Triazoles

Adding a certain compound to certain chemical reactions, such as: 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1001401-62-2, Quality Control of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

A solution of (R)-tert-butyl 5-methyl-l,4-diazepane-l-carboxylate Int A (2.50 g, 11.7 mmol) in DMF (50 mL) was treated with Int H (2.21 g, 11.7 mmol), HATU (4.47 g, 11.8 mmol), and DIEA (4.89 ml, 28.0 mmol). The reaction was stirred at room temperature overnight, then diluted with saturated, aqueous NH4CI. The solution was extracted with EtOAc (2x) and the organics were subsequently washed with brine, then with water, then with brine again, dried over MgS04, filtered, and concentrated. The crude material was purified by silica gel gradient chromatography (0-60% ethyl acetate in hexanes), providing 1-1 as an oil. LRMS m/z (M+H) 386.2 found, 386.2 required.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; REGER, Thomas, S.; SKUDLAREK, Jason, W.; (0 pag.)WO2016/85784; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 4928-87-4, A common heterocyclic compound, 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

0.15 g (0.31 mmol) of intermediate 20 was dissolved in 30 ml CH2CI2, 0.1 g (0.52 mmol) of EDCI, 0.07 g (0.53 mmol)Eta0BetaTau,After stirring to dissolve, 0.03 g (0.27 mmol)1,2,4-triazole-3-carboxylic acid, stirred at room temperature12h, TLC detection. The reaction was carried out and the crude product was dried and purified by silica gel column chromatography (eluent: methanol / dichloromethane / aqueous ammonia = 50: 500: 1, ¥: ¥ ¥) to give a white solid. Example 16The target product, 0.1 g, yield 55.6%

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Beijing Foreland Pharma Co., Ltd; Zhang, Xingmin; Wang, Ensi; Niu, Shengxiu; Guo, Jing; Dai, Zhuolin; Zheng, Nan; Ji, Qi; Li, Qinyan; Liang, Tie; (109 pag.)CN104411706; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 288-36-8

Step 1) Synthesis of 5-methyl-2- (2H-1, 2, 3-triazol-2-yl) benzoic acid To a solution of N, N-dimethylformamide (30 mL) were added sequentially 2H-1, 2, 3-triazole (3.45 g, 50 mmol) , 2-iodo-5-methyl benzoic acid (5.24 g, 20 mmol) , cesium carbonate (11.72 g, 36 mmol) , trans-N, N’-dimethyl-1, 2-cyclohexanediamine (0.51 g, 3.6 mmol) and cuprous iodide (0.38 g, 2 mmol) . The reaction was heated to 100 ? under N2. After reaction for 4 hours, the reaction mixture was cooled to rt, diluted with water (60 mL) and extracted with ethyl acetate (200 mL × 2) . The aqueous layer was acidified to pH 1 to 2 with concentrated hydrochloric acid, and then extracted with ethyl acetate (200 mL × 2) . The combined organic layers were dried over anhydrous sodium sulfate, and filtered. The filtrate was concentrated in vacuo and the residue was purified by silica gel column chromatography (DCM/methanol (v/v) =50/1) to give the title compound as a yellow solid (2.76 g, 68 %) .MS (ESI, neg. ion) m/z: 202.1 [M-H] -;1H NMR (CD3OD, 600 MHz) d (ppm) : 7.88 (s, 2H) , 7.66 (d, 1H) , 7.59 (d, J= 8.2 Hz, 1H) , 7.50-7.48 (dd, J = 8.1 Hz, 1.1 Hz, 1H) , 2.45 (s, 3H) ; and13C NMR (CD3OD, 151 MHz) d (ppm) : 169.8, 140.7, 137.5, 136.7, 133.5, 131.5, 129.3, 126.0, 21.0.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; ZHANG, Yingjun; JIN, Chuanfei; ZHANG, Ji; (90 pag.)WO2017/88759; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 13273-53-5, These common heterocyclic compound, 13273-53-5, name is 4-Bromo-1-methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of tert-butyl 4-({[2-amino-5-(4,4,5,5-tetramethyl-1 ,3,2-dioxaborolan-2-yl)pyridin-3-yl]oxy}methyl)piperidine-1 -carboxylate (I-55) (580 mg, 1 .34 mmol), 4-bromo-1 -methyl-1 /-/-1 ,2,3-triazole (260 mg, 1 .61 mmol), Cs2C03 (2 N, 1 .34 mL, 2.68 mmol) in toluene (2 mL) and EtOH (6 mL) was added Pd(PPh3)4 (30.9 mg, 0.0268 mmol). The mixture was thoroughly degassed before heating under nitrogen at 80 C for 18 hr. TLC (EtOAc) indicated the reaction was completed. The mixture was concentrated under vacuum to dryness, and the residue purified by silica gel chromatography (petroleum ether/ EtOAc = 1/1 to 0/1) to give tert-butyl 4-({[2-amino-5-(1 -methyl-1 /-/-1 ,2, 3-triazol-4-yl)pyridin-3-yl]oxy}methyl)piperidine-1 -carboxylate (I-60) (503 mg, 97%) as a white solid.

The synthetic route of 13273-53-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PFIZER INC.; JOHNSON, Ted William; RICHARDSON, Paul Francis; COLLINS, Michael Raymond; RICHTER, Daniel Tyler; BURKE, Benjamin Joseph; GAJIWALA, Ketan; NINKOVIC, Sacha; LINTON, Maria Angelica; LE, Phuong Thi Quy; HOFFMAN, Jacqui Elizabeth; (335 pag.)WO2016/97918; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Into a 3000-mL 3-necked round-bottom flask, was placed 2H-1,2,3-triazole (100 g, 1.45 mol, 1.00 equiv), water (1000 mL), Br2 (522 g, 3.27 mol, 2.25 equiv). The resulting solution was stirred overnight at 50 C. in an oil bath. The reaction was then quenched by the addition of 1000 mL of Na2SO3 (aq). The solid was collected by filtration and dried in an oven under reduced pressure. This resulted in 313 g (95%) of 4,5-dibromo-2H-1,2,3-triazole as a white solid.

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Gilead Apollo, LLC; Ghosh, Shomir; Greenwood, Jeremy Robert; Harriman, Geraldine C.; Leit De Moradei, Silvana Marcel; (290 pag.)US2017/166584; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 81606-79-3, name is 2-(1,2,4-Triazol-1-yl)acetonitrile, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 81606-79-3, Computed Properties of C4H4N4

General procedure: A solution of aryl acetonitrile 2 (50 mg), and triethylamine (1.1 equiv.) in dimethylformamide dimethyl acetal (0.5 mL, 3.76 mmol) was heated in a microwave reactor at 120 C for 20 minutes. The mixture was cooled to RT, and solvents were then evaporated. To the resulting crude product 3 was added hydrazine mono-hydrobromide (3.0 equiv.), 200 proof EtOH (1.0 mL), and H2O (0.3 mL). The mixture was heated in a microwave reactor at 120 C for 20 minutes. The mixture was cooled to RT and concentrated in vacuo. The resulting residue was subjected to liquid-liquid extraction using saturated NaHCO3 (aq) and CH2Cl2. The organic layer was collected, dried over anhydrous MgSO4, filtered and removed under vacuum to afford 4.The resulting crude product 4 and 2-arylsubstitutedmalondialdehydes or 1,1,3,3tetramethoxypropane (1.0 equiv.) were dissolved in glacial AcOH (1.0 mL) and 200 proof EtOH (1.5 mL). The mixture was heated in a microwave reactor at 120 C for 20 minutes. After cooling on ice, the precipitate was collected on a fine scintered-glass frit and washed with icecold EtOH (2 x 1.0 mL). The resulting crystals 5-32 were dried and collected.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(1,2,4-Triazol-1-yl)acetonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Singleton, Justin D.; Dass, Reuben; Neubert, Nathaniel R.; Smith, Rachel M.; Webber, Zak; Hansen, Marc D.H.; Peterson, Matt A.; Bioorganic and Medicinal Chemistry Letters; vol. 30; 2; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 41253-21-8, Recommanded Product: Sodium 1,2,4-triazol-1-ide

General procedure: 2-Chloro-N-(6-alkoxybenzo[d]thiazol-2-yl)acetamide (5 mmol) and sodium 1,2,4-triazole (6 mmol)were dissolved in N,N-dimethylformamide (10 mL) and stirred for 10 h at room temperature. Half of thesolvent was then evaporated, the solution was poured in 50 mL water, and extracted with ethyl acetate(30 mL 3). The ethyl acetate layer was dried over anhydrous MgSO4. After removing the solventunder reduced pressure, the crude product was obtained and recrystallized from dichloromethane toyield a white solid.N-(6-((3-Fluorobenzyl)oxy)benzo[d]thiazol-2-yl)-2-(1H-1,2,4-triazol-1-yl)acetamide (7a). White solid in55.1%. mp: 212-213 C. 1H-NMR (300 MHz, DMSO) delta12.73 (s, 1H, -CO-NH-), 8.59 (s, 1H, triazole-H),8.03 (s, 1H, triazole-H), 7.77-7.64 (m, 2H, Ar-H), 7.52-7.40 (m, 1H, Ar-H), 7.37-7.27 (m, 2H, Ar-H),7.23-7.10 (m, 2H, Ar-H), 5.33 (s, 2H, triazole -CH2-), 5.18 (s, 2H, -OCH2-). 13C-NMR (75 MHz, DMSO) delta166.31, 162.67 (d, J = 243.8 Hz), 156.09, 155.57, 152.04, 146.23, 142.99, 140.38 (d, J = 7.5 Hz), 133.21,130.94 (d, J = 8.4 Hz), 124.07 (d, J = 2.6 Hz), 121.88, 116.15, 115.08 (d, J = 21.0 Hz), 114.77 (d, J = 21.8 Hz),106.59, 69.42, 51.57. IR (KBr) cm-1: 1605.72, 1556.78 (C=N). Tof-MS: m/z [M + H]+ 383.65.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Sodium 1,2,4-triazol-1-ide, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Liu, Da-Chuan; Zhang, Hong-Jian; Jin, Chun-Mei; Quan, Zhe-Shan; Molecules; vol. 21; 2; (2016);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 107534-96-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 107534-96-3, name is 3-((1H-1,2,4-Triazol-1-yl)methyl)-1-(4-chlorophenyl)-4,4-dimethylpentan-3-ol, This compound has unique chemical properties. The synthetic route is as follows.

First, tebuconazole (184 mg, 0.6 mmol) was dissolved in anhydrous dichloromethaneIn (CH2Cl2, 15 mL), add triethylamine(C6H15N, 730 mg, 7.2 mmol), after stirring in an ice bath for 5 minutes,Addition of monoethylmonosuccinate (C6H9ClO3, 988 mg, 6 mmol)Stir overnight at room temperature, followed by washing with water and saturated saline(15 mL¡Á3, respectively), after drying the dichloromethane with anhydrous sodium sulfate,It was filtered, evaporated to dryness under reduced pressure to give the intermediate product (about 400 mg).Used directly for the next hydrolysis. The product structure was characterized by LC/MS.

The chemical industry reduces the impact on the environment during synthesis 3-((1H-1,2,4-Triazol-1-yl)methyl)-1-(4-chlorophenyl)-4,4-dimethylpentan-3-ol. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Henan University of Science and Technology; Chen Xiujin; Li Zhaozhou; Wang Yao; Gao Hongli; Li Zhili; Cao Li; Li Daomin; Xu Chuanlai; (16 pag.)CN106674138; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

A solution of 2-(2H-1,2,3-triazol-2-yl)benzoic acid (4.3 g, 0.023 mol) in 15 mL of 50C12 was heated at 50 C for 30 mins. After cooling to RT, the mixture was concentrated in vacuo to remove the solvent. To a solution of the product from step 1 (3.3 g, 0.02 mol) and TEA (8.7 mL, 0.06 mol) in dry DCM (10 mL) at 0 C was added a solution of the above residue inDCM (10 mL) dropwise. The resulting mixture was stirred at RT overnight. The mixture was filtered and the filtrate was concentrated in vacuo. The residue was purified by silica gel column chromatography (50% EtOAc in petroleum ether) to give the title compound as an oil. LRMS m/z (M+H) 331.1 found, 331.2 required.

The synthetic route of 1001401-62-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; LIVERTON, Nigel; LUO, Yunfu; (58 pag.)WO2016/89722; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 956317-36-5, These common heterocyclic compound, 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of the primary amine, 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid 31 (0.33 g, 1.6 mmol), N,N-diisopropylethylamine(DIPEA, 2.5 mL, 14.7 mmol), and 1-[bis(dimethylamino)methylene]-1H-1,2,3-triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(HATU, 0.91 g, 2.4 mmol) in DMF (3.2 mL) was stirredat room temperature for 17 h. The reaction was quenched by theaddition of water, and the mixture was extracted with EtOAc.The organic layer was washed with brine, dried over Na2SO4, filtered,and concentrated under reduced pressure. The resulting residuewas purified by preparative HPLC to obtain the title compound7a as a colorless solid (0.18 g, 28% over 2 steps).

Statistics shows that 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid is playing an increasingly important role. we look forward to future research findings about 956317-36-5.

Reference:
Article; Futamura, Aya; Nozawa, Dai; Araki, Yuko; Tamura, Yunoshin; Tokura, Seiken; Kawamoto, Hiroshi; Tokumaru, Yuichi; Kakihara, Sora; Aoki, Takeshi; Ohtake, Norikazu; Bioorganic and Medicinal Chemistry; vol. 25; 20; (2017); p. 5203 – 5215;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics