Tag: M.W=0-100

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 584-13-4, name is 4H-1,2,4-Triazol-4-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 584-13-4

The synthetic pathways for the preparation of target compounds 1-9 and 24-41 are depicted in FIG. 2. We synthesized compounds 1-9 using a straightforward strategy, which involved the Grignard reactions of 2,4-difluoro-alpha-(1H-1,2,4-triazolyl)acetophenone with different alkyl magnesium bromide in the presence of magnesium bromide ethyl etherate. Compounds 24-41 were prepared in three steps. 4-Amino-1,2,4-triazole was reacted with various 2-haloacetophenone in refluxing isopropanol to give 10-16 in excellent yields (88-96%). Compounds 10-16 were conveniently deaminated by NaNO2 in aqueous HCl at room temperature. The desired products 17-23 were precipitated after neutralization of the reaction with potassium carbonate. The precipitates were collected by filtration and washed with water to afford pure products. No further purification was required because the excess of reactants was soluble in water and removed by filtration.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 584-13-4, and we look forward to future research findings.

Reference:
Patent; University of Kentucky Research Foundation; Garneau-Tsodikova, Sylvie; Shrestha, Sanjib K.; Garzan, Atefeh; Chandrika, Nishad Thamban; (54 pag.)US2018/194742; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 41253-21-8, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

At room temperature, 113g of acetonitrile was added to the four-necked flask.1,2,4-triazole sodium salt (18.20 g, 0.2 mol),2,4′-Dichloroacetophenone (37.80 g, 0.2 mol), heated to 80-85 C,The reaction was 1-2 h, the reaction was completed, the solvent was evaporated to dryness under reduced pressure, 50 g of water was added, and extracted with 150 g of dichloromethane, and washed with water.The solvent was dried to give a white solid with a qualitative content of 98%.The weight yield was 96%.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about Sodium 1,2,4-triazol-1-ide, hurry up and to see.

Reference:
Patent; Huai’an Guorui Chemical Co., Ltd.; Wu Yaojun; Zhang Pu; Zhao Wei; Jin Yucun; Wang Fengyun; Chen Mingguang; Mao Gengsheng; (11 pag.)CN109553583; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 60166-43-0, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 60166-43-0, name is 1,4-Dimethyl-1H-1,2,3-triazole, molecular formula is C4H7N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

(R)-l-(7-Chloro-5-(phenyl(tetrahydro-2H-pyran-4-yl)methyl)-5H-pyrrolo[2,3- b:4,5-b’]dipyridin-3-yl)ethanone (30.0 mg, 0.071 mmol), l,4-dimethyl-lH-l,2,3-triazole (10.4 mg, 0.107 mmol), tetramethylammonium acetate (11.4 mg, 0.086 mmol), and PdCl2(PPh3)2 (5.0 mg, 7.1 muetaiotaomicron) were weighed into a 20 mL scintillation vial. DMF (2 mL) was added and the air replaced with nitrogen. The reaction mixture was stirred at 100 C ovemight. The reaction was cooled to room temperature, diluted with EtOAc, and washed twice with brine. The organic layer was dried over MgSC>4 and concentrated. The crude material was purified via preparative LC/MS with the following conditions: Column: XBridge C18, 19 x 200 mm, 5-mupiiota particles; Mobile Phase A: 5:95 methanol: water with 10-mM ammonium acetate; Mobile Phase B: 95:5 methanol: water with 10- mM ammonium acetate; Gradient: 50-90% B over 20 min, then a 5-min hold at 100% B; Flow: 20 mL/min. Fractions containing the desired product were combined and dried via centrifugal evaporation. The yield of the product was 84%. LC/MS [M+H]+ = 481 NMR (500MHz, DMSO-de) delta 9.13 (s, 1H), 8.84 (d, J=8.1 Hz, 2H), 7.72 (d, J=8.1 Hz, 3H), 7.33 – 7.28 (m, 2H), 7.25 – 7.21 (m, 1H), 6.04 (br. s., 1H), 4.34 (s, 3H), 3.89 (d, J=10.3 Hz, 1H), 3.72 (d, J=9.2 Hz, 1H), 3.58 (br. s., 1H), 3.51 (s, 3H), 3.46 – 3.39 (m, 1H), 3.25 – 3.15 (m, 1H), 2.78 (s, 3H), 1.59 (br. s., 1H), 1.51 (d, J=8.8 Hz, 1H), 1.31 (d, J=10.3 Hz, 1H), 1.07 (d, J=14.3 Hz, 1H).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1,4-Dimethyl-1H-1,2,3-triazole.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; NORRIS, Derek J.; VACCARO, Wayne; DEBENEDETTO, Mikkel V.; DEGNAN, Andrew P.; DELUCCA, George V.; DESKUS, Jeffrey A.; HAN, Wen-Ching; KUMI, Godwin Kwame; SCHMITZ, William D.; STARRETT, John E., JR.; HILL, Matthew D.; HUANG, Hong; (563 pag.)WO2016/183118; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 4923-01-7, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 25. Og 3-amino-5-methyltriazole and 66.0ml_ diethyl phenylmalonate in 100ml_ N,N-dibutylbutan-1 -amine was stirred at 185C for 20h. The reaction mixture consisted of two layers after cooling to room temperature. The top layer was removed and the lower layer was diluted with 10% w/w sodium hydroxide solution and water. The aqueous layer was extracted with diethyl ether and acidified with concentrated hydrochloric acid until precipition of the product was complete. The precipitate was collected by filtration to yield the product, which was used without further purification.MS (M+1 ): 243Characteristic 1 H NMR (200MHz, d6-DMSO) signals: 7.4 (m, 2H); 7.3 (m, 2H); 7.2 (m, 1 H); 2.4 (s, 3H) ppm.

This is the end of this tutorial post, and I hope it has helped your research about 4923-01-7!

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; INCE, Stuart; REHWINKEL, Hartmut; HAEGEBARTH, Andrea; POLITZ, Oliver; NEUHAUS, Roland; BOeMER, Ulf; WO2012/7416; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

General procedure: A mixture of CuI (0.10 g, 0.50 mmol), the required azole(10 mmol), K3PO4 (4.4 g, 20 mmol), the required halide (12 mmol)and N,N0-dimethylethylenediamine (0.11 mL, 1.0 mmol) in DMF(5 mL) was degased and heated under argon at 110 C for 72 h.After filtration over celite (washing using AcOEt) and removal ofthe solvents, the crude product is purified by chromatography oversilica gel (the eluent is given in the product description). 4.3.1 1-Phenyl-1H-1,2,4-triazole (2a) Compound 2a was prepared from 1,2,4-triazole (0.69 g) and iodobenzene (1.4 mL) using the general procedure 1, and was isolated (eluent: heptane/AcOEt 7:3) in 96% yield as a yellow powder: mp 48 C (lit. 28 46 C); 1H NMR (CDCl3, 300 MHz) 7.42 (m, 1H), 7.53 (m, 2H), 7.71 (m, 2H), 8.15 (s, 1H), 8.74 (s, 1H); 13C NMR (CDCl3, 75 MHz) 120.1 (2CH), 128.3 (CH), 129.9 (2CH), 137.1 (C), 140.9 (CH), 152.7 (CH).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole, in my other articles.

Reference:
Article; Nagaradja, Elisabeth; Bentabed-Ababsa, Ghenia; Scalabrini, Mathieu; Chevallier, Floris; Philippot, Stephanie; Fontanay, Stephane; Duval, Raphael E.; Halauko, Yury S.; Ivashkevich, Oleg A.; Matulis, Vadim E.; Roisnel, Thierry; Mongin, Florence; Bioorganic and Medicinal Chemistry; vol. 23; 19; (2015); p. 6355 – 6363;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 41253-21-8, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

2-(1H-1,2,4-Triazol-1-yl)benzonitrile. A suspension of 2-fluorobenzylnitrile (3.0 g, 25 mmol) and 1,2,4-triazole sodium salt (2.4 g, 27 mmol) were stirred in tetrahydrofuran (7 mL) and dimethylformamide (14 mL) at 95 C. for 18 h. After cooling and concentrating, the product was crystallized from hot CH2Cl2/hexane (1:1) to give the title compound as a white solid (4.25 g, 100% yield). 1H-NMR (300 MHz, CDCl3) delta ppm: 8.74 (1H, s), 8.16 (1H, s), 7.82 (1H, dd, J=4.9, 1.3 Hz), 7.77-7.25 (2H, m), 7.57-7.51 (1H, m). LCMS [M+H]+ calcd for C9H7N4: 171.06. found: 171.12

I am very proud of our efforts over the past few months and hope to Sodium 1,2,4-triazol-1-ide help many people in the next few years.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/129379; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 60166-43-0, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 60166-43-0, name is 1,4-Dimethyl-1H-1,2,3-triazole, molecular formula is C4H7N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A mixture of 7-bromo-5-nitroisoquinolin-1(2H)-one (2b, 4.00 g, 14.9 mmol), 1,4- dimethyl-1H-1,2,3-triazole (2.17 g, 22.3 mmol), palladium acetate (334 mg, 1.49 mmol), CatacXiumA (butyl di-1-adamantylphosphine) (1.10 g, 2.97 mmol), and potassiumacetate (7.30 g, 74.3 mmol) in 2-methyl-2-butanol (100 mL) was degassed with nitrogen, and heated at 120 C in a sealed tube overnight. After cooling to room temperature, the reaction mixture was partitioned between ethyl acetate (300 mL) and water (300 mL). The organic phase was separated, washed with brine (300 mL), dried over sodium sulfate, concentrated to dryness, and purified by silica gel chromatography(eluting with a gradient of 0%-i 0% methanol in ethyl acetate), affording 7-(i 4-dimethyl- iH-i,2,3-triazol-5-yl)-5-nitroisoquinolin-i(2H)-one (2c, 2.55 g, 60%) as a solid. 1H NMR (400 MHz, DMSO-d6) oe 11.95 (br. s., 1 H), 8.57 (5, 2H), 7.55 (d, J=5.38 Hz, 1 H), 6.98 (d, J=7.34 Hz, iH), 4.00 (5, 3H), 2.29 (5, 3H). MS: 284 [M-i].

I am very proud of our efforts over the past few months and hope to 1,4-Dimethyl-1H-1,2,3-triazole help many people in the next few years.

Reference:
Patent; PFIZER INC.; KUMPF, Robert Arnold; KUNG, Pei-Pei; SUTTON, Scott Channing; WYTHES, Martin James; (138 pag.)WO2015/193768; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 5-Methyl-4H-1,2,4-triazol-3-amine

General procedure: 3-Amino-1,2,4-triazole 8a-f (1.0 mmol), o-hydroxybenzaldehyde9a-e (1.0 mmol), acetone (10) (0.22 ml,3.0 mmol), and abs. EtOH (2 ml) were mixed in amicrowave process vial, and then 4 N solution of HCl indioxane (0.07 ml, 0.3 mmol) was added. The mixture wasirradiated at 150C for 30 min. The reaction mixture wascooled by an air flow and stirred for 24 h at roomtemperature for complete precipitation of the product. Theprecipitate was filtered off, washed with EtOH (1 ml) andEt2O (3×1 ml), and dried. Compounds 1a-w were obtainedin a form of white solids.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 5-Methyl-4H-1,2,4-triazol-3-amine ,and how the biochemistry of the body works.

Reference:
Article; Guemue?, Mustafa K.; Gorobets, Nikolay Yu.; Sedash, Yuriy V.; Chebanov, Valentin A.; Desenko, Sergey M.; Chemistry of Heterocyclic Compounds; vol. 53; 11; (2017); p. 1261 – 1267; Khim. Geterotsikl. Soedin.; vol. 53; 11; (2017); p. 1261 – 1267,7;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-36-8, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), Cs2CO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-5, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. Data for A-5: 1HNMR (500 MHz, DMSO-d6) d 12.98 (br s , IH), 8.04 (s, 2H), 7.72-7.45 (m, 3H), 2.41 (s, 3H) ppm.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,3-Triazole.

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; COLEMAN, Paul, J.; SCHREIER, John, D.; WO2010/48014; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 3-Methyl-1H-1,2,4-triazole

A mixture of 1.66 g (20 mmol) of 3-methyl-1,2,4-triazole and 16.6 ml of tetrahydrofuran was added dropwise, and 2.29 g (10 mmol) of pure 2-bromoisobutyryl bromide was added dropwise over 30 minutes, The mixture was further stirred for 2 hours, filtered and the insoluble material was filtered off and the filtrate was concentrated to dryness under reduced pressure. 5 ml of methyl tert-butyl ether was added, stirred for 30 minutes, filtered, and the cake was dried to obtain 2.09g of product, yield 90%.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 7170-01-6.

Reference:
Patent; Ningbo Baisijia Pharmaceutical Technology Co., Ltd.; Jin Chunhua; Tang Jianbo; Wang Kedi; Zhu Qinfeng; (13 pag.)CN106866558; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics