Tag: M.W=0-100

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 61-82-5

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

If you are hungry for even more, make sure to check my other article about 61-82-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-65-5, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 1-methyl-1H-1,2,3-triazole (12.9 g, 155 mmol) in THF (260 mL) was cooled to -45 C. Maintaining a temperature of <-35 C., nBuLi (62.1 mL, 2.5 M in hexanes, 155 mmol) was added over 10 min. The reaction mixture was stirred for 30 min with cooling to -45 C. and then treated with a sub-surface stream of CO2(g) for a period of 2 h. After flushing the -35 C. slurry with N2(g) for 5 min, thionyl chloride (11.8 mL, 163 mmol) was added. The mixture was allowed to warm to room temperature with stirring over 1.25 h. Addition of N,O-dimethylhydroxylamine hydrochloride (18.14 g, 186 mmol) and N,N-diisopropylethylamine (68.3 mL, 396 mmol) was followed by stirring for 15 h. Aqueous sodium carbonate (500 mL, 10 wt %) was then added, and the layers were mixed and separated. The aqueous layer was washed with dichloromethane (250 mL and then 125 mL), and the combined organic layers were dried over MgSO4, filtered, and concentrated. The concentrate was taken up in ethyl acetate (225 mL), treated with MgSO4, and filtered through a pad of silica gel (115 g). The silica gel pad was washed with additional ethyl acetate (800 mL). The eluent was concentrated to provide the title compound as a yellow solid. Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 16681-65-5. Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1H-1,2,4-Triazole

Example 2 Synthesis of 2-((1H-1,2,4-triazol-1-yl)methyl)-2-(2,4-difluorophenyl)-1,3-dioxolane-4-thiol Sodium triazole was prepared in-situ by azeotropically distilling a mixture of 1,2,4-triazole (0.5 mol), sodium hydroxide solution (50%, 35.2 mL), toluene, (250 mL) and dimethylsulfoxide (250 mL) to a Karl Fisher water content less than 0.4% (by a Karl Fisher titration). The solution was cooled to 25 C., then a anhydrous toluene solution of 2-(bromomethyl)-2-(2,4-difluorophenyl)-4-(ethylthio)-1,3-dioxolane (Chemical Structure 8, 1.8 mol) was added. The temperature was increased to 75 C. and held at that temperature to reaction completion (monitored by TLC). Then the reaction mixture was cooled to 35 C. and quenched with dilute sodium hydroxide aqueous solution slowly to keep the temperature below 45 C. After the resulting mixture was cooled to 25 to 35 C., water and toluene were added. After the phases were separated, the aqueous phase was washed with toluene 3 to 5 times. The combined organic phases were concentrated under a maximum temperature of 70 C. The ethyl group of the thioester (1 mol) was removed by treated the resulting residue with sodium methoxide (approximately 8 mol) in dimtheylformamide (300 mL). The reaction mixture was stirred under nitrogen over night at 120 C. After cooling to room temperature, the reaction was quenched by adding methyl iodide (5 mol) under constantly stirring. Then the mixture was poured into water (350 mL) and extracted with tert-butyl methyl ether (100 mL*3). The organic phase was washed with saturated sodium sulphate solution and condensed. The residue was dissolved in warm toluene and washed with dilute hydrochloric acid aqueous solution, up to two times. After filtration of the precipitate and crystallization from isopropanol/Isopropyl ether (8/2, v/v), the D form of Chemical Structure A where X is -SH was obtained in ~65% yield (Chemical Structure 9).

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-1,2,4-Triazole ,and how the biochemistry of the body works.

Reference:
Patent; Wu, Nian; Keller, Brian Charles; US2010/143455; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1H-1,2,3-Triazole

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1 ,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dirnethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to rt, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 50% EtOAc in water with 0.1% TFA) to give the desired A-3. A portion of this acid (0.1 1 g, 0.53 mmol) was treated with thionyl chloride (0.59 g, 5.3 mmol) in dichloromethane (5.0 mL) at rt. After stirring at RT for 1 h, the mixture was concentrated, azeotroping with benzene to yield acid chloride A-3.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,3-Triazole, in my other articles.

Reference:
Patent; MERCK & CO., INC.; WO2009/11775; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-65-5, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of n-BuLi (2.5 M in hexanes, 1.25 mL, 3.12 mmol) was added dropwise by syringe to a solution of 1-methyl-1H-1,2,3-triazole (268 mg, 3.22 mmol) in dry THF (32 mL) in a dry ice-methanol bath. The suspension was stirred for 30 minutes, slowly allowing the reaction mixture to warm to -10 C. (4-Chloro-2-methoxy-3-((6-(trifluoromethyl)pyridin-3-yl)methyl)quinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (0.500 g, 1.05 mmol, Intermediate 45: step f) in dry THF (5 mL) was added to the mixture via syringe and the resulting mixture was allowed to warm to ambient temperature overnight. The reaction was quenched with water. Brine was added and the aqueous mixture was extracted with ethyl acetate. The combined organic layers were dried (Na2SO4), filtered, and concentrated. The crude product was purified by flash column chromatography (silica gel, 0-8% MeOH-DCM) to provide the title compound. 1H NMR (500 MHz, CDCl3) delta 8.69 (d, J=1.7 Hz, 1H), 8.24 (d, J=1.9 Hz, 1H), 8.22 (s, 1H), 7.79-7.76 (m, 1H), 7.75 (d, J=8.7 Hz, 1H), 7.57 (d, J=8.1 Hz, 1H), 7.42 (dd, J=8.7, 2.0 Hz, 1H), 6.97 (s, 1H), 5.95 (s, 1H), 4.30 (s, 2H), 4.08 (s, 3H), 3.88 (s, 3H), 3.33 (s, 3H), 2.12 (s, 3H); MS m/e 557.8 [M+H]+.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1-Methyl-1H-1,2,3-triazole.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; Jones, William Moore; Goldberg, Steven; US2015/105366; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C2H2N3Na

10.0 g of the compound of formula (FF) as oil, as obtained according to Reference Example 1.1.e, were dissolved in 80 ml of DMSO under stirring. Then, 10 g of the sodium salt of 1,2,4-triazole were added at 25 to 30 C., and the resulting reaction mixture was stirred for 24 hours at 85 to 90 C. The mixture was then cooled to 25 to 30 C., and 25 ml of 5% (w/v) aqueous solution of sodium hydroxide were added. The mixture was then stirred for 3 hours at 25 to 30 C. 100 ml of water were added, and the product was extracted into 150 ml of methyl tetrahydrofuran. The thus obtained organic layer was washed with a 10% (w/v) aqueous solution of sodium chloride, and subsequently the solvents of the resulting separated organic layer were removed by distillation under reduced pressure to obtain the title compound of formula (GG) as a crude oil. The yield was 6.0 g, corresponding to a theoretical value of 86.0%.

If you are hungry for even more, make sure to check my other article about 41253-21-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SANDOZ AG; Wilhelm, Thorsten; Langner, Martin; US2014/303184; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-88-0, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Weigh 0.691 g (10 mmol) of 1,2,4-triazole,Para-fluorobenzaldehyde 1.240 g (10 mmol) and anhydrous potassium carbonate 2.760 g (20 mmol) were weighed out,Was dissolved in 25 mL of N, N-dimethylformamide,Add to a thermometer,In a 50 mL four-necked flask equipped with a stirrer,80 under the reaction after 10h stop heating,Filtered to remove potassium carbonate,Ethyl acetate extraction,After the solvent was removed by rotary evaporation,An off-white solid,Recrystallized three times with ethanol,Get pure,Drying at 50 C in vacuo for 6h gave 4- (1-1,2,4-triazolyl) benzaldehyde.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,4-Triazole, hurry up and to see.

Reference:
Patent; Qilu University of Technology; Duan Hongdong; Xu Ting; Bu Juan; (13 pag.)CN107056716; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1H-1,2,4-Triazol-5-amine

General procedure: A mixture of aromaticaldehyde (1.0 mmol) and dimedone(1.0 mmol) with 2-aminobenzimidazole or 3-amino-1,2,4-triazole (1.0 mmol) was stirred in acetic acid (5 mL) at 60 Cfor the appropriate time (Tables 3, 4). The progress of thereaction was monitored by TLC. After completion of thereaction, a thick precipitate was obtained. The solid productwas filtered off and washed with acetic acid (3 × 2 mL) togive the pure products 4 and 6, and subsequently dried in air.The pure products were characterized by conventional spectroscopicmethods. Physical and spectral data for the compounds,4b, 4c, 4h, 4j, 6a, 6c, and 6h are represented below:

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazol-5-amine, in my other articles.

Reference:
Article; Mousavi, Mir Rasul; Maghsoodlou, Malek Taher; Hazeri, Nourallah; Habibi-Khorassani, Sayyed Mostafa; Journal of the Iranian Chemical Society; vol. 12; 8; (2015); p. 1419 – 1424;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 27808-16-8, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 4-methyl-iH-i,2,3-triazole (500 mg,6.02 mmol), 2,3-dichloro-5-nitropyridine (1277.42 mg, 6.62 mmol), K2C03 (2491.22 mg, 18.05 mmol) in CH3CN (5 mE) was stirred at it for 12 h. The mixture was concentrated under reduced pressure, the crude product was purified by colunm chromatography over silica gel (petroleum ether ethyl acetate from 20:1 to 1:1). The desired fractions were collected and the solvent was concentrated under reduced pressure to afford i25a (1.1 g, 76.3%) as a yellow solid. ECMS (ESI) mlz M+i: 239.7. Zn (1491.96 mg, 22.95 mmol) was added to a solution of mixture of 3-chloro-2-(4-methyl-2H-i,2,3-tri- azol-2-yl)-5-nitropyridine and 3-chloro-2-(4-methyl-i H-i, 2,3-triazol-i-yl)-5-nitropyridine, i25a (1.1 g, 2.30 mmol) in aqNH4C1 (30 mE) and H20 (30 mE). The mixture was stirred at it for 16 h. To the suspension was added aq NaHCO3 to adjust to pH 9-10, and the mixture was filtered through a pad of diatomaceous earth. The filter cake was washed with CH2C12 (100 mEx3). The combined filtrates were washed with brine (200 mE), dried over MgSO4 and concentrated under reduced pressure to afford mixture of 5-chloro-6-(4-methyl-2H- 1 ,2,3-triazol-2-yl)pyridin-3-amine and 5-chloro-6-(4-methyl-i H-i ,2,3-triazol- 1 -yl)pyriF din-3-amine, 125b (1 g) as a brown solid, used directly for the next step. LCMS (ESI) mlz M+H: 209.7

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 27808-16-8.

Reference:
Patent; Janssen Biotech, Inc.; Lu, Tianbao; Allison, Brett Douglas; Barbay, Joseph Kent; Connolly, Peter J.; Cummings, Maxwell David; Diels, Gaston; Edwards, James Patrick; Kreutter, Kevin D.; Philippar, Ulrike; Shen, Fang; Thuring, Johannes Wilhelmus John Fitzgerald; Wu, Tongfei; (412 pag.)US2018/170909; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 3,5-Diamino-1,2,4-triazole

To a solution of compound 8 (5.71 mmol) in 10 mL of glacial acetic acid, was added diaminotriazole 10 (8.56 mmol) and heated to reflux for 4 h. The reaction mixture was cooled, and the solvent evaporated in vacuo to produce a pale-yellow solid. The solid was washed with water and recrystallized from ethanol to furnish the title compound as white crystals. (adapted from 1). Yield 72percent (0.87 g). 1H NMR (600 MHz, DMSO-d6) delta 8.53 (d, J = 4.8 Hz, 1H), 8.21 ? 8.10 (m, 2H), 7.63 ? 7.57 (m, 3H), 7.25 (d, J = 4.8 Hz, 1H), 6.45 (s, 2H). HRMS-ESI (+) m/z calculated for C11H10N5, 212.0936 [M+H]+; found: 212.0939.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3,5-Diamino-1,2,4-triazole, in my other articles.

Reference:
Article; Ribeiro, Carlos J.A.; Kankanala, Jayakanth; Xie, Jiashu; Williams, Jessica; Aihara, Hideki; Wang, Zhengqiang; Bioorganic and Medicinal Chemistry Letters; vol. 29; 2; (2019); p. 257 – 261;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics