Tag: M.W=0-100

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 1-Methyl-1H-1,2,3-triazole

To a flask containing 1-methyl-1H-1,2,3-triazole (430 mg, 0.8 mmol) was added THF (15 mL) and the solution was cooled to -43 C. using a CH3CN-CO2 bath. Then, n-BuLi, (2.5 M in hexanes, 0.7 mL, 1.75 mmol) was added dropwise. The reaction mixture was stirred at -40 C. for 30 minutes, then tert-butyl-3-(4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinoline-6-carbonyl)-azetidine-1-carboxylate (430 mg, 0.8 mmol, Intermediate 61: step b) in 2 mL THF was introduced. The reaction mixture was allowed to warm to room temperature over 30 minutes, and was quenched after 45 minutes with aqueous NH4Cl solution. The aqueous portion was extracted with EtOAc (3*30 mL). The combined organics were washed with brine, dried over MgSO4, filtered and concentrated. Chromatography on Silica gel (10% acetone-hexane increasing to 30% acetone) afforded the title compound as a white amorphous solid. 1H NMR (500 MHz, CDCl3) delta 8.24 (d, J=2.1 Hz, 1H), 7.78 (d, J=8.8 Hz, 1H), 7.56-7.47 (m, 3H), 7.40 (d, J=8.1 Hz, 2H), 7.35 (dd, J=8.7, 2.1 Hz, 1H), 4.35 (s, 2H), 4.20 (t, J=8.8 Hz, 1H), 4.07 (s, 3H), 4.00 (dd, J=9.3, 5.6 Hz, 1H), 3.92 (dd, J=8.9, 5.7 Hz, 1H), 3.67 (s, 3H), 3.62 (t, J=8.8 Hz, 1H), 3.52-3.38 (m, 1H), 1.38 (s, 9H); MS (ESI): mass calcd: Chemical Formula: C30H31ClF3N5O4; Exact Mass: 617.2. m/z found 617.8 [M+H]+.

If you are hungry for even more, make sure to check my other article about 16681-65-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; Jones, William Moore; Goldberg, Steven; US2015/105366; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A mixture of 3 -methyl- IH-1, 2,4-triazole (8.12 g, 98 mmol), l,2,3-trifluoro-5-nitrobenzene (17.3 g, 98 mmol), and sodium bicarbonate (8.21 g, 98 mmol) in DMSO (100 mL) was heated at 800C for 24 h . The reaction mixture was allowed to cool to rt and was poured into water (800 mL). The aqueous mixture was extracted with EtOAc (3 x 200 mL). The combined organic extracts were sequentially washed with water (500 mL) and brine solution (100 mL). The organic layer was dried over sodium sulfate, filtered, and concentrated in vacuo. The crude reaction mixture was purified using silica gel chromatography (30-80% EtOAc/hexane, linear gradient) to afford a 1.7:1.0 mixture of two regioisomeric products as an orange solid. The orange solid was recrystallized from EtOAc (hot- cold) to provide 4.25 g of l-(2,6-difluoro-4-nitrophenyl)-3-melhyl-lH-l.,2,4-triazole as a white solid. The mother liquor was recrystalized from EtO Ac/Hex (hot-rt) to afford 1.89 g of l-(2,6-difluoro-4-nitrophenyl)-5-methyl-lH-l,2,4-triazole as a light yellow solid. The mother liquor was repeatly chromatographed under the previously stated conditions to provide two samples. One sample was partially enriched in the slightly less polar isomer, l-(2,6-difluoro-4~nitrophenyl)-3-memyl-lH-l,2,4-t?azole. The other sample was partially enriched in the slightly more polar isomer, l-(2,6- difluoro-4-nitrophenyl)-5-methyl-lH-l,2,4~triazoe. Both samples were independently recrystallized from EtO Ac/Hex to provide an additional 1.9 g of 1- (2,6-diiluoro-4-nitrophenyl)-3 -methyl- 1 H- 1 ,2,4-triazole and 1.37 g of l-(2,6- difluoro-4-nitrophenyl)-5-methyl- 1 H- 1 ,2,4-triazole. A combined total of 6.15 g (26 % yield) of 1 -(2,-difluoro-4-nitrophenyl)~3-methyl-l H- 1 ,2,4-triazole and 3.2 g (13% yield) of l-(2,6-difluoro-4-nitrophenyl)-5-methyl- IH-1 ,2,4-triazole was obtained.Data for 1 -(2 s6-difluoro-4-nitrophenyl)-3 -methyl- 1 H- 1 ,2,4-triazole: LC-MS(M+H)+ = 241.0. 1H NMR (500 MHz, CHLOROFORM-d) delta ppm 8.34 (s, 1 H), 8.01- 8.10 (m, 2 H)5 2.54 (s, 3 H). Data for l-(2,6-difluoro-4-nitrophenyl)-5-methyl-lH-l,2,4-triazole: LC-MS(M+H)+ = 241.0. IH NMR (500 MHz, CHLOROFORM-d) delta ppm 8.08 (s, 1 H)5 8.04- 8.08 (m, 2 H), 2.45 (s, 3 H). An X-ray analysis of a single crystal grown from EtOAc/hexanes confirmed the regiochemical assignment of this isomer as the 5- methyl congener.

I am very proud of our efforts over the past few months and hope to 3-Methyl-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; MARCIN, Lawrence, R.; THOMPSON, Lorin, A., III; BOY, Kenneth, M.; GUERNON, Jason, M.; HIGGINS, Mendi, A.; SHI, Jianliang; WU, Yong-Jin; ZHANG, Yunhui; MACOR, John, E.; WO2010/83141; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

A mixture of 2-chloro-5-nitropyridine-3-carbonitrile (9.0 g, 49 mmol), 2H-[1,2,3]Triazole (3.41 mL, 58.8 mmol) and potassium carbonate (20.32 g, 147 mmol) in acetonitrile (225 mL) was stirred at 30 C. for 2 h. Water and ethyl acetate were added and the organic phase was separated, dried with MgSO4, filtered and the filtrate concentrated to afford the crude product, which was mixed with dichloromethane (30 mL) and filtered to afford pure 5-nitro-2-[1,2,3]triazol-2-yl-nicotinonitrile (8.3 g, 78.4% yield) as an orange solid. 1H NMR (300 MHz, DMSO-d6) delta 8.46 (s, 2H), 9.45 (d, J=2.5 Hz, 1H), 9.61 (d, J=2.5 Hz, 1H). LC-MS m/z 217.0 (M+H)+.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 288-36-8, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; Lu, Tianbao; Connolly, Peter J.; Cummings, Maxwell David; Barbay, Joseph Kent; Kreutter, Kevin D.; Wu, Tongfei; Diels, Gaston Stanislas Marcella; Thuring, Jan Willem; Philippar, Ulrike; Edwards, James Patrick; Shen, Fang; (202 pag.)US2019/381019; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[00112] 1 -Methyl-1 H-1 ,2,3-triazole (41 mg, 0.495 mmol) was dissolved in THF (4.9 mL) and cooled to -78 C. n-Butyllithium solution in hexanes (240 muIota_, 0.594 mmol) was added dropwise and the solution was stirred for further 5 min before zinc(ll) chloride (3.0 mL, 1 .485 mmol) was added. After 30 min at -78 C, the reaction mixture was diluted with DMF (2.0 mL), tetrakis(triphenylphosphine)palladium(0) (29 mg, 0.025 mmol) and a solution of 4-bromo-2-methoxy-1 -nitrobenzene (1 15 mg, 0.495 mmol) in DMF (500 mu) were added. The solution was stirred at 80 C for 2.5 h. After the mixture was cooled to room temperature, water and EtOAc were added and the phases were separated. The organic phase was washed with water, brine, dried (Na2S04) and the solvent was removed in vacuo. The residue was purified by Biotage silica gel column chromatography eluting with DCM/EtOAc (99/1 to 90/10, 10 g column) to afford the title product as a pale yellow solid (82 mg, 70.7 %). 1 H NMR (500 MHz, CDCI3): <5 4.04 (s, 3H), 4.14 (s, 3H), 7.10-7.13 (m, 2H), 7.82 (s, 1 H), 7.98-8.01 (m, 1 H); LC (Method B)-MS (ESI, m/z) fR 1 .97 min, 235 [(M+H+), 100%]. By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1-Methyl-1H-1,2,3-triazole. Reference:
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; NAUD, Sebastien Gaston Andre; BLAGG, Julian; (38 pag.)WO2017/109476; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 1455-77-2, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, molecular formula is C2H5N5, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

It has been reported that the salts of 1,2,4-triazole and 3-amino-1,2,4-triazole could be obtained via an acid-base neutralization [29, 30]. Likewise, the LiDAtz with two amino groups on the triazole ring was prepared by the neutralization from equimolar 3,5-diamino-1H-1,2,4-triazole (DAtzH) and LiOH. Briefly, equimolar DAtzH and LiOH were added into deionized water separately, mixed and kept reacting and stirring at room temperature for 24 h, and the synthetic process is listed in Scheme 1. The product, a yellow powder, was obtained with 96.8% yield after evaporation of water and then drying at 120 C under vacuum for 24 h. 13C Nuclear magnetic resonance (NMR, 400 MHz, D2O): 161.73 ppm. Fourier transform infrared (FT-IR, KBr, cm-1) spectra: 3374, 3417 (w, nuNH2), 3335 (m, nuH2O), 1608 (m, deltaNH2), 1558 (m, nuC-N), 1475 (s, nuC-N), 1382 (m, nuC-N-C), 1070 (m, nuC-N), 688, 773 (w, deltaN-C-N). Elemental analyses (EA; C2H4N5Li, 105.06): found: C 13.22, H 2.20, N 78.42%; calculated: C 13.20, H 2.22, N 76.96%. High-resolution mass spectra [HRMS-electrospray ionization (ESI)]: m/z: [M+H+] calcd. for C2H5LiN5: 106.0700, found: 106.0700.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 3,5-Diamino-1,2,4-triazole, hurry up and to see.

Reference:
Article; Fei, Yuqing; Liu, Shimin; Lu, Liujin; He, Yude; Deng, Youquan; Research on Chemical Intermediates; vol. 44; 12; (2018); p. 7187 – 7204;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 5-Methyl-4H-1,2,4-triazol-3-amine

2-(2,3-Dihydrobenzofuran-5-yl)-N-(3-methyl-1H-1,2,4-triazol-5-yl)thiazole-4- To a mixture of 2-(2,3-dihydro-l-benzoruran-5~yl)-l,3-thiazole-4-carboxylic acid (126 mg, 0.51 mmol), lH-l ,2,4-triazol-5-amine (50 mg, 0.51 mmol) and 2-(lH-benzotriazole-l-yl)- 1 ,1 ,3,3-tetramethyluroniurn hexafluorophosphate (HBTU) (120 mg, 0.32 mmol) under stirring and heating at 1 10 C 2 ml of dry pyridine were added. The mixture was heated at 110 C for 5 h, pyridine was evaporated, and the residue was diluted with an aqueous Na2C03 solution. The resulting precipitate was filtered off, dissolved in hot NN-dimethylformamide, settled by addition of EtOAc and hexane, filtered off and dried. The product was obtained as a light yellow solid (82 mg, 0.25 mmol, 49 % yield). NMR (400 MHz, OMSO-d6, CC14) delta ppm 2.29 (3 H, bs, CH3), 3.30 (2 H, t, CH2CH20), 4.64 (2 H, t, OCH2), 6.80 (1 H, d, CH-arom.), 7.82 (1 H, d, CH-arom.), 8.00 (1 H, s, CH-arom.), 8.31 (1 H, bs, CH-thiazol), 1 1.20 (1 H, bs, NH), 12.95 (1 H, bs, NH). LC/MS [M+H]+: 328.0

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 4923-01-7

Reference:
Patent; 4SC DISCOVERY GMBH; LEBAN, Johann; ZAJA, Mirko; WO2014/202638; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C2H2N3Na

EXAMPLE 3; Preparation of crude Anustrozole:Tupsilon the title compound of example 2 (50g) in dry DMF (250ml), anhydrous potassium carbonate (26g) and triazole sodium salt (232 g) are added and the mixture stirred at room 25 temperature for 45 min. Worked up the reaction mixture by adding water ( 1500 ml) and extraction with toluene (3 x 300ml). Combined toluene layer is washed with water (1 x300ml), washed toluene layer is dried over anhydous sodium sulphate, fitered and evaporated toluene to obtain crude anastrozole (4Og) having isomeric impurity 0.5%. EXAMPLE 4Preparation of crude Anastrozole:To the title compound of example 2 (500g) in dry DMF (250ml), anhydrous potassium carbonate (26Og) and triazole sodium salt (2320 g) are added and the mixture stirred at room iemperature for 45 min. Worked up the reaction mixture by adding water ( 15000 ml) and extraction with toluene (3 x 3000ml). Combined toluene layer is washed with water ( 1 3000ml), washed toluene layer is dried over anhydrous sodium sulphate, filtered and evaporated toluene to obtain crude anastrozole (45Og) having isomeric impurity 0.5%. EXAMPLE 5 Preparation of crude Anastrozole:To the title compound of example 2 (5Og) in dry DMF (250ml) anhydrous potassium carbonate (26g) and triazole sodium salt (232 g) are added and the mixture stirred at room temperature for 45 min. Worked up the reaction mixture by adding water (750 ml) and extracting with toluene (3 x 300ml). Combined toluene layer is washed with water ( 1 x300ml).The washed toluene layer is dried over anhydrous sodium sulphate, filtered and evaporated toluene to obtain crude anastrozole (42g) having isomeric impurity 4.52%.EXAMPLE 6Preparation of crude Anastrozole: To the title compound of example 2 (5Og) in dry DMF (250ml) anhydrous potassium carbonate (26g) and triazole sodium salt (232 g) are added and the mixture stirred at room temperature for 45 min. Worked up the reaction mixture by adding water (950 ml) and extracting with toluene (3 x 300ml). Combined toluene layer is washed with water ( 1 x30ml).The washed toluene layer is dried over anhydrous sodium sulphate, filtered and evaporated toluene to obtaincrude anastrozole (42g) having isomeric impurity 2.6%.EXAMPLE7Preparation of crude Anastrozole:To the title compound of example 2 (5Og) in dry DMF (250ml) anhydrous potassium carbonate (26g) and triazole sodium salt (232 g) are added and the mixture stirred at room temperature for 45 min. Worked up the reaction mixture by adding water (2500 ml) and extracting with toluene (3 x 300ml). Combined toluene layer is washed with water ( 1 .300ml).The washed toluene layer is dried over anhydrous sodium sulphate, filtered and evaporated toluene to obtain crude anastrozole (42g) having isomeric impurity 3.2%.

If you are hungry for even more, make sure to check my other article about 41253-21-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SHILPA MEDICARE LTD.; WO2007/105231; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1H-1,2,4-Triazole

Intermediate 82: step a 4-(1H-1,2,4-triazol-1-yl)benzaldehyde 4- Fluorobenzaldehyde (12.0 mL, 1 12 mmol) was added dropwise by syringe to a stirring, heterogeneous mixture of 1,2,4-triazole (11.6 g, 168 mmol) and potassium carbonate (24.7 g, 179 mmol) in dimethyl formamide (220 mL) at 23 C. The mixture was heated to 105 C. After 3.5 hours, the mixture was allowed to cool to 23 C. The cooled solution was transferred to a 2 L Erlenmeyer flask and diluted with water (500 mL) and ethyl acetate ( 200 mL). The biphasic mixture was stirred until the layers cleanly separated. The layers were separated. The organic layer was washed with half-saturated aqueous sodium chloride solution (3 100 mL). The washed solution was dried with sodium sulfate, and the dried solution was filtered. The filtrate was concentrated to provide an off-white solid. The solid was suspended in a mixture of heptanes and isopropyl acetate (5: 1, 600 mL). The mixture was filtered and the filter cake was washed with heptanes-isopropyl acetate (5: 1). The solids were collected and dried under vacuum to afford the title compound as a white solid.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole, in my other articles.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1H-1,2,4-Triazol-5-amine

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazol-5-amine, in my other articles.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C3H5N3

General procedure: Methyl 2,6-difluoro-4-{[(4-iodophenyl)sulfonyl]amino}benzoate (4.5 g, 9.9 mmol) was dissolved in N-methylpyrrolidone (90 ml), and 1,2,3-triazole (1.50 g, 21.7 mmol), copper(I) iodide (1.20 g, 6.30 mmol), potassium phosphate (6.0 g, 28 mmol), and trans-N,N?-dimethylcyclohexane-1,2-diamine (1.50 g, 10.5 mmol) were added thereto, followed by stirring at 145 C. for 12 hours in the presence of nitrogen gas. After cooling to room temperature, the reaction solution was diluted with water, followed by extraction with ethyl acetate (150 ml×5). The extraction liquids were combined, washed with saturated aqueous sodium chloride, and dried over anhydrous sodium sulfate. Then, the solvent was removed. The obtained residue was purified by silica gel column chromatography (petroleum ether/ethyl acetate=2:1 to 1:1) to obtain methyl 2,6-difluoro-4-({[4-(1H-1,2,3-triazol-1-yl)phenyl]sulfonyl}amino)benzoate (M-17) (650 mg, 17%) and methyl 2,6-difluoro-4-({[4-(2H-1,2,3-triazol-2-yl)phenyl]sulfonyl}amino)benzoate (M-18) (800 mg, 20%). The title compound (252 mg, 4%) was obtained as a white solid by subjecting methyl 2,5-difluoro-4-[(4-iodophenyl)sulfonylamino]benzoate (7.00 g, 15.5 mmol) and 4-methyl-1H-triazole (2.50 g, 30.1 mmol) to the same methods as in Examples 15 to 18. [1338] 1H NMR (400 MHz, DMSO-d6): delta 11.18 (s, 1H), 8.67 (s, 1H), 8.15 (m, 2H), 8.06 (m, 2H), 7.68-7.63 (m, 1H), 7.34-7.29 (m, 1H), 3.80 (s, 3H), 2.33 (s, 3H)

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 4-Methyl-1H-1,2,3-triazole help many people in the next few years.

Reference:
Patent; AJINOMOTO CO., LTD.; Ueno, Hirokazu; Yamamoto, Takashi; Takashita, Ryuta; Yokoyama, Ryohei; Sugiura, Toshihiko; Kageyama, Shunsuke; Ando, Ayatoshi; Eda, Hiroyuki; Eviryanti, Agung; Miyazawa, Tomoko; Kirihara, Aya; Tanabe, Itsuya; Nakamura, Tarou; Noguchi, Misato; Shuto, Manami; Sugiki, Masayuki; Dohi, Mizuki; US2015/51395; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics