Tag: M.W=0-100

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 584-13-4, name is 4H-1,2,4-Triazol-4-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 4H-1,2,4-Triazol-4-amine

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

If you are hungry for even more, make sure to check my other article about 584-13-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-65-5, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 19a: (3-(4-(1H-pyrazol-1-yl)benzyl)-4-chloro-2-methoxyquinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol A solution of w-butyllithium in hexanes (2.5 M, 0.32 mL, 0.81 nimol) was added dropwise to a stirring solution of 1 -methyl- 1H- 1 ,2,3-triazole (70.4 mg, 0.848 nimol, prepared according to PCX Int. AppL, 2008098104) in tetrahydrofuran (1 mL) at -50 C. After 20 minutes, a solution (gently warmed with a heat, gun to dissolve the ketone starting material) of (3-(4-(lH-pyrazol-l – yl)benzyl)-4-chk>ro~2-methoxyquinolin-6-yl)(l,2-dimethyl-l H- (200 mg, 0.42 mmol, Intermediate 21 : step b) in tetrahydrofuran (1 mL) was added dropwise. After 5 minutes, the flask was allowed to warm to 23 C. After 20 minutes, water (1 mL) was added. The biphasic mixture was partitioned between saturated aqueous sodium chloride solution (25 mL) and ethyl acetate (50 mL). The layers were separated and the organic layer was dried with sodium sulfate. The dried solution was filtered. Silica gel (2 g) was added to the filtrate and the mixture was concentrated by rotary evaporation to afford a free-flowing powder. The powder was loaded onto a silica gel column for flash column chromatography purification. Elution with dichloro methane initially, grading to 10% methanol-dichloromethane provided the title compound which was further purified by RP-HPLC eluting initially with 5% acetonitrile-water (containing 0,05% trifluoroacetic acid), grading to 95% acetonitrile-water (containing 0.05% trifluoroacetic acid) to provide the title compound as a white solid after partitioning the purified material between dichioromethane-saturated aqueous sodium bicarbonate solution, separating the layers, drying the organic layer with sodium sulfate, filtering the dried solution, and concentrating the filtrate to dryness.lH NMR (400 MHz, CDC13) delta ppm 8.21 (s, IH), 7.85 (d, J = 2.4 Hz, I H), 7.74 (d, J = 8.8 Hz, 1H), 7.67 (d, J = 1.7 Hz, 1H), 7.60 – 7.53 (m, 2H), 7.41 – 7.33 (m, 3H), 7.11 (d, J = 1.4 Hz, IH), 6.46 – 6.39 (m, I H), 6.08 – 6.02 (m, IH), 4,27 (s, 2H), 4.08 (s, 3H), 3.89 (s, 3H), 3.35 (s, 3H), 2.20 (s, 3H); MS (ESI): mass calcd. for C29H27CIN8O2, 554.2; ni/z found, 555.2 j VI · Pi | .(3-(4-(]J/-P Tazol-l-yl)benzyl)-4-cMyl)(l-methyl-lH-l ,2,3-triazo3-5-yl)methanol was purified by chiral SFC (Chiralpak AD-H, 5 muetaiota, 250 x 20 mm, mobile phase: 55% CO2, 45% methanol containing 0.03% isopropylamine) to provide two enantiomers. The first eluting enantiomer was Example 19b: NMR (500 MHz, CDC3) delta ppm 8.17 (d, ./ 2.2 Hz, 1 H), 7.88 – 7.84 (m, 1H), 7.78 (d, ./ 8.7 Hz, 1 H), 7.70 – 7.66 (m, 1H), 7.61 – 7.55 (m, 2H), 7.41 – 7.34 (m, 3H), 7.18 (s, 1 H), 6.47 – 6.39 (m, 1H), 6.16 (s, 5 H), 4.32 (s, 2H), 4.10 (s, 31 1). 3.92 (s, 3H), 3.40 (s. 3H), 2.33 (s, 3H); MS { LSI}: mass calcd. for C29H27C3N8O2, 554.2; m/z found, 555.5 [M+H] and the second eluting enantiomer was Example 19c:JH NMR (500 MHz, CDCI3) delta ppm 8.18 (d, J 2.2 Hz, 1H), 7.85 (d, J = 2.5 Hz, I I I). 7.76 id. ./ = 8.8 Hz, 1 1 1). 7.68 (d, ./ = 1.7 Hz, I H), 7.61 – 7.55 (m, 2H), 7.42 – 7.34 (m, 31 1). 7.17 (s, IH), 6.43 (t, ./ 2.1 Hz, }. 6.13 (s, }. 4.31 (s. 2H), 4.10 (s. 3H), 3.91 (s, 3H), 3.39 (s, 3H), 2.31 (s, 3H); MS (ESI): mass calcd. for C29H27CIN8O2, 554.2; m/z found, 555.5 [M+H]+.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 16681-65-5, Happy reading!

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 3,5-Diamino-1,2,4-triazole

A mixture of Zn(NO3)26H2O (0.030 g, 0.1 mmol), H3bpt (0.025 g,0.1 mmol), Hdatrz (0.01 g, 0.1 mmol), DMF (3 mL) and CH3OH(1 mL) was placed in a small vial at 90 C for 72 h and then cooledto room temperature slowly. Colorless block crystals were obtainedin 42percent yield based on Zn(NO3)26H2O. Anal. calcd. forC36H29N11O12Zn3 (1004.88): C, 42.99; H, 2.89; N, 15.33percent. Found: C,42.89; H, 2.85; N, 15.42percent. IR (cm1): 3422(w), 1712(m), 1675(s),1587(m), 1509(m), 1389(m), 1378(m), 1109(w), 1025(w), 958(m),893(m), 826(m), 778(w), 690(w), 674(w), 589(w), 562(w).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3,5-Diamino-1,2,4-triazole, in my other articles.

Reference:
Article; Zhao, Haixiang; Dong, Yanli; Liu, Haiping; Journal of Molecular Structure; vol. 1105; (2016); p. 112 – 117;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7170-01-6, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a stirred solution of 1-fluoro-2-methoxy-4-nitrobenzene (2.5 g, 14.60 mmol) in DMF (25 mL) under an argon atmosphere were added potassium carbonate (4 g, 29.20 mmol) and 3-methyl-1H-1, 2, 4-triazole (1.2 g, 14.60 mmol) at room temperature. The reaction mixture was stirred at 85 oC for 16 h in a sealed tube. After consumption of the starting material (monitored by TLC), the reaction mixture was diluted with water (100 mL) and extracted with EtOAc (2 x 50 mL). The combined organic extracts were dried over sodium sulfate, filtered and concentrated in vacuo. The crude material was purified by column chromatography using 15-25% EtOAc:hexane to afford 1-fluoro-2-methoxy-4-nitrobenzene (1.2 g, 35%) as an off-white solid. 1H-NMR (CDCl3, 400 MHz): delta 8.87 (s, 1H), 8.10 (d, 1H), 8.00-7.97 (m, 2H), 4.10 (s, 3H), 2.50 (s, 3H); LCMS: 234.9 (M+1); (column; Ascentis Express C-18 (50 × 3.0 mm, 2.7 mum); RT 2.02 min. 0.025% Aq TFA+5% ACN: ACN+5% 0.025% Aq TFA; 1.2 mL/min); TLC: 30% EtOAc:hexane (Rf: 0.2).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 3-Methyl-1H-1,2,4-triazole.

Reference:
Patent; FORUM PHARMACEUTICALS INC.; BURNETT, Duane, A.; BURSAVICH, Matthew, Gregory; MCRINER, Andrew, J.; WO2015/109109; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C3H5N3

To a flask containing 1-methyl-1H-1,2,3-triazole (111 mg, 1.34 mmol) was added THF (10 mL) and the solution was cooled to -45 C. using a CH3CN-CO2 bath. n-BuLi (2.5 M in hexanes, 0.5 mL, 1.25 mmol) was added dropwise to provide a white suspension. The suspension was stirred at -45 C. for 25 minutes. A pre-warmed THF solution of (2,4-dichloro-3-(2,2,2-trifluoroethyl)quinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (470 mg, 1.17 mmol in 7 mL THF, Intermediate 70) was introduced at -45 C. The reaction temperature was allowed to warm gradually to room temperature over 70 minutes then quenched with aqueous NH4Cl solution. The aqueous portion was extracted with EtOAc (3*40 mL), and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated. Chromatography on silica gel (2% MeOH-DCM increasing to 8% MeOH) afforded the title compound as a tan amorphous solid. MS (ESI): mass calcd. for C20H17Cl2F3N6O, 484.1. found, 485.0 (M+H)+. 1H NMR (500 MHz, CDCl3) delta ppm 8.60 (s, 1H), 8.44-8.40 (m, 2H), 7.95 (d, J=8.8 Hz, 1H), 7.62 (dd, J=8.8, 1.8 Hz, 2H), 6.95 (s, 1H), 5.89 (s, 1H), 4.05 (q, J=9.6 Hz, 2H), 3.89 (s, 3H), 3.32 (s, 3H).

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1-Methyl-1H-1,2,3-triazole ,and how the biochemistry of the body works.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.1455-77-2, name is 3,5-Diamino-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 1455-77-2

2-Hydroxybenzaldehyde (0.02 mol L1, 2 mL) in ethanol (10 mL)was added to a magnetically stirred solution of 3,5-diamino-1,2,4-triazole (0.01 mol L1, 0.99 mg) in ethanol (20 mL). The mixture was refluxed for 2 h. The reaction was monitored through TLC.During refluxing yellow precipitates started forming. It was refluxed for another half an hour. It was then cooled to room temperature, filtered, washed with cold ethanol (2 10 mL) thenwith ether (2 5 mL), dried and recrystallized in a mixture of hot ethanol and ether (2:1).2.3. 2-{(E)-[(3-{[(Z)-(2-hydroxyphenyl)methylidene]amino}-1H-1,2,4-triazol-5-yl)imino]methyl}phenol (L)Yield: (1.63 g, 75percent); mp: 244 °C; color (yellow): IR (cm-1): 3429(OH), 3195 (N-H), 1634 (HC=N), 1604 (C=N) and 1023 (N-N); 1HNMR (ppm DMSO?d6): d 12.81 (s, 1H, NH), 12.14 (s, 1H, OH), 9.16 (s,2H, C7-H, C7,-H), 6.97-7.69 (m, Ar-H); 13C NMR (DMSO?d6):d 157.19 (C8,C8,), 160.67 (C7,C7,), 168.54 (C1, C1,), 117.05-133.93(Ar-C); Mass Spectrum EIMS m/z (percent): 307.31: [M], 308.0(10),277.1(17), 204.1(13), 185.1(100), 171.1(6), 157.0(4). Anal. Calc. for C16H13N5O2 (307.31): C, 62.53 (62.45); H, 4.26 (4.20); N, 22.79(22.72).

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 3,5-Diamino-1,2,4-triazole ,and how the biochemistry of the body works.

Reference:
Article; Sumrra, Sajjad Hussain; Kausar, Samia; Raza, Muhammad Asam; Zubair, Muhammad; Zafar, Muhammad Nadeem; Nadeem, Muhammad Arif; Mughal, Ehsan Ullah; Chohan, Zahid Hussain; Mushtaq, Fazila; Rashid, Umer; Journal of Molecular Structure; vol. 1168; (2018); p. 202 – 211;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C2H4N4

A mixture of aldehyde (1 mmol), dimedone (1 mmol), 3-amino-1,2,4-triazole (1 mmol), and [C4(H-DABCO)2][HSO4]4 (16 mg) washeated in an oil bath (90 C) under solvent-free conditions. Aftercompletion of the reaction, as identified by TLC, using n-hexane:EtOAc (7:3) as the eluent, 10 mL of water was added and stirredfor 10 min. The catalyst was dissolved in water and the solid wasfiltered off and washed with warm EtOH, to obtain the pure targetmolecule.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazol-5-amine help many people in the next few years.

Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 7170-01-6, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

EXAMPLE 102 [2-Chloro-4-(3-methyl-1,2,4-triazol-1-yl)-phenyl](5H,11H-pyrrolo[2,1-c]-[1,4]benzodiazepin-10-yl)-methanone To a suspension of 60% sodium hydride in oil (0.3 g) in dimethylformamide (50 ml) was added dropwise 3-methyl-1,2,4-triazole (0.45 g). After hydrogen gas evolution ceased, 2-chloro-4-fluorophenyl-(5H,11H-pyrrolo[2,1-c][1,4]benzodiazepine-10-yl)-methanone (1.70 g) was added and the reaction mixture was heated in a sand bath at 110 C. for 18 hours. The mixture was poured onto ice, diluted with brine, and extracted with dichloromethane. The combined extracts were dried over anhydrous sodium sulfate and filtered through a short column of anhydrous sodium magnesium silicate. The solution was concentrated in vacuo and the residue was triturated with diethyl ether to give 1.25 g of the title compound as colorless crystals, m.p. 191-193 C., MS m/z: 404.1 (M+H)+.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 3-Methyl-1H-1,2,4-triazole is helpful to your research.

Reference:
Patent; Wyeth; US6511974; (2003); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-88-0

Example 9; The same procedure and work-up treatment as Example 9 were performed, except that 20% aqueous potassium hydroxide solution (8.4g, 0.03 mol) was used in place of 20% aqueous sodium hydroxide solution (6.0g, 0.03 mol), to give (2R, 3S)-2-(2,4-difluorophenyl)-3-methyl-2-[(1H-1,2,4-triazol-1-yl)methyl]oxirane (11.0g, yield 43.8%, optical purity (HPLC condition-1) 100% e.e., mp 89C).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 288-88-0

Reference:
Patent; Sumitomo Chemical Company, Limited; EP1818332; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 288-36-8

Compound 8 was prepared by adapting a procedure described. 13 A degased solution of Pd2(dba)3 (20 mg, 90 mumol) and 2-di-tert-butylphosphino-3,4,5,6-tetramethyl-2′,4′,6′-triisopropyl-1,1′-biphenyl (104 mg, 0.22 mmol) in toluene (6 mL) was heated at 120 C for 5 min and transferred to a degased mixture of K3PO4 (5.1 g, 24 mmol), 1,2,3-triazole (0.83 mL, 14 mmol) and 1-bromo-4-(trifluoromethoxy)benzene (1.8 mL, 12 mmol) in toluene (6 mL). The resulting mixture was heated under argon at 120 C for 24 h. CH2Cl2 (30 mL) was added, the organic phase was washed with NH4Cl-saturated water (10 mL) and brine (10 mL), and the solvent was evaporated. The crude product was purified by chromatography over silica gel (eluent: heptane/AcOEt 95:5) to afford the pure compound in 96% yield as a beige powder: mp <50 C; IR (ATR): 1606, 1511, 1411, 1386, 1251, 1207, 1193, 1152, 1100, 1084, 1056, 962, 949, 921, 852, 821, 731, 664 cm-1; 1H NMR (CDCl3, 300 MHz) 7.32-7.36 (m, 2H), 7.82 (s, 2H), 8.11-8.15 (m, 2H); 13C NMR (CDCl3, 75 MHz) 120.4 (2CH), 120.6 (q, C, J = 256 Hz), 122.0 (2CH), 136.0 (2CH), 138.4 (C), 148.3 (C); 19F NMR (CDCl3, 282 MHz) -58.0. The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 288-36-8 Reference:
Article; Nagaradja, Elisabeth; Bentabed-Ababsa, Ghenia; Scalabrini, Mathieu; Chevallier, Floris; Philippot, Stephanie; Fontanay, Stephane; Duval, Raphael E.; Halauko, Yury S.; Ivashkevich, Oleg A.; Matulis, Vadim E.; Roisnel, Thierry; Mongin, Florence; Bioorganic and Medicinal Chemistry; vol. 23; 19; (2015); p. 6355 – 6363;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics