Triazoles

7170-01-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows.

To a solution of compound 12 (0.8 g; 4.5 mmol) in N-methylpyrrolidone (5 ml), water (0.5 ml) and hydrochloric acid (5-6 drops) were added. The mixture was stirred at 100C for 6 h. The mixture was cooled to room temperature and water (100 ml) was added. Then NaHCO3 sat. (20 ml) was added, the product was extracted with EtOAc (5¡Á20 ml). Combined extracts were dried over Na2SO4 and concentrated to afford compound 13 (0.6 g, 81%) as pink solid. A solution of compound 13 (1.8 g; 11 mmol) in POCl3 (20 ml) was stirred at 100 C for 12 h. Then POCl3 was evaporated under reduced pressure. To a residue ice water (100 ml) and then NaHCO3 sat. (25 ml) were added, the product was extracted with EtOAc (3¡Á35 ml). Combined extracts were dried over Na2SO4 and concentrated to afford compound 14 (0.8 g, 40%) as light-yellow solid At 143C, to a melt 3-methyl-1H-1,2,4-triazole (744 mg, 8.95 mmol) under N2 atmosphere was added compound 14 (392 mg, 1.79 mmol). After stirring for 20 hrs, the reaction mixture was cooled down to r.t. and partitioned between H2O (20 mL) and EA (20 mL). The layers were separated and the aqueous layer was extracted with EA (20 mL x 3). The combined organic layers was dried over Na2SO4, filtered and concentrated. The residue was purified by prep. HPLC (C18, 10% to 89% acetonitrile in water (0.1% formic acid)) to compound 19 (182 mg, 44 %) as a white solid. To a stirred solution of AlCl3 (1.588 g, 11.9 mmol) in DCM (10 mL) was added methyl 2-chloro-2-oxoacetate (389 mg, 3.18 mmol) and the resulting mixture was stirred at r.t. until it became a clear solution before introduction of compound 19 (182 mg, 0.79 mmol, in 1 mL DCM). The stirring was continued at r.t. overnight. After completion of the reaction, the mixture was quenched with saturated NaHCO3 and extracted with DCM (10 mL x 3). The combined organic layers were washed with brine, dried over Na2SO4 and concentrated. The residue was purified by flash chromatography (silica gel, 0 ~ 90% ethyl acetate in petroleum ether) to provide compound 20 (58 mg, 23 %) as a yellow oil. To a stirred solution of compound 20 (58 mg, 0.18 mmol) in MeOH/H2O (1 mL/2 mL) was added NaOH (15 mg, 0.37 mmol). After stirring at r.t. for 15 min, the reaction mixture was neutralized with 1N HCl, concentrated and lyophilized to provide compound 21 (73 mg, 95 %, mixed with NaCl) as a green solid.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Tuyishime, Marina; Danish, Matt; Princiotto, Amy; Mankowski, Marie K.; Lawrence, Rae; Lombart, Henry-Georges; Esikov, Kirill; Berniac, Joel; Liang, Kuang; Ji, Jingjing; Ptak, Roger G.; Madani, Navid; Cocklin, Simon; Bioorganic and Medicinal Chemistry Letters; vol. 24; 23; (2014); p. 5439 – 5445;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common compound: 423165-07-5, name is exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 423165-07-5

General procedure: A mixture of trisallene 3 (0.25 mmol), aryl/heteroaryl iodides (0.90 mmol), nucleophiles (0.90 mmol), Pd2(dba)3 (7.5 mol %), TFP (tri-(2-furyl)phosphine) (30 mol %), and K2CO3 (2.25 mmol) in MeCN (5 mL) was stirred and heated at 80 C (oil bath temperature) until the starting material was completely consumed as monitored by TLC (see Table 1). The mixture was cooled and solvent removed under vacuo. The residue was dissolved in CHCl3 (25 mL) and extracted with H2O (20 mL) three times. The organic layer was dried over anhydrous MgSO4 and evaporated under rotatory evaporator to give the crude product, which was purified by flash chromatography.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 423165-07-5, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Gueltekin, Zeynep; Elboray, Elghareeb E.; Aly, Moustafa F.; Abbas-Temirek, Hussien H.; Shepherd, Helena J.; Grigg, Ronald; Tetrahedron; vol. 70; 33; (2014); p. 4934 – 4941;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common heterocyclic compound, 252742-72-6, name is 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one, molecular formula is C3H4ClN3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 252742-72-6.

Example 54 (3R*,4R*)-N-[3,5-bis(trifluoromethyl)benzyl]-3-(4-fluoro-2-methylphenyl)-N-methyl-1-[(5-oxo-4,5-dihydro-1H-1,2,4-triazol-3-yl)methyl]piperidine-4-carboxamide hydrochloride To a solution of the compound (0.30 g) obtained in Example 12 and potassium carbonate (0.083 mg) in 1percent H2O-DMF (5.0 mL) was added 5-(chloromethyl)-2,4-dihydro-3H-1,2,4-triazol-3-one (0.094 g) at 0¡ãC, and the mixture was stirred at room temperature for 14 hr. The reaction mixture was poured into water, and the product was extracted with ethyl acetate. The organic layer was washed with brine and dried, and the solvent was evaporated under reduced pressure. The obtained residue was purified by preparative HPLC. 1H-NMR(CDCl3)delta: 1.70-2.00 (1H, m), 2.05-2.40 (6H, m), 2.75-3.10 (6H, m), 3.45-3.49 (2H, m), 3.65-3.80 (1H, m), 4.16 (1H, d, J=15.0Hz), 4.88 (1H, d, J=15.0Hz), 6.70-6.80 (2H, m), 7.00-7.18 (1H, m), 7.33-7.40 (2H, m), 7.70-7.82 (1H, m), 10.21 (1H, br s), 10.3-11.0 (1H, br) The obtained product was treated with 1 equivalent of 4N hydrogen chloride/ethyl acetate solution to give the title compound as a white powder (0.28 g, 78percent). MS(ESI+): 574(M-HCl+H)

The synthetic route of 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Takeda Pharmaceutical Company Limited; EP1705176; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

184177-83-1, Name is 1-((2S,3S)-2-(Benzyloxy)pentan-3-yl)-4-(4-(4-(4-hydroxyphenyl)piperazin-1-yl)phenyl)-1H-1,2,4-triazol-5(4H)-one, 184177-83-1, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

Example-20: Preparation of 4-(4-(4-(4-(((3R,5R)-5-((1H-i,2,4-triazol-1-yi)methyl)-5-(2,4- difluorophenyl)tetrahydrofuran-3-yI)methoxy)phenyl)piperazin-1-yI)phenyl)-1-((2S,3S)-2-(benzyloxy)pentan-3-yI)-1H-1,2,4-triazol-5(4H)-oneSodium hydroxide solution [prepared by dissolving sodium hydroxide (7.8 gins) in water (10 ml)] was added to dimethyl sulfoxide (175 ml) at 25-30C. ((3S,5R)-5-((1H-1,2,4-triazol-1- yl)methyl)-5-(2,4-difluorophenyl)tetrahydrofuran-3-yl)methyl-4-methylbenzene sulfonate (48.12 gms) and then followed by 1 -((2S,3 S)-2-(benzyloxy)pentan-3-yl)-4-(4-(4-(4-hydroxyphenyl)piperazin- 1 -yl)phenyl)- 1 H-i ,2,4-triazol-5(4H)-one (50.Ogms) was added to the reaction mixtureat 25-30C. Heated the reaction mixture to 38-43C and stirred for 10 hours at the same temperature. Cooled the reaction mixture to 25-30C and slowly added to water at the same the same temperature. Cooled the reaction mixture to 10-15C and adjusted the pH of the reaction mixture to 7.0 using hydrochloric acid solution at the same temperature. Raised the temperature5 of the reaction mixture to 25-30C and stirred for 3 hours at the same temperature. Filtered the precipitated silid and washed with purified water. To the obtained wet compound, isopropanol (500 ml) was added at 25-30C. Heated the reaction mixture to 65-70C to get clear solution. Cooled the reaction mixture to 25-30C and stirred for 4 hours at the same temperature. Filtered the precipitated solid, washed with isopropanol and dried to get the title compound.10 Yield: 69.29 gins.

Statistics shows that 1-((2S,3S)-2-(Benzyloxy)pentan-3-yl)-4-(4-(4-(4-hydroxyphenyl)piperazin-1-yl)phenyl)-1H-1,2,4-triazol-5(4H)-one is playing an increasingly important role. we look forward to future research findings about 184177-83-1.

Reference:
Patent; MSN LABORATORIES PRIVATE LIMITED; THIRUMALAI RAJAN, Srinivasan; ESWARAIAH, Sajja; SAHADEVA REDDY, Maramreddy; WO2015/59716; (2015); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 584-13-4 name is 4H-1,2,4-Triazol-4-amine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 584-13-4

General procedure: The ligand 4-(1H-imidazol-5-ylmethylene-amino)-4H-1,2,4-triazole (5-imztrz) (Fig. 1) was prepared by the condensation reaction of a modified literature procedure [21]. The dissolved 4-amino-1,2,4-triazole (1.68 g, 0.02 mol, 1.0 eq.) in ethanol was heated to boiling (80 C). Then, the second reactant 1H-imidazole-4-carbaldehyde (2.11 g, 0.022 mol, 1.1 eq.) dissolved in ethanol was added dropwise though a dropping funnel. After the complete addition few drops of catalytic H2SO4 were added. The reaction mixture was kept for refluxing for another 10 h. After cooling down to r.t., the excess of solvent was removed by rotary evaporator at 35 C. The obtained product was washed with small amounts of cold ethanol, diethyl ether and then dried in the desiccator with phosphorus pentoxide as dry agent. A light-yellow powder was obtained.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4H-1,2,4-Triazol-4-amine, and friends who are interested can also refer to it.

Reference:
Article; Li, Ai-Min; Rentschler, Eva; Polyhedron; vol. 154; (2018); p. 364 – 372;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 7411-23-6.

Intermediate 2 -l-methyl-lH-l,2,4-triazole To 3,5-dibromo-lH-l,2,4-triazole (1.0 g, 4.41 mmol) in DMF (9 mL) was added sodium tert- pentoxide (0.485 g, 4.41 mmol). The mixture was stirred for 10 min at rt under nitrogen atmosphere, lodomethane (0.29 mL, 4.63 mmol) was added and the mixture was stirred at 40C for 2 hours. The mixture was poured onto water and extracted with diisopropylether (2x). The organic phase was washed with water (2x), brine and dried over sodium sulfate. The solvents were evaporated to give the title compound as a solid (0.83 g, 78%). MS (CI) m/z 242 [M+]. XH NMR (500 MHz, CDCI3) delta ppm 3.89 (s, 3 H).

The synthetic route of 3,5-Dibromo-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACTURUM LIFE SCIENCE AB; BESIDSKI, Yevgeni; YNGVE, Ulrika; PAULSEN, Kim; LINDE, Christian; MALMBORG, Jonas; WO2014/195322; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4928-88-5, name is Methyl 1H-1,2,4-triazole-3-carboxylate, This compound has unique chemical properties. The synthetic route is as follows., 4928-88-5

EXAMPLE 9 A mixture of methyl 1,2,4-triazole-3-carboxylate (26.4 g, 0.21 mole) and beta-D-ribofuranosyl-1,2,3,5-tetraacetate (60.2 g, 0.19 mole) was melted and then 1.1 g of p-toluenesulfonic acid was added thereto. The reaction mixture was reacted for hours, while maintaining the temperature of the reaction mixture at 95+-5¡ã C. And then, the reaction mixture was crystallized with 421.1 ml of methanol to give 64 g of 1-(2,3,5-tri-O-acetyl-beta-D-ribofuranosyl)-1,2,4-triazole-3-carboxylic acid methyl ester (yield: 88percent).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Lee, Tai-Au; Park, Nam-Jin; Khoo, Ja-Heouk; Lee, Byung-Cheol; US2003/120064; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7170-01-6 as follows. 7170-01-6

A mixture of 2-chloro-5-fluoropyrimidine (2.39 g, 18 mmol), 3-methyl-1H-1,2,4-triazole (1.5 g, 18 mmol), potassium carbonate (5 g, 36 mmol), potassium iodide (0.3 g, 1.8 mmol) and CH3CN (110 mL) were heated to 70 C for 18 h. The mixture was cooled to RT, diluted with CH2Cl2 (220 mL), filtered through Celite and the collected precipitate washed with CH2Cl2. The solid resulting from solvent evaporation was purified by chromatography (1-10% MeOH-CH2Cl2) and recrystallised from EtOAc to give the title compound (1.01 g, 5.64 mmol) as a colourless solid. 1H NMR (CDCl3, 300 MHz): delta 9.05 (s, 1H), 8.66 (s, 2H), 2.54 (s, 3H); LCMS (ESI) RT = 0.43 min, [M+H]+ 180.1.

According to the analysis of related databases, 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; FAUBER, Benjamin; BODIL VAN NIEL, Monique; CRIDLAND, Andrew; HURLEY, Christopher; KILLEN, Jonathan; WARD, Stuart; (203 pag.)WO2016/177686; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

16681-65-5, Name is 1-Methyl-1H-1,2,3-triazole, 16681-65-5, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

intermediate 6: step a(1-methyl-1H-1,2,3-triazol-5-yl)(1-methyl-1H-imidazol-5-yl)methanolA solution of 1 -methyl- lH- l ,2,3-triazole (1 .47 g, 17.7 mmol, PCT Int. Appl. 2008098104) in 20 mL THF was cooled to -40 C in a dry-ice/acetonitrile bath. -Butyllithium (1.6 M in hexane, 10.2 mL, 16.3 mmol) was added dropwise via syringe and the mixture was stirred at -40 C for 30 minutes. A solution of 1 -methyl- 1 H-imidazole-5-carbaldehyde (1.50 g, 13.6 mmol) in 10 mL THF was then added and the mixture was stirred for 5 minutes, then was transferred to an ice/water bath. After 1 hour, the mixture was quenched by addition of saturated aqueous NPLCl, diluted with water, and extracted twice with EtOAc. The aqueous phase, which contained the title compound, was then concentrated. The residue wras purified by flash column chromatography (silica gel, gradient 3-10% MeOH-DCM) to afford the title compound as a light yellow foam.

Statistics shows that 1-Methyl-1H-1,2,3-triazole is playing an increasingly important role. we look forward to future research findings about 16681-65-5.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; BARBAY, Kent; EDWARDS, James, P.; KREUTTER, Kevin, D.; KUMMER, David, A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald, L.; WOODS, Craig, R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell, D.; LEONARD, Kristi, A.; WO2015/57203; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

61-82-5, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, A new synthetic method of this compound is introduced below.

A mixture of aldehyde (1 mmol), dimedone (1 mmol), 3-amino-1,2,4-triazole (1 mmol), and [C4(H-DABCO)2][HSO4]4 (16 mg) washeated in an oil bath (90 C) under solvent-free conditions. Aftercompletion of the reaction, as identified by TLC, using n-hexane:EtOAc (7:3) as the eluent, 10 mL of water was added and stirredfor 10 min. The catalyst was dissolved in water and the solid wasfiltered off and washed with warm EtOH, to obtain the pure targetmolecule.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics