Triazoles

A common heterocyclic compound, 217448-86-7, name is Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, molecular formula is C11H9F2N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 217448-86-7.

ExampIe-4: Preparation of l-(2, 6-difIuorobenzyl)-lH-l, 2, 3-triazole-4- carboxylic acid[0029] A mixture of Methyl l -(2, 6-difluorobenzyl)-l H- l, 2, 3-triazole-4- carboxylate. (50 gms) and a solution of sodium hydroxide ( 1 1.76 gms in 100ml water) were stirred at room temperature contents till it becomes clear. Hydrochloric acid (30ml) in DM water (70 ml) was charged to above reaction mass. Adjusted the PH of the reaction till 2-3 by adding the hydrochloric acid solution at 25-30C. After the completion, reaction mass was filtered and dried the material at 65C-70C for 15 hours. Yield: 40gms Example

The synthetic route of Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DAVULURI, Ramamohan Rao; WO2012/25936; (2012); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

584-13-4, The chemical industry reduces the impact on the environment during synthesis 584-13-4, name is 4H-1,2,4-Triazol-4-amine, I believe this compound will play a more active role in future production and life.

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

The chemical industry reduces the impact on the environment during synthesis 4H-1,2,4-Triazol-4-amine. I believe this compound will play a more active role in future production and life.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 16681-65-5

Compound 6. To a solution of compound 4 (5 g, 60 mmol, 1 eq.) in THF (120 mL) was added LDA (2M in THF, 45 mL, 1.5 eq.) dropwise at -78 C under N2. After the mixture was stirred at -78 C for 1 h, compound 5 (6.33 g, 90.3 mmol, 6.7 mL, 1.5eq.) was added dropwise at -78 C. The mixture was stirred at -78 C for additional 2 h under N2. The reaction mixture was then poured into ice sat. NH4Cl (100 mL) and extracted with DCM (150 mL x 5). The combined organics were washed with brine (200 mL), dried over Na2SO4, filtered, concentrated, and purified by column chromatography (SiO2, petroleum ether/ethyl acetate (1:1 to 0:1)) to afford compound 6 as a yellow solid. 1H-NMR (CDCl3, 400 MHz) delta 7.61 (s, 1H), 4.16-4.12 (m, 1H), 4.11 (s, 3H), 2.82 (d, J = 5.1 Hz, 1H), 1.37 (tq, J = 4.9, 8.2 Hz, 1H), 0.78-0.66 (m, 2H), 0.57-0.48 (m, 1H), 0.42-0.30 (m, 1H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 16681-65-5.

Reference:
Patent; YISSUM RESEARCH DEVELOPMENT COMPANY OF THE HEBREW UNIVERSITY OF JERUSALEM LTD.; SNIR-ALKALAY, Irit; VACCA, Joseph; BEN-NERIAH, Yinon; (238 pag.)WO2019/155468; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common heterocyclic compound, 423165-07-5, name is exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, molecular formula is C13H22N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 423165-07-5.

General procedure: To an aqueous solution of active hydrogen containing amide, few drops of aqueous ammonia solution (1 eq.) and secondary amine (1 eq.) were added in drops in an ice-cold solution under constant stirring for dissolution. Aromatic aldehydes dissolved in methanol, added dropwise to the above mixture and stirring was continued for 2 h. The formation of compounds were observed within 30 min. Reaction was monitored by TLC, after completion of reaction, the product was filtered and washed with distilled water and dried at 45-50 C.

The synthetic route of exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane has been constantly updated, and we look forward to future research findings.

Reference:
Article; Viveka, T. Lakshmi; Sharada, L. Nalanda; Asian Journal of Chemistry; vol. 30; 9; (2018); p. 2029 – 2034;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, The chemical industry reduces the impact on the environment during synthesis 288-36-8, name is 1H-1,2,3-Triazole, I believe this compound will play a more active role in future production and life.

1,2,3-Triazole (3.45 g, 50 mmol),2-iodo-5-methylbenzoic acid (5.24 g, 20 mmol),Cesium carbonate (11.72 g, 36 mmol),Trans-N, N’-dimethyl-1,2-cyclohexanediamine (0.51 g, 3.6 mmol),Cuprous iodide (0.38 g, 2 mmol),N, N-dimethylformamide (30 mL) were sequentially added into a 100 mL single-necked round bottom flask, and the mixture was gradually heated to 100 C. under a nitrogen atmosphere for reaction for 4 hours. The reaction was stopped, cooled, diluted with tap water and extracted with ethyl acetate (200 mL x 2). The aqueous layer was acidified with concentrated hydrochloric acid (pH = 1-2) and extracted with ethyl acetate (200 mL x 2). The combined organic layers were combined and dried over anhydrous sodium sulfate and filtered. The filtrate was evaporated to dryness under reduced pressure and subjected to column chromatography Purification (dichloromethane / methanol (v / v) = 50/1) afforded the title compound (yellow solid, 2.76 g, 68%).

The chemical industry reduces the impact on the environment during synthesis 1H-1,2,3-Triazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Xu Juan; Zhong Wenhe; Zhang Yingjun; Liu Qi; (35 pag.)CN105949203; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common heterocyclic compound, 217448-86-7, name is Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, molecular formula is C11H9F2N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 217448-86-7.

Mixture of 10 g (0.039 mol) of methyl- l-(2,6-difluorobenzyl)-lH-l,2,3-triazole-4- carboxylate, and 150 ml of methanolic ammonia solution was stirred at ambient temperature. The reaction mixture was heated to 45C for 22 hours. Cooled to ambient temperature. Solid was filtered, washed with methanol and dried under reduced pressure. Yield 69 g (87%); HPLC purity: 99.83%.

The synthetic route of Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; LUPIN LIMITED; SIYAN, Rajinder, Singh; AHER, Yogesh, Subhas; BHISE, Nandu, Baban; SINGH, Girij, Pal; GOHEL, Sunilkumar Vinubhai; WO2013/105029; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 3641-08-5, name is 2H-1,2,4-Triazole-3-carboxamide, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3641-08-5. 3641-08-5

General procedure: Ribavirin biosynthesis was assayed using 5 ¡Á 109 colony-forming units (CFU) in 1 mL sodium phosphate buffer (30 mM, pH7.0) containing equimolar concentrations of uridine (Urd) and TCA(2.5 mM). Reactions were performed at 60C and 200 rpm in aperiod of 16 h.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2H-1,2,4-Triazole-3-carboxamide.

Reference:
Article; De Benedetti, Eliana C.; Rivero, Cintia W.; Trelles, Jorge A.; Journal of Molecular Catalysis B: Enzymatic; vol. 121; (2015); p. 90 – 95;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

[0907] A suspension of 6-bromo-7 -( dimethoxymethyl)-1,2,3,4-tetrahydro-1 ,8-naphthyridine (intermediate 12) (300mg, 1.045 mmol), 3-methyl-lH-1,2,4-triazole (104 mg,1.254 mmol), Cs2C03 (720 mg, 2.210 mmol) and Cui ( 40 mg,0.210 mmol) in DMF (2 ml) was heated to 120 C. forapproximately 6 h. The reaction mixture was diluted withethyl acetate and water, layers were separated and the aqueouslayer was extracted with ethyl acetate (3x). Organic layerswere combined, washed with water and brine, dried usingNa2S04 , filtered, evaporated. The crude product was purifiedby silica gel colunm chromatography eluting with a gradientof MeOH (1-10%) in DCM. Product fractions were combined,evaporated and dried to yield the title compound as anorange resin. (UPLC-MS 3) tR 0.57 min; ESI-MS 290.1[M+H]+. 1HNMR(400MHz, CDCI3 ) o8.21 (s, lH), 7.21 (s,lH), 5.35 (s, lH), 4.95 (s, lH), 3.51-3.41 (m, 2H), 3.36 (s,6H), 2.75 (t, 2H), 2.47 (s, 3H), 1.97-1.86 (m, 2H).

The synthetic route of 3-Methyl-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Novartis AG; Buschmann, Nicole; Fairhurst, Robin Alec; Furet, Pascal; Knoepfel, Thomas; Leblanc, Catherine; Liao, Lv; Mah, Robert; Nimsgern, Pierre; Ripoche, Sebastien; Xiong, Jing; Han, Bo; Wang, Can; Zhao, Xianglin; US2015/119385; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1,2,3-triazole(0.7 ), 2-iodo-benzoic acid (1.0 ), cesium carbonate (2.36 g, 7.20 mmol)Trans-N, N’-dimethyl-1,2-cyclohexanediamine (0.10 g, 0.75 mmol), cuprous iodide (0.08 g, 0.40 mmo 1), N, N-dimethyl Amide (18 mL)Were successively added to a 100 mL single-necked round bottom flask and gradually warmed to 100 C for 4 hours under nitrogen protection.The reaction was quenched, cooled, diluted with tap water and extracted with ethyl acetate (200 mL X).The aqueous layer was acidified with concentrated hydrochloric acid (rhoH- = 1 ~ 2) and extracted with ethyl acetate (200 mL x 2). The combined organic layers were dried and dried over anhydrous sodium sulfate. The filtrate was evaporated under reduced pressure and purified by column chromatography. (Dichloromethane / methanol (v / v) = 30/1) gave the title compound (yellow solid, 0.511 g, 67%)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 288-36-8.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Wei Dehuo; Xue Yaping; Zhang Yingjun; (44 pag.)CN106674207; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6. 7170-01-6

To a mixture of 3-methyl- lH- l,2,4-triazole (330 mg, 3.97 mmol), 5-chloro-2-fluoro- benzaldehyde (425 mg, 2.68 mmol) in DMSO (5.0 mL) is added K2C03 (725 mg, 5.25 mmol). The reaction mixture is stirred at 100 C for 2 hours. The reaction mixture is allowed to cool to room temperature, diluted with CH2C12 (100 mL), and washed with H20 (75 mL x2). The organic layer is dried with Na2S04 and filtered. The filtrate is concentrated under reduced pressure and the residue is purified by silica gel flash column chromatography with 5% MeOH in EtOAc as the eluent to afford an impure mixture of 5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-benzaldehyde plus regiosiomer (270 mg).To a mixture of 4-(2-amino-pyrimidin-5-yl)-Nl-ieri-butyl-benzene-l,2-diamine (270 mg, 1.05 mmol) and impure mixture of 5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-benzaldehyde plus regiosiomer (270 mg) in DMF (15.0 mL) is added Oxone (650 mg, 1.06 mmol) in H20 (5.0 mL). The reaction mixture is stirred at room temperature for 1.5 hours and then quenched with saturated sodium thiosulfate aq. (25 mL). The quenched reaction mixture is extracted with EtOAc (25 mL x2) and the combined organic layers are washed with H20 (50 mL x2), dried with Na2S04 and filtered. The filtrate is concentrated under reduced pressure and the residue is purified by silica gel flash column chromatography with 5% MeOH in CH2C12 as the eluent to afford an impure mixture of 5-(2-amino- pyrimidin-5-yl)- l-ieri-butyl-2-[5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-phenyl]-2,3- dihydro-lH-benzimidazol-2-ol plus regiosiomer (25 mg).I l l A mixture of 5-(2-amino-pyrimidin-5-yl)- l-ieri-butyl-2-[5-chloro-2-(3-methyl- l,2,4- triazol-l-yl)-phenyl]-2,3-dihydro-lH-benzimidazol-2-ol plus regiosiomer (25 mg) in MeOH (25 mL) is heated at 70 C for 16 hours. The reaction mixture is allowed to cool to room temperature and is concentrated under reduced pressure. The residue is purified by silica gel flash column chromatography with 5% MeOH in CH2CI2 as the eluent followed by further purification using a HPLC C- 18 column with CH3CN (0.1%TFA) in H20 (0.1%TFA) as the eluent to afford 5-{ l-ieri-butyl-2-[5-chloro-2-(3-methyl- l,2,4- triazol-l-yl)-phenyl]-lH-benzimidazol-5-yl}-pyrimidin-2-ylamine (Example 37) (9 mg, 37 %) as a white solid LCMS (ESMS): m/z 459.20 (M++l) and 5-{ l-ieri-butyl-2-[5- chloro-2-(5-methyl-l,2,4-triazol- l-yl)-phenyl]- lH-benzimidazol-5-yl}-pyrimidin-2- ylamine (Example 38) (6 mg, 25 %) as a white solid. LCMS (ESMS): m/z 459.20 (M++l)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Methyl-1H-1,2,4-triazole.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; CHEN, Zhidong; HAO, Ming-Hong; LIU, Weimin; LO, Ho-Yin; LOKE, Pui Leng; MAN, Chuk, Chui; MORWICK, Tina, Marie; NEMOTO, Peter, Allen; TAKAHASHI, Hidenori; TYE, Heather; WU, Lifen; WO2011/68821; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics