Triazoles

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-36-8, name is 1H-1,2,3-Triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

To a mixture of (2-iodophenyl)methanol [5159-41-1] (1.50 g, 6.41 mmol), 1 H-1 ,2,3-triazole (0.797 g, 11.54 mmol), trans-N, N’-dimethylcyclohexane-l ^-diamine [68737-65-5] (0.091 g, 0.641 mmol) and Cs2C03 (3.76 g, 1 1.54 mmol) in DMF (15 mL), Cul (0.61 g, 3.20 mmol) was added and the reaction mixture was stirred for 20 min at 120C and 15 min at 160C in the microwave. The reaction mixture was cooled to rt and filtered to remove the solids. The filtrate was concentrated under reduced pressure. The residue was purified by flash-column chromatography over silicagel (eluent: gradient 10%-100% ethyl acetate/heptane) to yield the title compound (1.46 g, 64%). [1H NMR (400 MHz, DMSO-cfe) USD ppm 8.10 (s, 2 H), 7.74 (d, J=7.53 Hz, 1 H), 7.61 (dd, J=8.03, 1.25 Hz, 1 H), 7.52 (td, J=7.53, 1.25 Hz, 1 H), 7.44 (m, 1 H), 5.26 (t, J=5.40 Hz, 1 H), 4.59 (d, J=5.02 Hz, 2 H); LCMS RtA = 0.68, [M+H]+ = 176.1].

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; BADIGER, Sangamesh; BEHNKE, Dirk; BETSCHART, Claudia; CHAUDHARI, Vinod; COTESTA, Simona; HINRICHS, Juergen Hans-Hermann; OFNER, Silvio; PANDIT, Chetan; WAGNER, Juergen; WO2011/76747; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-88-0, name is 1H-1,2,4-Triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 288-88-0

General procedure: A mixture of 4-fluoro acetophenone/4-fluorobenzaldehyde (10 mmol) and imidazole/triazole (10 mmol) were dissolved in dry DMF (20 mL). K2CO3 (12 mmol) was added in small portion within a period of 15 min to the above stirred solution. Mixture was stirred for 10-12 h at 110 C. Heating discontinued, K2CO3 was filtered off, filtrate extracted with ethyl acetate (3 ¡Á 15 mL). Organic layer was washed with water (3 ¡Á 15 mL), dried over anhydrous sodium sulphate and concentrated to given an oil which was purified on silica gel column (60-120 mesh) taking methanol: chloroform (1:99) as an eluent.

Statistics shows that 288-88-0 is playing an increasingly important role. we look forward to future research findings about 1H-1,2,4-Triazole.

Reference:
Article; Marrapu, Vijay K.; Chaturvedi, Vinita; Singh, Shubhra; Singh, Shyam; Sinha, Sudhir; Bhandari, Kalpana; European Journal of Medicinal Chemistry; vol. 46; 9; (2011); p. 4302 – 4310;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 7170-01-6

For the preparation of [Zn(atz)2]¡¤guest (MAF-66), 73 mg of 3-amino-1,2,4-triazole (atz) was dissolved in 50 mL of isopropylalcohol and 40 mg of Zn(OH)2 was dissolved in 50 mL of a 25% aqueous ammonia solution. The solutions were mixed together and stirred for several minutes. The final solution was left at room temperature for 3 d to evaporate slowly. The obtained colorless crystals were centrifuged and washed three times with water and isopropyl alcohol, and then air-dried. Elem. Anal. Calcd. (%) for C7H15.2N8O1.6Zn ([Zn(atz)2]¡¤0.6H2O¡¤1.0C3H8O): C, 27.80; H, 5.07;N, 37.05; Zn, 21.62. Found: C, 27.83; H, 4.86; N, 37.02; Zn, 22.77.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 7170-01-6.

Reference:
Article; Kim, Han-Ung; Babu, Robin; Roshan, Roshith; Park, Dae-Won; Applied Catalysis A: General; vol. 538; (2017); p. 59 – 65;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8. 288-36-8

To a stirred solution of EE-1 (10 g, 144.79 mmol) in water (100 mL) is added EE-2 (13.73 g, 173.75 mmol) dropwise at 0 C and the reaction mixture is stirred at 0 C for 7 hours. The reaction mixture is filtered and extracted with diethyl ether. The combined organics are concentrated in vacuo to yield EE-3.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1H-1,2,3-Triazole.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; HUGHES, Robert Owen; LI, Xiang; NEMOTO, Peter Allen; SMITH KEENAN, Lana Louise; WU, Lifen; XIONG, Zhaoming; (65 pag.)WO2018/111803; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 956317-36-5

A round bottom flask equipped with magnetic stirrer bar was charged with 5-methyl-2- (2H-1,2,3-triazole-2-yl)benzoic acid (2.0 g, 9.4 mmol, 1 equiv), CH2C12 (94 mL) and hexafluoro isopropanol (1.57 g, 9.4 mmol, 1.0 equiv). After addition of EDC hydrochloride (1.79 g, 9.4 mmol, 1.0 equiv) and DMAP (0.23 g, 1.87 mmol, 0.2 equiv), the reaction mixture was stirred at ambient temperature for 1 h. The solvent was evaporated underreduced pressure followed by purification of the crude product by column chromatography (Si02, cyclohexane /ethyl acetate 50:1). 1,1,1,3,3,3 -hexafluoropropan-2-yl 5 -methyl-2-(2H-1 ,2,3-triazole-2-yl)benzoate (2.5 g, 75%) was obtained as a yellowish oil, which solidifies at 2 C to 4 C.?H NMR (500 MHz, d6-DMSO) oe = 8.08 (s, 2H), 7.81 (d, J = 8.25 Hz, 1H), 7.70 – 7.65 (m, 1H), 7.64 – 7.61 (m, 1H), 6.99 (sept, J = 6.28 Hz, 1H), 2.46 (s, 3H)?3C NMR (125 MHz, CDC13) oe = 163.8, 139.8, 137.2, 135.8, 134.8, 130.5, 134.6, 123.3,120.9 (q, J = 238.3 Hz, (CF3)2), 67.1 (sept, J = 33.5 Hz, OCH(CF3)2), 20.8

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 956317-36-5.

Reference:
Patent; SANDOZ AG; HOeFERL-PRANTZ, Kathrin; BARTH, Roland; RICHTER, Frank; ZUPANCIC, Borut; (126 pag.)WO2016/20403; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8. 288-36-8

Step A: A solution of lH-l,2,3-triazole (1.0 g, 14.5 mmol), methyl iodide (3.1 g, 21.7 mmol) and K2CO3 (4.0 g, 28.9 mmol) in THF (15 mL) was stirred at room temperature for 3 hours. EtOAc (20 mL) and H20 (10 mL) were added, separated. The solvent was concentrated under vacuum. The crude residue was purified by silica gel chromatography eluting with 10% MeOH/DCM to afford l-methyl-lH-l,2,3-triazole (860 mg, 10.4 mmol, 71% yield) as yellow oil.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1H-1,2,3-Triazole.

Reference:
Patent; GENENTECH, INC.; F. HOFFMANN-LA ROCHE AG; YUK, Inn H.; PURKEY, Hans; O’BRIEN, Thomas; WO2015/142903; (2015); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below.

To a solution of 2-iodobenzoic acid (3.0 g, 12.1 mmol) in DMF was added 1,2,3- triazole (1.5 g, 21.7 mmol), Cs2C03(7.1 g, 21.7 mmol), Cul (114 mg, 0.6 mmol), and trans-N,K- dimethylc)rclohexane-l,2-diamine (310 mg, 2.2 mmol). After heating at 120 C for 10 min in a microwave reactor, the mixture was cooled to room temperature, diluted with EtOAc, and filtered through Celite. The filtrate was concentrated in vacuo and the crude residue was purified by silica gel chromatography (MeOH in DCM with 0.1% AcOH) to give Intermediate H as the faster eluting isomer. 1H NMR (DMSO-d6 , 500MHz) delta 13.05 (brs, 1 H), 8.12 (s, 2H), 7.81-7.52 (m, 4H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; REGER, Thomas, S.; SKUDLAREK, Jason, W.; (0 pag.)WO2016/85784; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-36-8 as follows.

A solution of lH-l ,2,3-triazole (1.0 g, 14.5 mmol), methyl iodide (3.1 g, 21.7 mmol) and K2C03 (4.0 g, 28.9 mmol) in THF (15 mL) was stirred at room temperature for 3 hours. EtOAc (20 mL) and H20 (10 mL) were added, separated. The solvent was concentrated under vacuum. The crude residue was purified by silica gel chromatography eluting with 10% MeOH/DCM to afford 1 -methyl- lH-l ,2,3-triazole (860 mg, 10.4 mmol, 71 % yield) as yellow oil.

According to the analysis of related databases, 1H-1,2,3-Triazole, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; CHEN, Jinhua; DING, Charles Z.; DRAGOVICH, Peter; FAUBER, Benjamin; GAO, Zhenting; LABADIE, Sharada; LAI, Kwong Wah; PURKEY, Hans Edward; ROBARGE, Kirk; WEI, Binqing; ZHOU, Aihe; WO2015/140133; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 4928-87-4 as follows. 4928-87-4

Single crystals of 1 were prepared by a branched tube method [34], 1H-1,2,4-triazole-3-carboxylic acid (0.117 g, 1 mmol), lead(II) nitrate (0.331 g, 1 mmol) and potassium bromide (0.119 g, 1 mmol) were placed in the bottom main of a branched tube. Water was carefully added to fill both arms, and then the arm to be heated was placed in oil bath at 60 C. After 7 days, colorless crystals were deposited in the cooler arm which were filtered off, washed with water and air dried. (0.225 g, yield 54%),

According to the analysis of related databases, 4928-87-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Safarifard, Vahid; Morsali, Ali; Inorganica Chimica Acta; vol. 405; (2013); p. 203 – 208;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 3,5-Dibromo-1,2,4-triazole (1; 658 mg, 2.9 mmol) or 3-chloro-1,2,4-triazole (300 mg, 2.9 mmol), o-quinone methide precursor 2 (2.9mmol), and K2CO3 (1.2 g, 8.7 mmol) were refluxed for 4 h in DMF (10mL). After completion of the reaction, the mixture was cooled, andpoured into H2O (30 mL). The precipitate formed was collected by filtration,washed with H2O, dried, and recrystallized.

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Osipov, Dmitry V.; Osyanin, Vitaly A.; Voskressensky, Leonid G.; Klimochkin, Yuri N.; Synthesis; vol. 49; 10; (2017); p. 2286 – 2296;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics