Triazoles

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, SDS of cas: 7170-01-6

DMF (1.5 ml) was added to a mixture of methyl 3-iodo-6-methyl-2-pyridinecarboxylate D44 (100 mg), 3-methyl-1H-1,2,4-triazole (45.0 mg, 0.541 mmol), (1R,2R)-N,N’-dimethyl-1,2-cyclohexanediamine (10.27 mg, 0.072 mmol), copper(I) trifluoromethanesulfonate benzene complex (9.08 mg, 0.018 mmol) and cesium carbonate (235 mg, 0.722 mmol) in a screw-topped vial. The mixture was degassed via 3 vacuum/nitrogen cycles and heated with shaking to 120 C. for 90 minutes. The reaction mixture was evaporated to dryness under reduced pressure. The residue was dissolved in water/MeOH (1:1, 3 ml) and acidified to pH=2 by addition of 2 M HCl solution. The resulting mixture was evaporated to dryness under reduced pressure then the residue was triturated with DCM/MeOH (3:1, 5 ml). The mixture was filtered washing with more DCM/MeOH (3:1, 5 ml). The filtrate was treated with trimethylsilyldiazomethane solution (2 M in hexanes, 2 ml, 4 mmol) to re-esterify the acid. The reaction mixture was evaporated under reduced pressure and the residue was purified by flash chromatography on silica gel (Biotage Snap 2¡Á10 g columns in series, EtOAc/Cy from 50/50 to 100/0) to give the title compound D84 (48 mg) as a colourless solid. UPLC (Acid FINAL_QC_POS): rt=0.45 minutes, peak observed: 233 (M+1). C11H12N4O2 requires 232. 1H NMR (400 MHz, CDCl3) delta ppm 2.52 (s, 3H) 2.73 (s, 3H) 3.91 (s, 3H) 7.47 (d, 1H) 7.81 (d, 1H) 8.32 (s, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ALVARO, Giuseppe; Amantini, David; Castiglioni, Emiliano; Di Fabio, Romano; Pavone, Francesca; US2010/144760; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-36-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 288-36-8 name is 1H-1,2,3-Triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Example 14: 5-[l-tert-Butyl-2-(2-l,2,3-triazol-2-yl-phenyl)-lH-benzimidazol-5-yl]- pyrimidin-2-ylamine and Example 15: 5-[l-tert-Butyl-2-(2-l,2,3-triazol-l-yl-phenyl)-lH-benzimidazol-5-yl]- pyrimidin-2-ylamine29% 13%To a solution of 5-[2-(2-bromo-phenyl)- l-ieri-butyl- lH-benzimidazol-5-yl]-pyrimidin-2- ylamine (refer to example 8, step 1) (57 mg, 0.14 mmol) in DMF (5 mL) are added 1Eta- 1,2,3-triazole (0.012 mL, 0.2 mmol), CuO (1 mg, 0.013 mmol), Fe(acac)3 (14 mg, 0.04 mmol) and Cs2C03 (88 mg, 0.27 mmol) at room temperature. The mixture is heated at 120 C for 96 hours and then cooled down and filtered. The filtrate is extracted with H20 (10 mL) and EtOAc (3 x 10 mL). The combined organic layer is dried with MgS04 and is filtered. The filtrate is concentrated and the residue is purified by silica gel chromatography eluting with 5% MeOH in CH2C12 to afford a less polar product 5-[l- ieri-butyl-2-(2- l,2,3-triazol-2-yl-phenyl)-lH-benzimidazol-5-yl]-pyrimidin-2-ylamine (Example 14) (16 mg, 29%) LCMS (ESMS): m/z 411.68 (M++l) as the major product and a more polar product 5-[l-ieri-butyl-2-(2-l,2,3-triazol-l-yl-phenyl)- lH- benzimidazol-5-yl]-pyrimidin-2-ylamine (Example 15) (7 mg, 13%) LCMS (ESMS): m/z 411.68 (M++l) as the minor product.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-1,2,3-Triazole, and friends who are interested can also refer to it.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; CHEN, Zhidong; HAO, Ming-Hong; LIU, Weimin; LO, Ho-Yin; LOKE, Pui Leng; MAN, Chuk, Chui; MORWICK, Tina, Marie; NEMOTO, Peter, Allen; TAKAHASHI, Hidenori; TYE, Heather; WU, Lifen; WO2011/68821; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 41253-21-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 41253-21-8 as follows.

2-(1H-1,2,4-Triazol-1-yl)benzonitrile. A suspension of 2-fluorobenzylnitrile (3.0 g, 25 mmol) and 1,2,4-triazole sodium salt (2.4 g, 27 mmol) were stirred in tetrahydrofuran (7 mL) and dimethylformamide (14 mL) at 95 C. for 18 h. After cooling and concentrating, the product was crystallized from hot CH2Cl2/hexane (1:1) to give the title compound as a white solid (4.25 g, 100% yield). 1H-NMR (300 MHz, CDCl3) delta ppm: 8.74 (1H, s), 8.16 (1H, s), 7.82 (1H, dd, J=4.9, 1.3 Hz), 7.77-7.25 (2H, m), 7.57-7.51 (1H, m). LCMS [M+H]+ calcd for C9H7N4: 171.06. found: 171.12

According to the analysis of related databases, 41253-21-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/129379; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, A new synthetic method of this compound is introduced below., Quality Control of 3,5-Diamino-1,2,4-triazole

Intermediate Example 36.0: 4-(2-Bromo-6-phenyl[1,2,4]triazolo[1,5- a]pyrimidin-5-yl)benzaldehyde; Stepi : 2-Amino-6-phenyl[1 ,2,4]triazolo[1 ,5-a]pyrimidine-5,7-diol; A solution of 9.Og 3,5-diamino-1 ,2,4-triazole and 22.4mL diethyl phenylmalonate in N,N-dibutylbutan-1-amine was heated under microwave irradiation to 1800C for 8h. The reaction mixture formed two layers after cooling to room temperature. The top layer was removed and the solvent of the lower layer was evaporated. The residue was treated with water and acidified with 5N HCI. The precipitated product was collected by filtration and dried. The crude product was used without further purification. MS (M+1): 244

The synthetic route of 1455-77-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BAYER SCHERING PHARMA AKTIENGESELLSCHAFT; VENNEMANN, Matthias; MAIER, Thomas; HOeLDER, Swen; BENEKE, Gerrit; DEHMEL, Florian; ZUeLCH, Armin; STRUB, Andreas; BECKERS, Thomas; INCE, Stuart; REHWINKEL, Hartmut; LIU, Ningshu; BOeMER, Ulf; WO2010/91808; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-65-5, These common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 53: step a (1-methyl-1H-1,2,3-triazol-5-yl)(6-(trifluoromethyl)pyridin-3-yl)methanol A 50 mL flask containing 1 -methyl- lH-l ,2,3-triazoie (0.47 g, 5.71 mmol) in dry THF (3 mL) was cooled to -43 C (CH3CN-CO2 bath). -Butyllithium (2.5 M in THF, 2.43 mL, 6.08 mmol) was then added dropwise resulting in a light blue suspension. The suspension was stirred at -40 C for 40 minutes, and then a homogeneous solution of 6-(trifluoromethyl)nicotinaldehyde (1 g, 5.71 nimol) in THF (7 niL) was introduced at -40 C, The resulting homogeneous colorless solution was allowed to warm gradually to room temperature, and after 30 minutes, LC/MS showed that the reaction was complete. The mixture was quenched with water and aqueous NH4CI and extracted with EtOAc (2 x). The combined organic extracts were washed with brine, dried over Na2S04, filtered and concentrated to provide the title compound as a semi-solid which was carried on to the next step without, further purification.

The synthetic route of 16681-65-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 1533519-84-4, name is 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione, molecular formula is C15H13N3S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C15H13N3S

A pressure vessel containing the compound of Formula (5) (10 g, 37.40 mmol) and methyl 3-bromopropionate (7.73 g, 44.88 mmol) in N,N-dimethylformamide (70 mL) was sealed and heated to an external temperature of 60 C. for 3 days. The reaction was then cooled to room temperature to allow for a sample of the reaction mixture to be taken for 1H-NMR analysis (91% conversion). Methyl 3-bromopropionate (97%, 1.25 g, 7.48 mmol) was charged to the vessel and the reaction was re-sealed and heated to an external temperature of 60 C. for 24 hours. Following completion of the reaction, the reaction solution was concentrated in vacuo at 35-40 C. to remove the N,N-dimethylformamide. The resulting oil residue was then dissolved in dichloromethane (100 mL) and washed with a saturated aqueous sodium bicarbonate solution (50 mL), with the organic phase being dried over anhydrous sodium sulfate and concentrated in vacuo at 30-35 C. to afford a green oil (17.07 g). The oil was purified by silica gel column chromatography (column 27 cm*6 cm), using a gradient system of ethyl acetate and heptanes (2 L, 40:60 ethyl acetate:heptanes; 1 L, 50:50 ethyl acetate:heptanes; 2 L, ethyl acetate) to afford the compound of Formula (11) (9.75 g; 67% yield from the compound of Formula (5)) as a dark oil. 1H-NMR (CDCl3, 300 MHz) delta: 0.78-0.93 (2H, m), 1.12-1.21 (2H, m), 2.42 (1H, tt, J=5.44 Hz, 8.46 Hz), 2.91 (2H, t, J=6.77 Hz), 3.47 (2H, t, J=6.86 Hz), 3.64 (3H, s), 7.30 (1H, d, J=8.25 Hz), 7.35 (2H, s), 7.57 (1H, apparent dt, J=1.02 Hz, 8.22 Hz), 7.66 (1H, apparent dt, J=1.02 Hz, 8.04 Hz), 8.30 (1H, s), 8.54 (1H, d, J=8.44 Hz).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1533519-84-4, its application will become more common.

Reference:
Patent; Apotex Inc.; Bodhuri, Prabhudas; Green, Melanie R. A.; Karadeolian, Avedis; Weeratunga, Gamini; Gorin, Boris; (33 pag.)US2018/258057; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, A new synthetic method of this compound is introduced below., Safety of 1H-1,2,4-Triazol-5-amine

General procedure: A mixture of 2-aminobenzimidazole or 3-amino-1,2,4-triazole (1.0 mmol), arylaldehyde (1.0 mmol), dimedone (1.0 mmol), and 15 mol % p-TsOH.H2O was stirred in 5 cm3 acetonitrile as solvent at 40-50 C for the appropriate time (Table 3). The progress of the reaction was monitored by TLC. After completion of the reaction, a thick precipitate was obtained. The solid product was filtered off and washed with acetonitrile and subsequently dried in air. The pure product was characterized by conventional spectroscopic methods.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Mousavi, Mir Rasul; Maghsoodlou, Malek Taher; Monatshefte fur Chemie; vol. 145; 12; (2014); p. 1967 – 1973;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 3641-13-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3641-13-2, name is 5-Amino-4H-1,2,4-triazole-3-carboxylic acid belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

2-(((3R,4S)-3-fluoropiperidin-4-yl)oxy)-5-(4-((4-(4-(oxetan-3-yl)piperazin-1-yl)phenyl)amino)-1,3,5-triazin-2-yl)benzonitrile (70 mg, 0.13 mmol), HATU (100 mg, 0.26 mmol), DIEA (52 mg, 0.4 mmol) and 3-amino-1H-1,2,4-triazole-5-carboxylic acid (34 mg, 0.26 mmol) were dissolved in DMF (4 mL) and stirred at room temperature for 2 hr. The mixture was diluted with DCM and extracted with water. The organic phase was dried over Na2SO4 and concentrated. The residue was purified silica gel column with ESCO system with 5-20% MeOH in CH2Cl2 to give the title compound. 1H NMR (400 MHz, DMSO-d6) delta 12.33 (d, J=7.3 Hz, 1H), 10.12 (d, J=22.3 Hz, 1H), 8.81-8.66 (m, 1H), 8.66-8.42 (m, 2H), 7.71-7.34 (m, 3H), 6.95 (t, J=9.2 Hz, 2H), 6.15 (s, 1H), 5.26-4.85 (m, 2H), 4.51 (m, 4H), 4.17 (s, 1H), 3.73 (m, 1H), 3.60 (m, 1H), 3.45 (m, 1H), 3.12 (m, 4H), 2.41 (m, 4H), 2.12-1.79 (m, 2H). LCMS-ESI+ (m/z): [M+H]+ calcd for C31H33FN12O3: 641.3. found: 641.4

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Amino-4H-1,2,4-triazole-3-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Gilead Sciences, Inc.; Du, Zhimin; Guerrero, Juan A.; Kaplan, Joshua A.; Knox, JR., John E.; Lo, Jennifer R.; Mitchell, Scott A.; Naduthambi, Devan; Phillips, Barton W.; Venkataramani, Chandrasekar; Wang, Peiyuan; Watkins, William J.; Zhao, Zhongdong; (593 pag.)US2016/96827; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, A new synthetic method of this compound is introduced below., Quality Control of 1H-[1,2,3]Triazole-4-carboxylic acid

1,2,3-Triazole-4-carboxylic acid (18 mg, 156 mumol), DIPEA (81.6 muL, 468 mumol) and HATU (59.3 mg, 156 mumol) were combined in DMF (0.2 mL) and stirred for 5 minutes at room temperature. This was then combined with (2S,4R)-4-amino-5-biphenyl-4-yl-2-hydroxymethyl-2-methyl-pentanoic acid (S)-2-benzyloxycarbonylamino-3-methyl-butyryloxymethyl ester (90 mg, 160 mumol) dissolved in DMF (1 mL). The resulting mixture was stirred for 20 minutes and the solvent was evaporated. The remaining solid was dissolved in degassed 4.4% formic acid-methanol (5 mL) in a flask containing palladium black (~100 mg) under nitrogen. The mixture was continuously stirred at room temperature. The mixture was filtered and washed with MeOH. The solvent was evaporated and the product purified by preparative HPLC to yield the title compound (25 mg; purity 95%). MS m/z [M+H]+ calc’d for C28H35N5O6, 538.26. found 538.4.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C9H7N3O

Step 1. (E)-3-(4-(1H-1,2,4-triazol-1-yl)phenyl)-1-(3,5-dichlorophenyl)prop-2-en-1-one To a solution of 1-(3,5-dichlorophenyl)ethanone (0.5 g, 2.6 mmol) in ethanol (20 mL) was added 4-(1H-1,2,4-triazol-1-yl)benzaldehyde (0.46 g, 2.65 mmol) and the reaction was cooled to 0 C. NaOH (0.22 g, 5.29 mmol) in water (10 mL) was then added and the reaction was allowed to stir for 2 h at 0 C. The reaction was extracted with EtOAc and the combined organic layers were dried over Na2SO4 and concentrated under reduced pressure to afford the title compound (0.149 g, 17%):); ESIMS m/z 430.05 ([M+H]+) 344.08

The synthetic route of 27996-86-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171314; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics