Tag: M.W=0-100

1455-77-2, name is 3,5-Diamino-1,2,4-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 3,5-Diamino-1,2,4-triazole

Potassium tetranitropropane (200 mg, 0.67 mmol) was added to 20 mL of a mixed solvent of methanol and water (1:1 by volume), then concentrated hydrochloric acid (0.14 mL, 37%, 1.67 mmol) was added dropwise.Then, 3,5-diamino-1,2,4-triazole (293 mg, 1.34 mmol) was added and reacted at room temperature for 2 h. The reaction of the starting material was completely monitored by TLC, and a certain amount of NaHCO3 was added.Then add anhydrous magnesium sulfate to dry, spin dry, and pass the column (PE: EA = 4:1).A yellow solid 168 mg was obtained in 40% yield.

The synthetic route of 1455-77-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Chinese Academy Of Sciences Shanghai Organic Chemistry Institute; Yang Jun; Huang Haifeng; Shi Yameng; (17 pag.)CN110128344; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 49607-51-4, name is 1-Methyl-1H-1,2,4-triazol-3-amine, This compound has unique chemical properties. The synthetic route is as follows., Safety of 1-Methyl-1H-1,2,4-triazol-3-amine

Triphosgene (0.588 g, 1.982 mmol) was added to a stirred solution of (4S)-7-(2- methylpyridin-4-yl)-2,3,4,5-tetrahydro-l,4-methanopyrido[2,3-b][l,4]diazepine (0.5g, 1.982 mmol) in tetrahydrofuran (20 mL) at 0 C and stirred for 30min. Triethylamine (0.829 mL, 5.94 mmol) and 1 -methyl- lH-l,2,4-triazol-3 -amine (0.486 g, 4.95 mmol) was added at 0 C. The reaction mixture was stirred for 48h at 70 C. The reaction mixture was cooled to 28 C, and was partitioned between water (50 mL) and DCM (50 mL). The separated organic layer was washed with water and brine. The organic layer was dried over anhydrous Na2SC”4, filtered and filtrate was evaporated to afford crude yellow solid (TLC eluent: 10% MeOH in EtOAc: Rr0.3; UV active). The crude compound was purified by (100-200 mesh) silica gel and was eluting with 5% MeOH in ethyl acetate to afford (4S)-N-(1 -methyl- H- 1 ,2,4-triazol-3 -yl)-7-(2-methylpyridin-4-yl)-3,4-dihydro- 1 ,4- methanopyrido[2,3-6][l,4]diazepine-5(2H)-car-boxamide (0.215g, 0.563 mmol, 28.4 % yield) as light yellow solid, LCMS (m/z): 377.28 [M+H]+.1H NMR (400 MHz, DMSO-i): delta 13.44 (s, 1H), 8.55 (d, J = 5.2 Hz, 1H), 8.36 (s, 1H), 7.96 (s, 1H), 7.86 – 7.61 (m, 3H), 5.44 (dd, J = 5.8, 3.0 Hz, 1H), 3.83 (s, 3H), 3.27 (d, J = 30.5 Hz, 3H), 2.95 (dd, J= 12.0, 3.2 Hz, 1H), 2.59 (s, 3H), 2.23 (ddt, J= 16.9, 9.7, 4.4 Hz, 1H), 1.91 (dt, J= 14.7, 7.4 Hz, 1H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 49607-51-4.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; ELLIS, James Lamond; EVANS, Karen Anderson; FOX, Ryan Michael; MILLER, William Henry; SEEFELD, Mark Andrew; (766 pag.)WO2016/79709; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, A new synthetic method of this compound is introduced below., category: Triazoles

In a 500 mL round-bottomed flask, lH-l,2,4-triazole-3,5-diamine (1.5 g, 15.1 mmol, Eq: 1.00) and sodium methoxide 1M (33.3 ml, 16.7 mmol, Eq: 1.1) were combined with MeOH (100 ml) to give a colorless turbid solution. The reaction mixture was stirred for 4 hr and stripped to a gray solid. Suspended in 30 ml DMF and l-(chloromethyl)-4-methoxybenzene (2.42 g, 2.1 ml, 15.4 mmol, Eq: 1.02) was added. The dark brown suspension was stirred at 25C for 60 hrs under argon. The reaction was diluted with water (35 ml) and extracted with EtOAc (3 x 50 ml). The organic layers were combined, washed with H20 (1 x 25 mL), sat NaCl (1 x 50 ml), dried over Na2S04 and concentrated in vacuo to a white pasty solid. Dried under vacuum while gently heating to remove residual DMF and PMB-C1. The crude material was purified by flash chromatography (silica gel, 80g, 0percent to 10percent MeOH in DCM) to give 457 mg of desired product as a yellow solid (14percent). MS (m+1) = 220.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Zhi; CHIN, Elbert; ERICKSON, Shawn David; GABRIEL, Stephen Deems; MERTZ, Eric; WEIKERT, Robert James; WO2014/135483; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-65-5, These common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of n-BuLi (2.5 M in hexanes, 1.25 mL, 3.12 mmol) was added dropwise by syringe to a solution of 1-methyl-1H-1,2,3-triazole (268 mg, 3.22 mmol) in dry THF (32 mL) in a dry ice-methanol bath. The suspension was stirred for 30 minutes, slowly allowing the reaction mixture to warm to -10 C. (4-Chloro-2-methoxy-3-((6-(trifluoromethyl)pyridin-3-yl)methyl)quinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (0.500 g, 1.05 mmol, Intermediate 45: step f) in dry THF (5 mL) was added to the mixture via syringe and the resulting mixture was allowed to warm to ambient temperature overnight. The reaction was quenched with water. Brine was added and the aqueous mixture was extracted with ethyl acetate. The combined organic layers were dried (Na2SO4), filtered, and concentrated. The crude product was purified by flash column chromatography (silica gel, 0-8% MeOH-DCM) to provide the title compound. 1H NMR (500 MHz, CDCl3) delta 8.69 (d, J=1.7 Hz, 1H), 8.24 (d, J=1.9 Hz, 1H), 8.22 (s, 1H), 7.79-7.76 (m, 1H), 7.75 (d, J=8.7 Hz, 1H), 7.57 (d, J=8.1 Hz, 1H), 7.42 (dd, J=8.7, 2.0 Hz, 1H), 6.97 (s, 1H), 5.95 (s, 1H), 4.30 (s, 2H), 4.08 (s, 3H), 3.88 (s, 3H), 3.33 (s, 3H), 2.12 (s, 3H); MS m/e 557.8 [M+H]+.

Statistics shows that 1-Methyl-1H-1,2,3-triazole is playing an increasingly important role. we look forward to future research findings about 16681-65-5.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; Jones, William Moore; Goldberg, Steven; US2015/105366; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 1455-77-2,Some common heterocyclic compound, 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, molecular formula is C2H5N5, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 10 mmol of 1,2,4-triazole-3,5-diamine, pyridine-2,6-diamine, or 4-hydroxypyrimidine-2,6-diamine in 50 mL of glacial acetic acid was slowly added to a solution of 20 mmol of phthalic anhydride or tetrachlorophthalic anhydride in 100 mL of glacial acetic acid. The colored solution was refluxed with constant stirring for 8 h at 100 ¡ãC (TLC monitoring; MeOH?CH2Cl2, 1 : 4) and poured into cold water. The colored precipitate was filtered off, dried in a vacuum desiccator over fused CaCl2, and recrystallized from DMSO. 2,2?-(1H-1,2,4-Triazole-3,5-diyl)bis[1H-isoindole-1,3(2H)-dione] (1). Yield 66percent, white solid, mp >300¡ãC. IR spectrum, nu, cm?1: 1793, 1743 (C=O), 3298 (N?H),691 [delta(C?Carom)]. 1H NMR spectrum, delta, ppm: 7.60 d (4H, Harom), 7.69 d (4H, Harom), 11.13 s (1H, NH). Mass spectrum: m/z 360.01 [M + 1]+. Found, percent: C60.12; H 2.47; N 19.54. C18H9N5O4. Calculated, percent: C60.17; H 2.52; N 19.49.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3,5-Diamino-1,2,4-triazole, its application will become more common.

Reference:
Article; Arif; Nayab, P. Sirajuddin; Rahisuddin; Russian Journal of General Chemistry; vol. 86; 6; (2016); p. 1374 – 1380; Zh. Obshch. Khim.; vol. 86; 6; (2016); p. 1374 – 1380,7;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 61-82-5, name is 1H-1,2,4-Triazol-5-amine, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 61-82-5, Safety of 1H-1,2,4-Triazol-5-amine

General procedure: A mixture of aromaticaldehyde (1.0 mmol) and dimedone(1.0 mmol) with 2-aminobenzimidazole or 3-amino-1,2,4-triazole (1.0 mmol) was stirred in acetic acid (5 mL) at 60 Cfor the appropriate time (Tables 3, 4). The progress of thereaction was monitored by TLC. After completion of thereaction, a thick precipitate was obtained. The solid productwas filtered off and washed with acetic acid (3 ¡Á 2 mL) togive the pure products 4 and 6, and subsequently dried in air.The pure products were characterized by conventional spectroscopicmethods. Physical and spectral data for the compounds,4b, 4c, 4h, 4j, 6a, 6c, and 6h are represented below:

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Mousavi, Mir Rasul; Maghsoodlou, Malek Taher; Hazeri, Nourallah; Habibi-Khorassani, Sayyed Mostafa; Journal of the Iranian Chemical Society; vol. 12; 8; (2015); p. 1419 – 1424;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 61-82-5, These common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of 3-amino-1,2,4-triazole or benzimidazole (1.0 mmol), benzaldehyde (1.0 mmol), dimedone (1.0 mmol), and acetonitrile (5 mL) was taken in a round bottom flask and added iodine (10 mol %) and stirred at 80 C for 10 min. After completion of the reaction, as monitored by TLC, the reaction mass was cooled to room temperature and the solid separated was filtered and washed with water and dried at reduced pressure.Data of representative examples

The synthetic route of 61-82-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Puligoundla, Ravinder Goud; Karnakanti, Shuklachary; Bantu, Rajashaker; Nagaiah, Kommu; Kondra, Sudhakar Babu; Nagarapu, Lingaiah; Tetrahedron Letters; vol. 54; 20; (2013); p. 2480 – 2483;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 61-82-5

General procedure: A mixture of aldehyde (1.0 mmol), dimedone (1.0 mmol),1H-1,2,4-triazol-3-amine (1.0 mmol) and nano-AlPO4(SO3H) (0.1 g) was stirred in the acetonitrile (4.0 mL)at 50 C for an appropriate time. After the completion of thereaction as indicated by TLC, dichloromethane was addedto the solidified mixture and the insoluble catalyst was separatedby centrifugation. Evaporation of the solvent from thefiltrate and recrystallization of the solid residue from hot ethanolafforded the pure products in good to excellent yields

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 61-82-5, its application will become more common.

Reference:
Article; Sharghi, Hashem; Aboonajmi, Jasem; Aberi, Mahdi; Shiri, Pezhman; Journal of the Iranian Chemical Society; vol. 15; 5; (2018); p. 1107 – 1118;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), Cs2CO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-5, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. Data for A-5: 1HNMR (500 MHz, DMSO-d6) d 12.98 (br s , IH), 8.04 (s, 2H), 7.72-7.45 (m, 3H), 2.41 (s, 3H) ppm.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-1,2,3-Triazole, its application will become more common.

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; COLEMAN, Paul, J.; SCHREIER, John, D.; WO2010/48014; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 41253-21-8,Some common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2,4-difluorobenzonitrile (10 g, 72 mmol) dissolved in tetrahydrofuran (20 mL), and dimethylformamide (40 mL) was added 1,2,4-triazole sodium salt (6.3 g, 70 mmol) and the mixture stirred at 90 0C for 3 h after which the mixture was filtered and the solvent removed. The resulting residue was adsorbed onto silica gel and intermediates 67 and 68 separated by flash chromatography, eluting with 0% to 30% ethyl acetate/hexanes.Intermediate 674-Fluoro-2-(lH-l,2,4-triazol-l-yl)benzonitrile. Colorless needles (2.46 g,18% yield) 1H NMR (500 MHz, CDCl3) delta: 8.89 (IH, s), 8.19 (IH, s), 7.85 (IH, dd, J = 8.7, 5.6 Hz), 7.60 (IH, dd, J= 8.8, 2.4 Hz), 7.28-7.24 (IH, m). LCMS (M+H) calcd for C9H6N4F: 189.05; found: 189.13. Intermediate e 684-(lH-l,2,4-Triazol-l-yl)-2-fluorobenzonitrile. White solid (0.746 g, 6% yield) 1H NMR (500 MHz, CDCl3) delta: 8.66 (IH, s), 8.15 (IH, s), 7.79 (IH, dd, J= 8.5, 6.7 Hz), 7.69 (IH, dd, J= 9.5, 1.8 Hz), 7.65-7.63 (IH, m). LCMS (M+H) calcd for C9H6N4F: 189.05; found: 189.13.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Sodium 1,2,4-triazol-1-ide, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2007/64316; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics