Triazoles

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

A solution of 2-(2H-l,2,3-triazol-2-yl)benzoic acid (60.5 mg, 0.320 mmol) and methyl 4-methoxy-2-(((3i?,6i?)-6-methylpiperidin-3-yl)amino)nicotinate (74.5 mg, 0.267 mmol) in DMF (1778 mu) was treated with l-hydroxy-7-azabenzotriazole (72.6 mg, 0.533 mmol), EDC (102 mg, 0.533 mmol), and triethylamine (112 muEpsilon, 0.800 mmol) and heated at 50 C overnight. The reaction was cooled, diluted with water and saturated aqueous sodium bicarbonate, and extracted 2x with EtOAc. The combined organic fractions were washed with brine, dried over magnesium sulfate, filtered, and concentrated. The residue was purified by silica gel gradient chromatography (0-95% EtOAc in hexanes), providing the title compound. HRMS m/z (M+H) 451.2070 found, 451.2088 required

The synthetic route of 1001401-62-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; SKUDLAREK, Jason, W.; WO2015/95441; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 27996-86-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

The intermediate products, 4-(1H-1,2,4-triazol-1-yl)benzaldehyde (TABA), were prepared from 1,2,4-triazole and 4-fluorobenzaldehyde as literature reported. The mixture of TABA (2.424 g, 14 mmol) and 3,4-diaminobenzoic acid (2.890 g, 19 mmol) in 25 mL toluene was refluxed for 4 h at 110 C, then cooled to 5 C and kept on stirring for 15 min, dark yellow precipitate was collected and washed with ice-cold toluene and diethyl ether. The golden yellow microcrystal L1 ligand can be obtained by refluxing the previous precipitate in 70 mL MeOH at 50 C for 10 min (yield: 2.014 g, 46.8%). Elemental analysis: Calc. for C16H13N5O2: C, 62.53; H, 4.26; N, 22.79. Found: C, 62.59; H, 4.30; N, 22.71%. IR (KBr) numax = 3456, 3338, 3152, 2926, 2900, 2800, 2625, 2586, 2555, 2517, 2025, 1680, 1605, 1524, 1410, 1296, 1267, 1210, 1148, 968, 872, 829, 768, 669, 522, 420 cm-1.

The synthetic route of 4-[1,2,4]Triazol-1-yl-benzaldehyde has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ou, Yong-Cong; Chen, Han-Cheng; Liang, Yuan-Hao; Tang, Jun-Jie; Feng, Shao-Bin; Peng, Liang; Wu, Jian-Zhong; Inorganica Chimica Acta; vol. 435; (2015); p. 215 – 222;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-65-5, The chemical industry reduces the impact on the environment during synthesis 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, I believe this compound will play a more active role in future production and life.

Intermediate 84 (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,6-dimethylpyridin-3-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol To a flask containing 1 -methyl- lH-l ,2,3-triazole (275 mg, 3.31 mmol, prepared according to PCX Int. Appl., 2008098104) was added THF (35 mL) and the colorless solution was cooled to – 50 C. Then, kappa-butyllithium (2.5 M in hexanes, 1 ,2 mL, 3.0 mmol) was added dropwise which afforded a dark reddish-brown viscous solution. The mixture was stirred between -20 to -10 C for 30 minutes, then a homogeneous THF solution of (4-chloro-2-methoxy-3-(4- (irifluQromethyl)benzy)quinoh (700 nig, 1.44 mmol in 4 mL THF, Intermediate 12: step f) was introduced at 0 C. The reaction mixture became a dark brown color and was allowed to warm gradually to room temperature. The mixture was stirred for 60 minutes at, room, temperature then quenched with aqueous NH4CI solution. The aqueous portion was extracted with EtOAc, 3 x 50 mL. The combined organics were washed with brine, dried over MgS04, filtered and concentrated to provide a brown oil. Chromatography on silica gel (1% MeOH-DCM increasing to 5% MeOH-DCM) provided the title compound as a light brown solid. Racemic (4~chloro-2-methoxy-3-(4~(trifluorometliyl)benzyl)quinohyl)rnethanol was separated into its individual enantiomers using the following conditions: Chiralcel OD, 20 uM (Diacel) using ethanol with 242 nM detection to give the first eluting enantiomer as Intermediate 84b and the second eluting enantiomer as Intermediate 84c.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methyl-1H-1,2,3-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 27996-86-7, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 27996-86-7 name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Example 127 Preparation of (E)-1-(4-(3-(3,5-Dichlorophenyl)-4,4,4-trifluoro-3-methoxybut-1-en-1-yl)phenyl)-1H-1,2,4-triazole (DC70) Step 1. (E)-3-(4-(1H-1,2,4-triazol-1-yl)phenyl)-1-(3,5-dichlorophenyl)prop-2-en-1-one To a solution of 1-(3,5-dichlorophenyl)ethanone (0.5 g, 2.6 mmol) in ethanol (20 mL) was added 4-(1H-1,2,4-triazol-1-yl)benzaldehyde (0.46 g, 2.65 mmol) and the reaction was cooled to 0 C. Sodium hydroxide (0.22 g, 5.29 mmol) in water (10 mL) was then added and the reaction was allowed to stir for 2 h at 0 C. The reaction was extracted with EtOAc and the combined organic layers were dried over Na2SO4 and concentrated under reduced pressure to afford the title compound (0.149 g, 17%); ESIMS m/z 430.05 ([M+H]+) 344.08

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-[1,2,4]Triazol-1-yl-benzaldehyde, and friends who are interested can also refer to it.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US9211280; (2015); B2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 584-13-4, The chemical industry reduces the impact on the environment during synthesis 584-13-4, name is 4H-1,2,4-Triazol-4-amine, I believe this compound will play a more active role in future production and life.

General procedure: 4-Amino-1,2,4-triazole (0.005 mol) was taken in 150 mL beaker and dissolved in ethanol (10 mL). Equimolar amount of substituted benzaldehyde was added to the ethanolic solution. Then, 0.5 mL of glacial acetic acid was added dropwise to the reaction mixture and stirred with glass rod. The contents were irradiated in MW at 360W for required time with continuous monitoring by TLC. Then the reaction mixture was filtered. Crude product was recrystallized from ethanol to obtain pure compound. Same procedure was repeated but with different amount of catalysts, i.e., 0.75 mL and 1 mL. The progress of reaction was monitored by TLC after 10 s interval. On completion of reaction, resultant mass was filtered and recrystallized from ethanol. The same procedure was used for the synthesis of rest of the compounds.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4H-1,2,4-Triazol-4-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Mhaske, Sadhana D.; Takate, Sushama J.; Dhawale, Rhushikesh N.; Akolkar, Hemantkumar N.; Randhavane, Pratibha V.; Karale, Bhausaheb K.; Indian Journal of Heterocyclic Chemistry; vol. 27; 1; (2017); p. 89 – 97;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-70-2, A common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

D. (2S,4R)-5-Biphenyl-4-yl-2-hydroxymethyl-2-methyl-4-[(3H-[1,2,3]triazole-4-carbon)-amino]-pentanoic acid 2-morpholin-4-yl ethyl ester (R4=H; R7=-(CH2)2-morpholine) (2S,4R)-5-Biphenyl-4-yl-4-t-butoxycarbonylamino-2-hydroxymethyl-2-methyl-pentanoic acid (300 mg, 726 mumol, 1.0 eq.), EDCI (770 muL, 6.0 eq.) and HOBt (590 mg, 4.4 mmol, 6.0 eq.) were dissolved in DCM (6 mL). After stirring for 2 minutes, 4-morpholineethanol (879 muL, 10.0 eq.) was added, and the resulting mixture was stirred for 3 hours at room temperature. The mixture was diluted with DCM and washed with saturated sodium bicarbonate. The organic layer was separated, dried and concentrated. The material was purified (reverse phase column: 5-60% MeCN in water with 0.05% TFA over 30 min; compound eluted between 35-45% MeCN in water) and the clean fractions were combined and lyophilized. MeCN (7.2 mL) and 4 M of HCl in dioxane (720 muL) were added to the lyophilized material. The resulting mixture was stirred at room temperature for 0.5 hour and then the solvent was removed to yield the intermediate. 1,2,3-Triazole-4-carboxylic acid (82 mg, 726 mumol, 1.0 eq.), HATU (280 mg, 720 mumol, 1.0 eq.) and DMF (5.8 mL) were combined and the resulting mixture was stirred for 5 minutes. DIPEA (505 muL, 4.0 eq.) and the intermediate were added, and the mixture was stirred for 30 minutes. The reaction was quenched with AcOH and the product was purified by preparative HPLC to yield the title compound (60 mg, 95% purity). MS m/z [M+H]+ calc’d for C28H35N5O5, 522.26. found 522.4.

The synthetic route of 16681-70-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1455-77-2, A common heterocyclic compound, 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, molecular formula is C2H5N5, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 312-amino-6- [(4-fluorophenyl)methyl] -5-methyl-4H- [ 1 ,2,4] triazolo [5,1-b] pyrimidin-7- oneEthyl 2-[(4-flourophenyl)methyl]-3-methyl-3-oxo-propanoate (314 mg , 1.32 mmol was added to 3-amino-5-amino-triazole (100 mg, 1.2 mmol) followed by glacial acetic acid (2.0 mL) and the reaction was heated at 120 ¡ãC under microwave irradiation for 15 minutes The solvent was evaporated and then basified with sodium hydrogencarbonate. The formed precipitate was filtered and washed with water, dichloromethane and MeCN to give the title compound (160 mg 49percent)1H NMR (400 MHz, DMSO-d6) 2.27 (3H, s), 3.77 (2H, s), 5.95 (2H, s), 7.06 (2H, d), 7.23- 7.25 (2H, m). m/z (ES) (M+H)+ 274.

The synthetic route of 1455-77-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; BENGTSSON, Boel, Ase; BLACKABY, Wesley; CUMMING, John; FAULL, Alan, Wellington; LARSSON, Joakim; NASH, Ian, Alun; OLDHAM, Keith; PAPE, Andrew; WO2011/114148; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8, Computed Properties of C2H3N3

To 2-iodo-5-methylbenzoic acid (1.5 g, 5.72 mmol), copper(I) iodide (1.090 g, 5.72 mmol) and (lR,2R)-N,N’-dimethyl-l,2-cyclohexanediamine (0.814 g, 5.72 mmol) was added DMF (10 ml) under nitrogen and then 2H-l,2,3-triazole (0.474 g, 6.87 mmol). The reaction mixture was heated at 120 C at the microwave Personal Chemistry for 15 minutes. UPLC- MS monitor showed that the reaction was complete. After cooling at room temperature water was added and the aqueous washed with EtOAc. Then the aqueous acidified to pH =1 with aqueous 1 M HC1 and extracted with EtOAc. The phases were separated on a hydrophobic frit, the combined organic solvent was removed to give the crude product (2.4 g).The crude compound was purified by silica gel chromatography (SNAP KP-Sil lOOg cartridge) eluted with 5 CV of a mobile phase prepared with DCM (959.04 ml), acetic acid (0.96 ml) and MeOH (40 ml). The evaporation of proper fractions gave a yellow oil which was triturated with toluene (4 x 50 ml) and the title compound D44 was obtained as yellow solid (540 mg).UPLC (Basic GEN QC): rt = 0.35 minutes, peak observed: 204 (M+l) Ci0H9N3O2 requires: 203.1H NMR (400 MHz, DMSO-d6) delta ppm 2.44 (s, 3 H) 7.52 (dd, 1 H) 7.59 (s, 1 H) 7.64 (d, 1 H) 8.06 (s, 2 H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; GLAXO GROUP LIMITED; DI FABIO, Romano; WO2012/89606; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 15988-11-1, A common heterocyclic compound, 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione, molecular formula is C8H7N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of dimedone (1, 1 mmol), 4-phenylurazole (2, 1 mmol), aromatic aldehyde (3a-h, 1mmol) and S-LCCO nano perovskite (0.01 g) was mixed in a high-pressure Teflon reactor, which was equipped with a magnetic stirrer and an optical fiber, which was implemented to control the reaction’s temperature. The reaction mixture was irradiated by 400 W microwave at 80 oC, for the specified reaction times. TLC with n-hexan:ethylacetate eluent was used to monitor the progress of the reactions. After reaction completion and cooling, the reaction mixtures were filtered and washed with ethanol to separate the catalyst. First, 10 mL water was added to the solution. Then, EtOH/H2O (4:1) was added to crystallize the water insoluble crude products. Then the crystals were filtered to achieve pure products (4a-h).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Zahedi, Najmeh; Javid, Ali; Mohammadi, Mohammad Kazem; Tavakkoli, Haman; Bulletin of the Chemical Society of Ethiopia; vol. 32; 2; (2018); p. 239 – 248;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, A new synthetic method of this compound is introduced below., COA of Formula: C9H7N3O2

Step (vii): tert-butyl N-{4-[(4-methoxyphenyl)methoxy]-2-[2-(2H-l,2,3-triazol-2- yl)benzamido]cyclopentyl}carbamate To a solution of ieri-butyl N-{2-amino-4-[(4- methoxyphenyl)methoxy]cyclopentyl}carbamate (1.71 g, 5.08 mmol) in dry DMF (17 ml) was added 2-(2H-l,2,3-triazol-2-yl)benzoic acid (CAS number 1001401 -62-2; 1.058 g, 5.59 mmol), HATU (2.90 g, 7.62 mmol) and triethylamine (2.125 ml, 15.25 mmol). The reaction was stirred at room temperature for 72 hours. The reaction was partitioned between ethyl acetate and water, washed with brine, dried over magnesium sulfate, concentrated in vacuo and purified by column chromatography (silica, 0-100% ethyl acetate / petrol) to afford the title compound. 1H NMR (400 MHz, DMSO-d6) delta ppm 1.37 (s, 9 H), 1.46 – 1.59 (m, 1 H), 1.58 – 1.77 (m, 1 H), 1.86 – 1.97 (m, 1 H), 2.18 – 2.37 (m, 1 H), 3.67 – 3.79 (m, 4 H), 3.83 – 4.01 (m, 2 H), 4.32 (s, 2 H), 6.85 – 6.95 (m, 2 H), 7.17 – 7.31 (m, 2 H), 7.44 – 7.54 (m, 2 H), 7.55 – 7.66 (m, 1 H), 7.76 (s, 1 H), 7.96 – 8.05 (m, 2 H)MS ES+: 508

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; TAKEDA CAMBRIDGE LIMITED; TAKEDA PHARMACEUTICAL COMPANY LIMITED; FIELDHOUSE, Charlotte; GLEN, Angela; ROBINSON, John Stephen; FUJIMOTO, Tatsuhiko; WO2015/55994; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics