Triazoles

288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2-(2H-1.2,3-triazol-2-yl>5-methylbenzoic acid (A-3)A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 1200C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO^ filtered and concentrated. The residue was purified by gradient elution on Sitheta2 (0 to 10% MeOH in water with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-3, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. Data for A-3 : 1HNMR (500 MHz, DMSO-d6) d 12.98 (br s , IH), 8.04 (s, 2H), 7.72-7.45 (m, 3H), 2.41 (s, 3H) ppm.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-1,2,3-Triazole, its application will become more common.

Reference:
Patent; MERCK & CO., INC.; WO2008/8518; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common compound: 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 4928-87-4

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (226 mg, 2.0 mmol) and 3- (trifluoromethoxy)aniline (0.28 mL, 2.1 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (337 mg, 2.2 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’-ethylcarbodiimide) (422 mg, 2.2 mmol) followed by N- methylmorpholine (0.88 mL, 8.0 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, concentrated under reduced pressure and chromatographed on silica gel using EtOAc and Hexanes (50:50) as eluents to get the desired amide 5 (123.8 mg, 23 % yield) as a white solid. -NMK (400 MHz, DMSO-de): <514.89-14.74 (m, 1H), 10.82 (br s, 1H), 8.67 (br s, 1H), 8.00 (br s, 1H), 7.88 (d, J= 8 Hz, 1H), 7.49 (t, J= 8.2 Hz, 1H), 7.11 (d, J= 8 Hz, 1H); 19F-NMR (376 MHz, DMSO-de): <5 -56.69 ppm. MH+ = 273.2 m/z. In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4928-87-4, other downstream synthetic routes, hurry up and to see. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

16681-65-5, The chemical industry reduces the impact on the environment during synthesis 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, I believe this compound will play a more active role in future production and life.

Intermediate 52: step b 1-(4-(1-methyl-1H-1,2,3-triazole-5-carbonyl)piperidin-1-yl)ethanone A solution of i-memyl-lH-l ,2,3-triazole (0.28 g, 3.37 mmol) in dry THF (3 mL) was cooled in a -78 C bath and -butyllithium (2.5 M in hexanes, 1 .26 mL, 3.15 mmol) was added dropwise over a 20 minute period. The suspension was stirred in the cold bath for 30 minutes and then 1 – acetyl-A’-methoxy-N-methy}piperidine-4-carboxamide (0.74 g, 3.45 mmol, Intermediate 52: step a) dissolved in THF (3 mL) was added dropwise. The resulting suspension was stirred at -78 C for 5 minutes then warmed to 0 C and stirred for an additional 30 minutes. The mixture was warmed to room temperature and stirred for 2,5 hours then quenched with saturated aqueous NH4C . The aqueous mixture was extracted with EtOAc (2 x). The combined EtOAc extracts were dried over Na2S04, filtered, concentrated to dryness and chromatographed (EtOAc/DCM) to provide the title compound.

The chemical industry reduces the impact on the environment during synthesis 1-Methyl-1H-1,2,3-triazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7343-33-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows.

(f?)-2-(6-Fluoroimidazo[1 ,2-a]pyridin-3-yl)-N-(piperidin-3-yl)pyrimidin-4-amine (42 mg, 0.13 mmol, Preparation 9b) and 3-bromo-1 H-1 ,2,4-triazole (10 mg, 0.07 mmol, prepared as described in the J. Med. Chem. 2004, 47(19), 4645-4648) are heated overnight at 150 ¡ãC. The crude reaction mixture is directly purified by reverse phase chromatography (C-18 silica from Waters, water/1 :1 acetonitrile-methanol as eluents [0.1percent v/v formic acid buffered] 0percent to 100percent) to obtain the title compound (4 mg, 15percent) as a solid.LRMS (m/z): 380 (M+1)+.1H-NMR delta (CDCIa): 1.8 (m, 2H), 1.9 (m, 1 H), 2.0 (m, 1 H), 3.2 (m, 1 H), 3.3 (m,1 H), 3.7 (m, 1 H), 4.1 (m, 2H), 5.2 (bs, 1 H), 6.1 (m, 1 H), 7.2 (m, 1 H), 7.6 (dd,1 H), 7.8 (m, 1 H), 8.1 (m, 1 H), 8.5 (s, 1 H), 9.8 (m, 1 H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ALMIRALL, S.A.; EASTWOOD, Paul Robert; GONZALEZ RODRIGUEZ, Jacob; BACH TANA, Jordi; PAGES SANTACANA, Lluis Miquel; TALTAVULL MOLL, Joan; CATURLA JAVALOYES, Juan Francisco; MATASSA, Victor Giulio; WO2011/76419; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 4928-87-4 as follows. 4928-87-4

1,2,4-triazole-3-carboxylic acid (116 mg, 1.02 mmol) was dissolved in methylene chloride (20 ml) and DMF (5 ml), reacted with EDCI (196 mg, 1.02 mmol) and HOBt (138 mg, 1.02 mmol) for 20 min, and then stirred together with 4b-amino-9b-hydroxy-7-isopropyl-4b,9b-dihydro-5-oxa-indeno[2,1-a]-inden-10-one (300 mg, 1.02 mmol) overnight at room temperature. After extraction with methylene chloride and water, the organic layer was dried over MgSO4 and concentrated in a vacuum. Purification by column chromatography (10% methanol in methylene chloride) afforded the title compound as a white solid. (141 mg, 35%). [0812] 1H-NMR (300 MHz, CD3OD) delta 1.17 (d, J=6.9 Hz, 6H, CH3), 2.85 (sep, J=6.9 Hz, 1H, CH), 6.68 (s, 1H, ArH), 6.90 (d, J=8.0 Hz, 1H, ArH), 7.45 (d, J=7.9 Hz, 1H, ArH), 7.607.97 (m, 4H, ArH), 8.40 (s, 1H, ArH).

According to the analysis of related databases, 4928-87-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; KATHOLIEKE UNIVERSITEIT LEUVEN K.U. LEUVEN R & D; KOREA RESEARCH INSTITUTE OF CHEMICAL TECHNOLOGY; Jung, Young Sik; Lee, Chong Kgo; Kim, Hae Soo; Jeong, Hee Chun; Kim, Pil Ho; Han, Soo Bong; Shin, Jin Soo; Neyts, Johan; Thibaut, Hendrik Jan; US2014/114068; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 288-36-8

DMF (1.5 ml) was added to a mixture of methyl S-iodo-beta-methyl-l-pyridinecarboxylate D36 (100 mg), lH-l,2,3-triazole (49.9 mg, 0.722 mmol), (lR,2R)-N,N’-dimethyl-l,2- cyclohexanediamine (10.27 mg, 0.072 mmol), CuI (3.44 mg, 0.018 mmol) and Cs2CO3 carbonate (235 mg, 0.722 mmol) in a microwave vial. The mixture was degassed via three vacuum/nitrogen cycles then irradiated in a single mode microwave reactor to 120 0C for 20 minutes. The mixture was irradiated in a single mode microwave reactor to 120 0C for a further 40 minutes. The reaction mixture was cooled and filtered washing the solids with EtOAc. The solids were dissolved in pH = 3 buffer solution (5 ml); UPLC check of this aqueous solution showed it contained a considerable quantity of 6-methyl-3-(2H- l,2,3-triazol-2-yl)-2-pyridinecarboxylic acid. The aqueous phase was extracted repeatedly with DCM; the combined DCM extracts were diluted with MeOH (50 ml) and treated with TMS-diazomethane. The volatiles were evaporated to give a yellow residue that was purified by flash chromatography on silica gel (Biotage, SNAP 1O g column, 10 %-50 % EtOAc/Cy) to give the title compound D39 (38 mg) as a white solid. UPLC (BasicQC_POS_50-800): rt = 0.57 minutes, peak observed: 219 (M+l). C10H10N4O2 requires 218. 1H NMR (400 MHz, CDCl3) delta ppm 8.20 (d, 1 H), 7.87 (s, 2 H), 7.44 (d, 1 H), 3.94 (s, 3 H), 2.71 (s, 3 H)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 288-36-8.

Reference:
Patent; GLAXO GROUP LIMITED; ALVARO, Giuseppe; AMANTINI, David; CASTIGLIONI, Emiliano; DI FABIO, Romano; PAVONE, Francesca; WO2010/63662; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The chemical industry reduces the impact on the environment during synthesis 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, I believe this compound will play a more active role in future production and life. 7170-01-6

A solution of 2,4-difluorobenzonitrile (7.07 g, 50.8 mmol) and 3-methyl-1H-1,2,4-triazole (4.22 g, 50.8 mmol) in N,N-dimethylformamide (45 ml) was treated with powdered anhydrous potassium carbonate (10 g) and the resulting mixture stirred at 22 C. for 18 h. The solid was then filtered and the filtrate concentrated in vacuo. The residue was diluted with ethyl acetate, washed with water and brine, then dried over anhydrous magnesium sulfate and concentrated. The resulting mixture was purified by a combination of chromatography on silica gel (elution gradient of ethyl acetate in hexane) and reversed phase silica gel to yield intermediates 81-84. 4Fluoro-2-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 117-118 C. 1HNMR 400 MHz (CDCl3) ? ppm: 2.54 (3H, s, CH3), 7.24 (1H, m, CH), 7.62 (1H, dd, J=2.5 Hz and J=9.1 Hz, CH), 7.84 (1H, dd, J=5.6 Hz and J=8.6 Hz, CH), 8.82 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40, H, 3.49, N, 27.71; Found: C, 59.25; H, 3.32; N, 27.81. 4-Fluoro-2-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 120-121 C. 1HNMR 400 MHz (CDCl3) ? ppm: 2.56 (3H, s, CH3), 7.30 (1H, dd, J=2.5 Hz and J=8.1 Hz, CH), 7.39 (1H, m, CH), 7.91 (1H, dd, J=5.5 Hz and J=8.6 Hz, CH), 8.06 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40, H, 3.49, N, 27.71; Found: C, 59.35; H, 3.70; N, 27.77. 2-Fluoro-4-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 133-134 C. 1HNMR 400 MHz (CDCl3) ? ppm: 2.52 (3H, s, CH3), 7.61 (1H, dd, J=2 Hz and J=9.1 Hz, CH), 7.67 (1H, dd, J=2 Hz and J=9.6 Hz, CH), 7.79 (1H, dd, J=6.5 Hz and J=8.6 Hz, CH), 8.56 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71; Found: C, 59.42; H, 3.24; N, 28.41. 2-Fluoro-4-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 89-90 C., 1HNMR 400 MHz (CDCl3) ? ppm: 2.69 (3H, s, CH3), 7.49-7.55 (2H, m, 2xCH), 7.83 (1H, dd, J=6.8 Hz and J=8.8 Hz, CH), 8.00 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71; Found: C, 59.17, H, 3.22, N, 28.01.

The chemical industry reduces the impact on the environment during synthesis 7170-01-6. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Naidu, B. Narasimhulu; Banville, Jacques; Beaulieu, Francis; Connolly, Timothy P.; Krystal, Mark R.; Matiskella, John D.; Ouellet, Carl; Plamondon, Serge; Remillard, Roger; Sorenson, Margaret E.; Ueda, Yasutsugu; Walker, Michael A.; US2005/267105; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common heterocyclic compound, 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 288-88-0.

A flask was charged with K2CO3 (12.1689 g, 88 mmol), 1H-1,2,4-triazole (2.0042 g, 29 mmol), Cu2O(430 mg, 3 mmol) and 1,10-phenanthroline (1.0452 g, 5.8 mmol) and then evacuated and back-filled with N2. Then, anhydrous DMF (20 ml) and iodobenzene (8.9764 g, 4.92 ml, 44 mmol) were added and the resulting mixture was heated to 120 C for 64 h and then diluted with CH2Cl2 (40 ml). The mixture was filtered through a pad of Celite and the residue washed with CH2Cl2 (20 ml). The resulting organic layer was washed with water (20 ml) and brine (20 ml), dried over MgSO4 and concentrated under reduced pressure. The crude mixture was purified by column chromatography (cyclohexane/ethyl acetate 8/0?2/0) to yield the product as a pale yellow solid (2.986 g, 71%).

The synthetic route of 1H-1,2,4-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Article; Paul, Susann; Schweizer, W. Bernd; Rugg, Graham; Senn, Hans Martin; Gilmour, Ryan; Tetrahedron; vol. 69; 27-28; (2013); p. 5647 – 5659;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

584-13-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 584-13-4 as follows.

General procedure: Synthesis of triazole Schiff?s bases was reportedpreviously [44]. Briefly, 4-arylimino-1,2,4-triazoles (1-14)and 3-arylimino-1,2,4-triazoles (15-23) were synthesized byrefluxing 4-amino-1,2,4-triazoles, or 3-amino-1,2,4-triazoles(2 mM) with equimolar amounts of substituted benzaldehydeand H2SO4 (2 mL) in ethanol (15 mL) for 4-10 h. Reactionprogress was monitored by TLC under UV light at 254 and365 nm or via exposure to iodine vapours. After completionof reaction, the solvent was vaporised under reducedpressure on a rotary evaporator. Resulting compounds werewashed with hexane and crystallized from ethanol to obtain apure compounds.

According to the analysis of related databases, 4H-1,2,4-Triazol-4-amine, the application of this compound in the production field has become more and more popular.

Reference:
Article; Choudhary, Muhammad I.; Imad, Rehan; Khan, Khalid M.; Naqeeb, Uzma; Shaikh, Muniza; Siddiqui, Salman; Subzwari, Fakiha; Zafar, Humaira; Medicinal Chemistry; vol. 16; 4; (2020); p. 575 – 591;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, A new synthetic method of this compound is introduced below., 4928-87-4

General procedure: To prepare the nanoparticles of 1, 50 ml solution of lead(II) nitrate(0.01 M) in water was positioned in a high-density ultrasonic probe, operating at 50 Hz with a maximum power output of 305 W. Into this aqueous solution a 50 ml solution of the ligand 1H-1,2,4-triazole-3-carboxylic acid (0.01 M) and sodium hydroxide (0.01 M) and potassium bromide (0.01 M) were added dropwise.The obtained precipitates were filtered off, washed withwater and then dried in air.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Safarifard, Vahid; Morsali, Ali; Inorganica Chimica Acta; vol. 405; (2013); p. 203 – 208;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics