Tag: M.W=0-100

Application of 288-36-8, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The molar ratio of 9,10-dibromoanthracene: 1H-1,2,4-triazole: potassium carbonate: copper oxide is 2: 10-15: 30: 1In the magnet,A 50 mL three-necked round bottom flask equipped with a reflux condenser and a thermometer was charged with CuO (0.0398 mg, 0.5 mmol)Potassium carbonate (2.0731 g, 15 mmol),Triazole (0.345 mg, 5 mmol),9,10-dibromoanthracene (0.3360 g, 1 mmol),20 mL DMF.Start stirring at 100 oC,Reaction for 24 hours.After the reaction,The reaction solution was cooled to room temperature,Filtration, the filtrate was added 100 mL of water,Precipitation precipitation, filtration,The filter cake was collected in a yield of 60%.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 288-36-8, Happy reading!

Reference:
Patent; Tianjin Normal University; Wang Zhongliang; Yang Xi; Guo Changcheng; Shang Yuntao; Zhang Zhigang; Wang Ying; (11 pag.)CN106188104; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 60166-43-0, name is 1,4-Dimethyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 60166-43-0

Under the protection of N2, a tetrahydrofuran (5.0 mL) solution of 1,4-dimethyl-1,2,3-triazole (0.56 g, 5.77 mol) was added dropwise to a tetrahydrofuran (5.0 mL) solution of butyllithium (2.77mL, 6.27 mol, 2.4 mol/L n-hexane solution) at -78C, and the resulting mixture was kept at -70C and reacted for 1h. Then chlorotributyltin (1.71 mL, 6.34 mol) was added. The system became clear, and was gradually warmed to room temperature. Water and ethyl acetate were added to the reaction flask, stirred for 15 min, and filtered through Celite filler, and the Celite filler was rinsed with ethyl acetate. After the filtrate was layered, the aqueous phase was extracted with ethyl acetate once. The ethyl acetate phases were combined, washed with a saturated sodium chloride aqueous solution, dried with anhydrous sodium sulfate, and concentrated to obtain a black residue. The residue was purified by silica gel column chromatography eluting with ethyl acetate/petroleum ether (5:1) to obtain a luminous yellow oily product (1.40g, 63%). 1H NMR (400 MHz, CDCl3) delta 4.03 (s, 3H), 2.35 (s, 3H), 1.45-1.54 (m, 6H), 1.28-1.40 (m, 6H), 1.16-1.21 (m, 6H), 0.91 (t, 9H).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 60166-43-0.

Reference:
Patent; Chia Tai Tianqing Pharmaceutical Group Co.,Ltd; Centaurus BioPharma Co., Ltd.; Lianyungang Runzhong Pharmaceutical Co., Ltd.; LI, Jijun; WU, Wei; ZHU, Yan; WANG, Huting; ZHAO, Lijia; HE, Weinan; SUN, Yinghui; PENG, Yong; HAN, Yongxin; (108 pag.)EP3412669; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step 3: 4-(2H-1.2.3-Triazol-2-yl)thiophene-3-carboxylic acid (Intermediate F) To a mixture of the product from step 2 (7.9 g, 38 mmol), cesium carbonate (24.8 g,76 mmol) and Cul (2.88 g, 7.6 mmol) in DMF (200 mL) were added 2H-[l,2,3]triazole (5.24 g,76 mmol) and N,N’-dimethyl-cyclohexane-l,2-diamine (0.9 g, 6.5 mmol) and the mixture was heated to 110 C overnight. The cooled reaction mixture was adjusted to ~pH=12 with 1M sodium hydroxide aqueous solution and extracted with EtOAc (50 mL x 3). The aqueous layer was adjusted to ~pH=4 with 1M HC1 aqueous solution and extracted with EtOAc (50 mLx4). The extracts was dried over Na2SC>4, filtered. The filtrate was concentrated in vacuo and the residue was purified by chromatography on silica (petroleum ether : EtOAc =10: 1) to provide the title compound. LRMS m/z (M+H) 196.0 found, 196.0 required.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,3-Triazole, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KIM, Ronald; KUDUK, Scott, D.; LIVERTON, Nigel; ZHUO, Gang; (116 pag.)WO2016/100161; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 16681-65-5, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

1-Methyl-1H-1,2,3-triazole was prepared according to the literature reference WO2008/98104. To a 2 L flask containing 1-methyl-1H-1,2,3-triazole (9 g, 108.3 mmol) was added THF (1500 mL) and the solution was cooled to -40 C. To this colorless homogeneous solution was added n-butyllithium (2.5 M in hexanes, 45 mL, 112.5 mmol) dropwise which immediately afforded a dark brown viscous mixture. The mixture was kept between -10 to -20 C. for 60 minutes, then a THF solution of 2,4-dimethylthiazole-5-carbaldehyde (17.2 g, 121.8 mmol in 200 mL THF) was introduced via cannula. Once the aldehyde was added the reaction was allowed to warm to room temperature. After 3 hours, the reaction was quenched by pouring it into a saturated solution of aqueous NH4Cl. The aqueous portion was extracted with EtOAc in portions, 7*400 mL. The combined organics were washed with brine, dried over MgSO4, filtered and concentrated to dryness to give a brown oil. Chromatography on silica gel (10% acetone-DCM increasing to 50% acetone and increasing to 10% MeOH-DCM) provided the title compound as an amber solid.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-Methyl-1H-1,2,3-triazole is helpful to your research.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 930-33-6, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 930-33-6, name is 1H-1,2,4-Triazol-3(2H)-one, molecular formula is C2H3N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

EXAMPLE 5 3-[6-Bromo-2-fluoro-3-(5-oxo-1,5-dihydro-[1,2,4]triazol-4-ylmethyl)-phenoxy]-5-chloro-benzonitrile (I-8) Ar=3-chloro-5-cyano-phenyl A solution of A-2d (200 mg, 0.477 mmol), 2,4-dihydro-[1,2,4]triazol-3-one (10, CASRN 930-33-6, 0.040 g, 1.0 eq), K2CO3 (0.13 g, 2.0 eq), and KI (0.008 g, 0.1 eq) and MeCN (1.5 mL) was heated to 85 C. for 2 h and then cooled to RT. The reaction mixture was diluted with 10% MeOH/DCM, and washed sequentially with water and brine. The organic extracts were evaporated and the crude product purified by SiO2 chromatography eluding with a MeOH/DCM gradient (3-10% MeOH) to afford 0.020 g (10%) of 1-8 as a white solid.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,4-Triazol-3(2H)-one.

Reference:
Patent; Roche Palo Alto LLC; US2009/12034; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

Sodium hydride (5.3 g, 220.85 mmol, 1.50 equiv) was added in portions to a stirred mixture of1H-1,2,3-triazole (10 g, 144.79 mmol, 1.00 equiv) in THF (500 mL) at 0 C under nitrogen. After1 hour 2-(trimethylsilyl)ethoxymethyl chloride (36 g, 235.76 mmol, 1.60 equiv) was added and theresulting solution was stirred for 12 h at room temperature. The reaction was quenched by water, extracted with ethyl acetate, dried over anhydrous sodium sulfate, and concentrated under vacuum. The residue was applied onto a silica gel column with ethyl acetate/petroleum ether (1:10). This resulted in 10 g (28%) of the title compound as yellow oil. LC-MS (ES, mlz): 200 [M+H].

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 288-36-8, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; BLAQUIERE, Nicole; BURCH, Jason; CASTANEDO, Georgette; FENG, Jianwen A.; HU, Baihua; STABEN, Steven; WU, Guosheng; YUEN, Po-wai; WO2015/25025; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C2H3N3

In the reactor,Add 250mL of acetone,Stirring,26.2 g of 2-iodo-5-methylbenzoic acid,Then 34.5 g of potassium carbonate was added,0.38 g copper iodide (Cul),1,2,3-triazole 7.6g.External temperature was raised to 70 C,During the heating process, a large amount of gas is generated,The reaction was refluxed for 5 hours.Then the reaction mixture was distilled under reduced pressure, the reaction system is more viscous, add 30mL of water, continue to reduce the steam distillation to no acetone (no acetone gas phase). 300mL of water was added to the residue after distillation, and 6mo 1 / L hydrochloric acid was added dropwise at room temperature to adjust the pH of the system to 1-2, resulting in a khaki-colored suspension liquid. Stirred for 15 minutes, filtered, washed with water three times,Each 50mL. The resulting solid was dried at 70 C in vacuo to dryness,Have pale green solid 19.45g,For crude compound (1-1), the purity was 95.20%.With stirring, 7.5 kg of acetone, 0.94 kg of crude compound (1-1) and 0.194 kg of sodium hydroxide were added to the reaction kettle. Stirred at 20 C-30 C for 14 hours. Centrifugation, The filter cake was washed 3 times with acetone, each time 3kg. The resulting solid was transferred to the reaction kettle , 5.65 kg of water was added, 0.14 kg of diatomaceous earth was added and stirred for 1 hour. Filtration, the filtrate was transferred to the reaction kettle, hydrochloric acid was added dropwise to adjust the pH to 1-2, a large amount of white solid formed and stirred for 1 hour. Filtered, the filter cake was washed with water three times, each time 3kg. The resulting solid was dried at 60 C in vacuo to dryness, 0.71 kg white solid, represents Compound (I-1), purity 99.97%, Isomeric compound (1-2) less than 0.1%.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-1,2,3-Triazole ,and how the biochemistry of the body works.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; He Bifei; Fan Yuping; (6 pag.)CN104649983; (2018); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 61-82-5

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 61-82-5.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a stirred solution of EE-1 (10 g, 144.79 mmol) in water (100 mL) is added EE-2 (13.73 g, 173.75 mmol) dropwise at 0 C and the reaction mixture is stirred at 0 C for 7 hours. The reaction mixture is filtered and extracted with diethyl ether. The combined organics are concentrated in vacuo to yield EE-3.

In the meantime we’ve collected together some recent articles in this area about 1H-1,2,3-Triazole to whet your appetite. Happy reading!

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; HUGHES, Robert Owen; LI, Xiang; NEMOTO, Peter Allen; SMITH KEENAN, Lana Louise; WU, Lifen; XIONG, Zhaoming; (65 pag.)WO2018/111803; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 41253-21-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

in a 2000 L finished synthesis kettle, 138 kg of sodium triazole sodium salt was dissolved in 15 kg of formamide. Adding N,N-dimethylformamide mother liquor, slowly raising the temperature to 80 C at a rate of 55 C / h, and reacting at 80 C for 8 hours, Then, N,N-dimethylformamide was recovered under a vacuum of -0.085 MPa for 2.7 hours. After the completion of the collection, the mixture is transferred to a high-vacuum distillation still for fractional distillation, and the mixture is fractionated under a vacuum of 1.33 kPa and a temperature of 227 C for 8 hours, and cooled to room temperature to obtain a fluorosilazole; wherein, the formula of the specific alkylation reaction is as follows: Formula (3).

In the meantime we’ve collected together some recent articles in this area about 41253-21-8 to whet your appetite. Happy reading!

Reference:
Patent; Shanxi Hengrun Chemical Co., Ltd.; Fan Ming; Li Cangzhen; Chen Dunguo; Chao Liumin; Wang Jianqiao; Yin Weixin; (7 pag.)CN108864165; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics