Triazoles

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., 7411-23-6

a. Potassium carbonate, 16.6 g (0.12 mol), was added to a solution of 25.0 g (0.11 mol) of triazole 1 in 400 mL of acetone. The suspension was stirred for15 min at 20 C, 12.7 g (0.10 mol) of benzyl chloride was added, and the mixture was refluxed for 8 h with stirring. The solvent was distilled off, and the light yellow oily residue was treated with 200 mL of water.The mixture was stirred for 5 min, and crystals precipitated and were filtered off and recrystallized from hexane. Yield 22.3 g (64 %).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Tolstyakov; Russian Journal of Organic Chemistry; vol. 54; 10; (2018); p. 1537 – 1547; Zh. Org. Khim.; vol. 54; 10; (2018); p. 1525 – 1534,10;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 288-36-8 name is 1H-1,2,3-Triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 288-36-8

But-3-yn-1-ol (49.57 g, 707.2 mmol) and triethylamine (107.7 mL, 777 mmol, dried over KOH) were dissolved in dry dichloromethane (500 mL) under a nitrogen atmosphere and cooled to 0 C. Methanesulfonyl chloride (54.8 mL, 708 mmol), dissolved in 500 mL of dry dichloromethane was added within 90 minutes while keeping the temperature below 5 C. The mixture was stirred for 3.5 hours at room temperature, then poured onto 2.5 L of ice water. The organic phase was separated and washed with 2¡Á500 mL of water and 1¡Á250 mL of brine and dried over sodium sulfate. The volatiles were removed to yield 94.18 g of the methane sulfonate (631.2 mmol, 89.2%) as a yellow liquid. A suspension of NaOH (37.86 g, 946.5 mmol), sodium iodide (94.65 g, 631.5 mmol) and 1H-[1,2,3]Triazole (61.03 g, 883.6 mmol) in 2-methyl-2-butanol (750 mL) was refluxed for 1 h under an inert atmosphere. After cooling to room temperature the methane sulfonate (94.18 g, 631.2 mmol) was added within 5 minutes. The resulting suspension was then heated to reflux for 3 hours, cooled to room temperature and concentrated on a rotary evaporator at 45 C. Water (500 mL) and dichloromethane (1 L) were added and the organic phase was separated, dried over sodium sulfate and the volatiles removed at 30 C. The residue was distilled at 1.5 mbar. A forerun was collected at 20-70 C. The main fraction distilled at 123-129 C. as a colorless, turbid liquid. After filtration over Celite (a pad of diatomite) 1-But-3-ynyl-1H-[1,2,3]triazole was obtained as a colorless liquid (29.8 g, 40%). The content according to GC/FID was >98%. -H-NMR (CDCl3) delta=2.05 (t, 1H, C?CH), 2.75 (dt, 2H, CH2-C?CH), 4.5 (t, 2H, CH2-triazole), 7.65 (s, 1H, triazole), 7.70 (s, 1H, triazole).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-1,2,3-Triazole, and friends who are interested can also refer to it.

Reference:
Patent; Bossenmaier, Birgit; Friebe, Walter-Gunar; Friess, Thomas; Kling, Lothar; Rueth, Matthias; Voss, Edgar; US2005/203064; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 7411-23-6 name is 3,5-Dibromo-1H-1,2,4-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Sodium hydride (34 mg, 0.86 mmol) was slowly added to a solution of 3,5-dibromo-1H-1,2,4-triazole (150 mg, 0.66 mmol) and DMF (3.9 mL) at RT and the solution was stirred at 45C for 30 min. tert-butyl 4-methylsulfonyloxypiperidine-1-carboxylate (0.15 mL, 0.79 mmol) was then added portion-wise. The reaction mixture was stirred at 85 C for 2 days. The reaction was quenched with NH4Cl (aq. sat.) and extracted with DCM. The combined organic fractions were dried via a phase separator and reduced in vacuo. The crude residue was dissolved in DCM, reduced in vacuo onto silica and purified by silica flash chromatography eluting with 10-90% EtOAc in Pet. Ether to yield tert-butyl 4-(3,5-dibromo-1,2,4-triazol-1-yl)piperidine-1-carboxylate (140 mg, 0.34 mmol, 52% yield) as a pale yellow oil. UPLC-MS (ES+, Method A): 1.82 min, m/z 411.0 [M+H]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,5-Dibromo-1H-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Patent; REDX PHARMA PLC; JONES, Clifford, D.; BUNYARD, Peter; PITT, Gary; BYRNE, Liam; PESNOT, Thomas; GUISOT, Nicolas, E.S.; (318 pag.)WO2019/145729; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 7170-01-6.

5-Methyl-1-(4-nitrophenyl)-1H-1,2,4-triazoleGeneral procedure C: Preparation of 3- or 5-substituted-1-(4-nitrophenyl)-1H-1,2,4- triazole.[0115] A mixture of 4-fluoro-l -nitrobenzene (0.28 g, 2.0 mmol), 3-methyl-1H-1,2,4-triazole (0.18 g, 2.2 mmol), K2CO3 (0.55 g, 4.0 mmol) and DMF (2 mL) was heated at 70 C overnight. The reaction mixture was cooled down to room temperature, diluted with water, extracted with EtOAc (3x). The organic solution was dried over anhydrous MgSO4 and concentrated in vacuo to provide a solid. Purification of this material by column chromatography on silica gel (40% EtOAc / hexane) provided 3-methyl-1-(4-nitrophenyl)- 1H-1,2,4-triazole as the major product. 1H NMR (CDCl3, 400 MHz) delta 8.59 (s, 1H), 8.39 (d, 2H), 7.88 (d, 2H), 2.53 (s, 3H). Further elution with 65% EtOAc / hexane provided 5-methyl- l-(4-nitrophenyl)-1H-1,2,4-triazole as the minor product. 1H NMR (CDCl3, 400 MHz) delta 8.34 (d, 2H), 7.93 (s, 1H), 7.66 (d, 2H), 2.59 (s, 3H).

The synthetic route of 3-Methyl-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THE SCRIPPS RESEARCH INSTITUTE; WO2009/32861; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

4928-87-4, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, A new synthetic method of this compound is introduced below.

General procedure: The tail group amines Ar-NH2 (Ar a-d) (19.5 mmol,1.1 equiv) were added to a stirring solution of 1,2,4-triazole-3-carboxylic acid 12 (2.00 g, 17.7 mmol, 1.0 equiv) in dry DMF(30 mL) at room temperature. After 5 min, TBTU (6.0 g, 18.6 mmol,1.0 equiv) and DIPEA (11.0 mL, 61.9 mmol, 3.5 equiv) were added insequence. The resulting solution was stirred at room temperaturefor 16 h. After completion of the reaction, as indicated by TLC, DMFwas removed by rotary evaporation at 30 torr and 70 C. The crudematerial was purified by methods described in each individualentry.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Chakraborty, Amarraj; Dou, Yali; Gibbons, Garrett S.; Grigsby, Sierrah M.; Lee, Young-Tae; Liao, Chenzhong; Mathew, Bini; Moukha-Chafiq, Omar; Nikolovska-Coleska, Zaneta; Pathak, Vibha; Reynolds, Robert C.; Schuerer, Stephan C.; Snowden, Timothy S.; Umeano, Afoma C.; European Journal of Medicinal Chemistry; vol. 189; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8. 288-36-8

The molar ratio of 9,10-dibromoanthracene: 1H-1,2,4-triazole: potassium carbonate: copper oxide is 2: 10-15: 30: 1In the magnet,A 50 mL three-necked round bottom flask equipped with a reflux condenser and a thermometer was charged with CuO (0.0398 mg, 0.5 mmol)Potassium carbonate (2.0731 g, 15 mmol),Triazole (0.345 mg, 5 mmol),9,10-dibromoanthracene (0.3360 g, 1 mmol),20 mL DMF.Start stirring at 100 oC,Reaction for 24 hours.After the reaction,The reaction solution was cooled to room temperature,filter,The filtrate was added to 100 mL of water,Precipitation precipitation,Suction filtration, collecting filter cake,Yield 60%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1H-1,2,3-Triazole.

Reference:
Patent; Tianjin Normal University; Wang Zhongliang; Guo Changcheng; Shang Yuntao; Zhang Zhigang; Yang Xi; Wang Ying; (10 pag.)CN106317119; (2017); A;; ; Patent; Tianjin Normal University; Wang Zhongliang; Yang Xi; Guo Changcheng; Shang Yuntao; Zhang Zhigang; Wang Ying; (11 pag.)CN106317121; (2017); A;; ; Patent; Tianjin Normal University; Wang Zhongliang; Yang Xi; Guo Changcheng; Shang Yuntao; Zhang Zhigang; Wang Ying; (11 pag.)CN106317120; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 288-36-8 name is 1H-1,2,3-Triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 288-36-8

A mixture of 2,3-difluorobenzonitrile (4.0 g, 28.8 mmol), 2H-1 ,2,3-triazole (1 .9 g, 28.8 mmol) in DMF (85.0 mL) and K2CO3 (7.9 g, 57.5 mmol) were heated to 125 C for 1 .5 h. After cooling to rt, water was added and the mixture extracted with EtOAc (2 X). The combined organics were washed with brine and dried (Na2SO4). Purification via FCC (10-100% EtOAc in hexanes) gave two products. 3-Fluoro-2-(2H-1 ,2,3-triazol-2- yl)benzonitrile (1 .6 g, 29%), 1H NMR (CDCI3): 7.99 (s, J = 6.6 Hz, 2H), 7.67 – 7.63 (m, 1 H), 7.61 – 7.53 (m, 2H), 7.26 (s, 6 H) and 3-fluoro-2-(1 H-1 ,2,3-triazol- 1 -yl)benzonitrile (2.0 g, 38%) 1H NMR (CDCI3): 7.97 (dd, J = 4.4, 2.8 Hz, 1 H), 7.95 (d, J = 1 .2 Hz, 1 H), 7.70 (tt, J = 5.7, 2.8 Hz, 1 H), 7.65 (td, J = 8.1 , 4.9 Hz, 1 H), 7.62 – 7.57 (m, 1 H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-1,2,3-Triazole, and friends who are interested can also refer to it.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; BRANSTETTER, Bryan, James; LETAVIC, Michael, A.; LY, Kiev, S.; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; WO2011/50200; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

3641-08-5,Some common heterocyclic compound, 3641-08-5, name is 2H-1,2,4-Triazole-3-carboxamide, molecular formula is C3H4N4O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Potassium tert- pentoxide (1.7 M in toluene, 430 mI_, 0.73 mmol) was added to a stirring solution of 1 /-/-1 ,2,4-triazole-3-carboxamide (89.88 mg, 0.802 mmol) in DMF (2.5 ml_) at room temperature. The mixture was heated to 60C for 15 minutes followed by addition of 2-methylenequinuclidin-3-one (100 mg, 0.729 mmol). The reaction mixture was stirred at 60C for 1 hour and then cooled in an ice/water bath and the reaction was quenched with 4M HCI in dioxane (182 mI_, 0.73 mmol). The solvent was removed in vacuo and the residue was purified by preparative HPLC (XBridge C18 19x50mm; 50 mM NH4HC03/MeCN; 99:1 to 9:1 ) to give the title compound (105 mg, 58%). MS ESI+ (m/z): 250 [M+H]+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2H-1,2,4-Triazole-3-carboxamide, its application will become more common.

Reference:
Patent; APREA THERAPEUTICS AB; HAGBERG, Lars; RINGOM, Rune; BLIZZARD, Tim; (0 pag.)WO2020/58458; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

6523-49-5, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, A new synthetic method of this compound is introduced below.

To a solution of Intermediate 18 (60mg, 0.18mmol) in acetic acid (ImI) was added 4- triazolylaniline (35mg, 0.22mmol) and the solution was stirred at 8O0C over 2 hours. LCMS analysis showed consumption of starting material. Reaction mixture was cooled and the excess acetic acid removed by evaporation under reduced pressure. The residues were treated with sat. aq. Sodium hydrogen carbonate until cessation of effervescence. The resulting precipitate was filtered and the solids obtained dried under vacuum. Purification by preparative chromatography furnished the desired compound as an off- white solid (18mg, 22%)1H NMR (D6-DMSO) 10.21 (IH, bs), 9.07 (IH, s), 8.57 (IH, s), 8.42 (IH, s), 8.04 (IH, s), 8.00 (IH, dd, J 8.75Hz, 1.5Hz), 7.90 (2H, d, J 9Hz), 7.72 (IH, s), 7.68 (2H, d, J 3.25Hz), 7.27 (2H, s), 6.96 (IH, d, J 9Hz), 4.53 (IH, quin, J 6Hz), 3.64 (3H, s), 1.12 (6H, d, J 6.25Hz) LC-MS rt 2.48 m/z 454 ES+

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7343-34-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7343-34-2 as follows.

In a 25 mL round-bottomed flask under N2 at 0 ¡ãC, sodium hydride (60percent in mineral oil, 0.059 g, 1.48 mmol) was added to a solution of 3,5-dimethyl-lH-l,2,4-triazole (0.112 g, 1.15 mmol) in DMF (5 mL) and the mixture was stirred for 30 min. To this mixture was then added 5-bromo-4′-(bromomethyl)-[l, r-biphenyl]-2-carbonitrile (1-002, 0.407 g, 1.16 mmol) and the mixture was stirred at RT for 3.5 h. The resulting mixture was then poured into H20 and the product was extracted with EtOAc (x3). The combined organic extract was washed with 0 (x3) and brine, dried over anhydrous sodium sulfate and concentrated to dryness. The residue was purified on ISCO using a 40 g column (0-5percent MeOH-DCM) to afford the title compound (0.248 mg, 0.675 mmol, 59percent yield) as a colorless gum. LC (Method B): 1.795 min. MS (APCI): calcd for Ci8H16BrN4 [M + H]+ m/z 367.1, found 367.0. H NMR (400 MHz, CDC13) delta ppm 7.66 (dd, J = 0.78, 1.57 Hz, 1H), 7.61 – 7.63 (m, 2H), 7.51 – 7.56 (m, 2H), 7.28 – 7.31 (m, 2H), 5.29 (s, 2H), 2.42 (s, 3H), 2.38 (s, 3H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 7343-34-2, and friends who are interested can also refer to it.

Reference:
Patent; UNIVERSITE DE MONTREAL; BRISTOL-MYERS SQUIBB COMPANY; PRIESTLEY, Eldon, Scott; REZNIK, Samuel, Kaye; RUEDIGER, Edward, H.; GILLARD, James, R.; HALPERN, Oz, Scott; JIANG, Wen; RICHTER, Jeremy; RUEL, Rejean; TRIPATHY, Sasmita; YANG, Wu; ZHANG, Xiaojun; (642 pag.)WO2018/5591; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics