Tag: M.W=0-100

Reference of 16681-65-5, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of 1-methyl-1 H-1 ,2,3-triazole (Preparation 32, 0.1 g, 1.2 mmol) in tetrahydrofuran (THF, 10 ml) at -780C was added dropwise 1.6 M n-butyl lithium (0.9 ml, 1.4 mmol), maintaining the temperature below -6O0C. The reaction was stirred at – 780C for 30 minutes, then dimethylformamide (0.14 ml, 1.8 mmol) was added. The reaction was warmed to room temperature and stirred for 1 hour. The reaction was quenched with water and extracted with ethyl acetate (3 x 10 ml). The combined organic extracts were washed with water (3 x 10 ml), dried over MgSO4 and concentrated in vacuo. The residue was purified by silica gel column chromatography, eluting with 95:5 to 100:0 dichloromethane:methanol, to afford the title compound as a yellow oil (0.04 g, 30% yield).1HNMR (CDCI3): 4.10 (s, 3H)1 7.88 (s, 1 H), 9.55 (s, 1 H)

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1-Methyl-1H-1,2,3-triazole.

Reference:
Patent; PFIZER LIMITED; WO2008/135826; (2008); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 7170-01-6

Synthesis of 1-fluoro-2-methoxy-4-nitrobenzene (1023) To a stirred solution of 1-fluoro-2-methoxy-4-nitrobenzene (2.5 g, 14.60 mmol) in DMF (25 mL) under an argon atmosphere were added potassium carbonate (4 g, 29.20 mmol) and 3-methyl-1H-1,2,4-triazole (1.2 g, 14.60 mmol) at room temperature. The reaction mixture was stirred at 85 C. for 16 h in a sealed tube. After consumption of the starting material (monitored by TLC), the reaction mixture was diluted with water (100 mL) and extracted with EtOAc (2×50 mL). The combined organic extracts were dried over sodium sulfate, filtered and concentrated in vacuo. The crude material was purified by column chromatography using 15-25% EtOAc:hexane to afford 1-fluoro-2-methoxy-4-nitrobenzene (1.2 g, 35%) as an off-white solid. 1H-NMR (CDCl3, 400 MHz): delta 8.87 (s, 1H), 8.10 (d, 1H), 8.00-7.97 (m, 2H), 4.10 (s, 3H), 2.50 (s, 3H); LCMS: 234.9 (M+1); (column; Ascentis Express C-18 (50×3.0 mm, 2.7 mum); RT 2.02 min. 0.025% Aq TFA+5% ACN: ACN+5% 0.025% Aq TFA; 1.2 mL/min); TLC: 30% EtOAc:hexane (Rf: 0.2).

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 7170-01-6, and we look forward to future research findings.

Reference:
Patent; FORUM Pharmaceuticals Inc.; Burnett, Duane A.; Bursavich, Matthew Gregory; McRiner, Andrew J.; (484 pag.)US2017/44182; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 3-Methyl-1H-1,2,4-triazole

resultant compoundH N_is in turn reacted with three (3) equivalents of N in 4-Me-2-pentanol to produce

If you are hungry for even more, make sure to check my other article about 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; TRIPP, Jonathan Clive; FANFAIR, Dayne Dustan; SCHULTZ, Mitchell J.; MURUGESAN, Saravanababu; FOX, Richard J.; CHEN, Chung-Pin H.; IVY, Sabrina E.; PAYACK, Joseph Francis; DOUBLEDAY, Wendel W.; WO2012/106189; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 61-82-5

A mixture of aldehyde (1 mmol), dimedone (1 mmol), 3-amino-1,2,4-triazole (1 mmol), and [C4(H-DABCO)2][HSO4]4 (16 mg) washeated in an oil bath (90 C) under solvent-free conditions. Aftercompletion of the reaction, as identified by TLC, using n-hexane:EtOAc (7:3) as the eluent, 10 mL of water was added and stirredfor 10 min. The catalyst was dissolved in water and the solid wasfiltered off and washed with warm EtOH, to obtain the pure targetmolecule.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 61-82-5, and we look forward to future research findings.

Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a 100 ml round bottom flask containing 2-chloro-6-methylnicotinic acid (3 g, 17.4 mmol), copper iodide (0.16 g, 0.5 mol%), and cesium carbonate (1 1 .4 g, 35 mmol) was added a mixture of dioxane (20 ml_) and H2O (0.1 ml, 5.25 mmol). Next triazole (2.03 ml_, 35 mmol) and finally (R,R)-(-)-N,N’-dimethyl-1 ,2- cyclohexanediamine ligand (0.56 ml_, 3.5 mmol) were added. The resulting clumpy yellow slurry was stirred until evenly dispersed. Upon heating to 100C the reaction mixture changed from a yellow slurry to pale green. As heating progressed the slurry became less thick and was stirred more easily. The light green slurry was stirred for 4 hr at 100C and left to stir at room temp overnight. At this point the reaction mixture appeared as a cobalt blue slurry which was then diluted with 20 ml_ ether and 20 ml_ H2O. The resulting solution was thoroughly stirred and transferred to a seperatory funnel then the RBF was subsequently rinsed with 20 ml_ ether and H2O each. The aqueous layer was separated from the organic layer and acidified to pH 1 with 6 ml_ cone. HCI. The now brown/ lime green aqueous layer was extracted twice with EtOAc. The bright yellow organic layers were combined and dried with Na2SO and then cone, into a yellow powder under reduced pressure. To the yellow powder was added EtOAc to form a yellow slurry. The solids were filtered off and washed with EtOAc to give a very pale yellow powder, which was found by 1H NMR to be Intermediate 53 (25% yield). The filtrate was cone, into a yellow solid and purified by FCC using 0-5% MeOH in DCM w/ 0.5% AcOH to give the title compound in a 20% yield. MS (ESI): mass calculated for C9H8N4O2, 204.18; m/z found 205.3 [M+H]+. 1 H NMR (400 MHz, CD3OD): 8.21 – 8.18 (m, 1 H), 7.98 (s, 2H), 7.51 (d, J = 7.9 Hz, 1 H), 2.64 (s, 3H).; Intermediate 51 : 6-Methyl-2-[1 ,2,3]triazol-1 -yl-nicotinic acidThe title compound was isolated from the procedure used to prepareIntermediate 47 with a 25% yield. MS (ESI): mass calculated for Omicron9Eta8Nu4Omicron2, 204.18; m/z found 205.3 [M+H]+ 1H NMR (400 MHz, CD3OD): 8.48 (d, J = 1 Hz, 1 H), 8.25 (dd, J = 7.9, 3.8 Hz, 1 H), 7.88 (d, J = 1 .1 Hz, 1 H), 7.54 (d, J = Hz, 1 H), 2.64 (s, 3H).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1H-1,2,3-Triazole is helpful to your research.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; BRANSTETTER, Bryan, James; LETAVIC, Michael, A.; LY, Kiev, S.; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; WO2011/50200; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C3H5N3

E) tert-butyl 6-methyl-5-(3-methyl-1H-1,2,4-triazol-1-yl)pyrazolo[1,5-a]pyrimidine-3-carboxylate To a solution of tert-butyl 5-chloro-6-methylpyrazolo[1,5-a]pyrimidine-3-carboxylate (1.08 g) in N,N-dimethylformamide (20.2 mL) were added 3-methyl-1H-1,2,4-triazole (469 mg) and potassium carbonate (781 mg) at room temperature. The reaction mixture was stirred at room temperature under an atmosphere dried with calcium chloride, and stirred overnight and then at 60 C. for 2 hr. The reaction mixture was cooled to room temperature, and water was added. The resulting solid was collected by filtration, washed with water, and dried under reduced pressure to give the title compound (870 mg) containing a regioisomer. MS (API+): [M+H]+315.2.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 3-Methyl-1H-1,2,4-triazole ,and how the biochemistry of the body works.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; Kawasaki, Masanori; Mikami, Satoshi; Nakamura, Shinji; Negoro, Nobuyuki; Ikeda, Shuhei; Nomura, Izumi; Ashizawa, Tomoko; Imaeda, Toshihiro; Seto, Masaki; Sasaki, Shigekazu; Marui, Shogo; Taniguchi, Takahiko; (130 pag.)US2016/159808; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7170-01-6

Intermediate 585-(3-Methyl-1 H-1 , -thazol-1 -yl)pyrazine-2-carboxylic acidA mixture of methyl 5-chloropyrazine-2-carboxylate (0.75 g), K2CO3 (1 .8 g) and 3- methyl-1 H-1 ,2,4-triazole(1 .2 g) in N,N-dimethylformamide (6 mL) is heated to 100C overnight. Analysis of the crude mixture by LCMS shows saponified product. The product is acidified with 1 N HCI and the precipitate is filtered and washed with water and diethyl ether to afford the title compound. LC (method 20): tR = 1 .21 min; Mass spectrum (APCI): m/z = 206 [M+H]+.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3-Methyl-1H-1,2,4-triazole, in my other articles.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; NEUROCRINE BIOSCIENCES, INC.; HECKEL, Armin; HIMMELSBACH, Frank; LANGKOPF, Elke; NOSSE, Bernd; ASHWEEK, Neil, J.; HARRIOTT, Nicole; WO2012/168315; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 61-82-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 61-82-5, name is 1H-1,2,4-Triazol-5-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a mixture of dimedone (1 mmol), aldehyde (1 mmol), 2-aminobenzimidazole or 3-amino-1,2,4-triazole (1 mmol)and nano-SiO2 (15 mol %) in the acetonitrile (5 mL) was stirred for appropriate time (Table 2) at 25-30 C. After the completion of the reaction as indicated by TLC, dichloromethane (CH2Cl2) was added to the solidified mixture and the insoluble catalyst was separated by filtration. Evaporation of the solvent from the filtrate and recrystallization of the solid residue from hot ethanol afforded the pure products in high yields.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 61-82-5.

Reference:
Article; Mousavi, Mir Rasul; Maghsoodlou, Malek Taher; Journal of the Iranian Chemical Society; vol. 12; 5; (2015); p. 743 – 749;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 41253-21-8, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Ethyl chloroformate (13g) was slowly added dropwise to the solvent of triazole sodium salt (9.1g) in tetrahydrofuran (30mL) at 20-30 C, and the reaction was completed at 20-30 C for 1h. After the reaction is completed, filter to obtain a solution of ethyl 1,2,4-triazole-1-carboxylate in tetrahydrofuran; from -40 to -30, slowly add a solution of ethyl 1,2,4-triazole-1-carboxylate in tetrahydrofuran. A solution of LDA (lithium diisopropylamide) in tetrahydrofuran (2M, 60mL) was added dropwise. After reaction for 30min, ethyl chloroformate (13g) was added dropwise. After stirring for 30min, the temperature was slowly raised to 20-30 C and stirred for 2h; After completion, add 30% aqueous sodium hydroxide solution to the system and react at 80 90 for 2h. After completion of the reaction, cool to 0 10 , add hydrochloric acid to adjust pH 2 3, and filter to obtain 1, 2, 4-triazole -3-carboxylic acid, yield 82%.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 41253-21-8, Happy reading!

Reference:
Patent; Shanghai Dongyue Pharmaceutical Co., Ltd.; An Na; Liu Xinke; Long Zhongzhu; Cai Chang; Cai Shuihong; (5 pag.)CN110903255; (2020); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 584-13-4, name is 4H-1,2,4-Triazol-4-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 4H-1,2,4-Triazol-4-amine, in my other articles.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics