Tag: M.W=0-100

Related Products of 288-36-8, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

1,2,3-triazole (3.45 g, 50 mmol), 2-iodo-5-methylbenzoic acid (5.24 g, 20 mmol), cesium carbonate (0.57 g, 3.6 mmol), cuprous iodide (0.38 g, 2 mmol), trans-N, N’-dimethyl-1,2-cyclohexanediamine (0.51 g, 3.6 mmol), N, N-dimethylformamide (30 mL)was added sequentially to a 100 mL single-necked round bottom flask and gradually heated under nitrogen to 100 C for 4 hours. The reaction was quenched, cooled, diluted with tap water and washed with ethyl acetate (200 mL x 2). The aqueous layer was acidified with concentrated hydrochloric acid (pH = 1~2) and extracted with ethyl acetate (200 mL x 2). The organic layers were combined and dried over anhydrous sodium sulfate. The filtrate was evaporated under reduced pressure and purified by column chromatography (dichloromethane / methanol (v/v) = 50/1) to give the title compound (yellow solid, 2.76 g, 68%).

We very much hope you enjoy reading the articles and that you will join us to present your own research about 288-36-8, Happy reading!

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Dongguan Dongyangguang Pharmaceutical Research And Development Co., Ltd.; Jin Chuanfei; Du Changfeng; Zhang Yingjun; Liu Yanping; Kou Yuhui; (38 pag.)CN106986859; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 16681-65-5

Intermediate 19: step a (2,6-dimethylpyridin-3-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol A solution of n-butyllithium in hexanes (2,5 M, 22,5 mL, 56.3 mmol) was added dropwise by syringe to a stirring solution of 1 -methyl- IH- 1 ,2,3-triazole (5.00 g, 60.2 mmol, prepared according to PCX Int. AppL, 2008098104) in dry tetrahydrofuran (400 mL) at -55 C. The resulting off-white slurry was stirred at -45 C for 20 minutes, whereupon a solution of 2,6- dimethyl-pyridine-3-carbaldehyde (8.33 g, 61 .7 mmol) in dry tetrahydrofuran (10 mL) was added dropwise by syringe. After 5 minutes, the cooling bath was removed and the reaction mixture was allowed to slowly warm. After 45 minutes, saturated aqueous ammonium chloride solution (10 mL) and ethyl acetate (100 mL) were added. The mixture was concentrated by- rotary evaporation. The residue was dissolved in ethyl acetate (300 mL). The organic solution was washed with saturated aqueous sodium chloride solution (100 mL, containing excess solid sodium chloride). The aqueous layer was extracted with ethyl acetate (2 x 100 mL). The organic layers were combined and the combined solution was concentrated. Ether (100 mL) was added to the residue and the mixture was sonicated for 20 minutes during which time a white solid crashed out. The solids were collected by filtration. Ether (100 mL) was added to the collected solids and the mixture sonicated a second time. After 20 minutes, the mixture was filtered and the solids were collected to provide the title compound as a fine powder.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 16681-65-5, and we look forward to future research findings.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2-chloro-5-nitro-3-(trifluoromethyl)pyridine (1.2 g, 6.84 mmol) and 2H-1,2,3-triazole (0.567 g, 8.20 mmol) in anhydrous DMA (5 mL) was added K2CO3 (1.89 g, 13.67 mmol). The reaction mixture was stirred at room temperature for 2 h. The mixture was filtered and washed with ethyl acetate (10 mL*3). The filtrate was concentrated to dryness to give a crude product.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,3-Triazole.

Reference:
Patent; Janssen Biotech, Inc.; Lu, Tianbao; Allison, Brett Douglas; Barbay, Joseph Kent; Connolly, Peter J.; Cummings, Maxwell David; Diels, Gaston; Edwards, James Patrick; Kreutter, Kevin D.; Philippar, Ulrike; Shen, Fang; Thuring, Johannes Wilhelmus John Fitzgerald; Wu, Tongfei; (412 pag.)US2018/170909; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-88-0

General procedure: To a solution of Cu(OAc)2·H2O (0.01 mmol) in DMF (2 mL) were added aryl iodide (1.2 mmol), nitrogen-containing heterocycle (1.0 mmol), and Cs2CO3 (2 mmol) under nitrogen atmosphere. The mixture was stirred at 110 C for 24 h. After cooling to ambient temperature, the mixture was partitioned between water and ethyl acetate. The organic layer was separated, and the aqueous layer was extracted with ethyl acetate. The combined organic layers were washed with brine, dried over Na2SO4, and concentrated in vacuo. The residue was purified by flash chromatography on silica gel.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazole help many people in the next few years.

Reference:
Article; Xu, Zhong-Lin; Li, Hong-Xi; Ren, Zhi-Gang; Du, Wei-Yuan; Xu, Wei-Chang; Lang, Jian-Ping; Tetrahedron; vol. 67; 29; (2011); p. 5282 – 5288;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 61-82-5, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A mixture of aldehyde (1.0 mmol), dimedone (1.0 mmol),1H-1,2,4-triazol-3-amine (1.0 mmol) and nano-AlPO4(SO3H) (0.1 g) was stirred in the acetonitrile (4.0 mL)at 50 C for an appropriate time. After the completion of thereaction as indicated by TLC, dichloromethane was addedto the solidified mixture and the insoluble catalyst was separatedby centrifugation. Evaporation of the solvent from thefiltrate and recrystallization of the solid residue from hot ethanolafforded the pure products in good to excellent yields

In the meantime we’ve collected together some recent articles in this area about 61-82-5 to whet your appetite. Happy reading!

Reference:
Article; Sharghi, Hashem; Aboonajmi, Jasem; Aberi, Mahdi; Shiri, Pezhman; Journal of the Iranian Chemical Society; vol. 15; 5; (2018); p. 1107 – 1118;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 1455-77-2, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: An equimolar solution of 3,5-diamino-1,2,4-triazole (0.99 g, 0.01 mol) and 2-hydroxynaphthaldehyde (1.72 g, 0.01 mol) in dry methanol (50 mL) was refluxed for 3 h, a precipitated product was formed during refluxing. It was then cooled to room temperature, filtered, washed with methanol (35 mL), then with diethyl ether (2 × 5 mL) and dried under vacuum. Recrystallization in a mixture of methanol:dioxane (1:4) gave TLC pure product (L1) in 83percent yield. The same method was applied for the preparation of all other ligands (L2)?(L5).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 3,5-Diamino-1,2,4-triazole is helpful to your research.

Reference:
Article; Sumrra, Sajjad H.; Chohan, Zahid H.; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 98; (2012); p. 53 – 61;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 584-13-4, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

I am very proud of our efforts over the past few months and hope to 4H-1,2,4-Triazol-4-amine help many people in the next few years.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7170-01-6, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 93Preparation of 4-(3-methyl-1H-1,2,4-triazol-1-yl)benzaldehyde (DI53); To a stiffing solution of 4-fluorobenzaldehyde (5.0 g, 40.32 mmol) in DMF (50 mL), were added K2CO3 (3.34 g, 40.32 mmol) and 3-methyl-1,2,4-trizole (3.34 g, 40.32 mmol) and the resultant reaction mixture was stirred at RT for 4 h. After completion of the reaction (TLC), the reaction mixture was diluted with water and extracted with EtOAc (3×). The combined EtOAc layer was washed with water and brine then dried over Na2SO4 and concentrated under reduced pressure to afforded the title compound as a white solid (4.1 g, 60%): mp 125-128 C.; 1H NMR (400 MHz, CDCl3) delta 10.05 (s, 1H), 8.76 (s, 1H), 8.02 (d, 2H), 7.85 (d, 2H), 2.50 (s, 3H); ESIMS m/z 188.04 ([M+H]+).

This is the end of this tutorial post, and I hope it has helped your research about 7170-01-6!

Reference:
Patent; Hunter, James E.; Lo, William C.; Watson, Gerald B.; Patny, Akshay; Gustafson, Gary D.; Pernich, Dan; Brewster, William K.; Camper, Debra L.; Lorsbach, Beth; Loso, Michael R.; Sparks, Thomas C.; Joshi, Hemant; Mandaleswaran, Adiraj; Sanam, Ramadevi; Gundla, Rambabu; Iyer, Pravin S.; US2012/329649; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7170-01-6

To a mixture of 3-methyl- lH- l,2,4-triazole (330 mg, 3.97 mmol), 5-chloro-2-fluoro- benzaldehyde (425 mg, 2.68 mmol) in DMSO (5.0 mL) is added K2C03 (725 mg, 5.25 mmol). The reaction mixture is stirred at 100 C for 2 hours. The reaction mixture is allowed to cool to room temperature, diluted with CH2C12 (100 mL), and washed with H20 (75 mL x2). The organic layer is dried with Na2S04 and filtered. The filtrate is concentrated under reduced pressure and the residue is purified by silica gel flash column chromatography with 5% MeOH in EtOAc as the eluent to afford an impure mixture of 5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-benzaldehyde plus regiosiomer (270 mg).To a mixture of 4-(2-amino-pyrimidin-5-yl)-Nl-ieri-butyl-benzene-l,2-diamine (270 mg, 1.05 mmol) and impure mixture of 5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-benzaldehyde plus regiosiomer (270 mg) in DMF (15.0 mL) is added Oxone (650 mg, 1.06 mmol) in H20 (5.0 mL). The reaction mixture is stirred at room temperature for 1.5 hours and then quenched with saturated sodium thiosulfate aq. (25 mL). The quenched reaction mixture is extracted with EtOAc (25 mL x2) and the combined organic layers are washed with H20 (50 mL x2), dried with Na2S04 and filtered. The filtrate is concentrated under reduced pressure and the residue is purified by silica gel flash column chromatography with 5% MeOH in CH2C12 as the eluent to afford an impure mixture of 5-(2-amino- pyrimidin-5-yl)- l-ieri-butyl-2-[5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-phenyl]-2,3- dihydro-lH-benzimidazol-2-ol plus regiosiomer (25 mg).I l l A mixture of 5-(2-amino-pyrimidin-5-yl)- l-ieri-butyl-2-[5-chloro-2-(3-methyl- l,2,4- triazol-l-yl)-phenyl]-2,3-dihydro-lH-benzimidazol-2-ol plus regiosiomer (25 mg) in MeOH (25 mL) is heated at 70 C for 16 hours. The reaction mixture is allowed to cool to room temperature and is concentrated under reduced pressure. The residue is purified by silica gel flash column chromatography with 5% MeOH in CH2CI2 as the eluent followed by further purification using a HPLC C- 18 column with CH3CN (0.1%TFA) in H20 (0.1%TFA) as the eluent to afford 5-{ l-ieri-butyl-2-[5-chloro-2-(3-methyl- l,2,4- triazol-l-yl)-phenyl]-lH-benzimidazol-5-yl}-pyrimidin-2-ylamine (Example 37) (9 mg, 37 %) as a white solid LCMS (ESMS): m/z 459.20 (M++l) and 5-{ l-ieri-butyl-2-[5- chloro-2-(5-methyl-l,2,4-triazol- l-yl)-phenyl]- lH-benzimidazol-5-yl}-pyrimidin-2- ylamine (Example 38) (6 mg, 25 %) as a white solid. LCMS (ESMS): m/z 459.20 (M++l)

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 3-Methyl-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; CHEN, Zhidong; HAO, Ming-Hong; LIU, Weimin; LO, Ho-Yin; LOKE, Pui Leng; MAN, Chuk, Chui; MORWICK, Tina, Marie; NEMOTO, Peter, Allen; TAKAHASHI, Hidenori; TYE, Heather; WU, Lifen; WO2011/68821; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 6086-21-1, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 6086-21-1, name is 1-Methyl-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

a) To a solution of 1-methyl-1,2,4-triazole (3.0 g, 36.1 mmol) in tetrahydrofurane (60 ml) was added n-buthyllithium (43.3 mmol, 1.2 eq) at -78° C. under nitrogen. The mixture was stirred for 1 hour, then diethyl 3-oxo-butylphosphonate (8.3 g, 39.7 mmol, 1.1 eq) was added. The mixture was stirred for 2 hours and quenched with aq. NH4 Cl (ca. 15 ml). The mixture was warmed to room temperature and extracted with CH2 Cl2 (5*100 ml). The extract was dried over MgSO4, concentrated in vacuo, and purified by a silica gel column chromatography (200 g, AcOEt-EtOH) to give (2.99 g, 28percent yield) of diethyl 3-hydroxy-3-methyl-3-(1-methyl-1,2,4-triazol-5-yl)propyl-phosphonate. 1 H NMR (90 MHz, CDCl3) delta 7.75 (s, 1H), 4.13 (s, 3H), 4.29-3.90 (m, 4H), 2.80-1.80 (m, 5H), 1.63 (s, 3H), 1.37 (t, 3H, J=7.0 Hz), 1.33 (t, 3H, J=7.0 Hz).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1-Methyl-1,2,4-triazole.

Reference:
Patent; Japat Ltd.; US5248655; (1993); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics