Triazoles

Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 288-36-8

1,2,3-Triazole (3.45 g, 50 mmol),2-iodo-5-methylbenzoic acid (5.24 g, 20 mmol),Cesium carbonate (11.72 g, 36 mmol),Trans-N, N’-dimethyl-1,2-cyclohexanediamine (0.51 g, 3.6 mmol),Cuprous iodide (0.38 g, 2 mmol),N, N-dimethylformamide (30 mL) were sequentially added into a 100 mL single-necked round bottom flask, and the mixture was gradually heated to 100 C. under a nitrogen atmosphere for reaction for 4 hours. The reaction was stopped, cooled, diluted with tap water and extracted with ethyl acetate (200 mL x 2). The aqueous layer was acidified with concentrated hydrochloric acid (pH = 1-2) and extracted with ethyl acetate (200 mL x 2). The combined organic layers were combined and dried over anhydrous sodium sulfate and filtered. The filtrate was evaporated to dryness under reduced pressure and subjected to column chromatography Purification (dichloromethane / methanol (v / v) = 50/1) afforded the title compound (yellow solid, 2.76 g, 68%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Xu Juan; Zhong Wenhe; Zhang Yingjun; Liu Qi; (35 pag.)CN105949203; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., 7170-01-6

A mixture of 3 -methyl- IH-1, 2,4-triazole (15.0 g, 181 mmol), l,2-difluoro-4- nitrobenzene (28.7 g, 181 mmol), and sodium bicarbonate (15.2 g, 181 mmol) in DMSO (100 mL) was heated at 80 0C for 48 h. The reaction mixture was allowed to cool to rt and was poured into water (800 mL). The aqueous mixture was extracted with EtOAc (3 x 200 mL). The combined organic extracts were sequentially washed with water (500 mL) and brine solution (100 mL). The organic layer was dried over sodium sulfate, filtered, and concentrated in vacuo. The crude reaction mixture was purified using silica gel chromatography (30-80% EtOAc/hexane, linear gradient) to afford two regioisomeric products. Pure fractions of the less polar regioisomer were combined and concentrated to afford l-(2-fluoro-4-nitrophenyl)-3-methyl-lH-l,2,4-triazole (7.2 g, 30.8 mmol, 17 % yield) as an off-white solid. Pure fractions of the more polar regioisomer were combined and concentrated to afford l-(2-fluoro-4-nitrophenyl)-5-methyl-lH-l,2,4-triazole (6.23 g, 28.0 mmol, 15 % yield) as an off-white solid. Data for l-(2-fluoro-4-nitrophenyl)-3- methyl-lH-l,2,4-triazole: LC-MS (M+H)+ = 223.1. 1H NMR (500 MHz, CDCl3) delta ppm 8.73 (d, J=2.7 Hz, 1 H), 8.15 – 8.26 (m, 3 H), 2.53 (s, 3 H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; BOY, Kenneth M.; GUERNON, Jason M.; MACOR, John E.; OLSON, Richard E.; SHI, Jianliang; THOMPSON, III, Lorin A.; WU, Yong-Jin; XU, Li; ZHANG, Yunhui; ZUEV, Dmitry S.; WO2011/14535; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, Name is 3,5-Dibromo-1H-1,2,4-triazole, 7411-23-6, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

EXAMPLE 1Preparation of 2-(3,5-dibromo-1H-1,2,4-triazol-1-yl)-1-(2,4-difluorophenyl)ethan-1-oneFirst, 43.7 g of 3,5-dibromo-1H-1,2,4-triazole is introduced into 200 mL of tetrahydrofuran (THF), the resultant mixture is agitated, and 40.4 g of 2-chloro-2,4-difluoroacetophenone is further introduced thereto. Next, 36.3 g of potassium carbonate is introduced to the reaction mixture and the resultant mixture is agitated for 7 hours at room temperature. After the completion of the reaction, the reaction mixture is filtered, washed with 100 mL of tetrahydrofuran (THF), and concentrated at room temperature. Then, 437 mL of purified water is introduced so that the crystals are slurried, followed by filtering. The filtered crystals are reslurried in 175 mL of isopropanol and filtered again. The crystals are washed with 44 mL of isopropanol and dried with hot air at 50 C. to obtain 63.8 g of the title compound as a white solid (yield 87%, purity 99.2%, HPLC, detected at a wavelength of 256 nm, 18C 4.6¡Á250 mm, mobile phase 60% ACN, flow rate 1 mL/min).1H-NMR (200 MHz, CDCl3) delta (ppm): 8.118.03(1H), 7.11-6.96(2H), 5.51(2H).

Statistics shows that 3,5-Dibromo-1H-1,2,4-triazole is playing an increasingly important role. we look forward to future research findings about 7411-23-6.

Reference:
Patent; Dongkook Pharmaceutical Co., Ltd.; US2013/5973; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

4928-87-4, Adding a certain compound to certain chemical reactions, such as: 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4928-87-4.

General procedure: The tail group amines Ar-NH2 (Ar a-d) (19.5 mmol,1.1 equiv) were added to a stirring solution of 1,2,4-triazole-3-carboxylic acid 12 (2.00 g, 17.7 mmol, 1.0 equiv) in dry DMF(30 mL) at room temperature. After 5 min, TBTU (6.0 g, 18.6 mmol,1.0 equiv) and DIPEA (11.0 mL, 61.9 mmol, 3.5 equiv) were added insequence. The resulting solution was stirred at room temperaturefor 16 h. After completion of the reaction, as indicated by TLC, DMFwas removed by rotary evaporation at 30 torr and 70 C. The crudematerial was purified by methods described in each individualentry.

According to the analysis of related databases, 4928-87-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Chakraborty, Amarraj; Dou, Yali; Gibbons, Garrett S.; Grigsby, Sierrah M.; Lee, Young-Tae; Liao, Chenzhong; Mathew, Bini; Moukha-Chafiq, Omar; Nikolovska-Coleska, Zaneta; Pathak, Vibha; Reynolds, Robert C.; Schuerer, Stephan C.; Snowden, Timothy S.; Umeano, Afoma C.; European Journal of Medicinal Chemistry; vol. 189; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 288-36-8

A solution of 2-bromo-3-thiophene carboxylic acid (1.50 g, 7.24 mmol) , 1H-1, 2, 3-triazole (0.600 g, 8.69 mmol) , potassium carbonate (2.00 g, 14.5 mmol) , and copper iodide (0.138 g, 0.724 mmol) in DMF (36.2 mL) was purged subsurface with nitrogen and heated at 75 for 96 h. The reaction was diluted with water, washed with ether, and acidified with conc. HCl. The acidic aqueous solution was extracted 3x with EtOAc and the combined organic fractions were washed with brine, dried over MgSO4, filtered, and concentrated in vacuo. The crude material was purified by silica gel column chromatography [0-70 (1acetic acid in EtOAc) in hexanes] , providing the title compound as a solid. LRMS m/z (M+H) 196.2 found, 196.1 required.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott D.; LIVERTON, Nigel; LUO, Yunfu; (59 pag.)WO2016/101118; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 61-82-5.

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-1,2,4-Triazol-5-amine, its application will become more common.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

4928-88-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 4928-88-5 as follows.

EXAMPLE 6 A mixture of methyl 1,2,4-triazole-3-carboxylate (26.4 g, 0.21 mole) and beta-D-ribofuranosyl-1,2,3,5-tetraacetate (60.2 g, 0.19 mole) was melted and then 0.36 g (0.01 eq.) of p-toluenesulfonic acid was added thereto. The reaction mixture was reacted for 5 hours, while maintaining the temperature of the reaction mixture at 95+-5¡ã C. And then, the reaction mixture was crystallized with 300.8 me of methanol to give 58.9 g of 1-(2,3,5-tri-O-acetyl-beta-D-ribofuranosyl)-1,2,4-triazole-3-carboxylic acid methyl ester (yield: 81percent).

According to the analysis of related databases, 4928-88-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Lee, Tai-Au; Park, Nam-Jin; Khoo, Ja-Heouk; Lee, Byung-Cheol; US2003/120064; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7170-01-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 7170-01-6 name is 3-Methyl-1H-1,2,4-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

EXAMPLE 102 [2-Chloro-4-(3-methyl-1,2,4-triazol-1-yl)-phenyl](5H,11H-pyrrolo[2,1-c]-[1,4]benzodiazepin-10-yl)-methanone To a suspension of 60% sodium hydride in oil (0.3 g) in dimethylformamide (50 ml) was added dropwise 3-methyl-1,2,4-triazole (0.45 g). After hydrogen gas evolution ceased, 2-chloro-4-fluorophenyl-(5H,11H-pyrrolo[2,1-c][1,4]benzodiazepine-10-yl)-methanone (1.70 g) was added and the reaction mixture was heated in a sand bath at 110 C. for 18 hours. The mixture was poured onto ice, diluted with brine, and extracted with dichloromethane. The combined extracts were dried over anhydrous sodium sulfate and filtered through a short column of anhydrous sodium magnesium silicate. The solution was concentrated in vacuo and the residue was triturated with diethyl ether to give 1.25 g of the title compound as colorless crystals, m.p. 191-193 C., MS m/z: 404.1 (M+H)+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Methyl-1H-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Patent; Wyeth; US6511974; (2003); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7170-01-6 as follows. 7170-01-6

Example 93: Preparation of 4-(3-Methyl-lH-l,2,4-triazol-l-yl)benzaldehyde (DI53) To a stirring solution of 4-fluorobenzaldehyde (5.0 g, 40.32 mmol) in DMF (50 mL), were added K2C03 (3.34 g, 40.32 mmol) and 3-methyl-l,2,4-trizole (3.34 g, 40.32 mmol) and the resultant reaction mixture was stirred at RT for 4 h. After completion of the reaction (TLC), the reaction mixture was diluted with water and extracted with EtOAc (3x). The combined EtOAc layer was washed with water and brine then dried over Na2S04 and concentrated under reduced pressure to afforded the title compound as a white solid (4.1 g, 60%): mp 125-128C; ]H NMR (400 MHz, CDC13) delta 10.05 (s, IH), 8.76 (s, IH), 8.02 (d, 2H), 7.85 (d, 2H), 2.50 (s, 3H); ESIMS m/z 188.04 ([M+H]+).

According to the analysis of related databases, 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; DOW AGROSCIENCES LLC; LO, William C.; HUNTER, James E.; WATSON, Gerald B.; PATNY, Akshay; IYER, Pravin S.; BORUWA, Joshodeep; WO2014/100163; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 584-13-4 as follows. 584-13-4

5-(4J-l,2,4-Triazol”4-ylamino)-4I-(beiizyIoxy)biphenyl-2-carbonitriIe (CAB06050)To a solution of 4/?-l,2,4-triazol-4-amine (2.439 g, 29.01 mmol) in DMSO (50 mL) was added KOtBu (336 g, 30.0 mmol). The mixture was stirred for 0.5 hours at room temperature before CAB06Theta48 (4.40 g, 14.51 mmol) was added and stirring was continued for 1 hour. The mixture was poured into crashed ice and neutralized with 2M BCHSO4 solution. The precipitate was filtered off and recrystallised from EtOAc/?-hexane to give CAB06050 (5.07 g, 85%) as fine colorless needles. Mp. 180-182 0C; 1H NMR (400 MHz, DMSO-rftf) delta 5.17 (s, 2H)5 6.47 (d, J = 2.4 Hz5 IH), 6.54 (dd, J = 8.6, 2.4 Hz, IH)5 7.15 (AA’BB’, 2H), 732-7.50 (m, 7H)5 7.78 (d, J= 8.6 Hz, IH), 8.86 (s, 2H), 10.28 (S5 IH); 13C NMR (100.6 MHz5 DMSO-rf*) delta 69.4, 101.2, 111.0, 1123, 115.0, 119.1, 127,8, 127.9, 128.5, 129.7, 130.2, 135.6, 136.8, 144.1, 146.0, 150.8, 158.9; LRMS (ES+): m/z 368,2 (100%, [M+H]+); HRMS (ES+) calcd for C22H18N5O [M+H]+: 368.1506, found 368.1494.

According to the analysis of related databases, 584-13-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; STERIX LIMITED; WOO, Lok Wai Lawrence; BUBERT, Christian; WOOD, Paul Michael; PUTEY, Aurelien; PUROHIT, Atul; POTTER, Barry Victor Lloyd; WO2011/23989; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics