Tag: M.W=0-100

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, A new synthetic method of this compound is introduced below., Product Details of 16681-65-5

Intermediate 13: bis(1-methyl-1H-1,2,3-triazol-5-yl)methanoneA solution of 1 -methyl- lH-1, 2, 3-triazole (0.954 g, 11.4 mmol, prepared according to PCX Int. AppL, 2008098104) in THF (22 mL) was stirred at-70 C under argon while -BuLi (2.56 M in hexanes, 4.29 mL, 11.0 mmol) was added dropwise over 5 minutes. After stirring for another 5 minutes, a solution of ethyl mefhoxy(methyl)carbamate (0.665 g, 4.99 mmol) in THF (3 mL) wras added dropwise over 5 minutes. After stirring at ~-70 C for an additional 5 minutes, the cold bath was removed and the light slurry was allowed to warm to room temperature with stirring for 1 hour 20 minutes. The reaction was then quenched at room temperature with 5 M aqueous H4CI (3 mL) and the aqueous layer was extracted with THF (1 x 6 mL). The combined organic layers were dried (Na2S04), filtered, and concentrated. A portion of the residue was crystallized from -’30 mL toluene to provide, after washing the filter cake with ether (1 > 3 mL) and heptane (1 x 3 mL), to yield the title compound as blunt needles.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 584-13-4,Some common heterocyclic compound, 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4H-1,2,4-Triazol-4-amine, its application will become more common.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 41253-21-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 41253-21-8 name is Sodium 1,2,4-triazol-1-ide, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

(2) Prepare a thermometer, a condenser,Add 250 ml of DMF and 1,2,4-triazole sodium salt (18.5 g 203 mmol) to a 250 ml four-neck reaction flask of a stirrer.Add 1-chloro-2-(4-chlorophenyl)-3-cyclopropylbutan-2-ol (44 g, 170 mmol),Heat to 100 C, reaction 60 ~ 100min, sample analysis,When the content of 1-chloro-2-(4-chlorophenyl)-3-cyclopropylbutan-2-ol is less than 1%,It is considered as the end of the reaction. Cool to room temperature,The reaction droplets were added to 120 ml of cold water.The precipitated solid was stirred, filtered, washed with water, dried.A cyproconazole having a content of 96% was obtained in a weight yield of 90%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Sodium 1,2,4-triazol-1-ide, and friends who are interested can also refer to it.

Reference:
Patent; Huai’an Guorui Chemical Co., Ltd.; Zhang Pu; Li Ming; Jin Yucun; Chen Chao; Zhong Yu; Chen Mingguang; Wang Fengyun; (8 pag.)CN109400542; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 3-Methyl-1H-1,2,4-triazole

A mixture of 3-methyl-lH-l,2,4-triazole (15.0 g, 181 mmol), l,2-difluoro-4-nitrobenzene (28.7 g, 181 mmol), and sodium bicarbonate (15.2 g, 181 mmol) in DMSO (100 mL) was heated at 80 C for 48 h. The reaction mixture was allowed to cool to rt and was poured into water (800 mL). The aqueous mixture was extracted with EtOAc (3 x 200 mL). The combined organic extracts were sequentially washed with water (500 mL) and brine solution (100 mL). The organic layer was dried over sodium sulfate, filtered, and concentrated in vacuo. The crude reaction mixture was purified using silica gel chromatography (30-80% EtOAc/hexane, linear gradient) to afford two regioisomeric products. Pure fractions of the less polar regioisomer were combined and concentrated to afford l-(2-fluoro-4-nitrophenyl)-3-methyl-lH-l,2,4-triazole (7.2 g, 30.8 mmol, 17 % yield) as an off-white solid. Data for l-(2-fluoro-4-nitrophenyl)-3-methyl-lH-l,2,4- triazole [Bl]: LC-MS (M+H)+ = 223.1. XH NMR (500 MHz, CDC13) delta ppm 8.73 (d, J=2.7 Hz,l H), 8.15 – 8.26 (m, 3 H), 2.53 (s, 3 H). Pure fractions of the more polar regioisomer were combined and concentrated to afford l-(2-fluoro-4-nitrophenyl)-5- methyl-lH-l,2,4-triazole (6.23 g, 15 % yield) as an off-white solid. Data for l-(2-fluoro- 4-nitrophenyl)-5-methyl-lH-l,2,4-triazole [CI]: LC-MS (M+H)+ = 223.1. ‘H NMR (500 MHz, CDC13) delta ppm 8.18 – 8.24 (m, 2 H), 8.04 (s, 1 H), 7.69 – 7.78 (m, 1 H), 2.47- 2.53 (m, 3 H).

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; BOY, Kenneth M.; GUERNON, Jason M.; MACOR, John E.; THOMPSON III, Lorin A.; WU, Yong-Jin; ZHANG, Yunhui; WO2012/9309; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The molar ratio of 9,10-dibromoanthracene: 1H-1,2,4-triazole: potassium carbonate: copper oxide is 2: 10-15: 30: 1In the magnet,A 50 mL three-necked round bottom flask equipped with a reflux condenser and a thermometer was charged with CuO (0.0398 mg, 0.5 mmol)Potassium carbonate (2.0731 g, 15 mmol),Triazole (0.345 mg, 5 mmol),9,10-dibromoanthracene (0.3360 g, 1 mmol),20 mL DMF.Start stirring at 100 oC,Reaction for 24 hours.After the reaction,The reaction solution was cooled to room temperature,Filtration, the filtrate was added 100 mL of water,Precipitation precipitation, filtration,The filter cake was collected in a yield of 60%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-1,2,3-Triazole, its application will become more common.

Reference:
Patent; Tianjin Normal University; Wang Zhongliang; Yang Xi; Guo Changcheng; Shang Yuntao; Zhang Zhigang; Wang Ying; (11 pag.)CN106188104; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-65-5, A common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solutionofn-butyllithiuminhexanes(2.5 M, 0.32 mE, 0.81 mmol) was added dropwise to a stirring solution of i-methyl-1H-i,2,3-triazole (70.4 mg, 0.848 mmol, prepared according to PCT Int. Appl., 2008098104) in tetrahydrofuran (1 mE) at -50C. After 20 minutes, a solution (gently warmed with a heat gun to dissolve the ketone starting material) of (3-(4-(1H-pyrazol-i -yl)benzyl)-4-chloro-2-methoxyquino- lin-6-yl)(i ,2-dimethyl- 1H-imidazol-5-yl)methanone (200 mg, 0.42 mmol, Intermediate 21: step b) in tetrahydroffiran (1 mE) was added dropwise. After 5 minutes, the flask was allowed to warm to 23C. After 20 minutes, water (1 mE) was added. The biphasic mixture was partitioned between saturated aqueous sodium chloride solution (25 mE) and ethyl acetate (50 mE). The layers were separated and the organic layer was dried with sodium sulfate. The dried solution was filtered. Silica gel (2 g) was added to the filtrate and the mixture was concentrated by rotary evaporation to afford a free-flowing powdet The powder was loaded onto a silica gel colunm for flash column chromatography purification. Elution with dichloromethane initially, grading to 10% methanol-dichloromethane provided the title compound which was further purified by RP-HPEC eluting initially with 5% acetonitrile-water (containing 0.05% trifluoroacetic acid), grading to 95% acetonitrile-water (containing 0.05% trifluoroacetic acid) to provide the title compound as a white solid after partitioning the purified material between dichloromethanesaturated aqueous sodium bicarbonate solution, separating the layers, drying the organic layer with sodium sulfate, filtering the dried solution, and concentrating the filtrate to dryness. ?H NMR (400 MHz, CDC13) oe ppm 8.21 (s, 1H), 7.85 (d, J=2.4 Hz, 1H), 7.74 (d, J=8.8 Hz, 1H), 7.67 (d, J=i.7 Hz, 1H), 7.60-7.53 (m, 2H), 7.41-7.33 (m, 3H), 7.11 (d, J=i .4 Hz, 1H), 6.46-6.39 (m, 1H), 6.08-6.02 (m, 1H), 4.27 (s, 2H), 4.08 (s, 3H), 3.89 (s, 3H), 3.35 (s, 3H), 2.20 (s, 3H); MS (ESI):mass calcd. for C29H27C1N802, 554.2. mlz found, 555.2 [M+H].j0650] (3-(4-(i H-Pyrazol- 1 -yl)benzyl)-4-chloro-2-meth- oxyquinolin-6-yl)(i ,2-dimethyl-i H-imidazol-5-yl)(i -methyl-1H-i,2,3-triazol-5-yl)methanol was purified by chiral SFC (Chiralpak AD-H, 5 pm, 250×20 mm, mobile phase:55% C02, 45% methanol containing 0.03% isopropylamine) to provide two enantiomers. The first eluting enantiomer was Example 19b: ?H NMR (500 MHz, CDC13) oe ppm 8.17 (d, J=2.2 Hz, 1H), 7.88-7.84 (m, 1H), 7.78 (d, J=8.7 Hz, 1H), 7.70-7.66 (m, 1H), 7.61-7.55 (m, 2H), 7.41-7.34 (m, 3H),7.18 (s, 1H), 6.47-6.39 (m, 1H), 6.16 (s, 1H), 4.32 (s, 2H),4.10 (s, 3H), 3.92 (s, 3H), 3.40 (s, 3H), 2.33 (s, 3H); MS (ESI):mass calcd. for C29H27C1N802, 554.2. mlz found, 555.5 [M+H] + and the second eluting enantiomer was Example 1 9c:?H NMR (500 MHz, CDC13) oe ppm 8.18 (d, J=2.2 Hz, 1H), 7.85 (d, J=2.5 Hz, 1H), 7.76 (d, J=8.8 Hz, 1H), 7.68 (d, J=1.7 Hz, 1H), 7.61-7.55 (m, 2H), 7.42-7.34 (m, 3H), 7.17 (s, 1H), 6.43 (t, J=2.i Hz, 1H), 6.13 (s, 1H), 4.31 (s, 2H), 4.10 (s, 3H),3.91 (s, 3H), 3.39 (s, 3H), 2.31 (s, 3H)

The synthetic route of 16681-65-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; Jones, William Moore; Goldberg, Steven; US2015/105366; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below., Formula: C2H3N3

To a mixture of 2-bromo-4-fluorobenzoic acid (30 g, 137 mmol), cesium carbonate (89.26 g, 274 mmol) and Cul (5.27 g, 27.4 mmol) in DMF (200 mL) were added N,N’-dimethylcyclohexane-1,2-diamine (3.7 mL,23.3 mmol) and 1H-1,2,3-triazole (18.92 g, 274 mmol). The resulting mixture was stirred at 110C overnight, cooled, concentrated in vacuo and diluted with water (150 mL). The aqueous layer was extracted with EtOAc (300 mL x 3). The aqueous layer was acidified with 2N HCl and extracted with EtOAc (300 mL x 4). The combined organic layers were washed with brine (150 mL x 3), dried over Na2SO4, filtered andthe filtrate concentrated in vacuo. The residue was purified by chromatography on silica gel (petroleum ether : EtOAc = 100: 1 ~ 5 : 1) to provide the title compound as a yellow solid. LRMS m/z (M+H) 208.0 found, 208.0 required.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; BESHORE, Douglas C.; KUDUK, Scott D.; LUO, Yunfu; MENG, Na; YU, Tingting; WO2015/18027; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, Formula: C3H5N3

Intermediate 596-(5-Methyl-1 H-1 ,2,3,4-tetrazoH -yl)pyridine-3-carboxylic acid To a solution of methyl 6-aminopyhdine-3-carboxylate (1 .52 g) in dichloromethane (10 mL) and pyridine (3 mL) is added acetic anhydride (2 g) and the solution is stirred at r.t. overnight. After concentration water and dichloromethane are added and the organic layer is separated, washed with saturated aqueous CuSO4, then water, dried over MgSO4 and concentrated. The N-acyl compound is dissolved in MeCN (20 mL) and sodium azide (4 g) and SiCI4 (4 mL) are added and the mixture is stirred at r.t. overnight. The reaction is quenched by slow addition to an ice/NaHCO3 mixture and extracted with ethyl acetate. The organic extracts are dried over MgSO4 and concentrated. The crude ester is dissolved in MeOH (30 mL) and 4 M NaOH (3 mL) is added and stirred at r.t. for 2 h. The mixture is neutralized to pH 7 with 6 M HCI, concentrated and then acidified with 6 M HCI and the precipitate is filtered off washing with water and dried by suction to give the title compound. LC (method 20): tR = 1 .52 min; Mass spectrum (APCI): m/z = 206 [M+H]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; NEUROCRINE BIOSCIENCES, INC.; HECKEL, Armin; HIMMELSBACH, Frank; LANGKOPF, Elke; NOSSE, Bernd; ASHWEEK, Neil, J.; HARRIOTT, Nicole; WO2012/168315; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-65-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 16681-65-5 name is 1-Methyl-1H-1,2,3-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Example 57 Cis-(1S)-N-methyl-7-(5-(N(1)methyl-1,2,3-triazolyl)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-1-naphthalenamine To a solution of N(1)-methyl-1,2,3-triazole (Prepared by the general method described in J. Chem. Soc., Perkin Trans. I, 1973, 2506) (0.115g, 0.00139mol) in tetrahydrofuran (2ml) at -78C under nitrogen was added n-butyllithium (2.5M solution in hexane) (0.00139mol) and after 15 minutes, zinc chloride (0.00139mol) (0.5M solution in tetrahydrofuran). The reaction was warmed to 0C and tetrakis(triphenylphosphine)palladium (0.053g) and a solution of the iodide product of Example 1(a) (0.2g, 0.00046mol) in tetrahydrofuran (5ml) added and the reaction heated at reflux for 16 hours. The reaction was cooled to room temperature, saturated aqueous ethyldiamine tetra-acetic acid di-sodium salt solution was added, the mixture stirred for 30 minutes, water was added and the mixture extracted with ethyl acetate. The organic phase was washed with saturated aqueous sodium bicarbonate, brine and dried (MgSO4). The solution was filtered and the solvent removed under reduced pressure. The crude product was purified on silica gel eluding with 100: 2.5: 1 dichloromethane: methanol: 0.88 ammonia to give the title compound as a pale yellow foam (0.148g, 83%). MS m/z 387 (MH)+ 1H-NMR (CDCl3): delta = 1.90 (1H, m), 2.05 (3H, m), 2.55 (3H, s), 3.77 (1H, t), 4.04 (1H, t), 4.10 (3H, s), 6.93 (1H, dd), 7.00 (1H, dd), 7.16 (1H, dd), 7.26 (1H, s), 7.38 (1H, dd), 7.46 (1H, s), 7.70 (1H, s).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Methyl-1H-1,2,3-triazole, and friends who are interested can also refer to it.

Reference:
Patent; Pfizer Limited; PFIZER INC.; EP1157002; (2005); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1455-77-2, These common heterocyclic compound, 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: An equimolar solution of 3,5-diamino-1,2,4-triazole (0.99 g, 0.01 mol) and 2-hydroxynaphthaldehyde (1.72 g, 0.01 mol) in dry methanol (50 mL) was refluxed for 3 h, a precipitated product was formed during refluxing. It was then cooled to room temperature, filtered, washed with methanol (35 mL), then with diethyl ether (2 × 5 mL) and dried under vacuum. Recrystallization in a mixture of methanol:dioxane (1:4) gave TLC pure product (L1) in 83percent yield. The same method was applied for the preparation of all other ligands (L2)?(L5).

The synthetic route of 1455-77-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sumrra, Sajjad H.; Chohan, Zahid H.; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 98; (2012); p. 53 – 61;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics