Tag: M.W=0-100

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2H3N3

To a stirred solution of compound 54 (5.00 g, 74.55 mmol) in DCM (100 mL) was added 3,4-dihydro-2H-pyran (6.90 g, 82.00 mmol) and p-Toluenesulfonic acid (0.62 g, 3.62 mmol), the mixture was stirred at rt for 16 h, TLC showed that the start materials was consumed up, stopped the reaction, concentrated in vacuo, the residue was purified by column (EtO Ac/Hex 1/10 to 1/6) to give compound 55 (9.00 g, 81% yield) as a colorless oil. MS (ESI) (M/Z): [M+H]+ =154.1; 1H NMR (400 MHz, CDC13) delta 7.67 (s, 2H), 5.73 (dd, 7 = 9.1, 2.7 Hz, 1H), 4.03 (ddd, 7 = 11.7, 3.7, 2.4 Hz, 1H), 3.79 – 3.69 (m, 1H), 2.48 – 2.38 (m, 1H), 2.16 – 2.04 (m, 2H), 1.77 – 1.69 (m, 2H), 1.67 – 1.61 (m, 1H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,3-Triazole, in my other articles.

Reference:
Patent; ZHANG, Hai-Jun; (63 pag.)WO2018/217439; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 288-36-8

Intermediate 21: 2-Fluoro-6-(2H-l,2,3-triazol-2-yl)benzoic acid To a solution of 2H-l,2,3-triazole (5.0 g, 72.46 mmol ) in DMF (20 ml) was added cesium carbonate (23.55 g, 72.46 mmol), N,N-dimethylethylenediamine (1.02 g, 7.24 mmol), copper(I) iodide (0.34 g, 1.811 mmol) and 2-fluoro-6-iodobenzoic acid (9.63 g, 36.23 mmol ) at 0-10 C. The reaction was stirred at 125C for 15 min in the microwave and then poured into water (100 ml) and extracted with ethyl acetate (100 ml x 3). The aqueous layer was acidified with dilute HC1 to pH 2 and extracted with ethyl acetate (100 ml x 3). The combined organic layer was washed with brine, dried over sodium sulphate and concentrated in vacuo. This was then purified by column chromatography (0-3% methanol / dichloromethane) to afford the title compound.1H NMR (400 MHz DMSO- d6): delta ppm 7.43-7.47 (m, 1H), 7.66-7.72 (m, 1H), 7.78-7.80 (m, 1H), 8.13 (s, 2H), 13.71 (s, 1H)MS ES+: 208

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,3-Triazole, in my other articles.

Reference:
Patent; TAKEDA CAMBRIDGE LIMITED; TAKEDA PHARMACEUTICAL COMPANY LIMITED; FIELDHOUSE, Charlotte; GLEN, Angela; ROBINSON, John Stephen; FUJIMOTO, Tatsuhiko; WO2015/55994; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 41253-21-8, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Intermediate 38: 4-Cyclohexyl-4- [ (1, 2, 4-triazol-1-yl) methyl] piperidine Step A: 1-BOC-4-Cyclohexyl-4- [ (1, 2, 4-triazol-1-yl) methyl] piperidine To a solution of 1-BOC-4-cyclohexyl-4- [ (methanesulfonyloxy) methyl] piperidine (375 mg, 1 mmol) in DMF (10 mL) was added Na-1, 2,4-triazole (273 mg, 3 mmol), and the solution was stirred at 90-100C for 12 h. After DMF was distilled off in vacuo, the reaction mixture was quenched wirh a saturated aqueous NH4C1 solution, and the organic material was extracted with EtOAc. The extracts were dried over MgS04, filtered, and concentrated in vacuo. The residue was purified by column chromatography (eluent : acetone/DCM = 3/1) to give the title compound (313 mg, 90%). MS [M+H] = 349 (M+1)

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about Sodium 1,2,4-triazol-1-ide is helpful to your research.

Reference:
Patent; LG LIFE SCIENCES LTD.; YAMANOUCHI PHARMACEUTICAL CO., LTD.; WO2005/47253; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 3,5-Dimethyl-4H-1,2,4-triazole

Included at room temperature3,5-Dimethyl-1,2,4-triazole 10.5 g (0.108 mol)And dehydrated N,N-dimethylformamide 60mL20.7 g (0.107 mol) of 28percent sodium methoxide methanol solution was added to the solution.After stirring for 20 minutes,21.6 g (0.109 mol) of 3-chloropropyltrimethoxydecane was added.Stir at 90~93 ° C for 4 hours.After cooling the suspension reaction solution to 2 ° C,Filter out insoluble matter,Then,The solvent of the filtrate is distilled off under reduced pressure,And filtering out a small amount of insoluble matter generated,Obtained a brownish liquid 24.6 g (0.095 mol,Yield 87.8percent).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 7343-34-2.

Reference:
Patent; SHIKOKU CHEMICALS CORPORATION; MURAI,, TAKAYUKI; TANIOKA, MIYA; IIDA, SHUSAKU; KATSUMURA, MASATO; YAMAJI, NORIAKI; IMAMINE, TAKAHITO; TSUJINO, MASAHIKO; HIRAO, HIROHIKO; (52 pag.)TW2018/41929; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

3-Methyl-iH-i,2,4-triazole (375 mg, 4.51 mmol) was placed in a flask with dry DMF (5 mL).Sodium hydride (195 mg, 4.89 mmol) was added and the RM was stirred at room temperature for 15 minutes. tert-Butyl 4-((methylsulfonyl)oxy) pi peridi ne-i -carboxylate (Intermediate C, step 1) (i.OOg, 3.S8mmol) was then added and the RM was stirred at 10000 for 4 hours. The resulting mixture was partitioned between EtOAc and water. The organic phase was washed with water and brine, dried over Mg504, filtered and the solvent wasremoved in vacuo. The product was purified by chromatography on silica eluting with isohexane/( EtOAc:MeOH – 10:1) to afford:Product Step 1 a: tert- Butyl 4-(3-methyl- 1 H- 1,2 ,4-triazol- 1 -yl)piperidine- 1 -carboxylate;1H NMR (400 MHz, DMSO-d6) O 8.40 (iH, 5), 4.48 (iH, m), 4.01 (2H, m), 2.90 (2H, m), 2.22(3H, 5), 1.99 (2H, m), 1.72 (2H, m), 1.40 (9H, 5).Product Step 1 b: tert- Butyl 4-(5-methyl- 1 H- 1,2 ,4-triazol- 1 -yl)piperidine- 1 -carboxylate;1H NMR (400 MHz, DMSO-d6) O 7.79 (iH, 5), 4.45 (iH, m), 4.02 (2H, m), 2.90 (2H, m), 2.41 (3H, 5), 1.82 (2H, m), 1.75 (2H, m), 1.41 (9H, 5).

This is the end of this tutorial post, and I hope it has helped your research about 7170-01-6!

Reference:
Patent; NOVARTIS AG; BEATTIE, David; BAETTIG, Urs; LEGRAND, Darren Mark; LISTER, Andrew Stuart; MCKENNA, Jeffrey; PEARCE, David William; SANDHAM, David Andrew; STEWARD, Oliver Ross; THOMSON, Christopher; WO2015/8230; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 41253-21-8, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

EXAMPLE 30 Preparation of bis(4-Fluorophenyl)methyl(1H,-1,2,4-triazol-1-ylmethyl)silane and its hydrochloride salt A mixture of 4.2 g (0.015 mol) of (chloromethyl)bis(4-fluorophenyl)methylsilane and 1.4 g (0.015 mol) of 1,2,4-triazole sodium salt in 8 ml of dimethylformamide was stirred at 80 for 2 hours. The resulting slurry was cooled, diluted with water, and washed with ether. The ether extracts were washed with several portion of water and once with brine, dried over magnesium sulfate, and evaporated to leave 4.0 g of a pale yellow oil. Impurities were removed by Kugelrohr distillation at 120-125 (0.05 mm), leaving behind 2.3 g (49%) of the title compound as a yellow oil: nD21 1.5538; ir (neat) 3065, 3030, 2960, 2925, 1590, 1500, 1270, 1235, 1165, 1110, 1010, 830, 790 cm-1; nmr (CDCl3): 0.7 (3H, s), 4.2 (2H, s), 7.1 (4H, t, J=9), 7.5 (4H, d of d, J=6 and 9), 7.8 (1H, s) and 7.9 (1H, s). A sample prepared similarly was crystallized from hexane at -20 C. to give colorless solid, m.p. 52-53. The hydrochloride salt of the title compound was prepared as follows. A solution of 5.0 g (0.016 mol) of [bis(4-fluorophenyl)]methyl(1H-1,2,4-triazol-1-ylmethyl)silane in 100 ml of toluene was stirred while HCl gas was passed over the solution surface until no further precipitate formed. The colorless solid was collected by filtration, washed with toluene and petroluem ether, and air-dried to give 5.1 g (91%) of the hydrochloride salt, m.p. 195-197. Recrystallization from 100 ml of hot ethanol gave 3.5 g of colorless crystals, m.p. 201-203. Acid salts of the other triazoles of this invention can be prepared similarly. By applying the procedures of Examples 24 and 26-30 to appropriate chloromethylsilanes, the compounds of Table VI can be prepared.

I am very proud of our efforts over the past few months and hope to Sodium 1,2,4-triazol-1-ide help many people in the next few years.

Reference:
Patent; E. I. Du Pont de Nemours and Company; US4510136; (1985); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 288-36-8

Intermediate E: 2-(2H-l,2,3-triazol-2-yl)benzoic acid Int E Step 1 : 2-(2H-l,2,3-triazol-2-yl)benzoic acid (Int E) To a solution of 2-iodobenzoic acid (3.0 g, 12.1 mmol) in DMF was added 1,2,3-triazole (1.5 g, 21.7 mmol), Cs2C03 (7.1 g, 21.7 mmol), Cul (114 mg, 0.6 mmol), and trans-N,N’-dimethylcyclohexane- 1,2-diamine (310 mg, 2.2 mmol). After heating at 120 C for 10 min in a microwave reactor, the mixture was cooled to room temperature, diluted with EtOAc, and filtered through Celite. The filtrate was concentrated in vacuo and the crude residue was purified by silica gel chromatography (MeOH in DCM with 0.1% AcOH) to give Int E as the faster eluting isomer. 1H NMR (DMSO-d6, 500MHz) delta 13.05 (brs, 1 H), 8.12 (s, 2H), 7.81-7.52 (m, 4H).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 288-36-8

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; REGER, Thomas, S.; ROECKER, Anthony, J.; WO2015/95111; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 41253-21-8

(ii) Preparation of crude anastrozole; Into a 1 L, three-necked RB flask was charged 60g of sodium triazole monohydrate (prepared by reaction of molar quantities of 1,2,4-IH-triazole and sodium hydroxide in isopropanol at reflux temperature and isolated by filtering of the reaction mass at room temperature) and 200ml of dry DMF under nitrogen atmosphere. The reaction mass was cooled to 20 C. A solution of the above bromo compound of formula-V (140g) in toluene (200ml) was added to the reaction mass over a period of 2hr. The reaction mass was maintained at this temperature until the completion of reaction. The reaction mass was transferred into 3L flask containing 1.5L of water and stirred for 30min. Reaction mass was extracted with toluene (2 x 300ml and 1 x 100ml). Toluene layers were combined and washed with water (2 x 200ml). Toluene layer was treated with activated carbon (5g) and filtered. Toluene was distilled of from the filtrate under vaccum to get 130g of crude anastrozole.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 41253-21-8, and we look forward to future research findings.

Reference:
Patent; NATCO PHARMA LIMITED; PULLA REDDY, Muddasani; VENKAIAH CHOWDARY, Nannapaneni; WO2005/105762; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-88-0, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Add 1,2,4-triazole (17.44 g, 252.5 mmol),Sodium hydroxide (10.4g, 259.9mmol),2.8 g of triethylbenzyl ammonium chloride and 10 g of N, N-dimethylformamide were put into a reaction flask,After preheating to 80 C,Started the dropwise addition of 2- (4-chlorophenethyl) -2-tert-butylethylene oxide (59.1 g, 247.5 mmol),Control temperature ?95 during dropping,After the addition,Incubate at 98 102 for 2 3h,After the incubation period, add a water layer, wash the organic layer with water to pH <8, and after the organic layer is desolved under negative pressure,74.5 g of finished tebuconazole is obtained,Content 97.8%,The yield was 95.6%. This is the end of this tutorial post, and I hope it has helped your research about 288-88-0! Reference:
Patent; Jiangsu Qi Zhou Green Chemical Co., Ltd.; Chen Jia; Jiang Yuhua; Zhou Wei; Cai Junyi; Ding Fei; (6 pag.)CN110563660; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1455-77-2, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, molecular formula is C2H5N5, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: 2-Naphthalenesulfonyl chloride (60 mmol, 13.5 g) was slowlyadded to a solution containing 5-amino-1,2,4-triazole (60 mmol,5.04 g) (for anstrz synthesis) or 3,5-diamino-1,2,4-triazole (60 mmol,5.95 g) (for danstrz synthesis) and pyridine (60 mmol, rho = 0.978 g/mL,4.85 mL) in 100 mL of acetonitrile (dry) under a N2 atmosphere at55 °C. Then, the temperature reaction was raised to 85 °C and themixture stirred for 16 h. Afterwards, the mixture was brought toroom temperature and later on placed in an ice bath for 1 h. Thesolid was filtered, washed with water and dichloromethane, anddried to constant weight.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3,5-Diamino-1,2,4-triazole.

Reference:
Article; Herna?ndez-Gil, Javier; Ferrer, Sacramento; Cabedo, Nuria; Lo?pez-Gresa, Mari?a Pilar; Castin?eiras, Alfonso; Lloret, Francesc; Journal of Inorganic Biochemistry; vol. 125; (2013); p. 50 – 63;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics