Tag: M.W=0-100

Synthetic Route of 6086-21-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6086-21-1, name is 1-Methyl-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

a) To a solution of 1-methyl-1,2,4-triazole (3.0 g, 36.1 mmol) in tetrahydrofurane (60 ml) was added n-buthyllithium (43.3 mmol, 1.2 eq) at -78¡ã C. under nitrogen. The mixture was stirred for 1 hour, then diethyl 3-oxo-butylphosphonate (8.3 g, 39.7 mmol, 1.1 eq) was added. The mixture was stirred for 2 hours and quenched with aq. NH4 Cl (ca. 15 ml). The mixture was warmed to room temperature and extracted with CH2 Cl2 (5*100 ml). The extract was dried over MgSO4, concentrated in vacuo, and purified by a silica gel column chromatography (200 g, AcOEt-EtOH) to give (2.99 g, 28percent yield) of diethyl 3-hydroxy-3-methyl-3-(1-methyl-1,2,4-triazol-5-yl)propyl-phosphonate. 1 H NMR (90 MHz, CDCl3) delta 7.75 (s, 1H), 4.13 (s, 3H), 4.29-3.90 (m, 4H), 2.80-1.80 (m, 5H), 1.63 (s, 3H), 1.37 (t, 3H, J=7.0 Hz), 1.33 (t, 3H, J=7.0 Hz).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methyl-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Japat Ltd.; US5248655; (1993); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of Sodium 1,2,4-triazol-1-ide

First, 3.8 g of 1,2,4-triazole were dissolved in 8 ml of NMP at 2O0C. Then,2.2 g of NaOH and 22 ml of NMP were added in portions over 1 hour, maintaining the temperature at less than 350C. The solution was stirred for 2 hours at 20C, and 7.8 g of Na2SO4 were then added. After filtration of the solid, the resulting solution was transferred to a dropping funnel, and added over 75 minutes to a solution of 14 g of crude l,3-benzenediacetonitrile-5-(bromomethyl)-alpha,alpha,alpha’,alpha’ tetramethyl (having a purity of 81.8%, containing: 3,5-bis(2-cyanoisopropyl)toluene 4.0%, l,l-dibromo-3,5-bis(2- cyanoisopropyl)toluene 10.7%, and other impurities 3.5% ) in 20 ml of NMP, cooled to -3O0C. At the end of the addition, the suspension was stirred at -300C for 18 hours, and monitored via HPLC. When the concentration of starting material is less than 0.5 percent, an amount of acetic acid sufficient to give a pH of about 6.5 to about 7.0 is added (an HPLC analysis of the crude reaction mixture showed: residual starting material 0.4%, Anastrozole 68.9%, Isoanastrozole 5.5%, 3,5-bis (2-cyanoisopropyl)toluene 7.5%, 1,1-dibromomethyl- 3,5-bis(2-cyanoisopropyl)benzene, and 15.4%, and other impurities 2.3%.). The mixture is then allowed to warm slowly to 200C, filtered, and 37 ml of toluene, 75 ml of heptane, and 37 ml of water are added. The biphasic system is stirred vigorously for 30 minutes, and the organic layer is then separated. Water, toluene, and heptane in amounts of 25 ml, 25 ml, and 50 ml, respectively, are added to the aqueous phase, and the system is stirred for 30 minutes before the organic phase is separated. Then, 10 ml of toluene and 20 ml of heptane are added to the aqueous phase, and the system is stirred for 30 minutes before the organic phase is separated. Toluene and water, 99 ml and 400 ml, respectively, are added to the aqueous phase, and the resulting biphasic system is stirred for 1 hour. The organic layer is separated and washed 3 times with a mixture of MeOH and water (3 ml and 21 ml, respectively). The final organic phase is concentrated to 45 ml under reduced pressure at 400C, and 45 ml of heptane are added dropwise over 1 hour. The resulting suspension is cooled to 00C, stirred for 1 hour, and filtered. The crude solid is dissolved in toluene (40 ml) at 4O0C, and heptane (40 ml) is slowly added under stirring. The suspension is cooled to 00C, stirred for 1 hour, EPO and filtered. The solid is driejd at 55C under reduced pressure until constant weight is achieved, yielding 5.8 g of product with a purity as follows: Anastrozole 98.45%, Isoanastrozole 0.09%, 3,5-bis (2-cyanoisopropyl)toluene 0.06%, l-bromo-3,5-bis (2- cyanoisopropyl)toluene 0.11%, l,l-dibromo-3,5-bis(2-cyanoisopropyl)toluene 0.07%, other impurities 1.22% are by HPLC.

The synthetic route of 41253-21-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SICOR, INC.; WO2006/108155; (2006); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 16778-70-4, name is 1-Ethyl-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C4H7N3

Intermediate 72; l-(2-Ethyl-2H-ri.2.41triazol-3-yl)-ethanone; n-Butyl lithium (424 ml, 1.6M solution in THF, 0.679 moles) was added dropwise to a solution of l-ethyl-lH-l,2,4-triazole (55 g, 0.566 moles) in THF (400 ml) at 0 C. After stirring for 1 hr at 0 C, N,N-dimethylacetamide (63 ml, 0.679 moles) was added to the reaction mixture and the stirring was continued for 1 hr. The progress of the reaction was monitored by TLC. The reaction mixture was quenched with sat. ammonium chloride solution and extracted with DCM. The combined organic layers were dried over sodium sulfate and concentrated. The crude material was purified by column chromatography (100% hexane followed by gradient elution to 10% ethyl acetate in hexane). Product (70 g) was obtained as light yellowish liquid. (Note : Since the product is volatile, it has to be distilled at less than 400 C) NMR (400 MHz, CDC13, delta): 1.42 (t, 3H), 2.69 (s, 3H), 4.58 (q, 4H), 7.90 (s, IH). MS (ES) (M+H)+: 140 for C6H9N3O.

The synthetic route of 1-Ethyl-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; PEER MOHAMED, Shahul, Hameed; WATERSON, David; WO2010/67125; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below., Quality Control of 1H-1,2,3-Triazole

To a stirred solution of 1,2, 3-triazole (2.0 g, 28.9 mmol) in THF (10 mL) was added NaH (l.065g, 43.1 mmol) portion wise at 0 C under inert atmosphere. After being stirred for 45 min at 0C, 2-(trimethylsilyl)ethoxymethyl-Cl (SEM-C1; 7.6 mL, 43.1 mmol) was added to the reaction mixture. After completion of addition the reaction mixture was allowed to warm to RT and stirred for 12 h. The reaction mixture was quenched with water and extracted with ethyl acetate (2 x 100 mL). The combined organic extracts were washed with brine, dried over anhydrous Na2S04 and concentrated under reduced pressure to give crude compound. The crude material was purified by column chromatography eluting with 10% EtO Ac/hexane to afford N-2-(trimethylsilyl)ethoxymethyl- 1,2, 3-triazole (3.5 g, 17.5 mmol, 61%) as a liquid. Mass: m/z 200 [M++l].

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; INNOCRIN PHARMACEUTICALS, INC.; THE REGENTS OF THE UNIVERSITY OF MICHIGAN; EISNER, Joel; WAHL, Daniel; SPEERS, Corey; (111 pag.)WO2020/77197; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 61-82-5, name is 1H-1,2,4-Triazol-5-amine, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 61-82-5, Safety of 1H-1,2,4-Triazol-5-amine

General procedure: A mixture of aldehyde (1.0 mmol), dimedone (1.0 mmol),1H-1,2,4-triazol-3-amine (1.0 mmol) and nano-AlPO4(SO3H) (0.1 g) was stirred in the acetonitrile (4.0 mL)at 50 C for an appropriate time. After the completion of thereaction as indicated by TLC, dichloromethane was addedto the solidified mixture and the insoluble catalyst was separatedby centrifugation. Evaporation of the solvent from thefiltrate and recrystallization of the solid residue from hot ethanolafforded the pure products in good to excellent yields

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Sharghi, Hashem; Aboonajmi, Jasem; Aberi, Mahdi; Shiri, Pezhman; Journal of the Iranian Chemical Society; vol. 15; 5; (2018); p. 1107 – 1118;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C3H5N3

Step 212.1: To a solution of 3-methyl-1H-1,2,4-triazole (1 g) in MeCN (40 mL) was added Cs2CO3 (3.72 g) followed by benzyl bromoacetate (1.89 mL). The reaction mixture was stirred at RT for 1 h and evaporated to dryness. The residue was taken up in EA and washed with water, sat. NH4Cl and brine. The aq. layers were extracted with EA, the combined org. layers were dried (MgSO4), filtered off and evaporated in vacuo. The residue was purified by CC (Biotage, SNAP 100 g cartridge, solvent A: DCM; solvent B: DCM/MeOH 8/2; gradient in % B: 15 for 12CV, 15 to 25 over 2CV, 25 for 3CV) to afford 2.23 g of oil. The oil was purified by preparative chiral HPLC (II) to afford the two regioisomers, both as mixture of benzyl and ethyl ester that formed during the evaporation of the fractions after HPLC purification. The second eluting compound also contains the methyl ester analog due to the addition of MeOH to the fractions before evaporation. [0921] First eluting compound: (5-Methyl-[1,2,4]triazol-1-yl)-acetic acid benzyl ester (1.07 g, brown oil, contains 16% of the ethyl ester analog). LC-MS (B): tR=0.68 min; [M+H]+: 232.16. 1H-NMR (CDCl3): 7.83 (s, 1H); 7.40-7.33 (m, 5H); 5.23 (s, 2H); 4.93 (s, 2H); 2.43 (s, 3H). Roesy signal seen between CH2 at 4.93 ppm and CH3 at 2.43 ppm. [0922] Second eluting compound: (3-Methyl-[1,2,4]triazol-1-yl)-acetic acid benzyl ester (1.15 g, yellow oil, contains 30% of the ethyl ester and 20% of the methyl ester analogs). LC-MS (B): tR=0.67 min; [M+H]+: 232.16. 1H-NMR (CDCl3): 8.05 (s, 1H); 7.40-7.30 (m, 5H); 5.23 (s, 0.95H, CH2 of benzyl ester); 4.93-4.88 (3s, 2H); 4.27 (q, 0.58H, CH2 of ethyl ester); 3.81 (s, 0.65H, CH3 of methyl ester); 2.42 (s, 3H). Roesy signal seen between CH at 8.05 ppm and CH2 at 4.93-4.88 ppm.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 7170-01-6, its application will become more common.

Reference:
Patent; Caroff, Eva; Keller, Marcel; Kimmerlin, Thierry; Meyer, Emmanuel; US2014/371204; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 61-82-5 as follows. name: 1H-1,2,4-Triazol-5-amine

General procedure: A mixture of aldehyde (1.0 mmol), dimedone (1.0 mmol),1H-1,2,4-triazol-3-amine (1.0 mmol) and nano-AlPO4(SO3H) (0.1 g) was stirred in the acetonitrile (4.0 mL)at 50 C for an appropriate time. After the completion of thereaction as indicated by TLC, dichloromethane was addedto the solidified mixture and the insoluble catalyst was separatedby centrifugation. Evaporation of the solvent from thefiltrate and recrystallization of the solid residue from hot ethanolafforded the pure products in good to excellent yields

According to the analysis of related databases, 61-82-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Sharghi, Hashem; Aboonajmi, Jasem; Aberi, Mahdi; Shiri, Pezhman; Journal of the Iranian Chemical Society; vol. 15; 5; (2018); p. 1107 – 1118;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-88-0, name is 1H-1,2,4-Triazole, A new synthetic method of this compound is introduced below., Product Details of 288-88-0

First, 3.8 g of 1,2,4-triazole were dissolved in 8 ml of NMP at 2O0C. Then,2.2 g of NaOH and 22 ml of NMP were added in portions over 1 hour, maintaining the temperature at less than 350C. The solution was stirred for 2 hours at 20C, and 7.8 g of Na2SO4 were then added. After filtration of the solid, the resulting solution was transferred to a dropping funnel, and added over 75 minutes to a solution of 14 g of crude l,3-benzenediacetonitrile-5-(bromomethyl)-alpha,alpha,alpha’,alpha’ tetramethyl (having a purity of 81.8%, containing: 3,5-bis(2-cyanoisopropyl)toluene 4.0%, l,l-dibromo-3,5-bis(2- cyanoisopropyl)toluene 10.7%, and other impurities 3.5% ) in 20 ml of NMP, cooled to -3O0C. At the end of the addition, the suspension was stirred at -300C for 18 hours, and monitored via HPLC. When the concentration of starting material is less than 0.5 percent, an amount of acetic acid sufficient to give a pH of about 6.5 to about 7.0 is added (an HPLC analysis of the crude reaction mixture showed: residual starting material 0.4%, Anastrozole 68.9%, Isoanastrozole 5.5%, 3,5-bis (2-cyanoisopropyl)toluene 7.5%, 1,1-dibromomethyl- 3,5-bis(2-cyanoisopropyl)benzene, and 15.4%, and other impurities 2.3%.). The mixture is then allowed to warm slowly to 200C, filtered, and 37 ml of toluene, 75 ml of heptane, and 37 ml of water are added. The biphasic system is stirred vigorously for 30 minutes, and the organic layer is then separated. Water, toluene, and heptane in amounts of 25 ml, 25 ml, and 50 ml, respectively, are added to the aqueous phase, and the system is stirred for 30 minutes before the organic phase is separated. Then, 10 ml of toluene and 20 ml of heptane are added to the aqueous phase, and the system is stirred for 30 minutes before the organic phase is separated. Toluene and water, 99 ml and 400 ml, respectively, are added to the aqueous phase, and the resulting biphasic system is stirred for 1 hour. The organic layer is separated and washed 3 times with a mixture of MeOH and water (3 ml and 21 ml, respectively). The final organic phase is concentrated to 45 ml under reduced pressure at 400C, and 45 ml of heptane are added dropwise over 1 hour. The resulting suspension is cooled to 00C, stirred for 1 hour, and filtered. The crude solid is dissolved in toluene (40 ml) at 4O0C, and heptane (40 ml) is slowly added under stirring. The suspension is cooled to 00C, stirred for 1 hour, EPO and filtered. The solid is driejd at 55C under reduced pressure until constant weight is achieved, yielding 5.8 g of product with a purity as follows: Anastrozole 98.45%, Isoanastrozole 0.09%, 3,5-bis (2-cyanoisopropyl)toluene 0.06%, l-bromo-3,5-bis (2- cyanoisopropyl)toluene 0.11%, l,l-dibromo-3,5-bis(2-cyanoisopropyl)toluene 0.07%, other impurities 1.22% are by HPLC.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SICOR, INC.; WO2006/108155; (2006); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 41253-21-8, The chemical industry reduces the impact on the environment during synthesis 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, I believe this compound will play a more active role in future production and life.

in a 2000 L finished synthesis kettle, 138 kg of sodium triazole sodium salt was dissolved in 15 kg of formamide. Adding N,N-dimethylformamide mother liquor, slowly raising the temperature to 80 C at a rate of 55 C / h, and reacting at 80 C for 8 hours, Then, N,N-dimethylformamide was recovered under a vacuum of -0.085 MPa for 2.7 hours. After the completion of the collection, the mixture is transferred to a high-vacuum distillation still for fractional distillation, and the mixture is fractionated under a vacuum of 1.33 kPa and a temperature of 227 C for 8 hours, and cooled to room temperature to obtain a fluorosilazole; wherein, the formula of the specific alkylation reaction is as follows: Formula (3).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Sodium 1,2,4-triazol-1-ide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Shanxi Hengrun Chemical Co., Ltd.; Fan Ming; Li Cangzhen; Chen Dunguo; Chao Liumin; Wang Jianqiao; Yin Weixin; (7 pag.)CN108864165; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Quality Control of 3-Methyl-1H-1,2,4-triazole

E) tert-butyl 6-methyl-5-(3-methyl-1H-1,2,4-triazol-1-yl)pyrazolo[1,5-a]pyrimidine-3-carboxylate To a solution of tert-butyl 5-chloro-6-methylpyrazolo[1,5-a]pyrimidine-3-carboxylate (1.08 g) in N,N-dimethylformamide (20.2 mL) were added 3-methyl-1H-1,2,4-triazole (469 mg) and potassium carbonate (781 mg) at room temperature. The reaction mixture was stirred at room temperature under an atmosphere dried with calcium chloride, and stirred overnight and then at 60 C. for 2 hr. The reaction mixture was cooled to room temperature, and water was added. The resulting solid was collected by filtration, washed with water, and dried under reduced pressure to give the title compound (870 mg) containing a regioisomer. MS (API+): [M+H]+315.2.

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; Kawasaki, Masanori; Mikami, Satoshi; Nakamura, Shinji; Negoro, Nobuyuki; Ikeda, Shuhei; Nomura, Izumi; Ashizawa, Tomoko; Imaeda, Toshihiro; Seto, Masaki; Sasaki, Shigekazu; Marui, Shogo; Taniguchi, Takahiko; (130 pag.)US2016/159808; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics