Tag: M.W=0-100

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C3H5N3

2-(5-Bromo-1-methyl-1H-imidazol-2-yl)-6-chloro-3-(ethylsulfonyl)pyridine (200 mg, 0.55 mmol, 1.0 eq) was dissolved in 42 dimethylformamide (5 ml), and 50% 41 sodium hydride (32 mg, 0.66 mmol, 1.1 eq) was added. Subsequently, the mixture was cooled to 0 C. 70 3-methyl-1H-1,2,4-triazole (50 mg, 0.61 mmol, 1.1 eq) was added thereto, and then stirred overnight at room temperature. The aforementioned reaction solution was added to a saturated aqueous solution of 48 sodium hydrogen carbonate, and extraction with ethyl acetate was carried out. The obtained organic layer was washed with water and a saturated aqueous solution of 24 sodium chloride, dried over anhydrous magnesium sulfate, and filtered. The filtrate was concentrated under reduced pressure, and the obtained residue was purified by column chromatography with silica gel. Thereby, the objective 71 product was obtained in an amount of 91 mg (yield 40%).1H-NMR of the obtained objective product is shown below. 1H-NMR (400 MHz, CDCl3) delta: 9.04 (1H, s), 8.61 (1H, d), 8.07 (1H, d), 7.17 (1H, s), 3.84 (2H, q), 3.65 (3H, s), 2.53 (3H, s), 1.35 (3H, t).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 7170-01-6

Reference:
Patent; Nippon Soda Co., Ltd.; SAKANISHI, Keita; IWASA, Takao; AOYAMA, Hikaru; SAKIYAMA, Norifumi; USHIJIMA, Daisuke; MATSUI, Maki; KOBAYASHI, Tomomi; US2019/185459; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 60166-43-0, name is 1,4-Dimethyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 60166-43-0

(S)-3-bromo-7-(methylsulfonyl)-5-(phenyl(tetrahydro-2H-pyran-4-yl)methyl)-5H- pyrrolo[2,3-b:4,5-b’]dipyridine (30 mg, 0.060 mmol) was dissolved in 1.5 mL of NMP and added l,4-dimethyl-lH-l,2,3-triazole (9.3 mg, 0.096 mmol). Tetramethylammonium acetate (12.0 mg, 0.090 mmol) and bis(triphenylphosphine)palladium(II) chloride (3.0 mg, 4.20 muetaiotaomicron) were added. Argon was bubbled through the mixture while sonicating for 5 min. The vial was capped and heated at 100 C for 33 h, then cooled and the contents of the vial were filtered. The crude material was purified via preparative LC/MS with the following conditions: Column: XBridge CI 8, 19 x 200 mm, 5-muiotatauiota particles;Mobile Phase A: 5:95 methanol: water with 10-mM NH4OAC; Mobile Phase B: 95:5 methanol: water with 10-mM ammoniumacetate; Gradient: 45-85% B over 15 min, then a 5-min hold at 100% B; Flow: 20 mL/min. Fractions containing the desired product were combined and dried via centrifugal evaporation. The yield of the product was 2.8 mg (9%), and its estimated purity by LCMS analysis was 100%. Two analytical LC/MS injections were used to determine the final purity. Injection 1 conditions: Column: Waters BEH CI 8, 2.0 x 50 mm, 1.7-muiotaeta particles; Mobile Phase A: 5:95 ACN:water with 10 mM Nl UOAc; Mobile Phase B: 95:5 ACN:water with 10 mM NH4OAc; Temperature: 50 C; Gradient: 0%B, 0-100% B over 3 min, then a 0.5-min hold at 100% B; Flow: 1 mL/min; Detection: UV at 220 nm. RT = 2.27, M+H = 517. Injection 2 conditions: Column: Waters BEH C18, 2.0 x 50 mm, 1.7-mupiiota particles; Mobile Phase A: 5:95 methanol: water with 10 mM NEUOAc; Mobile Phase B: 95:5 methanol: water with 10 mM NlrUOAc; Temperature: 50 C; Gradient: 0%B, 0-100% B over 3 min, then a 0.5-min hold at 100% B; Flow: 0.5 mL/min; Detection: UV at 220 nm. RT = 2.27, M+H = 517. NMR (500MHz, DMSO- de) delta 8.96 (d, J=8.1 Hz, 1H), 8.76 (s, 2H), 8.05 (d, J=8.1 Hz, 1H), 7.83 (d, J=7.7 Hz, 2H), 7.33 (t, J=7.5 Hz, 2H), 7.26 (t, J=7.3 Hz, 1H), 5.93 (br. s., 1H), 4.07 (s, 3H), 3.95 – 3.83 (m, 1H), 3.82 – 3.60 (m, 2H), 3.47 – 3.36 (m, 1H), 3.31 – 3.19 (m, 1H), 2.34 (s, 3H), 1.59 – 1.49 (m, 1H), 1.49 – 1.38 (m, 1H), 1.38 – 1.22 (m, 1H), 1.16 (d, J=12.1 Hz, 1H).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 60166-43-0.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; NORRIS, Derek J.; VACCARO, Wayne; DEBENEDETTO, Mikkel V.; DEGNAN, Andrew P.; DELUCCA, George V.; DESKUS, Jeffrey A.; HAN, Wen-Ching; KUMI, Godwin Kwame; SCHMITZ, William D.; STARRETT, John E., JR.; HILL, Matthew D.; HUANG, Hong; (563 pag.)WO2016/183118; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 10570-40-8, name is 4-Methyl-4H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C3H5N3

A solution of 4-methyl-1,2,4-triazole (1:08 g, 13 mmol) and DNPH (2:60 g, 13 mmol) in CH2Cl2 (20 mL) was stirred at 20 C for 4 d. The product precipitated and was collected by filtration, washed with CH2Cl2 (5 mL) and Et2O (5 mL), and dried to yield 2.45 g (67%) of a yellow powder. – 1H NMR (300 MHz, [D6]DMSO): delta = 3:84 (s, 3H), 6.32 (d, J =9:7 Hz, 1H), 7.41 (s, 2H), 7.77 (dd, J = 9.7 Hz, J = 3.1 Hz, 1H), 8.59 (d, J = 3.1 Hz, 1H), 8.98 (s, 1H), 9.98 ppm. – 13C NMR (75 MHz, [D6]DMSO): delta = 34:1, 125.0, 126.5, 127.4, 136.0, 140.7, 143.4, 170:3 ppm. – IR (neat): nu = 3294 w, 3236 w, 3081 m, 2988 m, 1595 s, 1550 m, 1525 s, 1475 m, 1431 m, 1371 m, 1307 s, 1258 s, 1175 m, 1128 s, 983 m, 834 s, 710 m, 654 m, 618 s cm-1. – C9H10N6O5 (282.21): calcd. C 38.30, H 3.57, N 29.78; found C 38.28, H 3.42, N 29.40.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 4-Methyl-4H-1,2,4-triazole ,and how the biochemistry of the body works.

Reference:
Article; Laus, Gerhard; Kahlenberg, Volker; Wurst, Klaus; Schottenberger, Herwig; Zeitschrift fur Naturforschung – Section B Journal of Chemical Sciences; vol. 69; 9-10; (2014); p. 950 – 964;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of Sodium 1,2,4-triazol-1-ide

A mixture of 2,3-difluorobenzylnitrile (2.27 g, 16.3 mmol) and triazole sodium salt (1.33 g, 14.8 mmol) in tetrahydrofuran (5 mL) and dimethylformamide (10 mL) was stirred at 85 C. for 4 h. After concentration, the residue was purified by flash chromatography (SiO2) eluting with 25%-50% ethyl acetate/hexane. The isolated product was recrystallized from hot ethyl acetate/hexane to give the title compound as white needles (1.51 g, 54% yield). 1H-NMR (500 MHz, CDCl3) ? ppm: 8.50 (1H, d, J=2.4 Hz), 8.25 (1H, s), 7.69-7.67 (1H, m), 7.60-7.57 (2H, m). LCMS [M+H]+ calcd for C9H6N4F: 189.16; found: 189.14.

If you are hungry for even more, make sure to check my other article about 41253-21-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Naidu, B. Narasimhulu; Banville, Jacques; Beaulieu, Francis; Connolly, Timothy P.; Krystal, Mark R.; Matiskella, John D.; Ouellet, Carl; Plamondon, Serge; Remillard, Roger; Sorenson, Margaret E.; Ueda, Yasutsugu; Walker, Michael A.; US2005/267105; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

in a polar solvent,DMF, 9,10-dibromoanthracene, triazole, potassium carbonate and copper oxide inthe preparation of the organic compound under heating; 9,10-dibromoanthracenewherein: three azole: potassium carbonate: copper oxide molar ratio of 2: 10:30: 1; The reaction temperature is1500 C, the reaction time of 18 hours

If you are hungry for even more, make sure to check my other article about 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Tianjin Normal University; WANG, YING; (12 pag.)CN104497023; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-36-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The 2 H – 1, 2, 3 – triazole (3.45 g, 50 mmol), 2 – iodo -5 – methyl benzoic acid (5.24 g, 20 mmol), cesium carbonate (11.72 g, 36 mmol), trans – N, N’ – dimethyl – 1, 2 – diaminocyclohexane (0.51 g, 3.6 mmol), cuprous iodide (0.38 g, 2 mmol) and N, N – dimethyl formamide (30 ml) are added to the 100 ml round bottom flask in a single port, under the protection of nitrogen reaction solution gradually raising the temperature to 100 C reaction 4 hours. Stopping the reaction, cooling, liquid water (60 ml) diluted with water and ethyl acetate (200 ml × 2) extraction. The water layer is acidified to pH concentrated hydrochloric acid for 1 – 2, then adding ethyl acetate (200 ml × 2) extraction, the resulting organic layer dried with anhydrous sodium sulfate, filtered, filtrate turns on lathe does after separation and purification by column chromatography (dichloromethane/methanol (v/v)=50/1) to obtain the title compound (yellow solid, 2.76 g, 68%).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,3-Triazole.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Zhang Yingjun; Xue Yaping; Lao Jinhua; Nie Biao; Xu Juan; (35 pag.)CN107759620; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 16681-65-5

Example 93: (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(3,5-dimethylisoxazol-4-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol To a flask containing 1 -methyl- lH-1, 2, 3-triazole (200 mg, 2.41 mmol) was added THF (17 mL) and the solution was cooled to -43 C using a CH3CN-CQ2bath. -BuLi, (2,5 M in hexanes, 0.88 mL, 2.19 mmol) was then added dropwise to provide a white suspension. The suspension was stirred at -40 C for 20 minutes, then a homogeneous solution of (4-chloro-2-methoxy-3-(4- (trifluoromethyl)benzyl)quinolii^ (500 mg, 1.05 mmol, Intermediate 63: step b) in 2 ml, TFIF was introduced. A dark brownish solution immediately resulted. The reaction mixture was allowed to warm gradually to 0 C over 25 minutes, then was quenched with aqueous H4CI solution. The aqueous portion was extracted with EtOAc (3 x 35 mL) and the combined organics were washed with brine, dried over MgS04, filtered and concentrated to dryness. The residue was purified by FCC (20% EtOAc-hexanes increasing to 50% EtOAc) to provide the title compound as a white solid. H NMR (500 MHz,CDC ) delta 8.08 (d, J —— 2.1 Hz, 1 H), 7.85 (d, J —— 8.7 Hz, IH), 7.61 – 7.46 (m, 3H), 7.39 (d, J —— 8.1Hz, 2H), 6.94 (s, IH), 4.81 (s, IH), 4.32 (s, 2H), 4.09 (s, 3H), 3.98 (s, 3H), 1.95 (s, 3H), 1.82 (s, 3H); MS (ESI): mass calc. for Chemical Formula: C27H23CIF3N5Q3; Exact Mass: 557.1, m z found, 557.9 (M+H).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 16681-65-5

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

To a round-bottomed flask equipped with an overhead magnetic stirrer, reflux condenser, and nitrogen inlet were added 2-Fluoro-6-iodobenzoic acid (2.5 g, 9.4 mmol), Cul (0.09 g, 0.47 mmol), and CS2CO3 (6.1 g, 18.8 mmol). To these solids were added dioxane (12.5 ml_), water (0.05 ml_), 1 H-1 ,2,3-triazole (1.09 ml_, 18.8 mmol), and finally (1 R,2R)-N1 ,N2-dimethylcyclohexane-1 ,2-diamine (0.3 ml_, 1.88 mmol). The mixture was then warmed to 100 C ON. The day after the mixture was cooled and MTBE and water were added. After vigorous mixing, the layers were separated and the bottom aqueous layer was acidified to pH 2 with 6N HCI. The aqueous phase was then extracted with DCM (3x). The combined organic layers were dried, and concentrated The residue was purified by FC on S1O2 column (eluent : from DCM to DCM:MeOH 90:10) to afford 2-fluoro-6-(2H-1 ,2,3-triazol-2-yl)benzoic acid (p186, 1.1 g, y= 56%). MS (m/z): 208.0 [M+H]+

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-1,2,3-Triazole help many people in the next few years.

Reference:
Patent; CHRONOS THERAPEUTICS LIMITED; MICHELI, Fabrizio; BERTANI, Barbara; GIBSON, Karl Richard; DI FABIO, Romano; RAVEGLIA, Luca; ZANALETTI, Riccardo; CREMONESI, Susanna; POZZAN, Alfonso; SEMERARO, Teresa; TARSI, Luca; LUKER, Timothy Jon; (275 pag.)WO2019/43407; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 584-13-4, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 4H-1,2,4-Triazol-4-amine.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 41253-21-8

Example 4 Selectivity in the Preparation of Intermediate III The procedure of Example 3 was repeated with various solvents and bases, and the reaction mixtures were analyzed using HPLC to determine the ratio of intermediate III to isomer IV impurity. Solvents used were acetonitrile (ACN), chloroform (CHCl3), dimethylformamide (DMF), dichloromethane (CH2Cl2), acetone, CH(OC2H5)2, N-methyl-2-pyrrolidone (MP), dimethylacetamide (DMA), methanol, water, toluene, and mixtures thereof. Bases used were sodium iodide (NaI), potassium t-butoxide (KOtB), potassium hydroxide (KOH), potassium carbonate (K2CO3), potassium iodide (KI), commercial sodium triazolate (NAT), tetrabutyl ammonium hydroxide (TBAI), and mixtures thereof. The results are summarized in Table 1 below, in which the units of dilution are parts by weight of solvent based on the weight of the 4-(bromomethyl)benzonitrile. As illustrated in Table 1, choice of solvent has the largest effect on the resulting ratio of intermediate III to isomer IV impurity. Choice of base, dilution, and reaction times/temperatures also affect the ratio of intermediate III to isomer IV impurity, but to a lesser degree. Dimethylacetamide solvent showed the most selectivity for intermediate III, followed by methylpyrrolidone.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 41253-21-8, and we look forward to future research findings.

Reference:
Patent; MacDonald, Peter Lindsay; Bigatti, Ettore; Rossetto, Pierluigi; Harel, Zvi; US2007/66831; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics