Triazoles

6523-49-5,Some common heterocyclic compound, 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, molecular formula is C8H8N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of formamidine from Step 1 (151 mg) and 4-triazolylaniline(100 mg) in AcOH (5 ml) were heated to 125 for 3 h. The cooled reaction mixture was basified with 2N NaOH and the precipitate isolated by filtration and purified by column chromatography on silica gel with DCM:MeOH (2.5%) as eluant. This gave the title compound (200 mg).1H NMR delta 10.1 (IH, s), 9.3 (IH, s), 8.83 (IH, s), 8.63 (IH, s), 8.26 (IH, s), 8.19 (IH, d, J 8.85Hz), 8.07 (2H, d, J 8.85Hz), 7.92 (2H, d, J 8.85Hz), 7.85 (IH, d, J8.85Hz), 7.76 (IH, d, J 2.5Hz), 7.70 (IH, d, J 5Hz), 7.27 (IH, m); LC-MS rt 2.39 m/z369 ES-.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-(1,2,4-Triazol-1-yl)aniline, its application will become more common.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 288-88-0

EXAMPLE 108 1-phenyltriazole 1 g (0.0145 mol) triazole 2, 0.21 g (0.00145 mol) copper(I)oxide, 0.29 g (0.00145 mol) phenantroline monohydrate and 6.01 g (0.044 mol) potassium carbonate are weighed into a Schlenk flask. After repeated evacuating and flushing with argon, 10 ml dry DMF is added. Evacuating and flushing with argon are repeated several times. Subsequently, 2.42 ml (4.43 g, 0.022 mol) of iodobenzene is added. The reaction mixture is stirred for 48 h at 100 C. under argon. After cooling 20 ml DCM is added and filtered. The solvent is removed in vacuum and the product is obtained after purification by column chromatography (KG 60, gradient petroleum ether/EtOAc 8:2 to EtOAc) as a yellowish-white solid.M 145.17 C8H7N3 Yield: 1.362 g (65%)1H-NMR DM-94 (300 MHz/DMSO): (ppm)=7.41 (t, 1H, 6-H); 7.58 (t, 2H, 5/5′-H); 7.87 (d, 2H, 4-H); 8.25 (s, 1H, 1-H); 9.31 (s, 1H, 2-H)13C-NMR DM-94 (75.475 MHz/DMSO): (ppm)=119.37 (5/5′-C); 127.78 (6-C); 129.77 (4/4′-C); 136.74 (3-C); 142.27 (2-C); 152.39 (1-C)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-88-0, its application will become more common.

Reference:
Patent; TECHNISCHE UNIVERSITAET DRESDEN; US2011/105761; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 930-33-6, name is 1H-1,2,4-Triazol-3(2H)-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 930-33-6

509 g (28.28 mol) of water are added to a solution of the obtained OTA (in 98% sulfuric acid) with stirring and then 213 g (3.38 mol) of concentrated nitric acid (98% by weight commercial nitric acid) are added.After the introduction of nitric acid, the medium was brought to 65 DEG C and stirred at this temperature for 2 hoursSamples are taken to monitor the progress of the nitration (when the temperature of the reaction medium reaches 65 ). The sample is analyzed after external calibration (using commercial ONTA). The results are shown in Fig. Can be obtained at a very high yield.The following procedure was carried out for the recovery of the prepared ONTA.The reaction medium is cooled to 10 C (at the expiry of 2 hours). Subsequently, an amount of 293 g (16.28 mol) of water is added while maintaining the temperature at 10 . The crystallized ONTA is then filtered off and then pull-dried on a Buchner filter.The weight of the recovered wetted ONTA is 403 g.HPLC analysis (of the recovered ONTA) shows that after external calibration (by commercial ONTA), a yield of 96% of the wet product (for the starting ATA) can be achieved.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 930-33-6.

Reference:
Patent; Hercules; Yurenko; Herve, Gregoire; Jacob, Gi; Kanyong, Gi; Busay, Jang Marque; (13 pag.)KR2016/28405; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 7411-23-6

To a stirred solution of N,N-diisopropylethylamine (5.7 mL, 33.0 mmol), bromotripyrrolidinophosphonium hexafluorophosphate (5.14 g, 11.02 mmol) and pyridine oxide (1.05 g, 11.0 mmol) in DCM (25 mL) at r.t under nitrogen was added 3,5-dibromo-1H-1,2,4-triazole (0.08 mL, 11.02 mmol) in a single portion and the reaction stirred at 25 C overnight. The solvents were removed in-vacuo and the residue partitioned between 50 mL of DCM and 35 mL of water, passed through a phase separation cartridge and concentrated in-vacuo. The crude material was purified by column chromatography (SiO2) eluting with 10-60% EtOAc in Pet. Ether to give 2-(3,5-dibromo-1,2,4-triazol-1-yl)pyridine (1.95 g, 6.4 mmol, 58 % yield) as a white crystalline solid. Intermediate 8: UPLC-MS (ES+, Method A): 1.53 min, m/z 304.9 [M+H]+.1H NMR (400 MHz, DMSO-d6) delta 8.66 (ddd, J = 4.7, 1.9, 0.8 Hz, 1H), 8.15 (td, J = 7.8, 1.9 Hz, 1H), 7.82 (dt, J = 8.1, 1.0 Hz, 1H), 7.66 (ddd, J = 7.5, 4.9, 1.0 Hz, 1H). Structure confirmed by DEPT NMR. A second compound was isolated to give 4-(3,5-dibromo-1,2,4-triazol-1-yl)pyridine (120 mg, 0.40 mmol, 3.6% yield). Intermediate 9: UPLC-MS (ES+, Method A): 1.33 min, m/z 304.9 [M+H]+.1H NMR (400 MHz, DMSO-d6) delta 8.93-8.80 (m, 2H), 7.82-7.74 (m, 2H). Structure confirmed by DEPT NMR

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 7411-23-6.

Reference:
Patent; REDX PHARMA PLC; JONES, Clifford, D.; BUNYARD, Peter; PITT, Gary; BYRNE, Liam; PESNOT, Thomas; GUISOT, Nicolas, E.S.; (318 pag.)WO2019/145729; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, Adding a certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8.

lH-Triazole (760 mg, 11 mmol) was added to a suspension of 2,3-dichloro-5-nitro-pyridine (965 mg, 5 mmol) and anhydrous potassium carbonate (1.03 g, 7.5 mmol) in THF (50 mL), and the mixture was stirred overnight at room temperature. The mixture was diluted with EtOAc (100 mL), washed with water and brine, and the organic phase was dried over anhydrous sodium sulfate, filtered and concentrated. The residue was purified by silica chromatography (hexane: EtOAc= 5: 1 to 1: 1) to give the title compound (505 mg, 44%). 1H NMR (400 MHz, DMSO-iM): delta 9.39 (d, 1H), 9.15 (d, 1H), 8.34 (s, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; CORNELL UNIVERSITY; DANA-FARBER CANCER INSTITUTE, INC.; CHILDREN’S MEDICAL CENTER CORPORATION; MELNICK, Ari, M.; GABAS, Lorena, Fontan; US, Ilkay; CASALENA, Gabriella; GRAY, Nathanael, S.; SCOTT, David, A.; HATCHER, John; DU, Guangyan; WU, Hao; QIAO, Qi; (157 pag.)WO2018/85247; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7170-01-6, A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 2,4-difluorobenzonitrile (7.07 g, 50.8 mmol) and 3-methyl-1H-1,2,4-triazole (4.22 g, 50.8 mmol) in N,N-dimethylformamide (45 ml) was treated with powdered anhydrous potassium carbonate (10 g) and the resulting mixture was stirred at 22 C. for 18 h. The solid was then filtered and the filtrate was concentrated in vacuo. The residue was diluted with ethyl acetate, washed with water and brine, dried over anhydrous magnesium sulfate and concentrated. The mixture containing the 2 and 4-triazolyl-benzonitriles was purified by a combination of chromatography on silica gel (elution gradient of ethyl acetate in hexane) and on reversed phase silica gel to give 1.86 g (18% yield) of Intermediate 5 and 0.526 g (5% yield) of Intermediate 6. Intermediate 5 4-Fluoro-2-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile: White crystals (ethyl acetate/hexanes); mp 117-118 C. 1H NMR (400 MHz, CDCl3) delta: 8.82 (1H, s), 7.84 (1H, dd, J=5.6, 8.6 Hz), 7.62 (1H, dd, J=2.5, 9.1 Hz), 7.24 (1H, m), 2.54 (3H, s). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71. found: C, 59.25; H, 3.32; N, 27.81. Intermediate 6 4-fluoro-2-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile: White crystals (ethyl acetate-hexane); mp 120-121 C. 1H NMR (400 MHz, CDCl3) delta: 8.06 (1H, s), 7.91 (1H, dd, J=5.5, 8.6 Hz), 7.39 (1H, m), 7.30 (1H, dd, J=2.5, 8.1 Hz), 2.56 (3H, s). Anal. Calcd for C10H7FN4: C, 59.4; H, 3.49; N, 27.71. found: C, 59.35; H, 3.70; N, 27.77.

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/112190; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

16681-65-5, A common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1-Methyl-1H-1,2,3-triazole was prepared according to the literature reference W02008/98104. To a 2 L flask containing 1-methyl-1H-1,2,3-triazole (9 g, 108.3 mmol) was added THF (1500 mL) and the solution was cooled to -40 C. To this colorless homogeneous solution was added n-butyllithium (2.5 M in hexanes, 45 mL, 112.5 mmol) dropwise which immediately afforded a dark brown viscous mixture. The mixture was kept between -10 to -20 C. for 60 minutes, then a THF solution of 2,4-dimethylthiazole-5-carbaldehyde (17.2 g, 121.8 mmol in 200 mL THF) was introduced via cannula. Once the aldehyde was added the reaction was allowed to warm to room temperature. After 3 hours, the reaction was quenched by pouring it into a saturated solution of aqueous NH4Cl. The aqueous portion was extracted with EtOAc in portions, 7*400 mL. The combined organics were washed with brine, dried over MgSO4, filtered and concentrated to afford a brown oil. Chromatography on silica gel (10% acetone-DCM increasing to 50% acetone and increasing to 10% MeOH-DCM) provided the title compound as an amber solid.

The synthetic route of 16681-65-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; US2015/105404; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

4928-87-4, Name is 1,2,4-Triazole-3-carboxylic acid, 4928-87-4, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

Step D – Synthesis ((1R,3s,5S)-3-(7-amino-6-(methylsulfonyl)-3-(6-phenylpyridin-3- yl)pyrazolo[1,5-a]pyrimidin-5-yl)-8-azabicyclo[3.2.1]octan-8-yl)(1H-1,2,4-triazol-3- yl)methanoneA mixture of 1 H-1 ,2,4-triazole-3-carboxylic acid (29.4 mg, 0.26 mmol), EDCI (76.7 mg, 0.4 mmol), and 1-hydroxybenzotriazole (27 mg, 0.2 mmol) in DMF (2 mL) was stirred at room temperature for 10 min. The 5-(8-azabicyclo[3.2.1]octan-3-yl)-6- (methylsulfonyl)-3-(6-phenylpyridin-3-yl)pyrazolo[1 ,5-a]pyrimidin-7-amine HCI (0.2 mmol) was added, followed by N,N-diisopropylethylamine (0.17 mL, 1 mmol). It was stirred further for 20 min at room temperature at which time LC/MS analysis confirmed full consumption of starting material. This crude compound was purification by HPLC to afford the desired title product.

Statistics shows that 1,2,4-Triazole-3-carboxylic acid is playing an increasingly important role. we look forward to future research findings about 4928-87-4.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SCHERING CORPORATION; SIDDIQUI, M. Arshad; NAN, Yang; PATEL, Mehul, F.; REDDY, Panduranga Adulla P.; MANSOOR, Umar Faruk; MENG, Zhaoyang; VITHARANA, Lalanthi Dilrukshi; ZHAO, Lianyun; MANDAL, Amit, K.; LIU, Duan; TANG, Shuyi; MCRINER, Andrew; BELANGER, David, B.; CURRAN, Patrick, J.; DAI, Chaoyang; ANGELES, Angie, R.; YANG, Liping; DANIELS, Matthew Hersh; WO2011/90935; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common compound: 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 7343-33-1

3-Bromo-1H-1,2,4-triazole (3 g, 20.28 mmol), copper (II) acetate (7.37 g, 40.56 mmol), phenylboronic acid (4.945 g, 40.56 mmol), pyridine (3.208 mL, 40.56 mmol), and crushed and activated 4 A molecular sieves (15 g) were combined in a 1000 mL round bottom flask. The mixture was diluted with dichloromethane (300 mL), and stirred over the weekend with the cap loose at room temperature. The reaction mixture was filtered through Celite and washed with methanol (approximately 100 mL). Celite was added and the mixture was concentrated to dryness under reduced pressure and purified by silica gel chromatography (80 gram Gold column (ISCO); 0-100percent ethyl acetate/hexane). Possible regioisomer observed in 1H NMR and in LC/MS (impurity runs faster). No separation on normal phase. Combined the desired fractions and concentrated to dryness under reduced pressure. The enriched material was diluted with dimethylsulfoxide and purified by reverse phase chromatography (275 gram Gold C-18 column (ISCO); 10-100percent acetonitrile/water with trifluoroacetic acid modifier). The pure fractions were concentrated to dryness under reduced pressure to give 3-bromo-1-phenyl-1,2,4- triazole (1.72 g, 38percent). 1H NMR (400 MHz, OMSO-de) delta 9.31 (s, 1H), 7.88 – 7.76 (m, 2H), 7.65 – 7.52 (m, 2H), 7.46 (t, J = 7.4 Hz, 1H) ppm. ESI-MS m/z calc. 222.9745, found 223.97 (M+l)+; Retention time: 2.66 minutes.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7343-33-1, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; BETHIEL, Randy Scott; CAO, Jingrong; COLLIER, Philip, N.; DAVIES, Robert J.; DOYLE, Elisabeth; FRANTZ, James Daniel; GOLDMAN, Brian Anthony; GREY, Ronald Lee; GRILLOT, Anne-laure; GU, Wenxin; KOLPAK, Adrianne Lynne; KRAUSS, Paul Eduardo; LIAO, Yusheng; MAGAVI, Sanjay Shivayogi; MESSERSMITH, David; PEROLA, Emanuele; RYU, Elizabeth, Jin-Sun; SYKEN, Joshua; WANG, Jian; (491 pag.)WO2018/106646; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, A new synthetic method of this compound is introduced below., 6523-49-5

A mixture of the formamidine from step 1 (528 mg) and 4-triazolylaniline (294 mg) in AcOH (5 ml) was heated to 125 for 3 h. After cooling, the mixture was diluted and basified with IN NaOH (80 ml). The resulting cream ppt was isolated by filtration, and dried to give the title compound (495mg, 70%).1H NMR delta 10.3 (IH, br s), 9.34 (IH, s), 8.9 (IH, s), 8.67 (IH, s), 8.31 (IH, s),8.23 (IH, dd, J 8.85, 1.9Hz), 8.15 (2H, d, J 8.85Hz), 7.92 (4H, m), 7.19 (2H, d, J8.85Hz), 4.2 (2H, m), 2.72 (2H, m), 2.3 (6H, s); LC-MS rt 1.96 m/z 452 ES+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics