Tag: M.W=0-100

Electric Literature of 41253-21-8, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: 2-Chloro-N-(6-alkoxybenzo[d]thiazol-2-yl)acetamide (5 mmol) and sodium 1,2,4-triazole (6 mmol)were dissolved in N,N-dimethylformamide (10 mL) and stirred for 10 h at room temperature. Half of thesolvent was then evaporated, the solution was poured in 50 mL water, and extracted with ethyl acetate(30 mL 3). The ethyl acetate layer was dried over anhydrous MgSO4. After removing the solventunder reduced pressure, the crude product was obtained and recrystallized from dichloromethane toyield a white solid.

This is the end of this tutorial post, and I hope it has helped your research about 41253-21-8!

Reference:
Article; Liu, Da-Chuan; Zhang, Hong-Jian; Jin, Chun-Mei; Quan, Zhe-Shan; Molecules; vol. 21; 2; (2016);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7170-01-6, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a 50 mL dried two-neck flask were added 3-methyl-1H-1,2,4-triazole (650 mg, 7.8 mmol), 1-fluoro-4-nitrobenzene (1.0 g, 7.1 mmol) and potassium carbonate (2.0 g, 14 mmol), then DMF (10 mL) was added. The mixture was stirred at 80 C for 1 h under nitrogen protection. The mixture was cooled to rt and filtered. The filter cake was washed with DCM (20 mL), and the filtrate was concentrated in vacuo. To the residue was added water (20 mL). The mixture was stirred for 10 min and then a light yellow solid precipited out. The mixture was filtered by suction, and the filter cake was dried to give a light yellow solid (0.7 g, 48%). MS (ESI, pos.ion) m/z:205.1 (M+1)

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3-Methyl-1H-1,2,4-triazole.

Reference:
Patent; Sunshine Lake Pharma Co., Ltd.; WANG, Xiaojun; ZHOU, Pingjian; YANG, Chuanwen; HUANG, Changwei; XIONG, Shaohui; ZHANG, Yingjun; ZHANG, Jiancun; (139 pag.)EP3342765; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 1455-77-2, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, molecular formula is C2H5N5, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

3,5-Diamino-1,2,4-triazole (151.7 mg, 1.5 mmol) in ethanol(10 mL) was added to a solution containing 2-hydroxy-1-naphthalehyde (298.7 mg, 1.7 mmol) in ethanol (10 mL).The reaction mixture was stirred for 1 d, until the yellow precipitate appeared. The precipitate was filtered and washed with ether (10 mL×2) and ethanol (10 mL). The yield was 69 percent (262.1 mg). 1H NMR (400 MHz, DMSO-d6, ppm) delta12.13 (s, 1H), 9.84 (s, 1H), 8.21 (d, J=8.7 Hz, 1H), 8.00 (d,J=9.2 Hz, 1H), 7.87 (d, J=8.1 Hz, 1H), 7.60 (t, J=7.7 Hz,1H), 7.41 (t, J=7.5 Hz, 1H), 7.13 (d, J=9.1 Hz, 1H), 6.30 (s,2H); 13C NMR (100 MHz, DMSO-d6, ppm): 166.36 (1C),160.37 (1C), 157.71 (1C), 157.30 (1C), 136.61 (1C), 133.02(1C), 129.66 (1C), 128.89 (1C), 127.64 (1C), 124.18 (1C),120.89 (1C), 120.03 (1C), 108.95 (1C). LRMS (ESI): m/zcalcd for C13H10N5O: 252.089 ([M-H+]); found, 252.267.Anal. calcd for C13H11N5O (249.273): C, 61.65; H, 4.38; N,27.65; found: C, 61.75; H, 4.39; N, 27.93.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3,5-Diamino-1,2,4-triazole.

Reference:
Article; Lee, Jae Jun; Lee, Sun Young; Bok, Kwon Hee; Kim, Cheal; Journal of Fluorescence; vol. 25; 5; (2015); p. 1449 – 1459;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7170-01-6, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

200 mg of intermediate 35, 60% sodium hydride(Oil) 30 mg, and DMF 2 mL,47 mg of 3-methyl-1H-1,2,4-triazole was added under ice cooling. After stirring for 2.5 hours under ice cooling,Saturated multilayer aqueous solution was added to the reaction mixture,And extracted with ethyl acetate. The organic layer was washed with water,And saturated brine, and dried over anhydrous sodium sulfate. The obtained organic layer was dried under reduced pressure.The obtained residue was subjected to silica gel chromatography,120 mg of Compound 247 of the present invention described below was obtained.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 3-Methyl-1H-1,2,4-triazole, hurry up and to see.

Reference:
Patent; Sumitomo Chemical; Ikari, Kaori; (123 pag.)JP2019/6686; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 61-82-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 61-82-5, Happy reading!

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7170-01-6, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A mixture of 3-methyl-lH-l,2,4-triazole (15.0 g, 181 mmol), 1,2- difluoro-4-nitrobenzene (28.7 g, 181 mmol), and sodium bicarbonate (15.2 g, 181 mmol) in DMSO (100 mL) was heated at 80 0C for 48 h . The reaction mixture was allowed to cool to rt and was poured into water (800 mL). The aqueous mixture was extracted with EtOAc (3 x 200 mL). The combined organic extracts were sequentially washed with water (500 mL) and brine solution (100 mL). The organic layer was dried over sodium sulfate, filtered, and concentrated in vacuo. The crude reaction mixture was purified using silica gel chromatography (30-80% EtOAc/hexane, linear gradient) to afford two regioisomeric products. Pure fractions of the less polar regioisomer were combined and concentrated to afford l-(2-fluoro- 4-nitrophenyI)-3-methyl-lH-l,2>;4-triazole (7.2 g, 30.8 mmol, 17 % yield) as an off- white solid. Pure fractions of the more polar regioisomer were combined and concentrated to afford l-(2~fluoro-4-nitrophenyl)-5-methyl-lH-l52,4-triazoIe (6.23 g, 28.0 mmol, 15 % yield) as an off-white solid. Data for l-(2-fluoro-4-nitrophenyl)-5-methyHH-l,2,4-triazole: LC-MS(M+H)+ = 223.1. 1HNMR (500 MHz, chloroform-*/) delta ppm 8.18 – 8.24 (m, 2 H) 8.04 (s, 1 H) 7.69 – 7.78 (m, 1 H) 2.47-2.53 (m, 3 H).Data for 1 -(2-fluoro-4-nitrophenyl)-3 -methyl- 1 H- 1 ,2,4-triazole: LC-MS (M+H)+ = 223.1. 1H NMR (500 MHz, chloroform-tO delta ppm 8.73 (d, J-2.7 Hz5I H), 8.15 – 8.26 (m, 3 H), 2.53 (s, 3 H).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3-Methyl-1H-1,2,4-triazole.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; MARCIN, Lawrence, R.; THOMPSON, Lorin, A., III; BOY, Kenneth, M.; GUERNON, Jason, M.; HIGGINS, Mendi, A.; SHI, Jianliang; WU, Yong-Jin; ZHANG, Yunhui; MACOR, John, E.; WO2010/83141; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-88-0, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Operating protocol A (82 C., 48 hours) was followed using 117 mg of Chxn-Py-Al (0.4 mmoles), 336 mul of iodobenzene (3 mmoles), 138 mg of 1,2,4-triazole (2 mmoles), 1.042 g of caesium carbonate (3.2 mmoles) and 1.2 ml of DMF. The degree of transformation and selectivity were 100% and 98% respectively. The residue obtained following treatment was purified by silica gel chromatography (eluent: hexane/dichloromethane, 100/0 to 50/50). 264 mg of a dark yellow solid was obtained in a yield of 91%. Pale yellow needles were obtained after re-crystallisation from chloroform. The compound obtained had the following formula: The characteristics were as follows: MPt: 46 C. (CHCl3) (Lit: 46-47 C. given by Micetich, R G; Spevak, P; Hall, T W; Bains, B K; Heterocycles 1985, 23, 1645-1649); 1H NMR/CDCl3: delta8.52 (wide s, 1H, H1), 8.04 (wide s, 1H, H2), 7.53-7.65 (m, 2H, H4,8), 7.26-7.51 (m, 3H, H5,6,7); 13C NMR/CDCl3: delta 152.55 (C1), 140.88 (C2), 139.96 (C3), 129.73 (C5 and C7), 128.15 (C6), 119.99 (C4 and C8); GC/MS: Rt=14.02 min, M/Z=145, purity=100%; Rf=0.21 (eluent: dichloromethane/ethyl acetate, 90/10). Example 1.18; Preparation of 1-phenyl-1H-[1,2,4]triazole; Operating protocol A (82 C., 24 hours) was followed using 117 mg of Chxn-Py-Al (0.4 mmoles), 336 mul of iodobenzene (3 mmoles), 138 mg of 1,2,4-triazole (2 mmoles), 1.042 g of caesium carbonate (3.2 mmoles) and 1.2 ml of DMF. The degree of transformation and selectivity were 79% and 99% respectively. ; Example 1.19; Preparation of 1-phenyl-1H-[1,2,4]triazole; Example 1.18 was repeated, operating at 50 C. (72 hours). The degree of transformation and selectivity for 1-phenyl-1H-[1,2,4-triazole] were 75% and 99% respectively.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,4-Triazole, hurry up and to see.

Reference:
Patent; Taillefer, Marc; Cristau, Henri-Jean; Cellier, Pascal-Philippe; US2005/234239; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7170-01-6

b) Trityl chloride (19.0 g) was added portionwise to a stirred solution of 3-methyl-1,2,4-triazole (5.6 g, commercial) and triethylamine (9.5 ml) in dichloromethane (200 ml). The mixture was diluted with dichloromethane (100 ml), washed with water (50 ml), dried over magnesium sulphate and evaporated under reduced pressure to give 1-trityl-3-methyl-1,2,4-triazole (19.0 g).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 7170-01-6.

Reference:
Patent; Zeneca Limited; US5393732; (1995); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 10570-40-8, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 10570-40-8, name is 4-Methyl-4H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step 2. 40 mmol of 4-methyl-1,2,4-triazole and 80 mmol of ethyl chloride were stirred at 60 C under nitrogen atmosphere, and quaternized and refluxed for 24 h to cause quaternization reaction.The reaction product was washed with n-hexane and rotary evaporated to give a pale yellow liquid.1,2-Diethyl-4-methyl-1,2,4-triazole chloride 7.80 g

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 4-Methyl-4H-1,2,4-triazole, hurry up and to see.

Reference:
Patent; Nanjing Tech University; Guan Guofeng; Ding Jing; He Yuting; Li Xue; Yuan Dashui; Wan Hui; Wang Lei; (9 pag.)CN108250227; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 16681-65-5, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

1-Methyl-1H-1,2,3-triazole was prepared according to the literature reference W02008/98104. To a 2 L flask containing 1-methyl-1H-1,2,3-triazole (9 g, 108.3 mmol) was added THF (1500 mL) and the solution was cooled to -40 C. To this colorless homogeneous solution was added n-butyllithium (2.5 M in hexanes, 45 mL, 112.5 mmol) dropwise which immediately afforded a dark brown viscous mixture. The mixture was kept between -10 to -20 C. for 60 minutes, then a THF solution of 2,4-dimethylthiazole-5-carbaldehyde (17.2 g, 121.8 mmol in 200 mL THF) was introduced via cannula. Once the aldehyde was added the reaction was allowed to warm to room temperature. After 3 hours, the reaction was quenched by pouring it into a saturated solution of aqueous NH4Cl. The aqueous portion was extracted with EtOAc in portions, 7*400 mL. The combined organics were washed with brine, dried over MgSO4, filtered and concentrated to afford a brown oil. Chromatography on silica gel (10% acetone-DCM increasing to 50% acetone and increasing to 10% MeOH-DCM) provided the title compound as an amber solid.

I am very proud of our efforts over the past few months and hope to 1-Methyl-1H-1,2,3-triazole help many people in the next few years.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; US2015/105404; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics