Tag: M.W=0-100

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C3H5N3

DMF (1.5 ml) was added to a mixture of methyl 3-iodo-6-methyl-2-pyridinecarboxylate D44 (100 mg), 3-methyl-1H-1,2,4-triazole (45.0 mg, 0.541 mmol), (1R,2R)-N,N’-dimethyl-1,2-cyclohexanediamine (10.27 mg, 0.072 mmol), copper(I) trifluoromethanesulfonate benzene complex (9.08 mg, 0.018 mmol) and cesium carbonate (235 mg, 0.722 mmol) in a screw-topped vial. The mixture was degassed via 3 vacuum/nitrogen cycles and heated with shaking to 120 C. for 90 minutes. The reaction mixture was evaporated to dryness under reduced pressure. The residue was dissolved in water/MeOH (1:1, 3 ml) and acidified to pH=2 by addition of 2 M HCl solution. The resulting mixture was evaporated to dryness under reduced pressure then the residue was triturated with DCM/MeOH (3:1, 5 ml). The mixture was filtered washing with more DCM/MeOH (3:1, 5 ml). The filtrate was treated with trimethylsilyldiazomethane solution (2 M in hexanes, 2 ml, 4 mmol) to re-esterify the acid. The reaction mixture was evaporated under reduced pressure and the residue was purified by flash chromatography on silica gel (Biotage Snap 2×10 g columns in series, EtOAc/Cy from 50/50 to 100/0) to give the title compound D84 (48 mg) as a colourless solid. UPLC (Acid FINAL_QC_POS): rt=0.45 minutes, peak observed: 233 (M+1). C11H12N4O2 requires 232. 1H NMR (400 MHz, CDCl3) delta ppm 2.52 (s, 3H) 2.73 (s, 3H) 3.91 (s, 3H) 7.47 (d, 1H) 7.81 (d, 1H) 8.32 (s, 1H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3-Methyl-1H-1,2,4-triazole, in my other articles.

Reference:
Patent; ALVARO, Giuseppe; Amantini, David; Castiglioni, Emiliano; Di Fabio, Romano; Pavone, Francesca; US2010/144760; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

In the reactor,Add 90% acetone (volume fraction) 400mL,Stirring,26.2 g of compound (01)Then 34.5 g of potassium carbonate powder was added,0.38 g copper iodide (CuI),1,2,3-triazole.External temperature was raised to 70 ,During the heating process, a large amount of gas is generated,The reaction was stirred at reflux for 5 hours.The reaction mixture was then distilled under reduced pressure at 40 C,When the reaction system is more viscous, add 45mL of water and continue to reduce the steam to distillate without acetone (no acetone in the gas phase). Distilled residue was added 300mL of water, 25% sulfuric acid was added dropwise at room temperature to adjust the pH to 1-2, a yellow suspension.Stir for 30 minutes, filter, and the solids are washed three times with water, 60 mL each. The resulting solid was dried to dryness at 70 C in vacuo,Have pale green solid 19.48g,Compound (1), purity 95.06%.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 288-36-8, Happy reading!

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; He Bifei; Liu Guangyuan; Fan Yuping; (6 pag.)CN104557744; (2017); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 584-13-4, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 4H-1,2,4-Triazol-4-amine.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 41253-21-8, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of Intermediate 1d (12 mmol) in DMF (75 mL) was added the sodium salt of 1,2,4-triazole (5.5 g, 60 mmol). The resultant suspension was heated at 100-110 C. for 40 hr. After cooling the reaction mixture was poured into water (200 mL) and extracted with EtOAc (2200 mL). The combined extracts were washed with brine, dried over Na2SO4 and evaporated to afford a clear colorless oil. Chromatography through silica eluting with 2:3 hexanes/EtOAc furnished the BOC-protected amine as a clear colourless oil.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about Sodium 1,2,4-triazol-1-ide.

Reference:
Patent; Merck & Co., Inc.; US6350760; (2002); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a 50 mL round-bottomed flask equipped with a magnetic stirbar was added 1-H-l, 2. 3-triazole (0.192 g. 2.78 mmol) and DMF (10 mL) and then cooled to O0C while stirring. Then. sodium hydride (60% dispersion in mineral oil) (0.133 g. 3.33 mmol) is added to the reaction mixture and was slowly allowed to warm to ambient temperature. Then, l-iodo-4 pentyne (0.647 g, 3.33 mmol) was added dropwise. The reaction mixture was then heated to 800C and allowed to stir for 2.5 hours. Water (20 mL) was then added to the reaction mixture and then extracted with ethyl acetate (2 x 20 mL). The organic phase was dried with sodium sulfate and concentrated de vacuo followed by a purification by column chromatography (ethyl acetate/hexane) to produce l-Pent-4-ynyl-lH-[1.2.3]triazole (0.349 g. 93%) as a colorless oil. iH NMR (300 MHz, CDCb) delta 7.67 (s, IH). delta 7.59 (s. IH). delta 4.53 (t. 2H). delta 2.20 (t, 2H). delta 2.17 (m. 2H), delta 2.04 (s, IH) ppm: ?C NMR (75 MHz. CDCb) delta 133.9. 123.9. 82.2, 70.4. 48.7, 28.9. 15.7 ppm: HRMS (ESI) calcd for C7H10N3 (M-) 136.0869, found 136.0866

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,3-Triazole.

Reference:
Patent; NORTH CAROLINA STATE UNIVERSITY; MELANDER, Christian; CAVANAGH, John; RITCHIE, David, F.; ROGERS, Steven, A.; HUIGENS, III, Robert, W.; WO2010/77603; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-88-0, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 91: Preparation of 4-(lH-l,2,4-triazol-l-yl)benzaldehyde (DI5) To a stirring solution of 4-fluorobenzaldehyde (10.0 g, 80.6 mmol) in DMF (150 mL) were added K2CO3 (13.3 g, 96.7 mmol) and 1,2,4- triazole (6.67 g, 96.7 mmol) and the resultant reaction mixture was stirred at 120 C for 6 h. After completion of reaction (by TLC), the reaction mixture was diluted with H20 and extracted with EtOAc (3 xlOO mL). The combined EtOAc layer was washed with H20 and brine, dried over Na2S04, and concentrated under reduced pressure to afford the title compound as a solid (9.0 g, 65%): mp 145-149 C: ]H NMR (400 MHz, CDC13) delta 10.08 (s, IH), 8.70 (s, IH), 8.16 (s, IH), 8.06 (d, J = 8.0 Hz, 2H), 7.92 (d, J = 8.0 Hz, 2H); ESIMS m/z 173.9 ([M+H]+).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,4-Triazole, hurry up and to see.

Reference:
Patent; DOW AGROSCIENCES LLC; LO, William C.; HUNTER, James E.; WATSON, Gerald B.; PATNY, Akshay; IYER, Pravin S.; BORUWA, Joshodeep; WO2014/100163; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

1,2,3-Triazole (3.45 g, 50 mmol),2-iodo-5-methylbenzoic acid (5.24 g, 20 mmol),Cesium carbonate (11.72 g, 36 mmol),Trans-N, N’-dimethyl-1,2-cyclohexanediamine (0.51 g, 3.6 mmol),Cuprous iodide (0.38 g, 2 mmol),N, N-dimethylformamide (30 mL) were sequentially added into a 100 mL single-necked round bottom flask, and the mixture was gradually heated to 100 C. under a nitrogen atmosphere for reaction for 4 hours. The reaction was stopped, cooled, diluted with tap water and extracted with ethyl acetate (200 mL x 2). The aqueous layer was acidified with concentrated hydrochloric acid (pH = 1-2) and extracted with ethyl acetate (200 mL x 2). The combined organic layers were combined and dried over anhydrous sodium sulfate and filtered. The filtrate was evaporated to dryness under reduced pressure and subjected to column chromatography Purification (dichloromethane / methanol (v / v) = 50/1) afforded the title compound (yellow solid, 2.76 g, 68%).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,3-Triazole, in my other articles.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Xu Juan; Zhong Wenhe; Zhang Yingjun; Liu Qi; (35 pag.)CN105949203; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 7343-34-2

General procedure: The example reported for derivatives 22/23 find general application for all the other N-linked heterocycles. Sodium hydride 60percent dispersed in mineral oil was added at 0 °C to a solution of 3-(trifluoromethyl)-1H-pyrazole in dry DMF. The mixture was stirred at this temperature for 15 min, then for an additional 5 min at room temperature. A solution of derivative 45 in dry DMF (2 ml) was then added and the mixture was stirred at 50 °C for 3 h 30 min. After cooling to RT, a saturated NH4Cl solution was added and the mixture was extracted with Et2O (2.x.). The organic phase was washed with brine, dried over Na2SO4 and concentrated in vacuo. The residue was purified by Silica gel flash chromatography (gradient ethyl acetate in cyclohexane from 5 to 40percent) to give the intermediate BOC protected compound 22 and the intermediate BOC protected compound 23.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 7343-34-2, and we look forward to future research findings.

Reference:
Article; Micheli, Fabrizio; Cavanni, Paolo; Bettati, Michela; Bonanomi, Giorgio; Di Fabio, Romano; Fazzolari, Elettra; Marchioro, Carla; Roscic, Maja; Tarsi, Luca; Visentini, Filippo; Zonzini, Laura; Worby, Angela; Bioorganic and Medicinal Chemistry; vol. 19; 11; (2011); p. 3451 – 3461;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-36-8, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of 1H-1,2,3-triazole (0.524 mL, 9.05 mmol) in water (5 mL) at 50 C was added bromine (0.625 mL, 12.13 mmol). The reaction was stirred at 50 C for 90 minutes, whereupon the precipitated product was filtered off. This material was air-dried on the filter. Another aliquot of bromine (0.625 mL, 12.13 mmol) was added to the mother liquor, which was stirred at room temperature overnight. After stirring overnight, collected the solid product by filtration. Filtered off a total of 4,5-dibromo-1H-1,2,3-triazole (1.83 g, 7.91 mmol, 87 % yield) as a white solid. Carried on as-is to alkylation.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,3-Triazole.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; SPERGEL, Steven H.; PITTS, William J.; MERTZMAN, Michael E.; MOSLIN, Ryan M.; SHERWOOD, Trevor C.; GILMORE, John L.; DYCKMAN, Alaric J.; (0 pag.)WO2020/92196; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 3-Methyl-1H-1,2,4-triazole

To a stiffing solution of 4-fluorobenzaldehyde (5.0 g, 40.32 mmol) in DMF (50 mL), were added K2CO3 (3.34 g, 40.32 mmol) and 3-methyl-1,2,4-trizole (3.34 g, 40.32 mmol) and the resultant reaction mixture was stirred at RT for 4 h. After completion of the reaction (TLC), the reaction mixture was diluted with water and extracted with EtOAc (3*). The combined EtOAc layer was washed with water and brine then dried over Na2SO4 and concentrated under reduced pressure to afforded the title compound as a white solid (4.1 g, 60%): mp 125-128 C.; 1H NMR (400 MHz, CDCl3) delta 10.05 (s, 1H), 8.76 (s, 1H), 8.02 (d, 2H), 7.85 (d, 2H), 2.50 (s, 3H); ESIMS m/z 188.04 ([M+H]+).

If you are hungry for even more, make sure to check my other article about 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171312; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics