Triazoles

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7411-23-6 as follows. 7411-23-6

Intermediate 11 -l-(2-methylallyl)-lH-l,2,4-triazole To 3,5-dibromo-lH-l,2,4-triazole (1.5 g, 6.61 mmol) in DMF (13 mL) was added sodium tert- pentoxide (0.728 g, 6.61 mmol) and the mixture was stirred for 10 min at rt under nitrogen atmosphere. 3-Bromo-2-methylprop-l-ene (0.667 mL, 6.61 mmol) was added and the mixture was stirred at 40C for 2 hours. The mixture was poured onto water and extracted with diisopropylether (2x). The organic phase was washed with water (2x), brine and dried over sodium sulfate. The solvents were evaporated to give the title compound as a liquid (1.70 g, 91%). GCMS (CI) m/z 281 [M+]. XH NMR (400 MHz, CDCI3) delta ppm 1.74 (d, 3 H) 4.69 (s, 2 H) 4.81 – 4.86 (m, 1 H) 5.05 (dd, 1 H).

According to the analysis of related databases, 7411-23-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ACTURUM LIFE SCIENCE AB; BESIDSKI, Yevgeni; YNGVE, Ulrika; PAULSEN, Kim; LINDE, Christian; MALMBORG, Jonas; WO2014/195322; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, A common compound: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

Building block B2, L16, B23-B26: 2-(2-(bromomethyl)phenyl)-2H-1,2,3-triazole a) (2-(2H-1,2,3-triazol-2-yl)phenyl)methanol; To a mixture of (2-iodophenyl)methanol (1.50 g, 6.41 mmol), 1H-1,2,3-triazole (0.797 g, 11.54 mmol), trans-N,N’-dimethylcyclohexane-1,2-diamine (0.091 g, 0.641 mmol) and Cs2CO3 (3.76 g, 11.54 mmol) in DMF (15 mL), CuI (0.61 g, 3.20 mmol) was added and the reaction mixture was stirred for 20 min at 120 C. and 15 min at 160 C. in the microwave. The reaction mixture was cooled to rt and filtered to remove the solids. The filtrate was concentrated under reduced pressure. The residue was purified by flash-column chromatography over silicagel (eluent: gradient 10%-100% ethyl acetate/heptane) to yield the title compound (1.46 g, 64%). [1H NMR (400 MHz, DMSO-d6) delta ppm 8.10 (s, 2H), 7.74 (d, J=7.53 Hz, 1H), 7.61 (dd, J=8.03, 1.25 Hz, 1H), 7.52 (td, J=7.53, 1.25 Hz, 1H), 7.44 (m, 1H), 5.26 (t, J=5.40 Hz, 1H), 4.59 (d, J=5.02 Hz, 2H); LCMS RtA=0.68, [M+H]+=176.1].

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BADIGER, Sangamesh; BEHNKE, Dirk; BETSCHART, Claudia; COTESTA, Simona; HINTERMANN, Samuel; OFNER, Silvio; PANDIT, Chetan; ROY, Bernard Lucien; US2012/101110; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4928-87-4, 4928-87-4

A mixture of lH-l,2,4-triazole-3-carboxylic acid (22.6 mg, 0.2 mmol), EDCI (76.7 mg, 0.4 mmol), and 1-hydroxybenzotriazole (27 mg, 0.2 mmol) in DMF (2 mL) was stirred at room temperature for lOmin. Crude 2-(5-(5-((lR,3s,5S)-8-azabicyclo[3.2.1]octan-3-yl)-8H- pyrazolo[l ,5-a]pyrrolo[3,2-e]pyrimidin-3-yl)pyridin-2-yl)propan-2-ol from step 6 (0.25 mmol) was added followed by N,N-diisopropylethylamine (0.18 mL, 1 mmol). It was stirred further for 20 minutes at room temperature at which time LC/MS analysis confirmed full consumption of starting material. Pure compound ((lR,3s,5S)-3-(3-(6-(2-hydroxypropan-2- yl)pyridin-3-yl)-8H-pyrazolo[l,5-a]pyrrolo[3,2-e]pyrimidin-5-yl)-8-azabicyclo[3.2.1]octan-8- yl)(lH-l ,2,4-triazol-3-yl)methanone was isolated by preparative HPLC.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,2,4-Triazole-3-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MENG, Zhaoyang; PATEL, Mehul, F.; SIDDIQUI, M. Arshad; REDDY, Panduranga Adulla, P.; NAN, Yang; WO2013/16164; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-36-8, name is 1H-1,2,3-Triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

Synthesis of 5-methyl-2-(2H-l,2,3-triazol-2-yl)benzoyl chloride 14 15 16To a solution of 2-iodo-5-methylbenzoic acid (14, 4.00 g, 15.3 mmol) in DMF (10 mL) was added 1,2,3-triazole (2.10 g, 30.5 mmol), cesium carbonate (9.95 g, 30.5 mmol), copper(I) iodide (0.145 g, 0.76 mmol) and trans -N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with 1 NHC1 and extracted with EtOAc. The organic layer was dried over sodium sulfate, filtered and concentrated in vacuo. The resultant residue was purified by silica gel chromatography (MeOH:DCM with 0.1% AcOH = 0: 1 to 1 :9) to give the faster eluting 2- (2H-l ,2,3-triazol-2-yl)-5-methylbenzoic acid (15), followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid (16).

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; DI MARCO, Christina; WO2013/59163; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common compound: 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 7411-23-6

1-(2-chloroethyl)piperidine hydrochloride (243 mg, 1.32 mmol), 3,5-dibromo-1H-1,2,4-triazole (250 mg, 1.1 mmol) and potassium carbonate (640 mg, 4.6 mmol) were added to DMF (5 mL) in a 25 mL round bottom flask. The reaction was then stirred for 18 h at 50 C under nitrogen. The solvent was removed in vacuo, water was added, and the product extracted with DCM (3 times). The organic phase was dried over a phase separator and the solvent removed in vacuo. The product was purified by silica column chromatography eluting with 0-10% MeOH in DCM to give [1-[2-(3,5-dibromo-1,2,4-triazol-1-yl)ethyl]piperidine (224 mg, 0.66 mmol, 60% yield)] as a yellow oil. UPLC-MS (ES+, Method A), 0.87 min, m/z 339.0 [M+H]+

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7411-23-6, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; REDX PHARMA PLC; JONES, Clifford, D.; BUNYARD, Peter; PITT, Gary; BYRNE, Liam; PESNOT, Thomas; GUISOT, Nicolas, E.S.; (318 pag.)WO2019/145729; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 7411-23-6

NaH (60% dispersion in mineral oil; 5.29 g, 132 mmol) was added to a stirred solution of 3,5-dibromotriazole (20.0 g, 88.2 mmol) in DMF under an atmosphere of N2 at r.t. After 30 min, 2-iodopropane (10.6 ml, 106 mmol) was slowly added and the r.m. was heated at 40 C. for 2-3 h. The content was carefully poured onto ice/H2O (1 l), and the mixture was extracted with DIPE. The combined organic extracts were washed with H2O (4¡Á200 ml), then with brine and dried (Na2SO4). Filtration and concentration under reduced pressure yielded a yellow oil. Yield: 16.50 g of intermediate 24 (70%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 7411-23-6, its application will become more common.

Reference:
Patent; Van Brandt, Sven Franciscus Anna; De Cleyn, Michel Anna Jozef; Gijsen, Henricus Jacobus Maria; Berthelot, Didier Jean-Claude; Surkyn, Michel; US2012/295891; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below.

Intermediate H 4-Fluoro-2-(2H-l,2,3-triazol-2-yl)benzoic acid Intermediate H To a mixture of 2-bromo-4-fluorobenzoic acid (30 g, 137 mmol), cesium carbonate (89.26 g, 274 mmol) and Cul (5.27 g, 27.4 mmol) in DMF (200 mL) were added NN’- dimethylcyclohexane-l,2-diamine (3.7 mL,23.3 mmol) and lH-l,2,3-triazole (18.92 g, 274 mmol). The resulting mixture was stirred at 110 C overnight, cooled, concentrated in vacuo and diluted with water (150 mL). The aqueous mixture was extracted with EtOAc (300 mL x 3). The aqueous layer was acidified with 2Nu HC1 and extracted with EtOAc (300 mL x 4). The combined organic layers were washed with brine (150 mL x 3), dried over Na2SC>4, filtered and the filtrate was concentrated in vacuo. The residue was purified by chromatography on silica gel (petroleum ether : EtOAc = 100: 1 ~ 5 : 1) to provide the title compound. LRMS m/z (M+H) 208.0 found, 208.0 required.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KIM, Ronald; KUDUK, Scott, D.; LIVERTON, Nigel; ZHUO, Gang; (116 pag.)WO2016/100161; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 6086-21-1, name is 1-Methyl-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 6086-21-1

Example 133.; Preparation of 8-(1-ethyl-propyl)-3-[3-methoxy-5-(2-methyl-2H-[1,2,4]triazol-3-yl)- thiophen-2-yl]-2,6-dimethyl-imidazo[1,2-b]pyridazine.; A. 5-Bromo-1-methyl-1H-[1,2,4]triazole.; EPO To a -78 C solution of l-methyl-1H-[1,2,4]triazole (1.0 mL, 13.20 mmol) and TEtaF (100 mL) is added 1.6 M n-BuLi (8.70 mL, 13.86 mmol). After 45 minutes 1,2- dibromo-l,1,2,2-tetrafluoro-ethane (1.76 mL, 14.52 mmol) is added, the solution is warmed to ambient temperature and stirred for 2 hours. The solution is diluted with EtOAc (200 mL), washed with water (150 mL), brine (150 mL), dried over MgSO4, filtered and concentrated to furnish the title compound (1.37 g, 8.46 mmol, 64%). 1H NMR (CDCl3) delta 3.82 (s, 3H), 7.78 (s, 1H). LC/MS (m/z): calcd. for C3H4BrN3 (M+H)+: 162.0; found: 161.9.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6086-21-1.

Reference:
Patent; ELI LILLY AND COMPANY; WO2006/102194; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below., 288-36-8

Sodium hydride (5.3 g, 220.85 mmol, 1.50 equiv) was added in portions to a stirred mixture of1H-1,2,3-triazole (10 g, 144.79 mmol, 1.00 equiv) in THF (500 mL) at 0 C under nitrogen. After1 hour 2-(trimethylsilyl)ethoxymethyl chloride (36 g, 235.76 mmol, 1.60 equiv) was added and theresulting solution was stirred for 12 h at room temperature. The reaction was quenched by water, extracted with ethyl acetate, dried over anhydrous sodium sulfate, and concentrated under vacuum. The residue was applied onto a silica gel column with ethyl acetate/petroleum ether (1:10). This resulted in 10 g (28%) of the title compound as yellow oil. LC-MS (ES, mlz): 200 [M+H].

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; BLAQUIERE, Nicole; BURCH, Jason; CASTANEDO, Georgette; FENG, Jianwen A.; HU, Baihua; STABEN, Steven; WU, Guosheng; YUEN, Po-wai; WO2015/25025; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 288-36-8 name is 1H-1,2,3-Triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 288-36-8

Compound 1a was prepared by adapting a procedure described. 8 A mixture of Cu2O (0.12 g, 0.80 mmol), 1,2,3-triazole (0.48 mL, 8.0 mmol), 1,10-phenanthroline (0.29 g, 1.6 mmol), iodobenzene (1.1 mL, 9.6 mmol) and tetramethylammonium fluoride (2.2 g, 24 mmol) was heated under argon at 120 C for 48 h. CH2Cl2 (10 mL) was added to the residue. After filtration over celite, the organic phase was washed with brine (2 * 5 mL) and the solvent was evaporated. The crude product was purified by chromatography over silica gel (eluent: CH2Cl2/heptane 1:1 to CH2Cl2/AcOEt 1:1) to afford the pure compound in 47% yield as an orange powder: mp 58 C; 1H NMR (CDCl3, 300 MHz) 7.42-7.49 (m, 1H), 7.51-7.58 (m, 2H), 7.74-7.78 (m, 2H), 7.88 (br s, 1H), 8.03 (d, 1H, J = 0.9 Hz). The 1H NMR data are in accordance with those previously described. 27 13C NMR (CDCl3, 75 MHz) 120.8 (2CH), 121.9 (CH), 129.0 (CH), 129.9 (2CH), 134.6 (CH), 137.2 (C).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-1,2,3-Triazole, and friends who are interested can also refer to it.

Reference:
Article; Nagaradja, Elisabeth; Bentabed-Ababsa, Ghenia; Scalabrini, Mathieu; Chevallier, Floris; Philippot, Stephanie; Fontanay, Stephane; Duval, Raphael E.; Halauko, Yury S.; Ivashkevich, Oleg A.; Matulis, Vadim E.; Roisnel, Thierry; Mongin, Florence; Bioorganic and Medicinal Chemistry; vol. 23; 19; (2015); p. 6355 – 6363;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics