Tag: M.W=0-100

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 1H-1,2,3-Triazole

In a round-bottomed flask equipped with an overhead magnetic stirrer, reflux condenser, and nitrogen inlet were added 5-chloro-2-iodobenzoic acid (1 .15 g, 4.07 mmol), copper iodide (0.04 g, 0.2 mmol), and CS2CO3 (2.65 g, 8.14 mmol). To these solids were added dioxane (6 mL), water (0.05 mL), then 1 H-1 ,2,3-triazole (0.47 mL, 8.14 mmol), and finally trans-1 ,2-dimethylcyclohexane-1 ,2-diamine (0.3 mL, 0.81 mmol). The mixture was then warmed to 100 C for 4 hrs. Then the mixture was cooled and then MTBE and of water were added. After vigorous mixing, the layers were separated and the bottom aqueous layer was acidified to pH 2 with 6N HCI. The aqueous was then extracted twice with EtOAc. The combined organic layers were dried, filtered, and concentrated. The oil was stirred overnight in EtOAc (8 mL) and the resulting precipitate was removed by filtration affording a first crop of wanted product(100 mg). The mother-liquors were concentrated and purified by FC on S1O2 column (eluting from DCM to DCM : MeOH: 90: 10) to afford a second batch of the desired product that was mixed with the former to afford 5-chloro-2-(2H-1 ,2,3-triazol-2- yl)benzoic acid (p120, 620 mg, y=68%). MS (mlz): 223.9 [MH]+

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,3-Triazole, in my other articles.

Reference:
Patent; CHRONOS THERAPEUTICS LIMITED; MICHELI, Fabrizio; BERTANI, Barbara; GIBSON, Karl Richard; DI FABIO, Romano; RAVEGLIA, Luca; ZANALETTI, Riccardo; CREMONESI, Susanna; POZZAN, Alfonso; SEMERARO, Teresa; TARSI, Luca; LUKER, Timothy Jon; (275 pag.)WO2019/43407; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 61-82-5

General procedure: A mixture of aldehyde (1.0 mmol), dimedone (1.0 mmol),1H-1,2,4-triazol-3-amine (1.0 mmol) and nano-AlPO4(SO3H) (0.1 g) was stirred in the acetonitrile (4.0 mL)at 50 C for an appropriate time. After the completion of thereaction as indicated by TLC, dichloromethane was addedto the solidified mixture and the insoluble catalyst was separatedby centrifugation. Evaporation of the solvent from thefiltrate and recrystallization of the solid residue from hot ethanolafforded the pure products in good to excellent yields

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 61-82-5, and we look forward to future research findings.

Reference:
Article; Sharghi, Hashem; Aboonajmi, Jasem; Aberi, Mahdi; Shiri, Pezhman; Journal of the Iranian Chemical Society; vol. 15; 5; (2018); p. 1107 – 1118;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 7170-01-6

The solution of compound 1 (30 g, 0.13 mol) in THF (1.5 L) was cooled to -78 C. Then a solution of vinyl magnesium in THF (508 mL, 1N, 0.51 mol) was added dropwise to the above solution maintained below -40 C. The mixture was stirred for 3 hrs at -78 C before being quenched with saturated aqueous NH4Cl solution. The layers were separated, the aqueous layer was extracted with EtOAc (3×500 mL) and the combined organic layer was washed with brine and concentrated. The crude product was purified by silica gel column chromatography to obtain compound 2 (5 g, 17%). Compound 2 (4.0 g, 17.2 mmol) was dissolved in freshly prepared NaOMe (20 mL). CuI (3.2 g, 17.2 mmol) was added to the above solution. The mixture was stirred at 110 C under microwave for 3 hrs. After the mixture was completed, the mixture was added EtOAc and H2O, then the suspension was filtered, the filtrate was separated. The organic layer was concentrated to give crude product which was purified by column chromatography to give compound 3 (1.8 g, 45%). A mixture of compound 3 (0.7 g, 3.8 mmol) and 3-methyl-1,2,4-triazole (6.4 g, 76.8 mmol) was added copper powder (0.49 g, 7.68 mmol) and KOH (0.43 g, 7.68 mmol). The mixture was heated tomelt at 170-175 C under N2. After the starting material was consumed completely, the mixture was added EtOAc and H2O, then the suspension was filtered, the filtrate was separated. The organic layer was concentrated to give crude product which was purified by column chromatography to give compound 4 (0.23 g, 26%). A solution of compound 4 (0.23 g, 1 mmol) in THF (12 mL) was cooled to -10 C, EtMgBr (0.47 g, 3.5 mmol)was added dropwise at -10 C followed by the addition of pyridine(0.3 mL). The slurry was cooled to -45 C, and the ethyl 2-chloro-2-oxoacetate (0.55 g, 4 mmol) was added dropwise at -45 C. The slurry was allowed to -10 C and stirred at this temperature for 1h. After the reaction was completed, the mixture was quenched with IPA (2mL) and H2O (20 mL). The mixture was extracted with EtOAc, the organic layer was washed with brine and concentrated to give crude product which was purified by column chromatographyto give compound 5 (0.17 g, 52%). A solution of compound 5 (0.17 g, 0.52mmol) in MeOH (5 mL) was added NaOH (0.041 g, 1.03 mmol) and H2O (2mL). The mixture was stirred at 25 C for 6 hrs and then added 1N HCl to adjusted pH 6, the mixture was concentratedto give compound 6 (0.29 g) as crude product.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 7170-01-6.

Reference:
Article; Tuyishime, Marina; Lawrence, Rae; Cocklin, Simon; Bioorganic and Medicinal Chemistry Letters; vol. 26; 1; (2016); p. 228 – 234;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 60166-43-0, name is 1,4-Dimethyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

A solution of 1,4-dimethyltriazole (14.1, 500 mg, 5.15 mmol, 1 equivalent) in THF (2 mL) was added dropwise to a solution of n-BuLi (2.5 M, 2.47 mL, 1.2 equivalent) in THF (15 mL) at -78 C. under nitrogen atmosphere. The resulting cloudy mixture was stirred at -70 C. for 1 h. After this time, tributyl tinchloride (1.84 g, 5.66 mmol, 1.52 mL, 1.1 equivalent) was added; the reaction mixture became clear and was stirred at -70 C. for 30 min, then it was allowed to warm to 20 C. The reaction mixture was poured into saturated NH4Cl solution (10 mL) and extracted with EtOAc (50 mL*3). The combined organic layers were washed with brine (50 mL*2), were dried over sodium sulfate then filtered. The solvent was concentrated under reduced pressure to give tributyl-(3,5-dimethyltriazol-4-yl)stannane (14.2, 2.2 g) as a yellow oil; LCMS [M+1]: 388.2.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 60166-43-0, and we look forward to future research findings.

Reference:
Patent; Mirati Therapeutics, Inc.; Marx, Matthew Arnold; Lee, Matthew Randolph; Galemmo, Robert Anthony; Bobinski, Thomas P.; US2018/265517; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-36-8, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

2H-1,2,3-triazole (3.45 g, 50 mmol),2-iodo-5-methylbenzoic acid (5.24 g, 20 mmol)Cesium carbonate (11.72 g, 36 mmol),Trans-N, N’-dimethyl-1,2-cyclohexanediamine (0.51 g, 3.6 mmol)Cuprous iodide (0.38 g, 2 mmol),N, N-dimethylformamide (30 mL) were successively added to a 100 mL single-necked round bottom flask,Under the protection of nitrogen gradually heated to 100 ,Reaction for 4 hours.Stop the reaction,cool down,Diluted with tap water and extracted with ethyl acetate (200 mL x 2).The aqueous layer was acidified with concentrated hydrochloric acid to pH = 1 to 2 and extracted with ethyl acetate (200 mL x 2)The combined organic layers were combined and dried over anhydrous sodium sulphate,filter,The filtrate was evaporated under reduced pressure and purified by column chromatography (dichloromethane / methanol (v / v) = 50 / 1) to afford the title compound (yellow solid, 2.76 g, 68%).

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 288-36-8.

Reference:
Patent; Guangdong HEC Pharmaceutical Co., Ltd.; Jin, Chuanfei; Gao, Jinheng; Zhang, Yingjun; (39 pag.)CN106243052; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 288-36-8

To a mixture of the product from Step 2 (7.9 g, 38 mmol) , Cs2CO3 (24.8 g, 76 mmol) , and CuI (2.88 g, 7.6 mmol) in DMF (200 mL) was added 2H- [1, 2, 3] triazole (5.24 g, 76 mmol) and N,N’-dimethyl-cyclohexane-1, 2-diamine (0.9 g, 6.5 mmol) and the mixture was stirred at 110 overnight. The cooled mixture was adjusted topH 12 with 1 N sodium hydroxide and extracted with EtOAc (50 mL x 3) . The aqueous layer was adjusted topH 4 with 1 N HCl and extracted with EtOAc (50 mLx4) . The extracts were dried over Na2SO4, filtered, the filtrate concentrated in vacuo, and the residue was purified by silica gel column chromatography (petroleum ether: EtOAc10: 1) to provide the title compound. LRMS m/z (M+H) 196.0 found, 196.0 required.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 288-36-8.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott D.; LIVERTON, Nigel; LUO, Yunfu; (59 pag.)WO2016/101118; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 584-13-4, name is 4H-1,2,4-Triazol-4-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 4H-1,2,4-Triazol-4-amine

3,5-bis(1-cyano-1-methylethyl) benzyl bromide obtained in Step IV (600 g, 1.965 mol) was heated with 4-amino-1,2,4-triazole (247.9 g, 2.948 mol) in isopropanol (4.5 L) for 7 to 7.5 hours at 80 C. to 85 C. The reaction mass was gradually cooled to 20 C. to 25 C. The reaction mass was stirred for 1 hour. The reaction mass was further cooled to 0 C. to 5 C., stirred for 2 hours, filtered, and washed with dichloromethane (2×500 ml). The reaction mass was sucked dry. The dried cake was further dried at 40 C. to 45 C. under vacuum to obtained 2,2′-[5-(4-amino-1,2,4-triazolium-1-ylmethyl)-1,3-phenylene]di(2-methylpropio-nitrile)bromide (497.5 g, 65.0% yield). MP-198-203 C. IR (In cm-1, KBr): 3204, 3116, 3080, 2987, 2229, 1643, 1607, 1565, 1469, 1438, 1196, 1004 H1NMR (in CDCl3,delta (ppm)]: 10.31 (1H,s),9.20 (1H,s),7.66-7.63 (3H,s),6.984 (2H,s),5.657 (2H,s),1.71 ( 12H,s). M+[309] (free base)

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 4H-1,2,4-Triazol-4-amine, in my other articles.

Reference:
Patent; Glenmark Pharmaceuticals Limited; US2006/189670; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C2H5N5

In a 500 mL round-bottomed flask, lH-l,2,4-triazole-3,5-diamine (1.5 g, 15.1 mmol, Eq: 1.00) and sodium methoxide 1M (33.3 ml, 16.7 mmol, Eq: 1.1) were combined with MeOH (100 ml) to give a colorless turbid solution. The reaction mixture was stirred for 4 hr and stripped to a gray solid. Suspended in 30 ml DMF and l-(chloromethyl)-4-methoxybenzene (2.42 g, 2.1 ml, 15.4 mmol, Eq: 1.02) was added. The dark brown suspension was stirred at 25C for 60 hrs under argon. The reaction was diluted with water (35 ml) and extracted with EtOAc (3 x 50 ml). The organic layers were combined, washed with H20 (1 x 25 mL), sat NaCl (1 x 50 ml), dried over Na2S04 and concentrated in vacuo to a white pasty solid. Dried under vacuum while gently heating to remove residual DMF and PMB-C1. The crude material was purified by flash chromatography (silica gel, 80g, 0percent to 10percent MeOH in DCM) to give 457 mg of desired product as a yellow solid (14percent). MS (m+1) = 220.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 1455-77-2, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Zhi; CHIN, Elbert; ERICKSON, Shawn David; GABRIEL, Stephen Deems; MERTZ, Eric; WEIKERT, Robert James; WO2014/135483; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C3H5N3

To a mixture of 3-methyl- lH- l,2,4-triazole (330 mg, 3.97 mmol), 5-chloro-2-fluoro- benzaldehyde (425 mg, 2.68 mmol) in DMSO (5.0 mL) is added K2C03 (725 mg, 5.25 mmol). The reaction mixture is stirred at 100 C for 2 hours. The reaction mixture is allowed to cool to room temperature, diluted with CH2C12 (100 mL), and washed with H20 (75 mL x2). The organic layer is dried with Na2S04 and filtered. The filtrate is concentrated under reduced pressure and the residue is purified by silica gel flash column chromatography with 5% MeOH in EtOAc as the eluent to afford an impure mixture of 5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-benzaldehyde plus regiosiomer (270 mg).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 7170-01-6.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; CHEN, Zhidong; HAO, Ming-Hong; LIU, Weimin; LO, Ho-Yin; LOKE, Pui Leng; MAN, Chuk, Chui; MORWICK, Tina, Marie; NEMOTO, Peter, Allen; TAKAHASHI, Hidenori; TYE, Heather; WU, Lifen; WO2011/68821; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 16681-65-5

A solution of 1-methyl-1H-1,2,3-triazole (12.9 g, 155 mmol) in THF (260 mL) was cooled to -45 C. Maintaining a temperature of <-35 C., n-BuLi (62.1 mL, 2.5 M in hexanes, 155 mmol) was added over 10 minutes. The reaction mixture was stirred for 30 minutes with cooling to -45 C. and then treated with a sub-surface stream of CO2(g) for a period of 2 hours. After flushing the -35 C. slurry with N2(g) for 5 minutes, thionyl chloride (11.8 mL, 163 mmol) was added. The mixture was allowed to warm to room temperature with stirring over 1.25 hours. Addition of N,O-dimethylhydroxylamine hydrochloride (18.14 g, 186 mmol) and N,N-diisopropylethylamine (68.3 mL, 396 mmol) was followed by stirring for 15 hours. Aqueous sodium carbonate (500 mL, 10 wt %) was then added, and the layers were mixed and separated. The aqueous layer was washed with dichloromethane (250 mL and then 125 mL), and the combined organic layers were dried over MgSO4, filtered, and concentrated. The concentrate was taken up in ethyl acetate (225 mL), treated with MgSO4, and filtered through a pad of silica gel (115 g). The silica gel pad was washed with additional ethyl acetate (800 mL). The eluent was concentrated to dryness to provide the title compound as a yellow solid. The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 16681-65-5 Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics