Tag: M.W=0-100

Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 1H-1,2,3-Triazole

in a polar solvent,DMF, 9,10-dibromoanthracene, triazole, potassium carbonate and copper oxide inthe preparation of the organic compound under heating; 9,10-dibromoanthracenewherein: three azole: potassium carbonate: copper oxide molar ratio of 2: 10:30: 1; The reaction temperature is1500 C, the reaction time of 18 hours

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Reference:
Patent; Tianjin Normal University; WANG, YING; (12 pag.)CN104497023; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1455-77-2, COA of Formula: C2H5N5

A mixture of Hdatrz (19.8mg, 0.2mmol), CH3-H2ip (36.0mg, 0.2mmol) and Co(OAc)2¡¤4H2O (24.9mg, 0.1mmol) was dissolved in mixed H2O?CH3OH (v:v=1:1, 10.0mL) solution, and the initial pH value of the reactant mixture was adjusted to ca. 6 by slow addition of triethylamine with constant stirring. The resulting mixture was then transferred into a Teflon-lined stainless steel vessel (23.0mL) and heated at 160¡ãC for 96h under autogenous pressure. After the mixture was cooled to room temperature at a rate of 1.4¡ãCh?1, red block-shaped crystals suitable for X-ray analysis were obtained directly, washed with water and dried in air (Yield: 50percent, based on CoII salt). Anal. Calc. for C12H15CoN5O5: C, 39.14; H, 4.11; N, 19.02. Found: C, 39.14; H, 4.12; N, 19.05percent. IR (KBr pellet, cm?1): 3445 (s), 3333 (w), 3070 (w), 1670 (s), 1633 (s), 1546 (s), 1439 (s), 1370 (s), 1246 (w), 1083 (m), 1032 (m), 817 (w), 783 (m), 751 (w), 723 (m).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3,5-Diamino-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Zhao, Hong; Li, Hong-Xue; Liu, Zhong-Yi; Yang, En-Cui; Zhao, Xiao-Jun; Polyhedron; vol. 101; (2015); p. 29 – 36;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

60166-43-0, name is 1,4-Dimethyl-1H-1,2,3-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: Triazoles

A solution of 1,4-dimethyltriazole (14.1, 500 mg, 5.15 mmol, 1 equivalent) in THF (2 mL) was added dropwise to a solution of n-BuLi (2.5 M, 2.47 mL, 1.2 equivalent) in THF (15 mL) at -78 C. under nitrogen atmosphere. The resulting cloudy mixture was stirred at -70 C. for 1 h. After this time, tributyl tinchloride (1.84 g, 5.66 mmol, 1.52 mL, 1.1 equivalent) was added; the reaction mixture became clear and was stirred at -70 C. for 30 min, then it was allowed to warm to 20 C. The reaction mixture was poured into saturated NH4Cl solution (10 mL) and extracted with EtOAc (50 mL*3). The combined organic layers were washed with brine (50 mL*2), were dried over sodium sulfate then filtered. The solvent was concentrated under reduced pressure to give tributyl-(3,5-dimethyltriazol-4-yl)stannane (14.2, 2.2 g) as a yellow oil; LCMS [M+1]: 388.2.

The synthetic route of 60166-43-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Mirati Therapeutics, Inc.; Marx, Matthew Arnold; Lee, Matthew Randolph; Galemmo, Robert Anthony; Bobinski, Thomas P.; US2018/265517; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 584-13-4, name is 4H-1,2,4-Triazol-4-amine belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 4H-1,2,4-Triazol-4-amine

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

The synthetic route of 584-13-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 584-13-4, name is 4H-1,2,4-Triazol-4-amine belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 4H-1,2,4-Triazol-4-amine

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

The synthetic route of 584-13-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 49607-51-4, name is 1-Methyl-1H-1,2,4-triazol-3-amine belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1-Methyl-1H-1,2,4-triazol-3-amine

(2S,3S)-2-(Fluoromethyl)-7-(methylcarbamoyl)-3-phenyl-2,3-d ihyd robenzofuran-5-carboxylic acid (80 mg, 0.24 minol) and HATU (111 mg, 0.292 minol) were dissolved in DMSO (0.85 mL), andthe resulting solution was treated with DIPEA (0.127 mL, 0.729 minol) and the reaction minxture wasleft to stir at rt for 5 min 1-Methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) was added andthe reaction was left to stir for 1 h at rt. Further HATU (111 mg, 0.292 minol) and DIPEA (0.127 mL,0.729 minol) were added and the reaction minxture was left to stir for 5 min then 1-methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) was added and reaction minxture stirred for 2 h at rt. FurtherHATU (111 mg, 0.292 minol) and DIPEA (0.127 mL, 0.729 minol) were added and the reaction minxturewas left to stir for 5 min then 1-methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) was addedand reaction minxture stirred for 2 h at rt and was then left to stand overnight. HATU (111 mg, 0.292minol) and DIPEA (0.127 mL, 0.729 minol) were again added and the reaction minxture was left to stirfor 5 min then 1-methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) was added and reaction minxture stirred for 3 h then left to stand over the weekend. The reaction minxture had separated and become solid and not all of the reactants seemed to have gone into solution therefore further DMSO (1 mL) was added to the reaction minxture and it was left to stir at rt for 3 h. 1-Methyl-1H-1,2,4-triazol- 3-amine (23.8 mg, 0.243 minol) was added and the reaction minxture was left to stir at rt for 1 h thenleft to stand overnight. Further HATU (iii mg, 0.292 minol), DIPEA (0.127 mL, 0.729 minol) and 1- methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) were added and the reaction left to stir at rt for 1 h. Further HATU (iii mg, 0.292 minol), DIPEA (0.127 mL, 0.729 minol) and 1-methyl-1H-1,2,4- triazol-3-amine (23.8 mg, 0.243 minol) were added and the reaction left to stir at rt for 1 h. The reaction minxture was then purified by MDAP (method high pH) to give (2S,3S)-2-(fluoromethyl)-N7-methyl-N5-( 1-methyl-i H-1,2,4-triazol-3-yl)-3-phenyl-2,3-d ihydrobenzofuran-5,7-dicarboxaminde (24.8 mg 25percent) as a white solid.LCMS (method forminc): Retention time 0.79 min [M+H] = 410

The synthetic route of 49607-51-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; ATKINSON, Stephen, John; DEMONT, Emmanuel, Hubert; HARRISON, Lee, Andrew; PRESTON, Alexander, G.; SEAL, Jonathan, Thomas; WALL, Ian, David; WATSON, Robert, J.; WOOLVEN, James, Michael; (214 pag.)WO2017/174620; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 930-33-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 930-33-6, name is 1H-1,2,4-Triazol-3(2H)-one belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

5-[5-Amino-4-(3-chloro-5-trifluoromethylphenyl)-3-trifluoromethylpyrazol-1-yl]-2-(5-oxo-4,5-dihydro[1,2,4]triazol-1-yl)benzonitrile (I-A-Q1-002) 2,4-Dihydro[1,2,4]triazol-3-one (11 mg, 0.13 mmol) and potassium carbonate (18 mg, 0.13 mmol) are added to a solution of 5-[5-amino-4-(3-chloro-5-trifluoromethylphenyl)-3-trifluoromethylpyrazol-1-yl]-2-fluorobenzonitrile (50 mg, 0.11 mmol) in DMF (2 ml). The reaction mixture is stirred at 80 C. for 15 min, cooled to room temperature, poured into water (5 ml) and extracted with ethyl acetate (5 ml). The organic phase is washed with water (5 ml), dried over sodium sulphate and concentrated using a rotary evaporator. Purification by chromatography on silica gel using cyclohexane/ethyl acetate 2/1 to 1/3 gives 5-[5-amino-4-(3-chloro-5-trifluoromethylphenyl)-3-trifluoromethylpyrazol-1-yl]-2-(5-oxo-4,5-dihydro[1,2,4]triazol-1-yl)benzonitrile (8 mg, 0.016 mmol, 12%).log P(HCOOH): 3.451H NMR (DMSO-d6): 8.28 (d, 1H, J=2.3 Hz), 8.24 (d, 1H, J=1.2 Hz), 8.12 (dd, 1H, J=8.8 and 2.4 Hz), 7.87 (d, 1H, J=8.8 Hz), 7.79 (s, 1H), 7.69 (s, 1H), 7.60 (s, 1H), 5.96 (s, 2H)

The synthetic route of 1H-1,2,4-Triazol-3(2H)-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bayer Crop Science AG; US2011/190365; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 61-82-5,Some common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-1,2,4-Triazol-5-amine, its application will become more common.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 4-Methyl-1H-1,2,3-triazole

To a solution of E15 (150 mg, 0.35 mmol) in DMF (6 mL) was added Cs2C03 (343 mg, 1.05 mmol) and 4-methyl-l, 2, 3-triazole (145 mg, 1.75 mmol) at 28 C. The reaction mixture was stirred at the same temperature for 6 h. TLC showed that the starting material was consumed completely. The mixture was poured into water (20 mL), and extracted with EtOAc (10 mL *2). The combined organic layers were dried over Na2SC>4 and concentrated to give crude product. The crude product was purified by pre-HPLC to give pure 94 (35.8 mg) and a mixture of 95 and 96 (20 mg). Then the mixtue was purified by SFC to give 95 (3.9 mg) and 96 (5.6 mg). Total yield: 23.7%. The structure of the three targets was confirmed by NOE. 1H NMR (94): (400 MHz, CDC13) delta 7.42 (s, 1H), 5.19-5.08 (m, 2H), 4.13-4.09 (m, 1H), 3.53- 3.38 (m, 2H), 3.29 (s, 3H), 2.61-2.54 (m, 1H), 2.33 (s, 3H), 2.26-2.15 (m, 1H), 2.11-1.95 (m, 2H), 1.78-1.61 (m, 9H), 1.52-1.06 (m, 9H) , 1.04-0.81 (m, 2H) , 0.72 (s, 3H) . 1H NMR (95): (400 MHz, CDC13) delta 7.50 (s, 1H), 5.23-5.05 (m, 2H), 4.15-4.06 (m, 1H), 3.58- 3.42 (m, 2H), 3.31 (s, 3H), 2.71-2.61 (m, 1H), 2.33-2.14 (m, 6H), 2.12-1.96 (m, 4H), 1.34-1.18 (m, 10H), 1.06-0.83 (m, 6H), 0.70 (s, 3H) . 1H NMR (96): (400 MHz, CDC13) delta 7.35 (s, 1H), 5.22-5.02 (m, 2H), 4.15-4.10 (m, 1H), 3.56- 3.39 (m, 2H), 3.31 (s, 3H), 2.67-2.61 (m, 1H), 2.39 (s, 3H), 2.29-1.88 (m, 10H), 1.33-1.22 (m, 10H), 1.02-0.97 (m, 1H), 0.92-0.84 (m, 2H) , 0.70 (s, 3H).

According to the analysis of related databases, 27808-16-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SAGE THERAPEUTICS, INC.; MARTINEZ BOTELLA, Gabriel; HARRISON, Boyd, L.; ROBICHAUD, Albert, Jean; SALITURO, Francesco, Gerald; HERR, Robert, Jason; KARGBO, Robert, Borbo; WO2015/27227; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, A new synthetic method of this compound is introduced below., name: 5-Methyl-4H-1,2,4-triazol-3-amine

Example 20A (rac)-Ethyl 7-(4-cyanophenyl)-2,5-dimethyl-4,7-dihydro[1,2,4]triazolo[1,5-a]pyrimidine-6-carboxylate Under an atmosphere of argon, ethyl 2-(4-cyanobenzylidene)-3-oxobutanoate (381 mg, 1.6 mmol) and 5-methyl-4H-1,2,4-triazole-3-amine (200 mg, 2.0 mmol, 1.3 eq.) were dissolved in DMF (4 ml), and solid sodium bicarbonate (659 mg, 7.8 mmol, 5 eq.) was added. The mixture was stirred at 65 C. for 12 h. The mixture was then filtered, and the DMF from the filtrate was distilled off under reduced pressure. The residue was purified by preparative HPLC (Gromsil C18 column, 30*250 mm; mobile phase: acetonitrile-water-0.1% TFA). After lyophilization, the product was obtained as a solid (300 mg, 46% of theory). LC-MS (Method 2): Rt=1.92 min; MS (ESIpos): m/z (%)=324.1 (100) [M+H]+; MS (ESIneg): m/z (%)=322.1 (100) [M-H]-. 1H-NMR (400 MHz, DMSO-d6): delta=1.0 (t, 3H), 2.1 (t, 3H), 2.4 (s, 3H), 3.4 (m, 2H), 6.25 (s, 1H), 7.4 (m, 2H), 7.8 (m, 2H), 10.75 (s, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BAYER SCHERING PHARMA AKTIENGESELLSCHAFT; US2012/4203; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics