Triazoles

4928-87-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, This compound has unique chemical properties. The synthetic route is as follows.

Under ice-water bath, 39.4 mg (0.349 mmol)1,2,4-triazole-3-carboxylic acid and 16.28 mg (0.426 mmol)2- (7-azobenzotriazole) -Nu, Nu, N, N-tetramethyluronium hexafluorophosphate was dissolved in 5 mL of dichloromethane(0.96 mmol) of triethylamine was added, and after stirring at 0 C for 30 minutes, 100 mg (0.194 mmol) of intermediate 130 was added,Stir the temperature overnight. TLC, after the completion of the reaction, 10 mL of saturated aqueous sodium bicarbonate solution was added, stirred for 20 minutes, separated, the aqueous phaseExtraction with methylene chloride, combined organic phase, dry, spin dry to obtain crude. The crude product was purified by preparative silica gel plate (dichloromethane / AAlcohol = 10/1, V / V) to give 10 of the title compound as a white solid in a yield of 8.4%

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Beijing Foreland Pharma Co., Ltd; Zhang, Xingmin; Wang, Ensi; Niu, Shengxiu; Guo, Jing; Dai, Zhuolin; Zheng, Nan; Ji, Qi; Li, Qinyan; Liang, Tie; (109 pag.)CN104411706; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7343-34-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

A mixture of Zn(NO3)2¡¤6H2O (60 mg, 0.2 mmol), HCOONa¡¤2H2O (14 mg, 0.1 mmol), Hdmtz(19 mg, 0.2 mmol), an aqueous dimethylamine solution (0.3 mmol, 33percent), and H2O (3 ml) was placed in a Teflon-linedstainless steel vessel (12 ml), heated at 120 ¡ãC for 72 h, and then cooled to room temperature at a rate of 5 ¡ãC/h. Colorlessblock crystals of 1 were collected by filtration, washed with water, and dried in air to afford 22 mg (62percent based on Zn) of theproduct. Anal. calcd. for C13H22N10O8Zn4 (percent): C 22.06, H 3.13, N 19.79. Found (percent): C 22.12, H 3.09, N, 19.82. IR(KBr, cm?1): 3476(m), 1612(s), 1527(m), 1451(m), 1385(m), 1340(m), 1129(w), 1036(w), 881(w), 772(w), 700(w), 546(m).

The synthetic route of 3,5-Dimethyl-4H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Article; Fang; Yang; Dou; Zhu; Xu; Journal of Structural Chemistry; vol. 59; 6; (2018); p. 1450 – 1455; Zh. Strukt. Kim.; vol. 59; 6; (2018); p. 1503 – 1507,5;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

4928-87-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 4928-87-4 name is 1,2,4-Triazole-3-carboxylic acid, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To prepare nano-sized [Mn(L)2(H2O)2] (1), 50ml solution of manganese(II) chloride tetrahydrate (0.1molL-1) in water was positioned in a high-density ultrasonic probe, operating at 40kHz with a maximum power output of 305W. Into this solution water a 50ml solution of the ligand 1H-1,2,4-triazole-3-carboxylic acid (0.1molL-1) and potassium hydroxide (0.01molL-1) were added dropwise. The obtained precipitates were filtered off, washed with water and then dried in air. m.p.>300C.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1,2,4-Triazole-3-carboxylic acid, and friends who are interested can also refer to it.

Reference:
Article; Safarifard, Vahid; Morsali, Ali; Ultrasonics Sonochemistry; vol. 21; 1; (2014); p. 253 – 261;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, A new synthetic method of this compound is introduced below., 16681-65-5

n-BuLi (1.23 M in hexanes, 447 muL, 0.55 mmol) was added dropwise to a stirred slurry of 1-methyl-1,2,3-triazole (46 mg, 0.55 mmol) in THF (1 mL) at -40 C. under nitrogen. After stirring for 30 minutes at -40 C., the mixture was treated dropwise with a solution of (2,4-dichloro-3-isopropoxyquinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (104 mg, 0.27 mmol, Intermediate 25) in THF (1 mL). The reaction was allowed to warm to room temperature over 1 hour. The reaction was then quenched with saturated aqueous NH4Cl. The mixture was poured into a separatory funnel and extracted with DCM (2*25 mL). The organics were combined, washed with brine, dried (Na2SO4), filtered and concentrated to dryness to afford an orange-brown foam. The crude material was purified by FCC (1-7.5% MeOH/DCM) followed by reverse-phase HPLC (acetonitrile/water+0.05% TFA) to provide the title compound as a clear colorless oil. 1H NMR (500 MHz, CDCl3) delta ppm 8.23-8.20 (m, 1H), 7.98 (d, J=8.8 Hz, 1H), 7.52-7.48 (m, 1H), 7.24 (s, 1H), 6.40 (s, 1H), 4.80-4.73 (m, 1H), 3.92 (s, 3H), 3.63 (s, 3H), 2.58 (s, 3H), 1.44-1.41 (m, 6H). MS (ESI): mass calcd. for C21H22Cl2N6O2, 460.1. m/z found, 461.1 [M+H]+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. 61-82-5

General procedure: A mixture of 1,2,4-triazol-3-amine 1 (1 mmol), aromatic aldehydes2a-o (1 mmol) and 1,3-cyclohexanedione 3 (1 mmol) were taken into a RB flask, irradiated under MW at 150 W for 60 s. The progress ofthe reaction was observed by TLC. After cooling, the reaction mass becamegummy,washed thoroughlywith 1:1 hexane and ethyl ethanoateto afford the compounds 4a-o (Scheme 1).

The synthetic route of 61-82-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sompalle, Rajesh; Arunachalam, Prabhakarn; Roopan, Selvaraj Mohana; Journal of Molecular Liquids; vol. 224; (2016); p. 1348 – 1357;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, Adding some certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8.

2-(2H-l,2,3-Triazol-2-vD-5-methylbenzoic acid (1-7)A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in water with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid 1-5. followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. Data for K7: 1HNMR (500 MHz, DMSO-d6) d 12.98 (br s , IH), 8.04 (s, 2H), 7.72-7.45 (m, 3H), 2.41 (s, 3H) ppm.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 288-36-8.

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; FRALEY, Mark, E.; SCHREIER, John, D.; WO2010/48017; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7343-33-1, Adding a certain compound to certain chemical reactions, such as: 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7343-33-1.

EXAMPLE 6 fPROCEDURES)(1 S,4a/?,6aS,7/?,8/?, 1 Oa/?, 10b/?, 12a/?, 1 AR, 15R)- 15-[[(2/?)-2-amino-2,3- dimethylbutyl]oxy]-14-(3-bromo-4H-l,2,4-triazol-4-yl)-8-[(l/?)-l,2-dimethylpropyl]-1 ,6,6a,7,8,9, 10, 10a, 10b, 11 , 12, 12a-dodecahydro- 1 ,6a,8, 10a-tetramethyl-4//- 1 ,4a-propano-2H- phenanthro[l,2-c]pyran-7-carboxylic acid (EXAMPLE 6A) and(1 S,4a/?,6aS,7/?,8/?, 1 Oa/?, 10b/?, 12a/?, 14/?, 15R)- 15-[[(2/?)-2-amino-2,3- dimethylbutyl]oxy]-14-(5-bromo-/H-l,2,4-triazol-l-yl)-8-[(l/?)-l,2-dimethylpropyl]-1 ,6,6a,7,8,9, 10, 10a, 10b, 11 , 12, 12a-dodecahydro- 1 ,6a,8, 1 Oa-tetramethyl-4//- 1 ,4a-propano-2H- phenanthro[l,2-c]pyran-7-carboxylic acid (EXAMPLE 6B) and( 1 S,4aR,6aS,7R,8R, 1 Oa/?, 1 Obi?, 12aK, 1 AR, 15R)- 15-[[(2i?)-2-amino-2,3- dimethylbutyl]oxy]-14-(3-bromo-7H-l,2,4-triazol-l-yl)-8-[(li?)-l,2-dimethylpropyl]- 1 ,6,6a,7,8,9, 10, 1 Oa, 1 Ob, 11 , 12, 12a-dodecahydro- 1 ,6a,8, 1 Oa-tetramethyl-^H- 1 ,4a-propano-2H- phenanthro[l,2-c]pyran-7-carboxylic acid (EXAMPLE 6C)3-bromo-lH-l,2,4-triazole (32.1 mg, 0.217 mmol) and BF3OEt2 (54 mul, 0.426 mmol) were added to a stirred solution of Intermediate 6 (26.0 mg, 0.043 mmol) in 1,2- dichloroethane (0.43 ml). The reaction mixture was a light yellow solution that was heated to 5O0C. After 1.75 hr, LCMS and 1H NMR showed complete consumption of Intermediate 6. The reaction mixture was cooled to room temperature, the solvent was evaporated, and the resulting residue was placed under high vacuum. The residue was dissolved in methanol and separated using a single HPLC run on a 19 x 150 mm Sunfire Prep Cl 8 OBD 10 mum column by eluting with acetonitrile/water + 0.1percent TFA. The HPLC fractions containing the fastest eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6A (3.6 mg) as a white solid. The HPLC fractions containing the second eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6B (13.1 mg) as a white solid. The HPLC fractions containing the slowest eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6C (5.8 mg) as a white solid.EXAMPLE 6A: 1H NMR (CD3OD, 600 MHz, ppm) delta 0.76 (s, 3H, Me), 0.76 (d, 3H, Me), 0.81 (d,3H, Me), 0.84 (d, 3H, Me), 0.85 (d, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 0.94 (s, 3H, Me), 1.16 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.35 (m), 1.40-1.44 (m), 1.46-1.65 (m), 1.73-1.96 (m), 2.11-2.22 (m), 2.43 (broad dd, IH, H13), 2.79 (broad d, IH), 2.84 (s, IH, H7), 3.49 (d, IH), 3.53 (d, 2H), 3.60 (d, IH), 3.73 (broad d, IH), 3.94 (d, IH), 5.50 (dd, IH, H5), 5.72-5.80 (broad m, IH, H 14), 9.29 (broad s, IH, triazole).Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).EXAMPLE 6B:1H NMR (CD3OD, 600 MHz, ppm) delta 0.75 (s, 3H, Me), 0.76 (d, 3H, Me), 0.79 (d, 3H, Me), 0.83 (d, 3H, Me), 0.84 (d, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 0.91 (s, 3H, Me), 1.13 (s, 3H, Me), 1.19 (s, 3H, Me), 1.22-1.34 (m), 1.39-1.43 (m), 1.46-1.56 (m), 1.58-1.64 (m), 1.72-1.95 (m), 2.09-2.21 (m), 2.30 (dd, IH, H13), 2.83 (s, IH, H7), 2.85 (d, IH), 3.48 (d, IH), 3.48 (d, IH), 3.54 (dd, IH), 3.60 (d, IH), 3.88 (d, IH), 3.95 (d, IH), 5.47 (dd, IH, H5), 5.71-5.77 (m, IH, H14), 8.10 (s, IH, triazole). Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).EXAMPLE 6C:1H NMR (CD3OD, 600 MHz, ppm) delta 0.76 (s, 3H, Me), 0.77 (d, 3H, Me), 0.82 (d, 3H, Me), 0.85 (d, 3H, Me), 0.86 (s, 3H, Me), 0.86 (d, 3H, Me), 0.89 (d, 3H, Me), 0.92 (s, 3H, Me), 1.16 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.34 (m), 1.39-1.44 (m), 1.48-1.65 (m), 1.76-1.96 (m), 2.11-2.22 (m), 2.41 (dd, IH, H13), 2.72 (d, IH), 2.84 (s, IH, H7), 3.47 (d, IH), 3.50 (d, IH), 3.52 (dd, IH), 3.58 (d, IH), 3.72 (d, IH), 3.91 (d, IH), 5.48 (dd, IH, H5), 5.51-5.57 (m, IH, H 14), 8.52 (s, IH, triazole).Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Bromo-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; GREENLEE, Mark, L.; WILKENING, Robert; APGAR, James; WILDONGER, Kenneth, James; MENG, Dongfang; PARKER, Dann, L.; WO2010/19203; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common compound: 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 7411-23-6

In a 100 mL round bottomed flask, 3,5-dibromo-1H-1,2,4-triazole (lnt-1, 2.50 g, 11 mmol) was dissolved in DMF (32 mL) and the solution was cooled to 0-5 C (ice bath). Sodium hydride (55% dispersion in mineral oil, 577 mg, 13.2 mmol) was added in portions and the resulting mixture was stirred for 5 min at 0-5 C and for 15 min at room temperature. After that, ethyl methanesulfonate (2.74 g, 2.27 mL, 22 mmol) was added dropwise at room temperature. The resulting mixture was stirred for 1.5 h at 100 C, and 16 h at room temperature. After that, it was concentrated in vacuo, the residue was diluted with ethyl acetate (100 mL) and water (100 mL), the aqueous phase was extracted with ethyl acetate (3 x 100 mL). The combined organic layers were dried (sodium sulfate) and concentrated in vacuo, the residue was purified by column chromatography (silica gel, 70 g, eluting with ethyl acetate / n-heptane, gradient 0: 100 to 22:78 v/v) to yield the title compound as white solid (1.98 g, 70%). HPLC (method LCMS_fastgradient) tR = 0.88 min. 1H NMR (CDCl3, 300 MHz): delta 1.49 (t, J = 7.2 Hz, 3 H), 4.21 (q, J= 7.2 Hz, 2 H). MS (ES+) m/z 253.9, 255.9, 258.0 [M+H, 2 Br isotopes] .

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7411-23-6, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-36-8, name is 1H-1,2,3-Triazole, This compound has unique chemical properties. The synthetic route is as follows., 288-36-8

To a mixture of the product from step 2 (7.9 g, 38 mmol), cesium carbonate (24.8 g,76 mmol) and CuT (2.88 g, 7.6 mmol) in DMF (200 mL) were added 2H-[1,2,3jtriazole (5.24 g,76 mmol) and N,N?-dimethyl-cyclohexane-1,2-diamine (0.9 g, 6.5 mmol) and the mixture was heated to 110C overnight. The cooled reaction mixture was adjusted to pH=12 with 1M sodium hydroxide aqueous solution and extracted with EtOAc (50 mL x 3). The aqueous layer wasadjusted to pH=4 with 1M HC1 aqueous solution and extracted with EtOAc (50 mLx4). The extracts was dried over Na2504, filtered. The filtrate was concentrated in vacuo and the residue was purified by chromatography on silica (petroleum ether: EtOAc =10:1) to provide the title compound. LRTVIS m/z (M+H) 196.0 found, 196.0 required.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KIM, Ronald; KUDUK, Scott, D.; LIVERTON, Nigel; ZHUO, Gang; (97 pag.)WO2016/100157; (2016); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1533519-84-4 name is 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 1533519-84-4

To a 250 mL reaction flask was added 4-(4-cyclopropylnaphthalen-1-yl)-4Eta-1,2,4-triazole-3-thiol (Compound A, 58, 0.01811101), potassium carbonate (3.748, 0.02711101, 1.569), 01 ^ (5011 ^). Ethyl bromoacetate was added dropwise with stirring (3.3 g, 0.022 mol 1,1.2 eq). After completion of the reaction, the reaction was stirred at room temperature for 1.5 h. Sampling After testing the raw material, the reaction is complete, Should be added to the liquid ice water 1OOmL, a white solid precipitation. Stir for 30min, suction filter, washed. After the cake was dried, the residue was washed with ethyl acetate Recrystallization gave

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione, and friends who are interested can also refer to it.

Reference:
Patent; Zhejiang Jingxin Pharmaceutical Co., Ltd.; Shanghai Jingxin Bio-pharmaceutical Co., Ltd.; Dai Xiangqian; Huang Yue; (17 pag.)CN107098866; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics