A new synthetic route of 7170-01-6

This is the end of this tutorial post, and I hope it has helped your research about 7170-01-6!

Electric Literature of 7170-01-6, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

EXAMPLE 8 In a sealed tube dicarbonyl intermediate 10 (50 mg, 0.13 mmol), 3-methyl-1,2,4-triazole (52 mg, 0.75 mmol) and copper powder (16 mg, 0.25 mmol) were combined and heated at 140 C. with microwaves for 1 h. The reaction was diluted with MeOH (3 mL), filtered through celite and the filtrate was purified by preparative HPLC to yield 16 (3 mg, 0.007 mmol, 5%) as a yellow solid. 1H NMR: (500 MHz, CD3OD) delta 8.97 (s, 1H), 8.61 (s, 1H), 8.28 (s, 1H), 8.27 (s, 1H), 7.52-7.40 (m, 5H), 4.02-3.44 (m, 8H); LC/MS: (ES+) m/z (M+H)+=431; HPLC Rt=0.82 min., column G, conditions B.

This is the end of this tutorial post, and I hope it has helped your research about 7170-01-6!

Reference:
Patent; Bender, John A.; Yang, Zhong; Kadow, John F.; Meanwell, Nicholas A.; US2005/124623; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Extracurricular laboratory: Synthetic route of 288-36-8

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,3-Triazole.

Reference of 288-36-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Combine 1,2,3-triazole (3.45g, 50mmol), 2-iodo-5-methylbenzoic acid (5.24g, 20mmol), cesium carbonate (11.72g, 36mmol), trans-N, N ‘ -Dimethyl-1,2-cyclohexanediamine (0.51g, 3.6mmol), cuprous iodide (0.38g, 2mmol), N, N-dimethylformamide (30mL) were added to 100mL single-port round In a bottom flask, the temperature was gradually raised to 100 C under nitrogen protection for 4 hours. The reaction was stopped, cooled, diluted with tap water and extracted with ethyl acetate (200 mL × 2).The aqueous layer was acidified with concentrated hydrochloric acid (pH = 1-2) and extracted with ethyl acetate (200 mL × 2). The organic layers were combined, dried over anhydrous sodium sulfate, filtered, and the filtrate was evaporated to dryness under reduced pressure and purified by column chromatography ( Dichloromethane / methanol (v / v) = 50/1) gave the title compound (yellow solid, 2.76 g, 68%).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,3-Triazole.

Reference:
Patent; GUANGDONG HEC PHARMACEUTICAL; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; JIN CHUANFEI; Jin Chuanfei; LAO JINHUA; Lao Jinhua; ZHANG YINGJUN; Zhang Yingjun; (35 pag.)CN108299437; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Brief introduction of 41253-21-8

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to Sodium 1,2,4-triazol-1-ide help many people in the next few years.

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 41253-21-8

5-(2-Bromo-5-fluoro-phenyl)-1-methyl-2H-tetrazole. A mixture of 5-(2-bromo-5-fluoro-phenyl)-1H-tetrazole (1.0 g, 4.12 mmol), iodomethane (1.12 g, 10 mmol) and potassium carbonate (1.5 g) in dimethylformamide (5 mL) was stirred at room temperature for 16 hrs, then concentrated in vacuo. The residue was purified by column chromatography (SiO2, CH2Cl2) to provide 350 mg (Yield 33%) of the title compound as white crystals. 1H NMR (500 MHz, CDCl3) delta ppm: 4.00 (3H, s) 7.18-7.25 (2H, m) 7.72 (1H, dd, J=8.4, 5.0 Hz); 13C NMR (126 MHz, CDCl3) delta ppm: 34.59, 117.73, 119.58, 120.43, 127.57, 135.11, 153.43, 161.69. LC/MS m/z 257/259.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to Sodium 1,2,4-triazol-1-ide help many people in the next few years.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/129379; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Analyzing the synthesis route of 1H-1,2,3-Triazole

In the meantime we’ve collected together some recent articles in this area about 288-36-8 to whet your appetite. Happy reading!

Electric Literature of 288-36-8, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

2H-1,2,3-Triazole (760 mg, 11 mmol) was added to a suspension of 2,3-dichloro-5-nitro-pyridine (965 mg, 5 mmol) and anhydrous potassium carbonate (1.03 g, 7.5 mmol) in THF (50 mL), and the mixture was stirred overnight at room temperature. The mixture was diluted with EtOAc (100 mL), washed with water and brine, and the organic phase was dried over anhydrous sodium sulfate, filtered and concentrated. The residue was purified by silica chromatography (hexane: EtOAc = 5:1 to 1:1) to give the title compound (505 mg, 44%). ?H NMR (400 MHz, DMSO-d6): 9.39 (d, 1H), 9.15 (d, 1H), 8.34 (s, 2H).

In the meantime we’ve collected together some recent articles in this area about 288-36-8 to whet your appetite. Happy reading!

Reference:
Patent; CORNELL UNIVERSITY; CHILDREN’S MEDICAL CENTER CORPORATION; DANA-FARBER CANCER INSTITUTE, INC; GRAY, Nathanael, S.; SCOTT, David, A.; HATCHER, John; DU, Guangyan; MELNICK, Ari, M.; GABAS, Lorena, Fontan; CASALENA, Gabriella; US, Ilkay; WU, Hao; QIAO, Qi; (178 pag.)WO2018/165385; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The Best Chemistry compound: 288-36-8

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 288-36-8.

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 1H-1,2,3-Triazole

To 2H-I,2,3-triazoe (2.0 g, 29 rnmo) n DMF (145 mL) was added NaH (116 g, 29 mmo, 60/b n mnera o) at RT and the mixture was sfirred for lh. After coohng to 0C, 2-choro-I-fluoro-4-ntrobenzene (4.6 g, 26.1 rnmo) was added and the reacUon mixture was stirred at 0C for l.5h, then at RT for I.5h. The mixture was quenched with water and extracted with AcOEt, The organic phase was washed with water and brine, dried over Na2SO4, fitered and concentrated. The crude product was purified by sihca g& co?umn (heptane/AcOEt: 90/10 to 50/50) to afford 2-(2-choro-4-nitropheny)-2 H-. 1,2,3- triazoe. M/z = 225-227 [M+H]+, Rt = 095 mm (UPLC Method 83).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 288-36-8.

Reference:
Patent; NOVARTIS AG; PISSOT SOLDERMANN, Carole; QUANCARD, Jean; SCHLAPBACH, Achim; SIMIC, Oliver; TINTELNOT-BLOMLEY, Marina; ZOLLER, Thomas; (161 pag.)WO2015/181747; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some scientific research about 930-33-6

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,4-Triazol-3(2H)-one.

Related Products of 930-33-6, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 930-33-6, name is 1H-1,2,4-Triazol-3(2H)-one, molecular formula is C2H3N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

10118] 509 g (28.28 mol) of water are added with stirring to the solution of OTA obtained (in 98% sulfuric acid), followed by 213 g (3.38 mol) of concentrated nitric acid (98% by weight commercial nitric acid).10119] After introduction of the nitric acid, the medium is brought to 65 C. and left stirring at this temperature for 2 hours.10120] Samples are withdrawn in order to monitor the progression of the nitration (once the temperature of the reaction medium has reached 65 C.). Said samples are analyzed after external calibration (using a commercial ONTA). The results are shown in FIG. 4. It is seen that a very high yield can be obtained.10121] The following procedure was carried out for the recovery of the ONTA prepared.10122] The reaction medium is cooled to 10 C. (at expiration of the 2 hours). An amount of 293 g (16.28 mol) of water is then added while maintaining the temperature at 10C. The crystallized ONTA is then filtered off and then pulled dry on a Buechner filter.10123] The weight of wet ONTA recovered is 403 g.10124] The HPLC analysis (of the ONTA recovered) makes it possible to establish, afier external calibration (with commercial ONTA), a yield of 96% ofwet product (Ito the starting ATA).10125] The nature ofthe product obtained (ONTA) was also confirmed by ?3C NMR.j0126] ?3C NMR (DMSO, 100 MHz): 8 158.22 ppm (s), 13924 ppm (s).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,4-Triazol-3(2H)-one.

Reference:
Patent; HERAKLES; EURENCO; HERVE, Gregoire; JACOB, Guy; CAGNON, Guy; BOUCHEZ, Jean-Marc; (9 pag.)US2016/46588; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some scientific research about 7170-01-6

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 3-Methyl-1H-1,2,4-triazole.

Related Products of 7170-01-6, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 2,4-difluorobenzonitrile (7.07 g, 50.8 mmol) and 3-methyl-1H-1,2,4-triazole (4.22 g, 50.8 mmol) in N,N-dimethylformamide (45 ml) was treated with powdered anhydrous potassium carbonate (10 g) and the resulting mixture stirred at 22 C. for 18 h. The solid was then filtered and the filtrate concentrated in vacuo. The residue was diluted with ethyl acetate, washed with water and brine, then dried over anhydrous magnesium sulfate and concentrated. The resulting mixture was purified by a combination of chromatography on silica gel (elution gradient of ethyl acetate in hexane) and reversed phase silica gel to yield intermediates 45-48. 4Fluoro-2-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 117-118 C. 1HNMR 400 MHz (CDCl3) delta ppm: 2.54 (3H, s, CH3), 7.24 (1H, m, CH), 7.62 (1H, dd, J=2.5 Hz and J=9.1 Hz, CH), 7.84 (1H, dd, J=5.6 Hz and J=8.6 Hz, CH), 8.82 (1H, s, CH). Anal. Calcd for C10H7FN4: C 59.40, H 3.49, N 27.71; Found: C 59.25, H 3.32, N 27.81. 4-Fluoro-2-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 120-121 C. 1HNMR400 MHz (CDCl3) delta ppm: 2.56 (3H, s, CH3), 7.30 (1H, dd, J=2.5 Hz and J=8.1 Hz, CH), 7.39 (1H, m, CH), 7.91 (1H, dd, J=5.5 Hz and J=8.6 Hz, CH), 8.06 (1H, s, CH). Anal. Calcd for C10H7FN4: C 59.40, H 3.49, N 27.71; Found: C 59.35, H 3.70, N 27.77. 2-Fluoro-4-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 133-134 C. 1HNMR 400 MHz (CDCl3) delta ppm: 2.52 (3H, s, CH3), 7.61 (1H, dd, J=2 Hz and J=9.1 Hz, CH), 7.67 (1H, dd, J=2 Hz and J=9.6 Hz, CH), 7.79 (1H, dd, J=6.5 Hz and J=8.6 Hz, CH), 8.56 (1H, s, CH). Anal. Calcd for C10H7FN4: C 59.40, H 3.49, N 27.71; Found: C 59.42, H 3.24, N 28.41. 2-Fluoro-4-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 89-90 C., 1HNMR 400 MHz (CDCl3) delta ppm: 2.69 (3H, s, CH3), 7.49-7.55 (2H, m, 2 x CH), 7.83 (1H, dd, J=6.8 Hz and J=8.8 Hz, CH), 8.00 (1H, s, CH). Anal. Calcd for C10H7FN4: C 59.40, H 3.49, N 27.71; Found: C 59.17, H 3.22, N 28.01.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 3-Methyl-1H-1,2,4-triazole.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/111984; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The Shocking Revelation of 41253-21-8

This is the end of this tutorial post, and I hope it has helped your research about 41253-21-8!

Related Products of 41253-21-8, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To 1.5 kg of crude alpha,alpha,alpha’,alpha’-tetramethyl-5-bromomethyl-1,3-benzene-diacetonitrile 5 (purity >80%, about 3 mol) in 7.5 l_DMF 0.275 kg 1,2,4-triazole sodium (3 mol) were added. The mixture was stirred at room temperature for 1 hr. After completion, 10 l ethyl acetate and 25 l water were added. The mixture was stirred for about 10 minutes and then phase separated. To the aqueous layer 5 l ethyl acetate were added. The mixture was stirred for about 10 minutes and then phase separated. The aqueous layer was discarded, and the organic layers were combined. The combined organic layers were washed with 10 l water twice. The organic layer was concentrated to dryness to obtain the crude anastrozole 6 (90%, purity>60%). The crude product was purified by flash column chromatography (silica) using ethyl acetate as eluent (purity>98%). Finally, the pre-purified anastrozole was re-crystallised from ethyl acetate/cyclohexane (1:2) to obtain 6 with a purity of more than 99.9%. Yield 34%.

This is the end of this tutorial post, and I hope it has helped your research about 41253-21-8!

Reference:
Patent; HELM AG; US2006/217569; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Never Underestimate The Influence Of 4H-1,2,4-Triazol-4-amine

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 4H-1,2,4-Triazol-4-amine help many people in the next few years.

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 584-13-4, name is 4H-1,2,4-Triazol-4-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 584-13-4

Example-2 4-Amino-1-[3,5-bis-(1-cyano-1-methylethyl)benzyl]-1H-[1,2,4]triazolium bromide (8) (Q. A.-Salt) Isopropanol (1.5 L), 3,5-bis-(1-cyano-1-methylethyl)benzylbromide (2) (100 g) and 4-amino-1,2,4-triazole (22.5 g) were charged in a flask at room temperature. The reaction mass was heated at 80-85 C. for next 5 hours. The reaction mass was further cooled down to room temperature and stirred for next one hour at 25-35 C. The precipitated solid QA-salt was filtered and washed with fresh isopropanol (100 mL*2). The Q.A.-salt was dried at 60-70 C. till LOD is less than 1.0%, giving solid product (74.4 g). m.p.: 198-200 C.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 4H-1,2,4-Triazol-4-amine help many people in the next few years.

Reference:
Patent; Solanki, Kirtipalsinh Saijansinh; Pal, Gautam; Haider, Hussain; Singh, Manoj Kumar; Kothari, Jay Shantilal; Agarwal, Virendra Kumar; US2009/221837; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A new synthetic route of 1H-1,2,3-Triazole

We very much hope you enjoy reading the articles and that you will join us to present your own research about 288-36-8, Happy reading!

Synthetic Route of 288-36-8, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

In a dry Schlenk Tube at RT under nitrogen are successively charged 2-fluoro-6-iodo-3- methyl-benzoic acid (1.786 mmol, 1 eq), Cul (0.089 mmol, 0.05 eq), 1 H-1 ,2,3-triazole (3.571 mmol, 2 eq), Cs2C03 (3.571 mmol, 2 eq) and DMF (2.5 mL). The resulting blue suspension is stirred at 80C overnight. The obtained reaction mixture is taken up in 1 M aq. HCI and extracted twice with EtOAc. The combined organic layers are dried over Na2S04, filtered and concentrated under reduced pressure. Purification is achieved by preparative HPLC (conditions D) to give the titled compound (246 mg) as a pale yellow solid. LC-MS (conditions A): tR = 0.55 min, [M + 1 ]+ = 222.19.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 288-36-8, Happy reading!

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; BOSS, Christoph; BROTSCHI, Christine; HEIDMANN, Bibia; SIFFERLEN, Thierry; WILLIAMS, Jodi T.; WO2012/85857; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics