Tag: M.W=0-100

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 16681-65-5

Compound 6. To a solution of compound 4 (5 g, 60 mmol, 1 eq.) in THF (120 mL) was added LDA (2M in THF, 45 mL, 1.5 eq.) dropwise at -78 C under N2. After the mixture was stirred at -78 C for 1 h, compound 5 (6.33 g, 90.3 mmol, 6.7 mL, 1.5eq.) was added dropwise at -78 C. The mixture was stirred at -78 C for additional 2 h under N2. The reaction mixture was then poured into ice sat. NH4Cl (100 mL) and extracted with DCM (150 mL x 5). The combined organics were washed with brine (200 mL), dried over Na2SO4, filtered, concentrated, and purified by column chromatography (SiO2, petroleum ether/ethyl acetate (1:1 to 0:1)) to afford compound 6 as a yellow solid. 1H-NMR (CDCl3, 400 MHz) delta 7.61 (s, 1H), 4.16-4.12 (m, 1H), 4.11 (s, 3H), 2.82 (d, J = 5.1 Hz, 1H), 1.37 (tq, J = 4.9, 8.2 Hz, 1H), 0.78-0.66 (m, 2H), 0.57-0.48 (m, 1H), 0.42-0.30 (m, 1H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1-Methyl-1H-1,2,3-triazole, in my other articles.

Reference:
Patent; YISSUM RESEARCH DEVELOPMENT COMPANY OF THE HEBREW UNIVERSITY OF JERUSALEM LTD.; SNIR-ALKALAY, Irit; VACCA, Joseph; BEN-NERIAH, Yinon; (238 pag.)WO2019/155468; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 41253-21-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(3) Synthesis of intermediate 5-(4-chlorobenzyl)-2-methoxymethoxymethyl-2-methyl-1-(1H-1,2,4-triazol-1-ylmethyl)cyclopentanol (Compound (VII), R1 =CH3, Ym =4-Cl, G=CH2OCH3, A=N)1H-1,2,4-Triazole sodium salt (1.196g, 13.1 mmol) was dissolved in NMP (7 ml), and heated to an internal temperature of 115 degrees C. To this, 5-(4-chlorobenzyl)-2-methoxymethoxymethyl-2-methylcyclopentanone (Compound (IX), R1 =CH3, Ym =4-Cl, G=CH2OCH3) (2.60 g, 8.76 mmol) was added, and washed thoroughly with NMP (1.8 ml). After the internal temperature became 115 degrees C again, sodium t-butoxide (505 mg, 5.26 mmol) and trimethylsulfoxonium bromide (2.2379 g, 1.476 mmol) were added in portions over about 3 hours. After completion of the addition, stirring was conducted at the same temperature for 75 minutes. The reaction solution was cooled to 35 degrees C, and then, to the reaction solution, water was added and extraction with ethyl acetate was conducted. The organic layer was washed with water and saturated brine, and dried over anhydrous sodium sulfate. The solvent was distilled away and the residue was subjected to silica gel column chromatography (eluent; hexane:ethyl acetate =3:1 to 0:1) for purification to obtain the desired substance. Product: 2.36 gYield: 71 %Description: Colorless viscous oil

In the meantime we’ve collected together some recent articles in this area about 41253-21-8 to whet your appetite. Happy reading!

Reference:
Patent; KUREHA CORPORATION; ARAKI, Nobuyuki; YAMAZAKI, Toru; KUSANO, Nobuyuki; IMAI, Eiyu; KANNO, Hisashi; MORI, Masaru; MIYAKE, Taiji; WO2011/70771; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-36-8, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a mixture of 2-bromo-4-fluorobenzoic acid (30 g, 137 mmol) , cesium carbonate (89.26 g, 274 mmol) , and CuI (5.27 g, 27.4 mmol) in DMF (200 mL) was added N, N? -dimethylcyclohexane-1, 2-diamine (3.7 mL, 23.3 mmol) and 1H-1, 2, 3-triazole (18.92 g, 274 mmol) . The resulting mixture was stirred at 110 overnight, cooled, concentrated in vacuo, and diluted with water (150 mL) . The aqueous layer was washed with EtOAc (300 mL x 3) . The aqueous layer was acidified with 2 N HCl and extracted with EtOAc (300 mL x 4) . The combined organic layers were washed with brine (150 mL x 3) , dried over Na2SO4, filtered, and concentrated in vacuo. The residue was purified by silica gel column chromatography (petroleum ether: EtOAc100: 15: 1) to provide the title compound as a solid. LRMS m/z (M+H) 208.0 found, 208.0 required.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,3-Triazole.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott D.; LIVERTON, Nigel; LUO, Yunfu; (59 pag.)WO2016/101118; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 2-bromo-3-thiophene carboxylic acid (1.50 g, 7.24 mmol), 1H-1 ,2,3- triazole (0.600 g, 8.69 mmol), potassium carbonate (2.00 g, 14.5 mmol), and copper iodide (0.138 g, 0.724 mmol) in DMF (36.2 mL) was purged subsurface with nitrogen and heated to 75 C for 4 nights. The reaction was diluted with water, washed with ether, and acidified with cone. HC1. The acidic aqueous solution was extracted 3x with ethyl acetate and the combined organic fractions were washed with brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified by silica gel gradient chromatography [0-70% (1% acetic acid in ethyl acetate) in hexanes], providing the title compound as an off-white solid. LRMS m/z (M+H) 196.2 found, 196.1 required.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,3-Triazole.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; SKUDLAREK, Jason, W.; WO2015/95442; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

But-3-yn-1-ol (49.57 g, 707.2 mmol) and triethylamine (107.7 mL, 777 mmol, dried over KOH) were dissolved in dry dichloromethane (500 mL) under a nitrogen atmosphere and cooled to 0 C. Methanesulfonyl chloride (54.8 mL, 708 mmol), dissolved in 500 mL of dry dichloromethane was added within 90 minutes while keeping the temperature below 5 C. The mixture was stirred for 3.5 hours at room temperature, then poured onto 2.5 L of ice water. The organic phase was separated and washed with 2×500 mL of water and 1×250 mL of brine and dried over sodium sulfate. The volatiles were removed to yield 94.18 g of the methane sulfonate (631.2 mmol, 89.2%) as a yellow liquid. A suspension of NaOH (37.86 g, 946.5 mmol), sodium iodide (94.65 g, 631.5 mmol) and 1H-[1,2,3]Triazole (61.03 g, 883.6 mmol) in 2-methyl-2-butanol (750 mL) was refluxed for 1 h under an inert atmosphere. After cooling to room temperature the methane sulfonate (94.18 g, 631.2 mmol) was added within 5 minutes. The resulting suspension was then heated to reflux for 3 hours, cooled to room temperature and concentrated on a rotary evaporator at 45 C. Water (500 mL) and dichloromethane (1 L) were added and the organic phase was separated, dried over sodium sulfate and the volatiles removed at 30 C. The residue was distilled at 1.5 mbar. A forerun was collected at 20-70 C. The main fraction distilled at 123-129 C. as a colorless, turbid liquid. After filtration over Celite (a pad of diatomite) 1-But-3-ynyl-1H-[1,2,3]triazole was obtained as a colorless liquid (29.8 g, 40%). The content according to GC/FID was >98%. -H-NMR (CDCl3) delta=2.05 (t, 1H, C?CH), 2.75 (dt, 2H, CH2-C?CH), 4.5 (t, 2H, CH2-triazole), 7.65 (s, 1H, triazole), 7.70 (s, 1H, triazole).

If you are hungry for even more, make sure to check my other article about 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Bossenmaier, Birgit; Friebe, Walter-Gunar; Friess, Thomas; Kling, Lothar; Rueth, Matthias; Voss, Edgar; US2005/203064; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 584-13-4, name is 4H-1,2,4-Triazol-4-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 584-13-4

12.78 grams of sodium hypochlorite solution (36mM available chlorine) was dissolved inthe solution formed by mixing 5 mL glacial acetic acid with 30 mL of deionized water and the solution was cooled to 7 C. To this was added 1.5 g (18 mM) 4-amino-1,2,4-triazole dissolved in 15 mL deionized water. The solution was stirred at 7 C for 4 h followed by standing the final solution two days at room temperature. Yellow and oblong crystal of atrz (Supplemental data, figure S1) was obtained in 75% yield (scheme 1). This is very good for the synthesis of atrz, because the separation of the product, we know, always is the most difficult step during the whole synthetic experiment. In addition, sodium chloride, totally environment friendly, will only be left after atrz is separated from the final solution. Caution: The light, which makes sodium hypochlorite turn into sodium chloride and oxygen, must be obstructed during the whole reaction. Temperature is also very important to the yield of atrz because sodium hypochlorite is very unstable at high temperature (>25 C).Anal. Calcd for C4N8H4: C, 29.24; N, 68.32; H, 2.44. Found: C, 28.93; N, 68.36; H, 2.49. IR(cm-1) = 3111(s), 1489(s), 1368(s), 1315(m), 1176(s).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 584-13-4

Reference:
Article; Li; Wu; Qiu; Zhang; Yang; Journal of Coordination Chemistry; vol. 67; 11; (2014); p. 2016 – 2027;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7170-01-6, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: TBHP (3 eq.) was added to a solution of 3-phenyl-1,2,4-triazole (0.4 mmol) 1a, benzaldehyde 2a (0.6 mmol), followed by TBAI (20 mol%) in DCE(4 mL). The reaction mixture was stirred at 120 oC under nitrogen atmosphere for 5 h. After completion of the reaction confirmed by TLC, the reaction mixture was cooled to room temperature and partitioned between water and ethyl acetate. The organic and aqueous layers were then separated and aqueous layer was extracted with ethyl acetate twice. The combined organic extracts were dried over anhydrous Na2SO4 and concentrated under reduced pressure to afford the crude. The crude was further purified by silica gel chromatography using EtOAc/hexane as eluents to furnish the desired product 3 or 5.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 3-Methyl-1H-1,2,4-triazole.

Reference:
Article; Agisho, Habtamu Abebe; Esatu, Habdolo; Hairat, Suboot; Zaki, Mehvash; Tetrahedron Letters; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-65-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a flask containing 1-methyl-1H-1,2,3-triazole (275 mg, 3.31 mmol) was added THF (10 mL) and the solution was cooled to -45 C. using a CH3CN-CO2 bath. n-BuLi (2.5 M in hexanes, 1.4 mL, 3.5 mmol) was added dropwise which afforded an opaque white suspension. The mixture was stirred at -43 C. for 20 minutes, then a homogeneous solution of (4-chloro-3-isobutyl-2-methoxyquinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (550 mg, 1.48 mmol, Intermediate 65) in 3 mL THF was introduced. After 10 minutes, the reaction flask was then placed in an ice-water bath. The reaction mixture was quenched after 30 minutes with aqueous NH4Cl solution and the aqueous portion was extracted with EtOAc (4*30 mL) and EtOAc:THF (1:1, 30 mL). The combined organics were washed with brine, dried over MgSO4, filtered and concentrated. Chromatography on silica gel (5% MeOH-DCM increasing to 10% MeOH-DCM) provided the title compound as a tan amorphous solid. 1H NMR (400 MHz, CD3OD) delta 8.19 (d, J=2.1 Hz, 1H), 7.85 (d, J=8.7 Hz, 1H), 7.52 (dd, J=8.7, 2.2 Hz, 1H), 7.17 (s, 1H), 6.11 (s, 1H), 4.09 (s, 3H), 3.98 (s, 3H), 3.47 (s, 3H), 2.85 (d, J=7.3 Hz, 2H), 2.37 (s, 3H), 2.11 (hept, J=6.9 Hz, 1H), 0.96 (d, J=6.6 Hz, 6H). MS (ESI): mass calcd. for C23H27ClN6O2, 454.2. m/z found 455.0 [M+H]+. The racemate was separated by chiral SFC (Stationary phase: CHIRALPAK AD-H 5 mum, 250×30 mm, Mobile phase: 70% CO2, 30% mixture of MeOH/iPrOH 50/50 v/v (+0.3% iPrNH2)), to give Example 134b as the first compound that eluted from the chiral column and Example 134c as the second compound that eluted from the chiral column.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-Methyl-1H-1,2,3-triazole is helpful to your research.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-36-8, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Intermediate 14f (0556) 4,5-Dibromo-lH-triazole (0557) Br2 (930 g, 5.82 mol) was added dropwise to a stirred solution of lH-triazole (300.00 g, 4.34 mol, 252.10 mL) in H20 (2 L) at 40 to 45 °C. The resulting solution was stirred for a further 1 hour. The precipitate was filtered off and further Br2 (617.28 g, 3.86 mol) was added to the filtrate, then it was kept at 25 °C for 16 hours. A second precipitate was filtered off. The combined filtered off solids were washed with water (1 L x 3), dried under vacuum and re-crystallized from MeOH (-400 mL) to give 4,5-dibromo-lH-triazole (Intermediate 14f; 890 g, 90.39percent yield) as an off-white solid, m/z (ES+) [M+H]+ (0558) 226/228/230.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1H-1,2,3-Triazole is helpful to your research.

Reference:
Patent; ASTRAZENECA AB; WARD, Richard, Andrew; JONES, Clifford, David; FERON, James, Lyman; (80 pag.)WO2017/80980; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

To a mixture of the product from step 2 (7.9 g, 38 mmol), cesium carbonate (24.8 g,76 mmol) and Cul (2.88 g, 7.6 mmol) in DMF (200 mL) were added 2H-[1,2,3]triazole (5.24 g,76 mmol) and N,N’-dimethyl-cyclohexane-l12-diamine (0.9 g, 6.5 mmol) and the mixture was heated to 110C overnight. The cooled reaction mixture was adjusted to ~pH 12 with 1M sodium hydroxide and extracted with EtOAc (50 mL x 3). The aqueous layer was adjusted to ~pH 4 with 1M HCl and extracted with EtOAc (50 mLx4). The extracts was dried over Na2SO4, filtered, the filtrate concentrated in vacuo and the residue purified by chromatography on silica (petroleum ether : EtOAc =10:1) to provide the title compound. LRMS m/z (M+H) 196.0 found, 196.0 required.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 288-36-8

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; BESHORE, Douglas C.; KUDUK, Scott D.; LUO, Yunfu; MENG, Na; YU, Tingting; WO2015/18027; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics