Continuously updated synthesis method about C3H6N4

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Methyl-4H-1,2,4-triazol-3-amine, its application will become more common.

Synthetic Route of 4923-01-7,Some common heterocyclic compound, 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Method I. A mixture of Py (4.4 ml) and AcOH (3.0 ml) was stirred and treated by the addition of 5-aminoazole1a-h (0.01 mol) and (2E)-(3-morpholin-4-yl)-acrylonitrile (2) (1.38 g, 0.01 mol). The obtained mixture was refluxed at 150C for 5 h. After refluxing, the mixture was cooled. The precipitate that formed was filtered off, washed with a small amount of EtOH, and dried. Method II. A solution (or suspension) of the appropriate aminoazole 1a-h (0.01 mol) in solvent (15 ml) (EtOH in the case of compound 3a, dioxane in the case of compounds 3b-h) was stirred at 50C and treated by adding 3,3-diethoxypropionitrile (4) (1.5 ml, 0.01 mol), then 36% HCl solution (0.86 ml, 0.01 mol). The reaction mixture was refluxed for 2.5-3 h, the suspension (or solution) was cooled to room temperature, and the target product was isolated by the method indicated for each particular compound.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Methyl-4H-1,2,4-triazol-3-amine, its application will become more common.

Reference:
Article; Gazizov, Denis A.; Fedotov, Victor V.; Gorbunov, Evgeny B.; Ulomskiy, Evgeny N.; Yeltsov, Oleg S.; Rusinov, Gennady L.; Rusinov, Vladimir L.; Chemistry of Heterocyclic Compounds; vol. 55; 6; (2019); p. 573 – 577; Khim. Geterotsikl. Soedin.; vol. 55; 6; (2019); p. 573 – 577,5;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Brief introduction of 584-13-4

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4H-1,2,4-Triazol-4-amine, its application will become more common.

Application of 584-13-4,Some common heterocyclic compound, 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example – 2 4-Amino-1-[3,5-bis-(1-cyano-1-methylethyl)benzyl]-1H-[1,2,4]triazolium bromide (8) (Q. A.-Salt); Isopropanol (1.5 L), 3,5-bis-(1-cyano-1-methylethyl)benzylbromide (2) (100 g) and 4-amino-1,2,4-triazole (22.5 g) were charged in a flask at room temperature. The reaction mass was heated at 80 – 85 C for next 5 hours. The reaction mass was further cooled down to room temperature and stirred for next one hour at 25 – 35 C. The precipitated solid QA-salt was filtered and washed with fresh isopropanol (100 mL x 2). The Q.A.-salt was dried at 60 – 70 C till LOD is less than 1.0 %, giving solid product (74.4 g). m.p.: 198 – 200 C.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4H-1,2,4-Triazol-4-amine, its application will become more common.

Reference:
Patent; Cadila Healthcare Limited; EP2397472; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New downstream synthetic route of C2H3N3

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-36-8, name is 1H-1,2,3-Triazole, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 1H-1,2,3-Triazole

A solution of 2-iodobenzoic acid (3.0 g, 12.09 mmol) in DMF was treated with (1.5 g, 21.7 mmol) 1,2,3-triazole, 7.08 g (21.7 mmol) CsCO3, 114 mg (0.60 mmol) CuI and 310 mg (2.17 mmol) trans-N,N’-dimethylcyclohexane-1,2-diamine. The mixture was heated at 120 C. for 10 min in a microwave reactor. The reaction was cooled to rt, diluted with EtOAc, and filtered through Celite. The residue was purified by gradient elution on SiO2 (MeOH in DCM with 0.1% AcOH) to give the faster eluting desired 2-(2H-1,2,3-triazol-2-yl)benzoyl acid, A-1. Data for A-1: 1HNMR (500 MHz, DMSO-d6) delta 13.05 (br s, 1H), 8.12 (s, 2H), 7.81-7.52 (m, 4H) ppm. The undesired 2-(1H-1,2,3-triazol-2-yl)benzoic acid eluted second.

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Bergman, Jeffrey M.; Breslin, Michael J.; Coleman, Paul J.; Cox, Christopher D.; Mercer, Swati P.; Roecker, Anthony J.; US2008/132490; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some tips on C2H5N5

The synthetic route of 1455-77-2 has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1455-77-2

Acetophenone was used in place of 2-acetylthiophene in Reference Example 001 and heated to reflux in xylene in the presence of N,N-dimethylformamide diethyl acetal as in Reference Example 001, and 3-dimethylamino-1-phenylpropenone (yield 41percent) was obtained, which was subsequently reacted with 3,5-diamino-1,2,4-triazole in toluene in the presence of 10-camphor sulfonic acid and the title compound was obtained (yield 63percent).

The synthetic route of 1455-77-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NIPPON KAYAKU KABUSHIKI KAISHA; EP1674454; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Introduction of a new synthetic route about C3H5N3

According to the analysis of related databases, 16681-65-5, the application of this compound in the production field has become more and more popular.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C3H5N3

Example 123: tert-butyl-3-((4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(hydroxy)(1-methyl-1H-1,2,3-triazol-5-yl)methyl)azetidine-1-carboxylate To a flask containing 1 -methyl- 1 H- 1 ,2,3-triazole (430 mg, 0,8 mmol) was added THF (15 mL) and the solution was cooled to -43 C using a CH3CN-C02bath. Then, -BuLi, (2.5 M in hexanes, 0.7 mL, 1.75 mmol) was added dropwise. The reaction mixture was stirred at -40 C for 30 minutes, then tert-butyl-3-(4-chloro-2-methoxy-3-(4-(trifluoromethyr)benzyl)quinoline-6- carbonylj-azetidine- 1 -carboxylate (430 mg, 0.8 mmol, intermediate 61 : step b) in 2 mL THF was introduced. The reaction mixture was allowed to warm to room temperature over 30 minutes, and was quenched after 45 minutes with aqueous NH4C1 solution. The aqueous portion was extracted with EtOAc (3 x 30 mL). The combined organics were washed with brine, dried over MgS04, filtered and concentrated. Chromatography on Silica gel (10% acetone-hexane increasing to 30% acetone) afforded the title compound as a white amorphous solid. H NMR (500 MHz, CDCI3) 5 8.24 (d, J = 2.1 Hz, 1H), 7.78 (d, J= 8.8 Hz, IH), 7.56 – 7.47 (m, 3H), 7.40 (d. J ——- 8.1 Hz, 2H), 7.35 (dd, J = 8.7, 2.1 Hz, }. 4.35 (s, 2H), 4.20 (t, J = 8.8 Hz, IH), 4.07 (s,3H), 4.00 (dd, J = 9.3, 5.6 Hz, IH), 3.92 (dd, J = 8.9, 5.7 Hz, IH), 3.67 (s, 3H), 3.62 (t, J = 8.8 Hz, I H), 3.52 – 3.38 (m, IH), 1.38 (s, 9H); MS (ESI): mass calcd: Chemical Formula: C3oH3]ClF3504; Exact Mass: 617.2, m/z found 617.8 | M I I | .

According to the analysis of related databases, 16681-65-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Analyzing the synthesis route of C3H5N3

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Methyl-1H-1,2,3-triazole, and friends who are interested can also refer to it.

Adding a certain compound to certain chemical reactions, such as: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16681-65-5, HPLC of Formula: C3H5N3

To a flask containing 1-methyl-1H-1,2,3-triazole (100 mg, 1.2 mmol) was added THF (10 mL) and the colorless solution was cooled to -43 C. using a CH3CN-CO2 bath. Then, n-BuLi (2.5 M in hexanes, 490 muL, 1.23 mmol) was added dropwise which afforded an opaque mixture. The mixture was stirred at -40 C. for 30 minutes, then a homogeneous solution of (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(1-methyl-1H-imidazol-5-yl)methanone (255 mg, 0.54 mmol, Intermediate 80: step b) in 2 mL THF was introduced. After 5 minutes, the reaction mixture was then placed in an ice-water bath. The reaction was quenched after 20 minutes with aqueous NH4Cl solution and the aqueous portion was extracted with EtOAc (3*30 mL) and EtOAc:THF (1:1, 30 mL). The combined organics were washed with brine, dried over MgSO4, filtered and concentrated. The solid was triturated with MeOH and filtered to give a yellow filtrate which was concentrated and chromatographed on silica gel (3% MeOH-DCM increasing to 10% MeOH) to afford the title compound. 1H NMR (500 MHz, CDCl3) delta 8.22 (d, J=2.1 Hz, 1H), 7.76 (d, J=8.7 Hz, 2H), 7.49 (d, J=8.1 Hz, 2H), 7.41-7.35 (m, 3H), 7.10 (s, 1H), 6.99 (s, 1H), 6.22 (s, 1H), 4.29 (s, 2H), 4.07 (s, 3H), 3.89 (s, 3H), 3.41 (s, 3H). MS (ESI): mass calcd. for Chemical Formula: C26H22ClF3N6O2; Exact Mass: 542.14. m/z found 542.9 [M+H]+. (4-Chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(1-methyl-1H-1,2,3-triazol-5-yl)(1-methyl-1H-imidazol-5-yl)methanol was purified by chiral SFC (Stationary phase: CHIRALPAK AD-H 5 mum, 250*20 mm, Mobile phase: 80% CO2, 20% mixture of MeOH/iPrOH, 50/50 v/v (+0.3% iPrNH2)), to give Example 89b as the first compound eluted from the chiral column and Example 89c as the second compound eluted from the chiral column.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Methyl-1H-1,2,3-triazole, and friends who are interested can also refer to it.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; Jones, William Moore; Goldberg, Steven; US2015/105366; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Discovery of C2H3N3

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-88-0, name is 1H-1,2,4-Triazole, A new synthetic method of this compound is introduced below., HPLC of Formula: C2H3N3

To a solution of 1,2,4-triazole, 1 (27.6 g, 399.6 mmol) in dichloromethane (80 mL) was simultaneously added bromine in dichloromethane (50%v/v, 80 mL) and an aqueous solution of sodium hydroxide (50% w/v,96 mL). The rate of addition was such that the temperature of the reaction mass was maintained between 10-15C. After the complete addition, the temperature was raised to 25C and the stirring was continued for an additional 12 h. Into this was then added 6 N aq.HCl and stirring continued for 1 h.The solid thus precipitated was filtered, and dried under vacuum at 50C to afford 2 as an off-white solid(80 g, 90%). The product was used without further purification.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Roy, Bhairab Nath; Singh, Girij Pal; George, Shaji K.; Lathi, Piyush S.; Agrawal, Manoj K.; Trivedi, Anurag; Mishra, Madhan; Singh, Gajendra; Indian Journal of Chemistry – Section B Organic and Medicinal Chemistry; vol. 53; 5; (2014); p. 610 – 618;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Extracurricular laboratory: Synthetic route of C3H5N3O

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 74205-82-6, COA of Formula: C3H5N3O

General procedure: To a solution of indolines 6 (1.0 mmol) dissolved in acid (1.0 ml) in an icebath was added (1H-1,2,4-triazol-1-yl)methanol 5 (ammount as given in Table 1). Themixture was then stirred under the temperature and time given in Table 1. After completion of the reaction (TLC), the reaction mixture was poured intoice water, and 20% NaOH solution was added slowly to adjust the pH to 9. The product was extracted with dichloromethane. After removal of the solvent, theresidue was chromatographed over silica gel using dichloromethane-methanol togive 7 (yield as given in Table 1). The analytical and spectroscopic data for 7b and 7c are given below

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; He, Yi; Li, Xiaolong; Li, Jue; Li, Xiaocen; Guo, Li; Hai, Li; Wu, Yong; Tetrahedron Letters; vol. 55; 29; (2014); p. 3938 – 3941;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Analyzing the synthesis route of C2H2N3Na

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Synthetic Route of 41253-21-8, A common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A suspension of 2,5-diflurobenzonitrile (4.5 g, 32.35 mmol) and 1,2,4-triazole sodium salt (3.6 g, 40 mmol) in dimethylformamide (40 mL) was heated at 80 C. for 15 h. The reaction mixture was then cooled, diluted with CH2Cl2 (200 mL), washed with water (3×30 mL) and brine (30 mL), then dried (Na2SO4), filtered and concentrated to give a white solid which was purified by flash column chromatography (SiO2) using 1:1 to 3:1 ethyl acetate/Hexanes to afford the title compound (2.98 g, 49% yield) as a white powder. 1H NMR (500 MHz, CDCl3) delta: 8.70 (1H, s), 8.18 (1H, s), 7.76 (1H, dd, J=9.0, 4.8 Hz), 7.55 (1H, dd, J=7.3, 2.8 Hz), 7.51-7.47 (1H, m). LCMS (M+H) calcd for C9H6FN4: 189.17; found: 189.10.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/111984; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research on new synthetic routes about C2H4N4

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,4-Triazol-5-amine, other downstream synthetic routes, hurry up and to see.

Reference of 61-82-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of 2-aminobenzimidazole or 3-amino-1,2,4-triazole (1.0 mmol), arylaldehyde (1.0 mmol), dimedone (1.0 mmol), and 15 mol % p-TsOH.H2O was stirred in 5 cm3 acetonitrile as solvent at 40-50 C for the appropriate time (Table 3). The progress of the reaction was monitored by TLC. After completion of the reaction, a thick precipitate was obtained. The solid product was filtered off and washed with acetonitrile and subsequently dried in air. The pure product was characterized by conventional spectroscopic methods.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,4-Triazol-5-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Mousavi, Mir Rasul; Maghsoodlou, Malek Taher; Monatshefte fur Chemie; vol. 145; 12; (2014); p. 1967 – 1973;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics