmol), 5-chloro-2-fluoro- benzaldehyde (425 mg, 2.68 mmol) in DMSO (5.0 mL) is added K2C03 (725 mg, 5.25 mmol). The reaction mixture is stirred at 100 C for 2 hours. The reaction mixture is allowed to cool to room temperature, diluted with CH2C12 (100 mL), and washed with H20 (75 mL x2). The organic layer is dried with Na2S04 and filtered. The filtrate is concentrated under reduced pressure and the residue is purified by silica gel flash column chromatography with 5% MeOH in EtOAc as the eluent to afford an impure mixture of 5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-benzaldehyde plus regiosiomer (270 mg).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; CHEN, Zhidong; HAO, Ming-Hong; LIU, Weimin; LO, Ho-Yin; LOKE, Pui Leng; MAN, Chuk, Chui; MORWICK, Tina, Marie; NEMOTO, Peter, Allen; TAKAHASHI, Hidenori; TYE, Heather; WU, Lifen; WO2011/68821; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics